autopep8

1 files changed, 57 insertions, 57 deletions

diff --git a/messages.po b/messages.po
index 074159c4..a5abfb66 100644
--- a/messages.po
+++ b/messages.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PROJECT VERSION\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2018-08-20 20:42-0400\n"
+"POT-Creation-Date: 2018-08-21 20:32-0400\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -146,45 +146,45 @@ msgid ""
 "Negative angles are allowed."
 msgstr ""
 
-#: lib/elements/fill.py:45
+#: lib/elements/fill.py:46
 msgid "Flip fill (start right-to-left)"
 msgstr ""
 
-#: lib/elements/fill.py:46
+#: lib/elements/fill.py:47
 msgid ""
 "The flip option can help you with routing your stitch path.  When you "
 "enable flip, stitching goes from right-to-left instead of left-to-right."
 msgstr ""
 
-#: lib/elements/fill.py:54
+#: lib/elements/fill.py:55
 msgid "Spacing between rows"
 msgstr ""
 
-#: lib/elements/fill.py:55
+#: lib/elements/fill.py:56
 msgid "Distance between rows of stitches."
 msgstr ""
 
-#: lib/elements/fill.py:68
+#: lib/elements/fill.py:69
 msgid "Maximum fill stitch length"
 msgstr ""
 
-#: lib/elements/fill.py:69
+#: lib/elements/fill.py:70
 msgid ""
 "The length of each stitch in a row.  Shorter stitch may be used at the "
 "start or end of a row."
 msgstr ""
 
-#: lib/elements/fill.py:78
+#: lib/elements/fill.py:79
 msgid "Stagger rows this many times before repeating"
 msgstr ""
 
-#: lib/elements/fill.py:79
+#: lib/elements/fill.py:80
 msgid ""
 "Setting this dictates how many rows apart the stitches will be before "
 "they fall in the same column position."
 msgstr ""
 
-#: lib/elements/fill.py:112
+#: lib/elements/fill.py:113
 #, python-format
 msgid ""
 "shape %s is so small that it cannot be filled with stitches.  Please make"
@@ -203,7 +203,7 @@ msgstr ""
 msgid "\"E\" stitch"
 msgstr ""
 
-#: lib/elements/satin_column.py:32 lib/elements/stroke.py:52
+#: lib/elements/satin_column.py:32 lib/elements/stroke.py:53
 msgid "Zig-zag spacing (peak-to-peak)"
 msgstr ""
 
@@ -211,74 +211,74 @@ msgstr ""
 msgid "Peak-to-peak distance between zig-zags."
 msgstr ""
 
-#: lib/elements/satin_column.py:43
+#: lib/elements/satin_column.py:44
 msgid "Pull compensation"
 msgstr ""
 
-#: lib/elements/satin_column.py:44
+#: lib/elements/satin_column.py:45
 msgid ""
 "Satin stitches pull the fabric together, resulting in a column narrower "
 "than you draw in Inkscape.  This setting expands each pair of needle "
 "penetrations outward from the center of the satin column."
 msgstr ""
 
-#: lib/elements/satin_column.py:55
+#: lib/elements/satin_column.py:56
 msgid "Contour underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:55 lib/elements/satin_column.py:62
-#: lib/elements/satin_column.py:71
+#: lib/elements/satin_column.py:56 lib/elements/satin_column.py:63
+#: lib/elements/satin_column.py:72
 msgid "Contour Underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:62 lib/elements/satin_column.py:86
+#: lib/elements/satin_column.py:63 lib/elements/satin_column.py:87
 msgid "Stitch length"
 msgstr ""
 
-#: lib/elements/satin_column.py:68
+#: lib/elements/satin_column.py:69
 msgid "Contour underlay inset amount"
 msgstr ""
 
-#: lib/elements/satin_column.py:69
+#: lib/elements/satin_column.py:70
 msgid ""
 "Shrink the outline, to prevent the underlay from showing around the "
 "outside of the satin column."
 msgstr ""
 
-#: lib/elements/satin_column.py:79
+#: lib/elements/satin_column.py:80
 msgid "Center-walk underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:79 lib/elements/satin_column.py:86
+#: lib/elements/satin_column.py:80 lib/elements/satin_column.py:87
 msgid "Center-Walk Underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:91
+#: lib/elements/satin_column.py:92
 msgid "Zig-zag underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:91 lib/elements/satin_column.py:100
-#: lib/elements/satin_column.py:111
+#: lib/elements/satin_column.py:92 lib/elements/satin_column.py:101
+#: lib/elements/satin_column.py:112
 msgid "Zig-zag Underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:97
+#: lib/elements/satin_column.py:98
 msgid "Zig-Zag spacing (peak-to-peak)"
 msgstr ""
 
-#: lib/elements/satin_column.py:98
+#: lib/elements/satin_column.py:99
 msgid "Distance between peaks of the zig-zags."
 msgstr ""
 
-#: lib/elements/satin_column.py:108
+#: lib/elements/satin_column.py:109
 msgid "Inset amount"
 msgstr ""
 
-#: lib/elements/satin_column.py:109
+#: lib/elements/satin_column.py:110
 msgid "default: half of contour underlay inset"
 msgstr ""
 
-#: lib/elements/satin_column.py:146
+#: lib/elements/satin_column.py:147
 #, python-format
 msgid "satin column: %(id)s: at least two subpaths required (%(num)d found)"
 msgstr ""
@@ -293,22 +293,22 @@ msgstr ""
 msgid "satin column: One or more of the rungs doesn't intersect both rails."
 msgstr ""
 
-#: lib/elements/satin_column.py:179 lib/elements/satin_column.py:181
+#: lib/elements/satin_column.py:180 lib/elements/satin_column.py:183
 msgid "Each rail should intersect both rungs once."
 msgstr ""
 
