new translations from Crowdin

1 files changed, 129 insertions, 109 deletions

diff --git a/translations/messages_hu_HU.po b/translations/messages_hu_HU.po
index 1e909303..6fffd86f 100644
--- a/translations/messages_hu_HU.po
+++ b/translations/messages_hu_HU.po
@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2025-09-01 01:55+0000\n"
-"PO-Revision-Date: 2025-09-23 01:31\n"
+"POT-Creation-Date: 2025-10-11 01:29+0000\n"
+"PO-Revision-Date: 2025-10-11 01:29\n"
 "Last-Translator: \n"
 "Language-Team: Hungarian\n"
 "MIME-Version: 1.0\n"
@@ -12,7 +12,7 @@ msgstr ""
 "Generated-By: Babel 2.17.0\n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-09-01 01:55+0000\n"
+"POT-Creation-Date: 2025-10-11 01:29+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1139,126 +1139,126 @@ msgstr "Szög megfordítása"
 msgid "Flip automatically calculated angle if it appears to be wrong."
 msgstr "Fordítsd meg az automatikusan kiszámított szöget, ha az hibásnak tűnik."
 
-#: lib/elements/element.py:273 lib/gui/preferences.py:59
+#: lib/elements/element.py:283 lib/gui/preferences.py:59
 #: lib/gui/preferences.py:128
 msgid "Minimum stitch length"
 msgstr "Minimális öltéshossz"
 
-#: lib/elements/element.py:274
+#: lib/elements/element.py:284
 msgid "Overwrite global minimum stitch length setting. Shorter stitches than that will be removed."
 msgstr "Felülírja a globális minimális öltéshossz-beállítást. Az ennél rövidebb öltések eltávolításra kerülnek"
 
-#: lib/elements/element.py:284 lib/gui/preferences.py:41
+#: lib/elements/element.py:294 lib/gui/preferences.py:41
 msgid "Minimum jump stitch length"
 msgstr "Minimális ugróöltés hossz"
 
-#: lib/elements/element.py:285
+#: lib/elements/element.py:295
 msgid "Overwrite global minimum jump stitch length setting. Shorter distances to the next object will have no lock stitches."
 msgstr "Felülírja a globális minimális ugróöltés-hossz beállítást. A következő objektumhoz vezető rövidebb távolságok esetén nem kerülnek rögzítőöltések hozzáadásra."
 
-#: lib/elements/element.py:295
+#: lib/elements/element.py:305
 msgid "Allow lock stitches"
 msgstr "Engedélyezze a rögzítő öltéseket"
 
-#: lib/elements/element.py:296
+#: lib/elements/element.py:306
 msgid "Tie thread at the beginning and/or end of this object. Manual stitch will only add lock stitches if force lock stitched is checked."
 msgstr "Kösse el a cérnát az objektum elején és/vagy végén. A kézi öltés csak akkor ad hozzá láncolt öltéseket, ha a „láncolt öltés kényszerítése” be van jelölve."
 
 #. options to allow lock stitch before and after objects
-#: lib/elements/element.py:301
+#: lib/elements/element.py:311
 msgid "Both"
 msgstr "Mindkettő"
 
-#: lib/elements/element.py:301
+#: lib/elements/element.py:311
 msgid "Before"
 msgstr "Előtte"
 
-#: lib/elements/element.py:301
+#: lib/elements/element.py:311
 msgid "After"
 msgstr "Utána"
 
-#: lib/elements/element.py:301
+#: lib/elements/element.py:311
 msgid "Neither"
 msgstr "Egyik sem"
 
-#: lib/elements/element.py:310
+#: lib/elements/element.py:320
 #: inx/inkstitch_lettering_force_lock_stitches.inx:3
 msgid "Force lock stitches"
 msgstr "Kényszerített rögzítőöltések."
 
-#: lib/elements/element.py:311
+#: lib/elements/element.py:321
 msgid "Sew lock stitches after sewing this element, even if the distance to the next object is shorter than defined by the minimum jump stitch length value in the Ink/Stitch preferences."
 msgstr "Rögzítőöltések varrása az elem befejezése után, még akkor is, ha a következő objektumig tartó távolság rövidebb, mint az Ink/Stitch beállításaiban meghatározott minimális ugróöltés-hossz."
 
