new translations from Crowdin

1 files changed, 120 insertions, 84 deletions

diff --git a/translations/messages_nl_NL.po b/translations/messages_nl_NL.po
index 97e6bc80..e212212a 100644
--- a/translations/messages_nl_NL.po
+++ b/translations/messages_nl_NL.po
@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2022-06-22 02:34+0000\n"
-"PO-Revision-Date: 2022-06-22 02:35\n"
+"POT-Creation-Date: 2022-06-23 02:23+0000\n"
+"PO-Revision-Date: 2022-06-24 02:26\n"
 "Last-Translator: \n"
 "Language-Team: Dutch\n"
 "MIME-Version: 1.0\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-06-22 02:34+0000\n"
+"POT-Creation-Date: 2022-06-23 02:23+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -754,7 +754,7 @@ msgstr "Kleine Opvulling"
 msgid "This fill object is so small that it would probably look better as running stitch or satin column. For very small shapes, fill stitch is not possible, and Ink/Stitch will use running stitch around the outline instead."
 msgstr "Dit invulobject is zo klein dat het er waarschijnlijk beter uitziet als doorlopende steek of satijnbaan. Voor hele kleine vormen is invulsteek niet mogelijk, Ink/Stitch zal inplaats daarvan een doorlopende steek langs de rand maken."
 
-#: lib/elements/fill_stitch.py:35 lib/elements/fill_stitch.py:443
+#: lib/elements/fill_stitch.py:35 lib/elements/fill_stitch.py:465
 msgid "Expand"
 msgstr "Uitbreiden"
 
@@ -762,7 +762,7 @@ msgstr "Uitbreiden"
 msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:41 lib/elements/fill_stitch.py:420
+#: lib/elements/fill_stitch.py:41 lib/elements/fill_stitch.py:442
 msgid "Inset"
 msgstr "Inzet"
 
@@ -868,159 +868,183 @@ msgid "Legacy Fill"
 msgstr ""
 
 #: lib/elements/fill_stitch.py:114
-msgid "Contour Fill Strategy"
+msgid "Guided Fill Strategy"
 msgstr ""
 
 #: lib/elements/fill_stitch.py:115
-msgid "Inner to Outer"
+msgid "Copy"
 msgstr ""
 
 #: lib/elements/fill_stitch.py:115
+msgid "Parallel Offset"
+msgstr ""
+
+#: lib/elements/fill_stitch.py:116
+msgid "Copy (the default) will fill the shape with shifted copies of the line.Parallel offset will ensure that each line is always a consistent distance from its neighbor.Sharp corners may be introduced."
+msgstr ""
+
+#: lib/elements/fill_stitch.py:123
+msgid "Contour Fill Strategy"
+msgstr ""
+
+#: lib/elements/fill_stitch.py:124
+msgid "Inner to Outer"
+msgstr ""
+
+#: lib/elements/fill_stitch.py:124
 msgid "Single spiral"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:115
+#: lib/elements/fill_stitch.py:124
 msgid "Double spiral"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:120
+#: lib/elements/fill_stitch.py:129
 msgid "Join Style"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:121
+#: lib/elements/fill_stitch.py:130
 msgid "Round"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:121
+#: lib/elements/fill_stitch.py:130
 msgid "Mitered"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:121
+#: lib/elements/fill_stitch.py:130
 msgid "Beveled"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:126
+#: lib/elements/fill_stitch.py:135
 msgid "Avoid self-crossing"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:131
+#: lib/elements/fill_stitch.py:140
 msgid "Clockwise"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:137
+#: lib/elements/fill_stitch.py:146
 msgid "Angle of lines of stitches"
 msgstr "Hoek van de lijnen van de steken"
 
-#: lib/elements/fill_stitch.py:138
+#: lib/elements/fill_stitch.py:147
 msgid "The angle increases in a counter-clockwise direction.  0 is horizontal.  Negative angles are allowed."
 msgstr "De hoek neemt toe tegen de klok in. 0 is horizontaal. Negatieve waarden zijn toegestaan."
 
