new translations from Crowdin

1 files changed, 405 insertions, 154 deletions

diff --git a/translations/messages_nl_NL.po b/translations/messages_nl_NL.po
index e212212a..053dbc9a 100644
--- a/translations/messages_nl_NL.po
+++ b/translations/messages_nl_NL.po
@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2022-06-23 02:23+0000\n"
-"PO-Revision-Date: 2022-06-24 02:26\n"
+"POT-Creation-Date: 2022-06-25 02:44+0000\n"
+"PO-Revision-Date: 2022-06-25 02:46\n"
 "Last-Translator: \n"
 "Language-Team: Dutch\n"
 "MIME-Version: 1.0\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-06-23 02:23+0000\n"
+"POT-Creation-Date: 2022-06-25 02:44+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1224,7 +1224,7 @@ msgstr "Aangepaste satijnbaan"
 msgid "\"E\" stitch"
 msgstr "\"E\" steek"
 
-#: lib/elements/satin_column.py:96 lib/elements/satin_column.py:209
+#: lib/elements/satin_column.py:96 lib/elements/satin_column.py:227
 msgid "Maximum stitch length"
 msgstr ""
 
@@ -1232,82 +1232,98 @@ msgstr ""
 msgid "Maximum stitch length for split stitches."
 msgstr ""
 
-#: lib/elements/satin_column.py:108 lib/elements/stroke.py:129
+#: lib/elements/satin_column.py:104
+msgid "Short stitch inset"
+msgstr ""
+
+#: lib/elements/satin_column.py:105
+msgid "Stitches in areas with high density will be shortened by this amount."
+msgstr ""
+
+#: lib/elements/satin_column.py:113
+msgid "Short stitch distance"
+msgstr ""
+
+#: lib/elements/satin_column.py:114
+msgid "Do short stitches if the distance between stitches is smaller than this."
+msgstr ""
+
+#: lib/elements/satin_column.py:126 lib/elements/stroke.py:129
 msgid "Zig-zag spacing (peak-to-peak)"
 msgstr "Zig-zag afstand (piek-naar-piek)"
 
-#: lib/elements/satin_column.py:109
+#: lib/elements/satin_column.py:127
 msgid "Peak-to-peak distance between zig-zags."
 msgstr "Piek-naar-piek afstand tussen zig-zag steken."
 
-#: lib/elements/satin_column.py:120
+#: lib/elements/satin_column.py:138
 msgid "Pull compensation"
 msgstr "Trek compensatie"
 
-#: lib/elements/satin_column.py:121
+#: lib/elements/satin_column.py:139
 msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape.  This setting expands each pair of needle penetrations outward from the center of the satin column."
 msgstr "Satijnsteken trekken de stof samen, waardoor de baan smaller wordt dan getekend in Inkscape. Deze instelling zet ieder paar naaldsteken wat verder weg van het midden van de satijnbaan."
 
-#: lib/elements/satin_column.py:133
+#: lib/elements/satin_column.py:151
 msgid "Contour underlay"
 msgstr "Omtrek versteviging"
 
-#: lib/elements/satin_column.py:133 lib/elements/satin_column.py:140
-#: lib/elements/satin_column.py:149
+#: lib/elements/satin_column.py:151 lib/elements/satin_column.py:158
+#: lib/elements/satin_column.py:167
 msgid "Contour Underlay"
 msgstr "Omtrek Versteviging"
 
-#: lib/elements/satin_column.py:140 lib/elements/satin_column.py:164
+#: lib/elements/satin_column.py:158 lib/elements/satin_column.py:182
 msgid "Stitch length"
 msgstr "Steek lengte"
 
-#: lib/elements/satin_column.py:146
+#: lib/elements/satin_column.py:164
 msgid "Contour underlay inset amount"
 msgstr "Omtrekversteviging randafstand"
 
-#: lib/elements/satin_column.py:147
+#: lib/elements/satin_column.py:165
 msgid "Shrink the outline, to prevent the underlay from showing around the outside of the satin column."
 msgstr "Verklein de omtrek om te voorkomen dat de versteviging zichtbaar is langs de rand van de satijnbaan."
 
-#: lib/elements/satin_column.py:157
+#: lib/elements/satin_column.py:175
 msgid "Center-walk underlay"
 msgstr "Middenlijn versteviging"
 
-#: lib/elements/satin_column.py:157 lib/elements/satin_column.py:164
-#: lib/elements/satin_column.py:169
+#: lib/elements/satin_column.py:175 lib/elements/satin_column.py:182
+#: lib/elements/satin_column.py:187
 msgid "Center-Walk Underlay"
 msgstr "Middenlijn Versteviging"
 
-#: lib/elements/satin_column.py:169 lib/elements/stroke.py:82
+#: lib/elements/satin_column.py:187 lib/elements/stroke.py:82
 msgid "Repeats"
 msgstr "Herhalingen"
 
-#: lib/elements/satin_column.py:174
+#: lib/elements/satin_column.py:192
 msgid "Zig-zag underlay"
 msgstr "Zig-zag versteviging"
 
-#: lib/elements/satin_column.py:174 lib/elements/satin_column.py:183
-#: lib/elements/satin_column.py:194 lib/elements/satin_column.py:212
+#: lib/elements/satin_column.py:192 lib/elements/satin_column.py:201
+#: lib/elements/satin_column.py:212 lib/elements/satin_column.py:230
 msgid "Zig-zag Underlay"
 msgstr "Zig-zag Versteviging"
 
-#: lib/elements/satin_column.py:180
+#: lib/elements/satin_column.py:198
 msgid "Zig-Zag spacing (peak-to-peak)"
 msgstr "Zig-zag afstand (piek-naar-piek)"
 
-#: lib/elements/satin_column.py:181
+#: lib/elements/satin_column.py:199
 msgid "Distance between peaks of the zig-zags."
 msgstr "Afstand tussen pieken van de zig-zag steken."
 