-#: lib/elements/element.py:323
+#: lib/elements/element.py:333
 msgid "Tack stitch"
 msgstr "Rögzítő öltés"
 
-#: lib/elements/element.py:324
+#: lib/elements/element.py:334
 msgid "Tack down stitch type"
 msgstr "Rögzítőöltés típusa"
 
-#: lib/elements/element.py:334 lib/elements/element.py:380
+#: lib/elements/element.py:344 lib/elements/element.py:390
 msgid "Custom path"
 msgstr "Egyéni görbe"
 
-#: lib/elements/element.py:335
+#: lib/elements/element.py:345
 msgid "Enter a custom path. For svg paths The last node will not be embroidered, but represents the first stitch of the element."
 msgstr "Adjon meg egy egyéni útvonalat. SVG útvonalak esetén az utolsó csomópont nem lesz hímezve, hanem az elem első öltését jelöli."
 
-#: lib/elements/element.py:345 lib/elements/element.py:357
+#: lib/elements/element.py:355 lib/elements/element.py:367
 msgid "Scale tack stitch"
 msgstr "Rögzítőöltés méretezése"
 
-#: lib/elements/element.py:346
+#: lib/elements/element.py:356
 msgid "Set stitch length. A 1 in a custom path equals this values."
 msgstr "Állítsd be az öltéshosszt. Egy „1” érték az egyéni görbében ennek az értéknek felel meg"
 
-#: lib/elements/element.py:358
+#: lib/elements/element.py:368
 msgid "Scale tack stitch by this percentage."
 msgstr "A rögzítőöltés méretezése e százalékos érték alapján."
 
-#: lib/elements/element.py:369
+#: lib/elements/element.py:379
 msgid "Lock stitch"
 msgstr "Rögzítőöltés"
 
-#: lib/elements/element.py:370
+#: lib/elements/element.py:380
 msgid "Lock stitch type"
 msgstr "Rögzítőöltés típusa"
 
-#: lib/elements/element.py:381
+#: lib/elements/element.py:391
 msgid "Enter a custom path. For svg paths the first node will not be embroidered, but represents the last stitch of the element."
 msgstr "Adj meg egy egyéni görbét. SVG görbék esetén az első csomópont nem kerül kihímzésre, hanem az elem utolsó öltését jelöli"
 
-#: lib/elements/element.py:391 lib/elements/element.py:403
+#: lib/elements/element.py:401 lib/elements/element.py:413
 msgid "Scale lock stitch"
 msgstr "Rögzítőöltés méretezése"
 
-#: lib/elements/element.py:392
+#: lib/elements/element.py:402
 msgid "Set length of lock stitches (mm)."
 msgstr "Állítsd be a rögzítőöltések hosszát (mm-ben)."
 
-#: lib/elements/element.py:404
+#: lib/elements/element.py:414
 msgid "Scale lock stitch by this percentage."
 msgstr "A rögzítőöltés méretezése e százalékos érték alapján."
 
-#: lib/elements/element.py:416
+#: lib/elements/element.py:426
 msgid "Trim After"
 msgstr "Vágás utána"
 
-#: lib/elements/element.py:417
+#: lib/elements/element.py:427
 msgid "Add a TRIM command after stitching this object."
 msgstr "Adj hozzá egy TRIM parancsot az objektum kihímzése után"
 
-#: lib/elements/element.py:426
+#: lib/elements/element.py:436
 msgid "Stop After"
 msgstr "Megállás utána"
 
-#: lib/elements/element.py:427
+#: lib/elements/element.py:437
 msgid "Add a STOP command after stitching this object."
 msgstr "Adj hozzá egy STOP parancsot az objektum kihímzése után."
 