-#: lib/elements/satin_column.py:181
+#: lib/elements/satin_column.py:182
 msgid ""
 "satin column: One or more of the rungs intersects the rails more than "
 "once."
 msgstr ""
 
-#: lib/elements/satin_column.py:222
+#: lib/elements/satin_column.py:223
 #, python-format
 msgid "satin column: object %s has a fill (but should not)"
 msgstr ""
 
-#: lib/elements/satin_column.py:226
+#: lib/elements/satin_column.py:227
 #, python-format
 msgid ""
 "satin column: object %(id)s has two paths with an unequal number of "
@@ -327,40 +327,40 @@ msgstr ""
 msgid "Length of stitches in running stitch mode."
 msgstr ""
 
-#: lib/elements/stroke.py:42
+#: lib/elements/stroke.py:43
 msgid "Bean stitch number of repeats"
 msgstr ""
 
-#: lib/elements/stroke.py:43
+#: lib/elements/stroke.py:44
 msgid ""
 "Backtrack each stitch this many times.  A value of 1 would triple each "
 "stitch (forward, back, forward).  A value of 2 would quintuple each "
 "stitch, etc.  Only applies to running stitch."
 msgstr ""
 
-#: lib/elements/stroke.py:53
+#: lib/elements/stroke.py:54
 msgid "Length of stitches in zig-zag mode."
 msgstr ""
 
-#: lib/elements/stroke.py:64
+#: lib/elements/stroke.py:65
 msgid "Repeats"
 msgstr ""
 
-#: lib/elements/stroke.py:65
+#: lib/elements/stroke.py:66
 msgid "Defines how many times to run down and back along the path."
 msgstr ""
 
-#: lib/elements/stroke.py:89
+#: lib/elements/stroke.py:90
 msgid "Manual stitch placement"
 msgstr ""
 
-#: lib/elements/stroke.py:90
+#: lib/elements/stroke.py:91
 msgid ""
 "Stitch every node in the path.  Stitch length and zig-zag spacing are "
 "ignored."
 msgstr ""
 
-#: lib/elements/stroke.py:124
+#: lib/elements/stroke.py:125
 msgid ""
 "Legacy running stitch setting detected!\n"
 "\n"
@@ -391,7 +391,7 @@ msgstr ""
 msgid "Only simple lines may be converted to satin columns."
 msgstr ""
 
-#: lib/extensions/convert_to_satin.py:54
+#: lib/extensions/convert_to_satin.py:55
 #, python-format
 msgid ""
 "Cannot convert %s to a satin column because it intersects itself.  Try "
@@ -405,7 +405,7 @@ msgid ""
 "Seeing a 'no such option' message?  Please restart Inkscape to fix."
 msgstr ""
 
-#: lib/extensions/flip.py:35
+#: lib/extensions/flip.py:36
 msgid "Please select one or more satin columns to flip."
 msgstr ""
 
@@ -420,37 +420,37 @@ msgstr ""
 msgid "thread manufacturer color palettes"
 msgstr ""
 
-#: lib/extensions/install.py:32
+#: lib/extensions/install.py:31
 msgid "Ink/Stitch visual commands (Object -> Symbols...)"
 msgstr ""
 
-#: lib/extensions/install.py:41
+#: lib/extensions/install.py:40
 msgid "Install"
 msgstr ""
 
-#: lib/extensions/install.py:44 lib/extensions/params.py:380
+#: lib/extensions/install.py:43 lib/extensions/params.py:380
 msgid "Cancel"
 msgstr ""
 
-#: lib/extensions/install.py:58
+#: lib/extensions/install.py:57
 msgid "Choose Inkscape directory"
 msgstr ""
 
-#: lib/extensions/install.py:68
+#: lib/extensions/install.py:67
 msgid "Inkscape add-on installation failed"
 msgstr ""
 
-#: lib/extensions/install.py:69
+#: lib/extensions/install.py:68
 msgid "Installation Failed"
 msgstr ""
 
-#: lib/extensions/install.py:73
+#: lib/extensions/install.py:72
 msgid ""
 "Inkscape add-on files have been installed.  Please restart Inkscape to "
 "load the new add-ons."
 msgstr ""
 
-#: lib/extensions/install.py:74
+#: lib/extensions/install.py:73
 msgid "Installation Completed"
 msgstr ""
 
@@ -611,7 +611,7 @@ msgstr ""
 #. If you translate this string, that will tell Ink/Stitch to
 #. generate menu items for this language in Inkscape's "Extensions"
 #. menu.
-#: lib/inx/utils.py:43
+#: lib/inx/utils.py:46
 msgid "Generate INX files"
 msgstr ""
 
@@ -663,28 +663,28 @@ msgstr ""
 msgid "Stitch #"
 msgstr ""
 
-#: lib/stitches/auto_fill.py:168
+#: lib/stitches/auto_fill.py:169
 msgid ""
 "Unable to autofill.  This most often happens because your shape is made "
 "up of multiple sections that aren't connected."
 msgstr ""
 
-#: lib/stitches/auto_fill.py:393
+#: lib/stitches/auto_fill.py:398
 msgid ""
 "Unexpected error while generating fill stitches. Please send your SVG "
 "file to lexelby@github."
 msgstr ""
 
-#: lib/svg/svg.py:90
+#: lib/svg/svg.py:94
 msgid "Stitch Plan"
 msgstr ""
 
-#: lib/svg/units.py:44
+#: lib/svg/units.py:45
 #, python-format
 msgid "parseLengthWithUnits: unknown unit %s"
 msgstr ""
 
-#: lib/svg/units.py:76
+#: lib/svg/units.py:77
 #, python-format
 msgid "Unknown unit: %s"
 msgstr ""