-#: lib/elements/satin_column.py:191
+#: lib/elements/satin_column.py:209
 msgid "Inset amount"
 msgstr "Randafstand"
 
-#: lib/elements/satin_column.py:192
+#: lib/elements/satin_column.py:210
 msgid "default: half of contour underlay inset"
 msgstr "standaard: de helft van de versteviging randafstand"
 
-#: lib/elements/satin_column.py:210
+#: lib/elements/satin_column.py:228
 msgid "Split stitch if distance of maximum stitch length is exceeded"
 msgstr ""
 
@@ -1513,24 +1529,24 @@ msgstr "* Tekst: Creëer je eigen letters of probeer het belettering gereedchap:
 msgid "- Extensions > Ink/Stitch > Lettering"
 msgstr "- Extenties > Ink/Stitch > Belettering"
 
-#: lib/extensions/apply_threadlist.py:38
+#: lib/extensions/apply_threadlist.py:70
 msgid "File not found."
 msgstr "Bestand niet gevonden."
 
-#: lib/extensions/apply_threadlist.py:41
+#: lib/extensions/apply_threadlist.py:73
 msgid "The filepath specified is not a file but a dictionary.\n"
 "Please choose a threadlist file to import."
 msgstr ""
 
-#: lib/extensions/apply_threadlist.py:51
+#: lib/extensions/apply_threadlist.py:78
 msgid "Couldn't find any matching colors in the file."
 msgstr "Geen overeenkomende kleuren gevonden in het bestand."
 
-#: lib/extensions/apply_threadlist.py:53
+#: lib/extensions/apply_threadlist.py:80
 msgid "Please try to import as \"other threadlist\" and specify a color palette below."
 msgstr "Probeer als \"overige garenlijst\" te importeren en geef hieronder een kleurpalet op."
 
-#: lib/extensions/apply_threadlist.py:55
+#: lib/extensions/apply_threadlist.py:82
 msgid "Please chose an other color palette for your design."
 msgstr "Kies een ander kleurpalet voor je ontwerp."
 
@@ -1668,6 +1684,10 @@ msgstr ""
 msgid "We couldn't find any fill colors on your text elements. Please read the instructions on our website."
 msgstr ""
 
+#: lib/extensions/input.py:18
+msgid "Ink/Stitch cannot import color formats directly. But you can open the embroidery file and apply the color with Extensions > Ink/Stitch > Thread Color Management > Apply Threadlist"
+msgstr ""
+
 #: lib/extensions/install_custom_palette.py:24
 #: lib/extensions/palette_to_text.py:26
 msgid "File does not exist."
@@ -1693,7 +1713,8 @@ msgstr "Ink/Stitch Belettering"
 msgid "Font"
 msgstr ""
 
-#: lib/extensions/lettering.py:66 inx/inkstitch_palette_to_text.inx:15
+#: lib/extensions/lettering.py:66 inx/inkstitch_apply_threadlist.inx:7
+#: inx/inkstitch_palette_to_text.inx:15
 msgid "Options"
 msgstr "Opties"
 
@@ -1971,7 +1992,7 @@ msgstr "Voorkeuze \"%s\" bestaat reeds. Gebruik een andere naam of kies \"Oversc
 #. #-#-#-#-#  messages-babel.po (PROJECT VERSION)  #-#-#-#-#
 #. command label at bottom of simulator window
 #: lib/gui/simulator.py:18 electron/src/renderer/assets/js/simulator.js:142
-#: inx/inkstitch_output_TXT.inx:29
+#: inx/inkstitch_output_GCODE.inx:29
 msgid "STITCH"
 msgstr "STEEK"
 
@@ -1984,12 +2005,12 @@ msgid "TRIM"
 msgstr "AFKNIPPEN"
 
 #: lib/gui/simulator.py:18 electron/src/renderer/assets/js/simulator.js:151
-#: inx/inkstitch_output_TXT.inx:33
+#: inx/inkstitch_output_GCODE.inx:33
 msgid "STOP"
 msgstr "STOP"
 
 #: lib/gui/simulator.py:18 electron/src/renderer/assets/js/simulator.js:154
-#: inx/inkstitch_output_TXT.inx:31
+#: inx/inkstitch_output_GCODE.inx:31
 msgid "COLOR CHANGE"
 msgstr "KLEUR WISSEL"
 
@@ -2075,7 +2096,7 @@ msgstr ""
 