-#: lib/elements/fill_stitch.py:156 lib/elements/fill_stitch.py:432
+#: lib/elements/fill_stitch.py:165 lib/elements/fill_stitch.py:454
 msgid "Skip last stitch in each row"
 msgstr "Sla de laatste steek in elke rij over"
 
-#: lib/elements/fill_stitch.py:157 lib/elements/fill_stitch.py:433
+#: lib/elements/fill_stitch.py:166 lib/elements/fill_stitch.py:455
 msgid "The last stitch in each row is quite close to the first stitch in the next row.  Skipping it decreases stitch count and density."
 msgstr "De laatste steek in elke rij is vrij dicht op de eerste steek in de volgende rij. Door deze over te slaan wordt de dichtheid en het aantal steken verkleind."
 
-#: lib/elements/fill_stitch.py:170
+#: lib/elements/fill_stitch.py:179
 msgid "Flip fill (start right-to-left)"
 msgstr "Draai opvulling om (start rechts-naar-links)"
 
-#: lib/elements/fill_stitch.py:171
+#: lib/elements/fill_stitch.py:180
 msgid "The flip option can help you with routing your stitch path.  When you enable flip, stitching goes from right-to-left instead of left-to-right."
 msgstr "De omdraai optie kan je helpen met het routeren van je steekpad. Als je omdraaien kiest, gaat het borduren van rechts naar links in plaats van van links naar rechts."
 
-#: lib/elements/fill_stitch.py:182
+#: lib/elements/fill_stitch.py:191
 msgid "Spacing between rows"
 msgstr "Afstand tussen rijen"
 
-#: lib/elements/fill_stitch.py:183
+#: lib/elements/fill_stitch.py:192
 msgid "Distance between rows of stitches."
 msgstr "Afstand tussen rijen van steken."
 
-#: lib/elements/fill_stitch.py:197
+#: lib/elements/fill_stitch.py:206
 msgid "Maximum fill stitch length"
 msgstr "Maximale opvulsteeklengte"
 
-#: lib/elements/fill_stitch.py:198
+#: lib/elements/fill_stitch.py:207
 msgid "The length of each stitch in a row.  Shorter stitch may be used at the start or end of a row."
 msgstr "De lengte van elke steek in een rij. Een kortere steek kan worden gebruikt aan het begin of einde van een rij."
 
-#: lib/elements/fill_stitch.py:209
+#: lib/elements/fill_stitch.py:218
 msgid "Stagger rows this many times before repeating"
 msgstr "Spring rijen zoveel keer in voordat herhaald wordt"
 
-#: lib/elements/fill_stitch.py:210
+#: lib/elements/fill_stitch.py:219
 msgid "Setting this dictates how many rows apart the stitches will be before they fall in the same column position."
 msgstr "Deze instelling geeft aan hoeveel rijen uitelkaar de steken liggen voordat ze in dezelfde kolom positie vallen."
 
-#: lib/elements/fill_stitch.py:359
+#: lib/elements/fill_stitch.py:368
 msgid "Running stitch length (traversal between sections)"
 msgstr "Doorlopende steek lengte (afstand tussen secties)"
 
-#: lib/elements/fill_stitch.py:360
+#: lib/elements/fill_stitch.py:369
 msgid "Length of stitches around the outline of the fill region used when moving from section to section."
 msgstr "Lengte van steken rondom de rand van het opvulgebied dat wordt gebruikt bij de overgang tussen secties."
 
-#: lib/elements/fill_stitch.py:370
+#: lib/elements/fill_stitch.py:380 lib/elements/stroke.py:116
+msgid "Running stitch tolerance"
+msgstr ""
+
+#: lib/elements/fill_stitch.py:381
+msgid "All stitches must be within this distance of the path.  A lower tolerance means stitches will be closer together.  A higher tolerance means sharp corners may be rounded."
+msgstr ""
+
+#: lib/elements/fill_stitch.py:392
 msgid "Underlay"
 msgstr "Versteviging"
 