-#: lib/elements/element.py:724
+#: lib/elements/element.py:734
 msgid "Please run Extensions > Ink/Stitch > Troubleshoot > Troubleshoot objects. This will show you the exact location of the problem."
 msgstr "Futtasd a Bővítmények > Ink/Stitch > Hibakeresés > Objektumok hibakeresése menüpontot. Ez pontosan megmutatja a probléma helyét"
 
@@ -1662,7 +1662,7 @@ msgstr ""
 msgid "Travel inside the shape when moving from section to section.  Underpath stitches avoid traveling in the direction of the row angle so that they are not visible.  This gives them a jagged appearance."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:455 lib/elements/satin_column.py:366
+#: lib/elements/fill_stitch.py:455 lib/elements/satin_column.py:368
 #: lib/elements/stroke.py:120
 msgid "Running stitch length"
 msgstr ""
@@ -1671,11 +1671,11 @@ msgstr ""
 msgid "Length of stitches around the outline of the fill region used when moving from section to section. Also used for meander and circular fill."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:473 lib/elements/satin_column.py:377
+#: lib/elements/fill_stitch.py:473 lib/elements/satin_column.py:379
 msgid "Running stitch tolerance"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:474 lib/elements/satin_column.py:378
+#: lib/elements/fill_stitch.py:474 lib/elements/satin_column.py:380
 msgid "Determines how hard Ink/Stitch tries to avoid stitching outside the shape.Lower numbers are less likely to stitch outside the shape but require more stitches."
 msgstr ""
 
@@ -1695,7 +1695,7 @@ msgstr ""
 msgid "Amount to vary the length of each stitch by when randomizing."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:525 lib/elements/satin_column.py:502
+#: lib/elements/fill_stitch.py:525 lib/elements/satin_column.py:504
 #: lib/elements/stroke.py:82
 #: lib/sew_stack/stitch_layers/running_stitch/running_stitch_layer.py:33
 #: lib/sew_stack/stitch_layers/running_stitch/running_stitch_layer.py:35
@@ -1716,7 +1716,7 @@ msgid "Backtrack each stitch this many times.  A value of 1 would triple each st
 "A pattern with various repeats can be created with a list of values separated by a space."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:252
+#: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:254
 #: lib/elements/stroke.py:185
 msgid "Zig-zag spacing (peak-to-peak)"
 msgstr ""
@@ -1749,7 +1749,7 @@ msgstr ""
 msgid "Defines width of a herringbone pattern. Use 0 for regular rows."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:605 lib/elements/satin_column.py:280
+#: lib/elements/fill_stitch.py:605 lib/elements/satin_column.py:282
 #: lib/elements/stroke.py:198
 msgid "Pull compensation"
 msgstr ""
@@ -1758,13 +1758,13 @@ msgstr ""
 msgid "Fill stitch can pull the fabric together, resulting in a shape narrower than you draw in Inkscape. This setting expands each row of stitches outward from the center of the row by a fixed length. Two values separated by a space may be used for an asymmetric effect."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:610 lib/elements/satin_column.py:284
-#: lib/elements/satin_column.py:447 lib/elements/satin_column.py:541
+#: lib/elements/fill_stitch.py:610 lib/elements/satin_column.py:286
+#: lib/elements/satin_column.py:449 lib/elements/satin_column.py:543
 #: lib/elements/stroke.py:201
 msgid "mm (each side)"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:621 lib/elements/satin_column.py:265
+#: lib/elements/fill_stitch.py:621 lib/elements/satin_column.py:267
 msgid "Pull compensation percentage"
 msgstr ""
 
@@ -1773,8 +1773,8 @@ msgid "Additional pull compensation which varies as a percentage of row width. T
 msgstr ""
 
 #: lib/elements/fill_stitch.py:625 lib/elements/satin_column.py:134
-#: lib/elements/satin_column.py:144 lib/elements/satin_column.py:268
-#: lib/elements/satin_column.py:462 lib/elements/satin_column.py:561
+#: lib/elements/satin_column.py:144 lib/elements/satin_column.py:270
+#: lib/elements/satin_column.py:464 lib/elements/satin_column.py:563
 msgid "% (each side)"
 msgstr ""
 