 #. low-level file error.  %(error)s is (hopefully?) translated by
 #. the user's system automatically.
-#: lib/output.py:101
+#: lib/output.py:105
 #, python-format
 msgid "Error writing to %(path)s: %(error)s"
 msgstr "Fout bij schrijven naar %(path)s: %(error)s"
@@ -2536,15 +2557,15 @@ msgstr "Realistisch"
 #. description for pyembroidery file format: phb
 #. description for pyembroidery file format: phc
 #: pyembroidery-format-descriptions.py:2 pyembroidery-format-descriptions.py:4
-#: pyembroidery-format-descriptions.py:56
 #: pyembroidery-format-descriptions.py:58
+#: pyembroidery-format-descriptions.py:60
 msgid "Brother Embroidery Format"
 msgstr "Brother Borduurformaat"
 
 #. description for pyembroidery file format: exp
 #: pyembroidery-format-descriptions.py:6
-msgid "Melco Embroidery Format"
-msgstr "Melco Borduurformaat"
+msgid "Melco Expanded Embroidery Format"
+msgstr ""
 
 #. description for pyembroidery file format: dst
 #. description for pyembroidery file format: tbf
@@ -2557,12 +2578,13 @@ msgstr "Tajima Borduurformaat"
 #. description for pyembroidery file format: jpx
 #: pyembroidery-format-descriptions.py:10
 #: pyembroidery-format-descriptions.py:20
-#: pyembroidery-format-descriptions.py:74
+#: pyembroidery-format-descriptions.py:76
 msgid "Janome Embroidery Format"
 msgstr "Janome Borduurformaat"
 
 #. description for pyembroidery file format: vp3
 #. description for pyembroidery file format: ksm
+#. description for pyembroidery file format: spx
 #. description for pyembroidery file format: max
 #. description for pyembroidery file format: pcd
 #. description for pyembroidery file format: pcq
@@ -2570,11 +2592,12 @@ msgstr "Janome Borduurformaat"
 #. description for pyembroidery file format: pcs
 #: pyembroidery-format-descriptions.py:12
 #: pyembroidery-format-descriptions.py:50
-#: pyembroidery-format-descriptions.py:62
-#: pyembroidery-format-descriptions.py:66
+#: pyembroidery-format-descriptions.py:54
+#: pyembroidery-format-descriptions.py:64
 #: pyembroidery-format-descriptions.py:68
 #: pyembroidery-format-descriptions.py:70
 #: pyembroidery-format-descriptions.py:72
+#: pyembroidery-format-descriptions.py:74
 msgid "Pfaff Embroidery Format"
 msgstr "Pfaf Borduurformaat"
 
@@ -2661,39 +2684,74 @@ msgid "Happy Embroidery Format"
 msgstr "Happy Borduurformaat"
 
 #. description for pyembroidery file format: stx
-#: pyembroidery-format-descriptions.py:54
+#: pyembroidery-format-descriptions.py:56
 msgid "Data Stitch Embroidery Format"
 msgstr "Data Stitch Borduurformaat"
 
 #. description for pyembroidery file format: new
-#: pyembroidery-format-descriptions.py:60
+#: pyembroidery-format-descriptions.py:62
 msgid "Ameco Embroidery Format"
 msgstr "Ameco Borduurformaat"
 
 #. description for pyembroidery file format: mit
-#: pyembroidery-format-descriptions.py:64
+#: pyembroidery-format-descriptions.py:66
 msgid "Mitsubishi Embroidery Format"
 msgstr "Mitsubishi Borduurformaat"
 
 #. description for pyembroidery file format: stc
-#: pyembroidery-format-descriptions.py:76
+#: pyembroidery-format-descriptions.py:78
 msgid "Gunold Embroidery Format"
 msgstr "Gunold Borduurformaat"
 
+#. description for pyembroidery file format: zhs
+#: pyembroidery-format-descriptions.py:80
+msgid "Zeng Hsing Embroidery Format"
+msgstr ""
+
 #. description for pyembroidery file format: zxy
-#: pyembroidery-format-descriptions.py:78
+#: pyembroidery-format-descriptions.py:82
 msgid "ZSK TC Embroidery Format"
 msgstr "ZAK TC Borduurformaat"
 
 #. description for pyembroidery file format: pmv
-#: pyembroidery-format-descriptions.py:80
+#: pyembroidery-format-descriptions.py:84
 msgid "Brother Stitch Format"
 msgstr "Brother Stitch Formaat"
 
-#. description for pyembroidery file format: txt
-#: pyembroidery-format-descriptions.py:82
-msgid "G-code Format"
-msgstr "G-code Formaat"
+#. description for pyembroidery file format: png
+#: pyembroidery-format-descriptions.py:86
+msgid "PNG Format, Portable Network Graphics"
+msgstr ""
+
+#. description for pyembroidery file format: gcode
+#: pyembroidery-format-descriptions.py:88
+msgid "gcode Format, Text File"
+msgstr ""
+
+#. description for pyembroidery file format: hus
+#: pyembroidery-format-descriptions.py:90
+msgid "Husqvarna Embroidery Format"
+msgstr ""
+
+#. description for pyembroidery file format: edr
+#: pyembroidery-format-descriptions.py:92
+msgid "Edr Color Format"
+msgstr ""
+
+#. description for pyembroidery file format: col
+#: pyembroidery-format-descriptions.py:94
+msgid "Col Color Format"
+msgstr ""
+
+#. description for pyembroidery file format: inf
+#: pyembroidery-format-descriptions.py:96
+msgid "Inf Color Format"
+msgstr ""
+
+#. description for pyembroidery file format: json
+#: pyembroidery-format-descriptions.py:98
+msgid "Json Export"
+msgstr ""
 