-#: lib/elements/fill_stitch.py:370 lib/elements/fill_stitch.py:379
-#: lib/elements/fill_stitch.py:402 lib/elements/fill_stitch.py:413
-#: lib/elements/fill_stitch.py:423 lib/elements/fill_stitch.py:435
-#: lib/elements/fill_stitch.py:473
+#: lib/elements/fill_stitch.py:392 lib/elements/fill_stitch.py:401
+#: lib/elements/fill_stitch.py:424 lib/elements/fill_stitch.py:435
+#: lib/elements/fill_stitch.py:445 lib/elements/fill_stitch.py:457
+#: lib/elements/fill_stitch.py:495
 msgid "Fill Underlay"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:376
+#: lib/elements/fill_stitch.py:398
 msgid "Fill angle"
 msgstr "Opvul hoek"
 
-#: lib/elements/fill_stitch.py:377
+#: lib/elements/fill_stitch.py:399
 msgid "Default: fill angle + 90 deg. Insert comma-seperated list for multiple layers."
 msgstr "Standaard: opvul hoek + 90 graden. Voer een kommagescheiden lijst in voor meerdere lagen."
 
-#: lib/elements/fill_stitch.py:399
+#: lib/elements/fill_stitch.py:421
 msgid "Row spacing"
 msgstr "Opvulrij afstand"
 
-#: lib/elements/fill_stitch.py:400
+#: lib/elements/fill_stitch.py:422
 msgid "default: 3x fill row spacing"
 msgstr "standaard: 3x opvulrij afstand"
 
-#: lib/elements/fill_stitch.py:410
+#: lib/elements/fill_stitch.py:432
 msgid "Max stitch length"
 msgstr "Max steek lengte"
 
-#: lib/elements/fill_stitch.py:411
+#: lib/elements/fill_stitch.py:433
 msgid "default: equal to fill max stitch length"
 msgstr "standaard: gelijk aan max steek lengte"
 
-#: lib/elements/fill_stitch.py:421
+#: lib/elements/fill_stitch.py:443
 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill."
 msgstr "Verklein de vorm van de versteviging om te voorkomen dat de versteviging zichtbaar is aan de buitenkant van de opvulling."
 
-#: lib/elements/fill_stitch.py:444
+#: lib/elements/fill_stitch.py:466
 msgid "Expand the shape before fill stitching, to compensate for gaps between shapes."
 msgstr "Breidt de vorm uit voor de opvulsteken om te compenseren voor gaten tussen de vormen."
 
-#: lib/elements/fill_stitch.py:455 lib/elements/fill_stitch.py:469
+#: lib/elements/fill_stitch.py:477 lib/elements/fill_stitch.py:491
 msgid "Underpath"
 msgstr "Onderpad"
 
-#: lib/elements/fill_stitch.py:456 lib/elements/fill_stitch.py:470
+#: lib/elements/fill_stitch.py:478 lib/elements/fill_stitch.py:492
 msgid "Travel inside the shape when moving from section to section.  Underpath stitches avoid traveling in the direction of the row angle so that they are not visible.  This gives them a jagged appearance."
 msgstr "Beweeg binnen de vorm bij verplaatsen tussen secties. Onderpad steken vermijden de richting van de rijhoek zodat ze niet zichtbaar zijn. Dit geeft ze een gekarteld uiterlijk."
 
-#: lib/elements/fill_stitch.py:670
+#: lib/elements/fill_stitch.py:701
 msgid "Error during autofill!  This means that there is a problem with Ink/Stitch."
 msgstr "Fout tijdens auto-opvullen! Dit betekent dat er een probleem met Ink/Stitch is."
 
 #. this message is followed by a URL:
 #. https://github.com/inkstitch/inkstitch/issues/new
-#: lib/elements/fill_stitch.py:673
+#: lib/elements/fill_stitch.py:704
 msgid "If you'd like to help us make Ink/Stitch better, please paste this whole message into a new issue at: "
 msgstr "Als je wilt helpen om Ink/Stitch beter te maken, plak onderstaande tekst dan in een nieuwe melding op: "
 
@@ -1208,7 +1232,7 @@ msgstr ""
 msgid "Maximum stitch length for split stitches."
 msgstr ""
 
-#: lib/elements/satin_column.py:108 lib/elements/stroke.py:116
+#: lib/elements/satin_column.py:108 lib/elements/stroke.py:129
 msgid "Zig-zag spacing (peak-to-peak)"
 msgstr "Zig-zag afstand (piek-naar-piek)"
 
@@ -1352,118 +1376,122 @@ msgid "Length of stitches in running stitch mode."
 msgstr "Lengte van steken in doorlopende steek modus."
 