@@ -1820,13 +1820,13 @@ msgstr ""
 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:734 lib/elements/satin_column.py:583
+#: lib/elements/fill_stitch.py:734 lib/elements/satin_column.py:585
 #: lib/elements/stroke.py:450 lib/gui/satin_multicolor/colorize_panel.py:61
 #: lib/sew_stack/stitch_layers/mixins/randomization.py:55
 msgid "Random seed"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:735 lib/elements/satin_column.py:584
+#: lib/elements/fill_stitch.py:735 lib/elements/satin_column.py:586
 #: lib/elements/stroke.py:451
 msgid "Use a specific seed for randomized attributes. Uses the element ID if empty."
 msgstr ""
@@ -2051,7 +2051,7 @@ msgstr ""
 msgid "Display needle penetration points in simulator to see the effect of each split method."
 msgstr ""
 
-#: lib/elements/satin_column.py:175 lib/elements/satin_column.py:572
+#: lib/elements/satin_column.py:175 lib/elements/satin_column.py:574
 msgid "Maximum stitch length"
 msgstr ""
 
@@ -2092,192 +2092,192 @@ msgid "Short stitch inset"
 msgstr ""
 
 #: lib/elements/satin_column.py:227
-msgid "Stitches in areas with high density will be inset by this amount."
+msgid "Stitches in areas with high density will be inset by this amount.Two values separated by a space define inset levels if there are multiple consecutive short stitches."
 msgstr ""
 
-#: lib/elements/satin_column.py:237
+#: lib/elements/satin_column.py:239
 msgid "Short stitch distance"
 msgstr ""
 
-#: lib/elements/satin_column.py:238
+#: lib/elements/satin_column.py:240
 msgid "Inset stitches if the distance between stitches is smaller than this."
 msgstr ""
 
-#: lib/elements/satin_column.py:253
+#: lib/elements/satin_column.py:255
 msgid "Peak-to-peak distance between zig-zags. This is double the mm/stitch measurement used by most mechanical machines."
 msgstr ""
 
-#: lib/elements/satin_column.py:266
+#: lib/elements/satin_column.py:268
 msgid "Additional pull compensation which varies as a percentage of stitch width. Two values separated by a space may be used for an asymmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:281
+#: lib/elements/satin_column.py:283
 msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This setting expands each pair of needle penetrations outward from the center of the satin column by a fixed length. Two values separated by a space may be used for an asymmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:295 lib/elements/stroke.py:340
+#: lib/elements/satin_column.py:297 lib/elements/stroke.py:340
 msgid "Automatic"
 msgstr ""
 
-#: lib/elements/satin_column.py:296 lib/elements/stroke.py:341
+#: lib/elements/satin_column.py:298 lib/elements/stroke.py:341
 msgid "Don't reverse"
 msgstr ""
 
-#: lib/elements/satin_column.py:297 lib/elements/stroke.py:342
+#: lib/elements/satin_column.py:299 lib/elements/stroke.py:342
 msgid "Reverse first rail"
 msgstr ""
 
-#: lib/elements/satin_column.py:298 lib/elements/stroke.py:343
+#: lib/elements/satin_column.py:300 lib/elements/stroke.py:343
 msgid "Reverse second rail"
 msgstr ""
 
-#: lib/elements/satin_column.py:299 lib/elements/stroke.py:344
+#: lib/elements/satin_column.py:301 lib/elements/stroke.py:344
 msgid "Reverse both rails"
 msgstr ""
 
-#: lib/elements/satin_column.py:305 lib/elements/stroke.py:350
+#: lib/elements/satin_column.py:307 lib/elements/stroke.py:350
 msgid "Reverse rails"
 msgstr ""
 
-#: lib/elements/satin_column.py:306
+#: lib/elements/satin_column.py:308
 msgid "This may help if your satin renders very strangely.  Default: automatically detect and fix a reversed rail."
 msgstr ""
 
-#: lib/elements/satin_column.py:355
+#: lib/elements/satin_column.py:357
 msgid "Swap rails"
 msgstr ""
 