 #. name for left arrow keyboard key
 #: electron/src/renderer/components/Simulator.vue:52
@@ -2903,29 +2961,67 @@ msgstr ""
 msgid "Apply Threadlist"
 msgstr ""
 
-#: inx/inkstitch_apply_threadlist.inx:6
+#: inx/inkstitch_apply_threadlist.inx:8
 #: inx/inkstitch_install_custom_palette.inx:8
 #: inx/inkstitch_palette_to_text.inx:17
 msgid "Choose file"
 msgstr "Kies bestand"
 
-#: inx/inkstitch_apply_threadlist.inx:7
+#: inx/inkstitch_apply_threadlist.inx:9
 msgid "Choose method"
 msgstr ""
 
-#: inx/inkstitch_apply_threadlist.inx:8
+#: inx/inkstitch_apply_threadlist.inx:10
 msgid "Apply Ink/Stitch threadlist"
 msgstr ""
 
-#: inx/inkstitch_apply_threadlist.inx:9
+#: inx/inkstitch_apply_threadlist.inx:11
 msgid "Apply other threadlist*"
 msgstr ""
 
-#: inx/inkstitch_apply_threadlist.inx:11
+#: inx/inkstitch_apply_threadlist.inx:13
 msgid "*Choose color palette"
 msgstr ""
 
-#: inx/inkstitch_apply_threadlist.inx:88 inx/inkstitch_generate_palette.inx:10
+#: inx/inkstitch_apply_threadlist.inx:87 inx/inkstitch_auto_run.inx:23
+#: inx/inkstitch_cutwork_segmentation.inx:42
+#: inx/inkstitch_generate_palette.inx:24 inx/inkstitch_palette_to_text.inx:19
+msgid "Help"
+msgstr ""
+
+#: inx/inkstitch_apply_threadlist.inx:88
+msgid "This extension applies colors from a color file to the objects in this document."
+msgstr ""
+
+#: inx/inkstitch_apply_threadlist.inx:89
+msgid "COL, INF, EDR"
+msgstr ""
+
+#: inx/inkstitch_apply_threadlist.inx:90
+msgid "Select the file and apply. The chosen method is not important for these file types."
+msgstr ""
+
+#: inx/inkstitch_apply_threadlist.inx:92
+msgid "TXT"
+msgstr ""
+
+#: inx/inkstitch_apply_threadlist.inx:93
+msgid "Import an Ink/Stitch threadlist file (created through the zip export option)."
+msgstr ""
+
+#: inx/inkstitch_apply_threadlist.inx:95
+msgid "Import any other Threadlist file in txt format. Ink/Stitch will try to match the colors to the selected thread palette. The objects in this document will be colored accordingly if color matching has been successful."
+msgstr ""
+
+#: inx/inkstitch_apply_threadlist.inx:98
+msgid "Get more information on our website"
+msgstr ""
+
+#: inx/inkstitch_apply_threadlist.inx:99
+msgid "https://inkstitch.org/docs/thread-color/#apply-threadlist"
+msgstr ""
+
+#: inx/inkstitch_apply_threadlist.inx:106 inx/inkstitch_generate_palette.inx:10
 #: inx/inkstitch_install.inx:10 inx/inkstitch_install_custom_palette.inx:13
 #: inx/inkstitch_palette_split_text.inx:10 inx/inkstitch_palette_to_text.inx:9
 msgid "Thread Color Management"
@@ -2955,11 +3051,6 @@ msgstr ""
 msgid "Trim jump stitches"
 msgstr ""
 
-#: inx/inkstitch_auto_run.inx:23 inx/inkstitch_cutwork_segmentation.inx:42
-#: inx/inkstitch_generate_palette.inx:24 inx/inkstitch_palette_to_text.inx:19
-msgid "Help"
-msgstr ""
-
 #: inx/inkstitch_auto_run.inx:25
 msgid "Add nodes at intersections:"
 msgstr ""
@@ -3325,6 +3416,18 @@ msgstr ""
 msgid "convert BRO file to Ink/Stitch manual-stitch paths"
 msgstr ""
 
+#: inx/inkstitch_input_COL.inx:3
+msgid "COL file input"
+msgstr ""
+
+#: inx/inkstitch_input_COL.inx:8
+msgid "Ink/Stitch: Col Color Format (.col)"
+msgstr ""
+
+#: inx/inkstitch_input_COL.inx:9
+msgid "convert COL file to Ink/Stitch manual-stitch paths"
+msgstr ""
+
 #: inx/inkstitch_input_DAT.inx:3
 msgid "DAT file input"
 msgstr ""
@@ -3373,6 +3476,18 @@ msgstr ""
 msgid "convert DSZ file to Ink/Stitch manual-stitch paths"
 msgstr ""
 