 #: lib/elements/stroke.py:117
+msgid "All stitches must be within this distance from the path.  A lower tolerance means stitches will be closer together.  A higher tolerance means sharp corners may be rounded."
+msgstr ""
+
+#: lib/elements/stroke.py:130
 msgid "Length of stitches in zig-zag mode."
 msgstr "Lengte van steken in zig-zag modus."
 
-#: lib/elements/stroke.py:129
+#: lib/elements/stroke.py:142
 msgid "Number of lines"
 msgstr ""
 
-#: lib/elements/stroke.py:130
+#: lib/elements/stroke.py:143
 msgid "Number of lines from start to finish"
 msgstr ""
 
-#: lib/elements/stroke.py:146
+#: lib/elements/stroke.py:159
 msgid "Skip first lines"
 msgstr ""
 
-#: lib/elements/stroke.py:147
+#: lib/elements/stroke.py:160
 msgid "Skip this number of lines at the beginning."
 msgstr ""
 
-#: lib/elements/stroke.py:158
+#: lib/elements/stroke.py:171
 msgid "Skip last lines"
 msgstr ""
 
-#: lib/elements/stroke.py:159
+#: lib/elements/stroke.py:172
 msgid "Skip this number of lines at the end"
 msgstr ""
 
-#: lib/elements/stroke.py:182
+#: lib/elements/stroke.py:195
 msgid "Line distance exponent"
 msgstr ""
 
-#: lib/elements/stroke.py:183
+#: lib/elements/stroke.py:196
 msgid "Increase density towards one side."
 msgstr ""
 
-#: lib/elements/stroke.py:194
+#: lib/elements/stroke.py:207
 msgid "Flip exponent"
 msgstr ""
 
-#: lib/elements/stroke.py:195
+#: lib/elements/stroke.py:208
 msgid "Reverse exponent effect."
 msgstr ""
 
-#: lib/elements/stroke.py:206
+#: lib/elements/stroke.py:219
 msgid "Reverse"
 msgstr ""
 
-#: lib/elements/stroke.py:207
+#: lib/elements/stroke.py:220
 msgid "Flip start and end point"
 msgstr ""
 
-#: lib/elements/stroke.py:218
+#: lib/elements/stroke.py:231
 msgid "Grid size"
 msgstr ""
 
-#: lib/elements/stroke.py:219
+#: lib/elements/stroke.py:232
 msgid "Render as grid. Use with care and watch your stitch density."
 msgstr ""
 
-#: lib/elements/stroke.py:231
+#: lib/elements/stroke.py:244
 msgid "Scale axis"
 msgstr ""
 
-#: lib/elements/stroke.py:232
+#: lib/elements/stroke.py:245
 msgid "Scale axis for satin guided ripple stitches."
 msgstr ""
 
-#: lib/elements/stroke.py:236
+#: lib/elements/stroke.py:249
 msgid "X Y"
 msgstr ""
 
-#: lib/elements/stroke.py:236
+#: lib/elements/stroke.py:249
 msgid "X"
 msgstr ""
 
-#: lib/elements/stroke.py:236
+#: lib/elements/stroke.py:249
 msgid "Y"
 msgstr ""
 
-#: lib/elements/stroke.py:236 print/templates/ui.html:172
+#: lib/elements/stroke.py:249 print/templates/ui.html:172
 msgid "None"
 msgstr "Geen"
 
-#: lib/elements/stroke.py:244
+#: lib/elements/stroke.py:257
 msgid "Starting scale"
 msgstr ""
 
-#: lib/elements/stroke.py:245
+#: lib/elements/stroke.py:258
 msgid "How big the first copy of the line should be, in percent."
 msgstr ""
 
-#: lib/elements/stroke.py:245 lib/elements/stroke.py:256
+#: lib/elements/stroke.py:258 lib/elements/stroke.py:269
 msgid "Used only for ripple stitch with a guide line."
 msgstr ""
 