-#: lib/elements/satin_column.py:356
+#: lib/elements/satin_column.py:358
 msgid "Swaps the first and second rails of the satin column, affecting which side the thread finished on as well as any sided properties"
 msgstr ""
 
-#: lib/elements/satin_column.py:367
+#: lib/elements/satin_column.py:369
 msgid "Length of stitches for start and end point connections."
 msgstr ""
 
-#: lib/elements/satin_column.py:389
+#: lib/elements/satin_column.py:391
 msgid "Running Stitch Position"
 msgstr ""
 
-#: lib/elements/satin_column.py:390
+#: lib/elements/satin_column.py:392
 #, python-format
 msgid "Position of running stitches between the rails. 0% is along the first rail, 50% is centered, 100% is along the second rail."
 msgstr ""
 
-#: lib/elements/satin_column.py:398
+#: lib/elements/satin_column.py:400
 msgid "Start at nearest point"
 msgstr ""
 
-#: lib/elements/satin_column.py:399
+#: lib/elements/satin_column.py:401
 msgid "Start at nearest point to previous element. A start position command will overwrite this setting."
 msgstr ""
 
-#: lib/elements/satin_column.py:406
+#: lib/elements/satin_column.py:408
 msgid "End at nearest point"
 msgstr ""
 
-#: lib/elements/satin_column.py:407
+#: lib/elements/satin_column.py:409
 msgid "End at nearest point to the next element. An end position command will overwrite this setting."
 msgstr ""
 
-#: lib/elements/satin_column.py:413 inx/inkstitch_fill_to_satin.inx:16
+#: lib/elements/satin_column.py:415 inx/inkstitch_fill_to_satin.inx:16
 msgid "Contour underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:413 lib/elements/satin_column.py:420
-#: lib/elements/satin_column.py:434 lib/elements/satin_column.py:446
-#: lib/elements/satin_column.py:461
+#: lib/elements/satin_column.py:415 lib/elements/satin_column.py:422
+#: lib/elements/satin_column.py:436 lib/elements/satin_column.py:448
+#: lib/elements/satin_column.py:463
 msgid "Contour Underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:420 lib/elements/satin_column.py:477
+#: lib/elements/satin_column.py:422 lib/elements/satin_column.py:479
 #: lib/sew_stack/stitch_layers/running_stitch/running_stitch_layer.py:20
 msgid "Stitch length"
 msgstr ""
 
-#: lib/elements/satin_column.py:427 lib/elements/satin_column.py:484
+#: lib/elements/satin_column.py:429 lib/elements/satin_column.py:486
 #: lib/elements/stroke.py:132
 msgid "Stitch tolerance"
 msgstr ""
 
-#: lib/elements/satin_column.py:429
+#: lib/elements/satin_column.py:431
 msgid "All stitches must be within this distance from the path. A lower tolerance means stitches will be closer together. A higher tolerance means sharp corners may be rounded. "
 msgstr ""
 
-#: lib/elements/satin_column.py:444
+#: lib/elements/satin_column.py:446
 msgid "Inset distance (fixed)"
 msgstr ""
 
-#: lib/elements/satin_column.py:445
+#: lib/elements/satin_column.py:447
 msgid "Shrink the outline by a fixed length, to prevent the underlay from showing around the outside of the satin column."
 msgstr ""
 
-#: lib/elements/satin_column.py:458
+#: lib/elements/satin_column.py:460
 msgid "Inset distance (proportional)"
 msgstr ""
 
-#: lib/elements/satin_column.py:459
+#: lib/elements/satin_column.py:461
 msgid "Shrink the outline by a proportion of the column width, to prevent the underlay from showing around the outside of the satin column."
 msgstr ""
 
-#: lib/elements/satin_column.py:470 inx/inkstitch_fill_to_satin.inx:15
+#: lib/elements/satin_column.py:472 inx/inkstitch_fill_to_satin.inx:15
 msgid "Center-walk underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:470 lib/elements/satin_column.py:477
-#: lib/elements/satin_column.py:492 lib/elements/satin_column.py:505
-#: lib/elements/satin_column.py:515
+#: lib/elements/satin_column.py:472 lib/elements/satin_column.py:479
+#: lib/elements/satin_column.py:494 lib/elements/satin_column.py:507
+#: lib/elements/satin_column.py:517
 msgid "Center-Walk Underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:486
+#: lib/elements/satin_column.py:488
 msgid "All stitches must be within this distance from the path. A lower tolerance means stitches will be closer together. A higher tolerance means sharp corners may be rounded. Defaults to stitch length."
 msgstr ""
 