+#: inx/inkstitch_input_EDR.inx:3
+msgid "EDR file input"
+msgstr ""
+
+#: inx/inkstitch_input_EDR.inx:8
+msgid "Ink/Stitch: Edr Color Format (.edr)"
+msgstr ""
+
+#: inx/inkstitch_input_EDR.inx:9
+msgid "convert EDR file to Ink/Stitch manual-stitch paths"
+msgstr ""
+
 #: inx/inkstitch_input_EMD.inx:3
 msgid "EMD file input"
 msgstr ""
@@ -3390,7 +3505,7 @@ msgid "EXP file input"
 msgstr ""
 
 #: inx/inkstitch_input_EXP.inx:8 inx/inkstitch_output_EXP.inx:8
-msgid "Ink/Stitch: Melco Embroidery Format (.exp)"
+msgid "Ink/Stitch: Melco Expanded Embroidery Format (.exp)"
 msgstr ""
 
 #: inx/inkstitch_input_EXP.inx:9
@@ -3421,6 +3536,18 @@ msgstr ""
 msgid "convert FXY file to Ink/Stitch manual-stitch paths"
 msgstr ""
 
+#: inx/inkstitch_input_GCODE.inx:3
+msgid "GCODE file input"
+msgstr ""
+
+#: inx/inkstitch_input_GCODE.inx:8 inx/inkstitch_output_GCODE.inx:8
+msgid "Ink/Stitch: gcode Format, Text File (.gcode)"
+msgstr ""
+
+#: inx/inkstitch_input_GCODE.inx:9
+msgid "convert GCODE file to Ink/Stitch manual-stitch paths"
+msgstr ""
+
 #: inx/inkstitch_input_GT.inx:3
 msgid "GT file input"
 msgstr ""
@@ -3433,6 +3560,18 @@ msgstr ""
 msgid "convert GT file to Ink/Stitch manual-stitch paths"
 msgstr ""
 
+#: inx/inkstitch_input_HUS.inx:3
+msgid "HUS file input"
+msgstr ""
+
+#: inx/inkstitch_input_HUS.inx:8
+msgid "Ink/Stitch: Husqvarna Embroidery Format (.hus)"
+msgstr ""
+
+#: inx/inkstitch_input_HUS.inx:9
+msgid "convert HUS file to Ink/Stitch manual-stitch paths"
+msgstr ""
+
 #: inx/inkstitch_input_INB.inx:3
 msgid "INB file input"
 msgstr ""
@@ -3445,6 +3584,18 @@ msgstr ""
 msgid "convert INB file to Ink/Stitch manual-stitch paths"
 msgstr ""
 
+#: inx/inkstitch_input_INF.inx:3
+msgid "INF file input"
+msgstr ""
+
+#: inx/inkstitch_input_INF.inx:8
+msgid "Ink/Stitch: Inf Color Format (.inf)"
+msgstr ""
+
+#: inx/inkstitch_input_INF.inx:9
+msgid "convert INF file to Ink/Stitch manual-stitch paths"
+msgstr ""
+
 #: inx/inkstitch_input_JEF.inx:3
 msgid "JEF file input"
 msgstr ""
@@ -3613,6 +3764,18 @@ msgstr ""
 msgid "convert PHC file to Ink/Stitch manual-stitch paths"
 msgstr ""
 
+#: inx/inkstitch_input_PMV.inx:3
+msgid "PMV file input"
+msgstr ""
+
+#: inx/inkstitch_input_PMV.inx:8
+msgid "Ink/Stitch: Brother Stitch Format (.pmv)"
+msgstr ""
+
+#: inx/inkstitch_input_PMV.inx:9
+msgid "convert PMV file to Ink/Stitch manual-stitch paths"
+msgstr ""
+
 #: inx/inkstitch_input_SEW.inx:3
 msgid "SEW file input"
 msgstr ""
@@ -3637,6 +3800,18 @@ msgstr ""
 msgid "convert SHV file to Ink/Stitch manual-stitch paths"
 msgstr ""
 
+#: inx/inkstitch_input_SPX.inx:3
+msgid "SPX file input"
+msgstr ""
+
+#: inx/inkstitch_input_SPX.inx:8
+msgid "Ink/Stitch: Pfaff Embroidery Format (.spx)"
+msgstr ""
+
+#: inx/inkstitch_input_SPX.inx:9
+msgid "convert SPX file to Ink/Stitch manual-stitch paths"
+msgstr ""
+
 #: inx/inkstitch_input_STC.inx:3
 msgid "STC file input"
 msgstr ""
@@ -3713,7 +3888,7 @@ msgstr ""
 msgid "XXX file input"
 msgstr ""
 
-#: inx/inkstitch_input_XXX.inx:8
+#: inx/inkstitch_input_XXX.inx:8 inx/inkstitch_output_XXX.inx:8
 msgid "Ink/Stitch: Singer Embroidery Format (.xxx)"
 msgstr ""
 
@@ -3721,6 +3896,18 @@ msgstr ""
 msgid "convert XXX file to Ink/Stitch manual-stitch paths"
 msgstr ""
 
+#: inx/inkstitch_input_ZHS.inx:3
+msgid "ZHS file input"
+msgstr ""
+
+#: inx/inkstitch_input_ZHS.inx:8
+msgid "Ink/Stitch: Zeng Hsing Embroidery Format (.zhs)"
+msgstr ""
+
+#: inx/inkstitch_input_ZHS.inx:9
+msgid "convert ZHS file to Ink/Stitch manual-stitch paths"
+msgstr ""
+
 #: inx/inkstitch_input_ZXY.inx:3
 msgid "ZXY file input"
 msgstr ""
@@ -3876,11 +4063,11 @@ msgstr ""
 msgid "File format"
 msgstr ""
 