-#: lib/elements/stroke.py:255
+#: lib/elements/stroke.py:268
 msgid "Ending scale"
 msgstr ""
 
-#: lib/elements/stroke.py:256
+#: lib/elements/stroke.py:269
 msgid "How big the last copy of the line should be, in percent."
 msgstr ""
 
-#: lib/elements/stroke.py:266
+#: lib/elements/stroke.py:279
 msgid "Rotate"
 msgstr ""
 
-#: lib/elements/stroke.py:267
+#: lib/elements/stroke.py:280
 msgid "Rotate satin guided ripple stitches"
 msgstr ""
 
-#: lib/elements/stroke.py:348
+#: lib/elements/stroke.py:361
 msgid "Legacy running stitch setting detected!\n\n"
 "It looks like you're using a stroke smaller than 0.5 units to indicate a running stitch, which is deprecated.  Instead, please set your stroke to be dashed to indicate running stitch.  Any kind of dash will work."
 msgstr "Verouderde doorlopende steek instelling gedetecteerd!\n\n"
@@ -1866,39 +1894,39 @@ msgstr ""
 msgid "It is possible, that one object contains more than one error, yet there will be only one pointer per object.  Run this function again, when further errors occur.  Remove pointers by deleting the layer named \"Troubleshoot\" through the objects panel (Object -> Objects...)."
 msgstr "Het is mogelijk dat een object meer dan één fout bevat, er is echter slechts éé'n pointer per object. Voer de functie opnieuw uit als er meer fouten optreden. Verwijder pointers door de laag met naam \"Probleemoplossen\" te verwijderen via het objecten paneel (Object -> Objecten...)."
 
-#: lib/extensions/zip.py:62
+#: lib/extensions/zip.py:63
 msgid "threadlist"
 msgstr "garenlijst"
 
-#: lib/extensions/zip.py:71
+#: lib/extensions/zip.py:72
 msgid "No embroidery file formats selected."
 msgstr "Geen borduurbestand formaten geselecteerd."
 
-#: lib/extensions/zip.py:99
+#: lib/extensions/zip.py:100
 msgid "Design Details"
 msgstr "Ontwerp Details"
 
-#: lib/extensions/zip.py:102
+#: lib/extensions/zip.py:103
 msgid "Title"
 msgstr "Titel"
 
-#: lib/extensions/zip.py:103 inx/inkstitch_commands_scale_symbols.inx:6
+#: lib/extensions/zip.py:104 inx/inkstitch_commands_scale_symbols.inx:6
 msgid "Size"
 msgstr "Grootte"
 
-#: lib/extensions/zip.py:104
+#: lib/extensions/zip.py:105
 msgid "Stitches"
 msgstr "Steken"
 
-#: lib/extensions/zip.py:105
+#: lib/extensions/zip.py:106
 msgid "Colors"
 msgstr "Kleuren"
 
-#: lib/extensions/zip.py:107
+#: lib/extensions/zip.py:108
 msgid "Thread Order"
 msgstr "Garen Volgorde"
 
-#: lib/extensions/zip.py:120
+#: lib/extensions/zip.py:121
 msgid "Thread Used"
 msgstr "Garen Gebruikt"
 
@@ -2089,7 +2117,7 @@ msgstr "AutoSatijn %d"
 msgid "AutoSatin Running Stitch %d"
 msgstr "AutoSatijn Doorlopende Steek %d"
 
-#: lib/stitches/guided_fill.py:120
+#: lib/stitches/guided_fill.py:118
 msgid "Guide line (or offset copy) is self crossing!"
 msgstr ""
 
@@ -3204,6 +3232,14 @@ msgstr ""
 msgid "Jump stitches smaller than this will be treated as normal stitches."
 msgstr ""
 
+#: inx/inkstitch_embroider_settings.inx:20
+msgid "Minimal stitch length (mm)"
+msgstr ""
+
+#: inx/inkstitch_embroider_settings.inx:20
+msgid "Drop stitches smaller than this value."
+msgstr ""
+
 #: inx/inkstitch_flip.inx:3
 msgid "Flip Satin Column Rails"
 msgstr "Wissel Satijnbaan Rails om"