-#: lib/elements/satin_column.py:503
+#: lib/elements/satin_column.py:505
 msgid "For an odd number of repeats, this will reverse the direction the satin column is stitched, causing stitching to both begin and end at the start point."
 msgstr ""
 
-#: lib/elements/satin_column.py:513 lib/gui/tartan/customize_panel.py:38
+#: lib/elements/satin_column.py:515 lib/gui/tartan/customize_panel.py:38
 msgid "Position"
 msgstr ""
 
-#: lib/elements/satin_column.py:514
+#: lib/elements/satin_column.py:516
 #, python-format
 msgid "Position of underlay from between the rails. 0% is along the first rail, 50% is centered, 100% is along the second rail."
 msgstr ""
 
-#: lib/elements/satin_column.py:522 inx/inkstitch_fill_to_satin.inx:17
+#: lib/elements/satin_column.py:524 inx/inkstitch_fill_to_satin.inx:17
 msgid "Zig-zag underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:522 lib/elements/satin_column.py:531
-#: lib/elements/satin_column.py:542 lib/elements/satin_column.py:562
-#: lib/elements/satin_column.py:575
+#: lib/elements/satin_column.py:524 lib/elements/satin_column.py:533
+#: lib/elements/satin_column.py:544 lib/elements/satin_column.py:564
+#: lib/elements/satin_column.py:577
 msgid "Zig-zag Underlay"
 msgstr ""
 
-#: lib/elements/satin_column.py:528
+#: lib/elements/satin_column.py:530
 msgid "Zig-Zag spacing (peak-to-peak)"
 msgstr ""
 
-#: lib/elements/satin_column.py:529
+#: lib/elements/satin_column.py:531
 msgid "Distance between peaks of the zig-zags."
 msgstr ""
 
-#: lib/elements/satin_column.py:539
+#: lib/elements/satin_column.py:541
 msgid "Inset amount (fixed)"
 msgstr ""
 
-#: lib/elements/satin_column.py:540 lib/elements/satin_column.py:560
+#: lib/elements/satin_column.py:542 lib/elements/satin_column.py:562
 msgid "default: half of contour underlay inset"
 msgstr ""
 
-#: lib/elements/satin_column.py:559
+#: lib/elements/satin_column.py:561
 msgid "Inset amount (proportional)"
 msgstr ""
 
-#: lib/elements/satin_column.py:573
+#: lib/elements/satin_column.py:575
 msgid "Split stitch if distance of maximum stitch length is exceeded"
 msgstr ""
 
@@ -2936,7 +2936,7 @@ msgstr ""
 msgid "The maximum value is smaller than the minimum value."
 msgstr ""
 
-#: lib/extensions/lettering_generate_json.py:53
+#: lib/extensions/lettering_generate_json.py:54
 msgid "Please specify a font file."
 msgstr ""
 
@@ -3443,7 +3443,7 @@ msgstr ""
 #: inx/inkstitch_lettering_along_path.inx:25
 #: inx/inkstitch_lettering_custom_font_dir.inx:11
 #: inx/inkstitch_lettering_force_lock_stitches.inx:23
-#: inx/inkstitch_lettering_generate_json.inx:144
+#: inx/inkstitch_lettering_generate_json.inx:146
 #: inx/inkstitch_lettering_organize_glyphs.inx:27
 #: inx/inkstitch_lettering_remove_kerning.inx:12
 #: inx/inkstitch_lettering_set_color_sort_index.inx:11
@@ -3474,19 +3474,19 @@ msgid "Feature to verify or update font information for an existing font."
 msgstr ""
 