-#: inx/inkstitch_letters_to_font.inx:47
+#: inx/inkstitch_letters_to_font.inx:59
 msgid "Font directory"
 msgstr ""
 
-#: inx/inkstitch_letters_to_font.inx:49
+#: inx/inkstitch_letters_to_font.inx:61
 msgid "Import commands"
 msgstr ""
 
@@ -3892,6 +4079,18 @@ msgstr "Koppel Commando's aan Geselecteerde Objecten"
 msgid "Display|Hide Object Commands"
 msgstr ""
 
+#: inx/inkstitch_output_COL.inx:3
+msgid "COL file output"
+msgstr ""
+
+#: inx/inkstitch_output_COL.inx:8
+msgid "Ink/Stitch: Col Color Format [COLOR] (.col)"
+msgstr ""
+
+#: inx/inkstitch_output_COL.inx:9
+msgid "Save design in COL format using Ink/Stitch"
+msgstr ""
+
 #: inx/inkstitch_output_CSV.inx:3
 msgid "CSV file output"
 msgstr ""
@@ -3912,190 +4111,234 @@ msgstr ""
 msgid "Save design in DST format using Ink/Stitch"
 msgstr ""
 
-#: inx/inkstitch_output_EXP.inx:3
-msgid "EXP file output"
+#: inx/inkstitch_output_EDR.inx:3
+msgid "EDR file output"
 msgstr ""
 
-#: inx/inkstitch_output_EXP.inx:9
-msgid "Save design in EXP format using Ink/Stitch"
-msgstr ""
-
-#: inx/inkstitch_output_JEF.inx:3
-msgid "JEF file output"
+#: inx/inkstitch_output_EDR.inx:8
+msgid "Ink/Stitch: Edr Color Format [COLOR] (.edr)"
 msgstr ""
 
-#: inx/inkstitch_output_JEF.inx:9
-msgid "Save design in JEF format using Ink/Stitch"
-msgstr ""
-
-#: inx/inkstitch_output_PEC.inx:3
-msgid "PEC file output"
-msgstr ""
-
-#: inx/inkstitch_output_PEC.inx:9
-msgid "Save design in PEC format using Ink/Stitch"
-msgstr ""
-
-#: inx/inkstitch_output_PES.inx:3
-msgid "PES file output"
-msgstr ""
-
-#: inx/inkstitch_output_PES.inx:9
-msgid "Save design in PES format using Ink/Stitch"
+#: inx/inkstitch_output_EDR.inx:9
+msgid "Save design in EDR format using Ink/Stitch"
 msgstr ""
 
-#: inx/inkstitch_output_PMV.inx:3
-msgid "PMV file output"
-msgstr ""
-
-#: inx/inkstitch_output_PMV.inx:8
-msgid "Ink/Stitch: Brother Stitch Format [DEBUG] (.pmv)"
-msgstr ""
-
-#: inx/inkstitch_output_PMV.inx:9
-msgid "Save design in PMV format using Ink/Stitch"
-msgstr ""
-
-#: inx/inkstitch_output_SVG.inx:3
-msgid "SVG file output"
-msgstr ""
-
-#: inx/inkstitch_output_SVG.inx:8
-msgid "Ink/Stitch: Scalable Vector Graphics [DEBUG] (.svg)"
-msgstr ""
-
-#: inx/inkstitch_output_SVG.inx:9
-msgid "Save design in SVG format using Ink/Stitch"
+#: inx/inkstitch_output_EXP.inx:3
+msgid "EXP file output"
 msgstr ""
 
-#: inx/inkstitch_output_TXT.inx:3
-msgid "TXT file output"
+#: inx/inkstitch_output_EXP.inx:9
+msgid "Save design in EXP format using Ink/Stitch"
 msgstr ""
 
-#: inx/inkstitch_output_TXT.inx:8
-msgid "Ink/Stitch: G-code Format (.txt)"
+#: inx/inkstitch_output_GCODE.inx:3
+msgid "GCODE file output"
 msgstr ""
 
-#: inx/inkstitch_output_TXT.inx:9
-msgid "Save design in TXT format using Ink/Stitch"
+#: inx/inkstitch_output_GCODE.inx:9
+msgid "Save design in GCODE format using Ink/Stitch"
 msgstr ""
 
-#: inx/inkstitch_output_TXT.inx:17
+#: inx/inkstitch_output_GCODE.inx:17
 msgid "Coordinate Settings"
 msgstr ""
 
-#: inx/inkstitch_output_TXT.inx:18
+#: inx/inkstitch_output_GCODE.inx:18
 msgid "negate X coordinate values"
 msgstr "X coördinaat waarden negatief maken"
 
-#: inx/inkstitch_output_TXT.inx:18
+#: inx/inkstitch_output_GCODE.inx:18
 msgid "Negate x coordinates"
 msgstr "X coördinaten negatief maken"
 