 #: lib/gui/edit_json/help_panel.py:33 lib/gui/edit_json/help_panel.py:34
-#: inx/inkstitch_lettering_generate_json.inx:150
+#: inx/inkstitch_lettering_generate_json.inx:152
 msgid "https://inkstitch.org/docs/font-tools/#edit-json"
 msgstr ""
 
-#: lib/gui/edit_json/main_panel.py:401 lib/gui/edit_json/main_panel.py:414
+#: lib/gui/edit_json/main_panel.py:416 lib/gui/edit_json/main_panel.py:429
 msgid "Could not read json file."
 msgstr ""
 
-#: lib/gui/edit_json/main_panel.py:405
+#: lib/gui/edit_json/main_panel.py:420
 msgid "Changes will not be saved: cannot write to json file (permission denied)."
 msgstr ""
 
-#: lib/gui/edit_json/main_panel.py:419
+#: lib/gui/edit_json/main_panel.py:434
 msgid "Could not write to json file: permission denied."
 msgstr ""
 
@@ -3595,6 +3595,14 @@ msgid "Horizontal advance x"
 msgstr ""
 
 #: lib/gui/edit_json/settings_panel.py:239
+msgid "Glyph width"
+msgstr ""
+
+#: lib/gui/edit_json/settings_panel.py:240
+msgid "Use the width of the individual glyphs."
+msgstr ""
+
+#: lib/gui/edit_json/settings_panel.py:245
 msgid "Horizontal advance x space"
 msgstr ""
 
@@ -5488,7 +5496,7 @@ msgstr ""
 #: inx/inkstitch_lettering_along_path.inx:37
 #: inx/inkstitch_lettering_custom_font_dir.inx:16
 #: inx/inkstitch_lettering_force_lock_stitches.inx:34
-#: inx/inkstitch_lettering_generate_json.inx:148
+#: inx/inkstitch_lettering_generate_json.inx:150
 #: inx/inkstitch_lettering_remove_kerning.inx:22
 #: inx/inkstitch_lettering_set_color_sort_index.inx:19
 #: inx/inkstitch_letters_to_font.inx:75 inx/inkstitch_outline.inx:28
@@ -5602,7 +5610,7 @@ msgstr ""
 msgid "https://inkstitch.org/docs/fill-tools/#break-apart-fill-objects"
 msgstr ""
 
-#: inx/inkstitch_break_apart.inx:28 inx/inkstitch_transform_elements.inx:27
+#: inx/inkstitch_break_apart.inx:28
 msgid "Break apart and repair (broken) fill shapes"
 msgstr ""
 
@@ -7137,15 +7145,23 @@ msgstr ""
 msgid "Letter spacing (default: 100)"
 msgstr ""
 
-#: inx/inkstitch_lettering_generate_json.inx:145
+#: inx/inkstitch_lettering_generate_json.inx:140
+msgid "Use glyph width"
+msgstr ""
+
+#: inx/inkstitch_lettering_generate_json.inx:140
+msgid "Use glyph width to define letter spacing."
+msgstr ""
+
+#: inx/inkstitch_lettering_generate_json.inx:147
 msgid "Generates font.json which can be used by the lettering tool."
 msgstr ""
 
-#: inx/inkstitch_lettering_generate_json.inx:146
+#: inx/inkstitch_lettering_generate_json.inx:148
 msgid "The generated file can be updated with Extensions > Ink/Stitch > Font Management > Edit JSON."
 msgstr ""
 
-#: inx/inkstitch_lettering_generate_json.inx:149
+#: inx/inkstitch_lettering_generate_json.inx:151
 msgid "https://inkstitch.org/docs/font-tools/#generate-json"
 msgstr ""
 
@@ -8318,6 +8334,10 @@ msgstr ""
 msgid "https://inkstitch.org/docs/edit/#transform"
 msgstr ""
 
+#: inx/inkstitch_transform_elements.inx:27
+msgid "Rotate or flip embroidery elements while also transforming stitch angles."
+msgstr ""
+
 #: inx/inkstitch_troubleshoot.inx:3
 msgid "Troubleshoot Objects"
 msgstr ""