-#: inx/inkstitch_output_TXT.inx:19
+#: inx/inkstitch_output_GCODE.inx:19
 msgid "negate Y coordinate values"
 msgstr "Y coördinaten negatief maken"
 
-#: inx/inkstitch_output_TXT.inx:19
+#: inx/inkstitch_output_GCODE.inx:19
 msgid "Negate y coordinates"
 msgstr "Y coördinaten negatief maken"
 
-#: inx/inkstitch_output_TXT.inx:20
+#: inx/inkstitch_output_GCODE.inx:20
 msgid "Z coordinate value"
 msgstr "Z coördinaat waarde"
 
-#: inx/inkstitch_output_TXT.inx:20
+#: inx/inkstitch_output_GCODE.inx:20
 msgid "Either alternate Z value between 0 and 1 or travel custom value."
 msgstr "Alternatieve Z waarde tussen 0 en 1 OF aangepaste verplaatsing waarde."
 
-#: inx/inkstitch_output_TXT.inx:21
+#: inx/inkstitch_output_GCODE.inx:21
 msgid "alternate Z value"
 msgstr "alternatieve Z waarde"
 
-#: inx/inkstitch_output_TXT.inx:22 inx/inkstitch_output_TXT.inx:25
+#: inx/inkstitch_output_GCODE.inx:22 inx/inkstitch_output_GCODE.inx:25
 msgid "Z travel per stitch"
 msgstr "Z verplaatsing per steek"
 
-#: inx/inkstitch_output_TXT.inx:25
+#: inx/inkstitch_output_GCODE.inx:25
 msgid "increment z coordinate by this amount per stitch if \"Z travel per stitch\" is enabled"
 msgstr "verhoog z coördinaat met deze hoeveelheid per steek als \"Z verplaatsing per steek\" aan staat"
 
-#: inx/inkstitch_output_TXT.inx:27
+#: inx/inkstitch_output_GCODE.inx:27
 msgid "Custom Commands"
 msgstr ""
 
-#: inx/inkstitch_output_TXT.inx:29
+#: inx/inkstitch_output_GCODE.inx:29
 msgid "Use '%X' for x-coordinate. Use '%Y' for y-coordinate and '%Z' for z-coordinate."
 msgstr ""
 
-#: inx/inkstitch_output_TXT.inx:31 inx/inkstitch_output_TXT.inx:33
+#: inx/inkstitch_output_GCODE.inx:31 inx/inkstitch_output_GCODE.inx:33
 msgid "Leave empty to use default value. Use 'none' to remove."
 msgstr ""
 
-#: inx/inkstitch_output_TXT.inx:34
+#: inx/inkstitch_output_GCODE.inx:34
 msgid "START"
 msgstr "START"
 
-#: inx/inkstitch_output_TXT.inx:35
+#: inx/inkstitch_output_GCODE.inx:35
 msgid "END"
 msgstr "EINDE"
 
-#: inx/inkstitch_output_TXT.inx:37
+#: inx/inkstitch_output_GCODE.inx:37
 msgid "Laser Settings"
 msgstr ""
 
-#: inx/inkstitch_output_TXT.inx:39
+#: inx/inkstitch_output_GCODE.inx:39
 msgid "laser mode"
 msgstr "laser modus"
 
-#: inx/inkstitch_output_TXT.inx:39
+#: inx/inkstitch_output_GCODE.inx:39
 msgid "Laser mode (generate g-code for grbl laser mode)"
 msgstr "Laser modus (genereer g-code voor grbl laser modus)"
 
-#: inx/inkstitch_output_TXT.inx:42
+#: inx/inkstitch_output_GCODE.inx:42
 msgid "dynamic laser power"
 msgstr "dynamische laser energie"
 
-#: inx/inkstitch_output_TXT.inx:42
+#: inx/inkstitch_output_GCODE.inx:42
 msgid "Use Grbl's M4 dynamic laser power mode. Ensures consistent laser cutting power regardless of motor speed. Only for PWM-capable lasers."
 msgstr ""
 
-#: inx/inkstitch_output_TXT.inx:44
+#: inx/inkstitch_output_GCODE.inx:44
 msgid "laser warm-up time"
 msgstr "laser opwarmtijd"
 
-#: inx/inkstitch_output_TXT.inx:44
+#: inx/inkstitch_output_GCODE.inx:44
 msgid "When turning on the laser, wait this many seconds for laser to warm up (G4 command)"
 msgstr "Bij aanzetten van de laser, wacht zoveel seconden voor laser opwarming (G4 commando)"
 
-#: inx/inkstitch_output_TXT.inx:46
+#: inx/inkstitch_output_GCODE.inx:46
 msgid "spindle speed"
 msgstr "spindlesnelheid"
 
-#: inx/inkstitch_output_TXT.inx:46
+#: inx/inkstitch_output_GCODE.inx:46
 msgid "spindle speed (laser power for laser mode, set to -1 to omit)"
 msgstr "spindlesnelheid (laserenergie voor lasermodus, gebruik -1 om weg te laten)"
 
-#: inx/inkstitch_output_TXT.inx:48
+#: inx/inkstitch_output_GCODE.inx:48
 msgid "min spindle speed"
 msgstr "min spindle snelheid"
 
-#: inx/inkstitch_output_TXT.inx:48
+#: inx/inkstitch_output_GCODE.inx:48
 msgid "minimum spindle speed value (grbl $31 setting)"
 msgstr "minimum spindle snelheid waarde (grbl $31 instelling)"
 
-#: inx/inkstitch_output_TXT.inx:50
+#: inx/inkstitch_output_GCODE.inx:50
 msgid "max spindle speed"
 msgstr "max spindle snelheid"
 
-#: inx/inkstitch_output_TXT.inx:50
+#: inx/inkstitch_output_GCODE.inx:50
 msgid "minimum spindle speed value (grbl $30 setting)"
 msgstr "maximum spindle snelheid waarde (grbl $30 setting)"
 
-#: inx/inkstitch_output_TXT.inx:51
+#: inx/inkstitch_output_GCODE.inx:51
 msgid "feed rate (in mm/min, set to -1 to omit)"
 msgstr "voedingssnelheid (in mm/min, gebruik -1 om weg te laten)"
 
+#: inx/inkstitch_output_INF.inx:3
+msgid "INF file output"
+msgstr ""
+
+#: inx/inkstitch_output_INF.inx:8
+msgid "Ink/Stitch: Inf Color Format [COLOR] (.inf)"
+msgstr ""
+
+#: inx/inkstitch_output_INF.inx:9
+msgid "Save design in INF format using Ink/Stitch"
+msgstr ""
+
+#: inx/inkstitch_output_JEF.inx:3
+msgid "JEF file output"
+msgstr ""
+
+#: inx/inkstitch_output_JEF.inx:9
+msgid "Save design in JEF format using Ink/Stitch"
+msgstr ""
+
+#: inx/inkstitch_output_JSON.inx:3
+msgid "JSON file output"
+msgstr ""
+
+#: inx/inkstitch_output_JSON.inx:8
+msgid "Ink/Stitch: Json Export [DEBUG] (.json)"
+msgstr ""
+
+#: inx/inkstitch_output_JSON.inx:9
+msgid "Save design in JSON format using Ink/Stitch"
+msgstr ""
+
+#: inx/inkstitch_output_PEC.inx:3
+msgid "PEC file output"
+msgstr ""
+
+#: inx/inkstitch_output_PEC.inx:9
+msgid "Save design in PEC format using Ink/Stitch"
+msgstr ""
+
+#: inx/inkstitch_output_PES.inx:3
+msgid "PES file output"
+msgstr ""
+
+#: inx/inkstitch_output_PES.inx:9
+msgid "Save design in PES format using Ink/Stitch"
+msgstr ""
+
+#: inx/inkstitch_output_PMV.inx:3
+msgid "PMV file output"
+msgstr ""
+
+#: inx/inkstitch_output_PMV.inx:8
+msgid "Ink/Stitch: Brother Stitch Format [STITCH] (.pmv)"
+msgstr ""
+
+#: inx/inkstitch_output_PMV.inx:9
+msgid "Save design in PMV format using Ink/Stitch"
+msgstr ""
+
+#: inx/inkstitch_output_PNG.inx:3
+msgid "PNG file output"
+msgstr ""
+
+#: inx/inkstitch_output_PNG.inx:8
+msgid "Ink/Stitch: PNG Format, Portable Network Graphics [IMAGE] (.png)"
+msgstr ""
+
+#: inx/inkstitch_output_PNG.inx:9
+msgid "Save design in PNG format using Ink/Stitch"
+msgstr ""
+
+#: inx/inkstitch_output_SVG.inx:3
+msgid "SVG file output"
+msgstr ""
+
+#: inx/inkstitch_output_SVG.inx:8
+msgid "Ink/Stitch: Scalable Vector Graphics [DEBUG] (.svg)"
+msgstr ""
+
+#: inx/inkstitch_output_SVG.inx:9
+msgid "Save design in SVG format using Ink/Stitch"
+msgstr ""
+
 #: inx/inkstitch_output_U01.inx:3
 msgid "U01 file output"
 msgstr ""
@@ -4112,6 +4355,14 @@ msgstr ""
 msgid "Save design in VP3 format using Ink/Stitch"
 msgstr ""
 
+#: inx/inkstitch_output_XXX.inx:3
+msgid "XXX file output"
+msgstr ""
+
+#: inx/inkstitch_output_XXX.inx:9
+msgid "Save design in XXX format using Ink/Stitch"
+msgstr ""
+
 #: inx/inkstitch_palette_split_text.inx:3
 msgid "Split text"
 msgstr ""
@@ -4220,11 +4471,11 @@ msgstr "Ink/Stitch: ZIP exporteer meerdere formaten (.zip)"
 msgid "Create a ZIP with multiple embroidery file formats using Ink/Stitch"
 msgstr "Maak een ZIP met meerdere borduurbestandsformaten met behulp van Ink/Stitch"
 
-#: inx/inkstitch_zip.inx:20
-msgid ".SVG: Scalable Vector Graphic"
+#: inx/inkstitch_zip.inx:26
+msgid ".TXT: Threadlist [COLOR]"
 msgstr ""
 
-#: inx/inkstitch_zip.inx:21
-msgid ".TXT: Threadlist"
+#: inx/inkstitch_zip.inx:27
+msgid ".SVG: Scalable Vector Graphic"
 msgstr ""