new translations from Crowdin

1 files changed, 79 insertions, 79 deletions

diff --git a/translations/messages_ru_RU.po b/translations/messages_ru_RU.po
index fbb9d320..ad768e44 100644
--- a/translations/messages_ru_RU.po
+++ b/translations/messages_ru_RU.po
@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2023-04-14 01:14+0000\n"
-"PO-Revision-Date: 2023-04-14 01:16\n"
+"POT-Creation-Date: 2023-04-15 01:16+0000\n"
+"PO-Revision-Date: 2023-04-15 01:18\n"
 "Last-Translator: \n"
 "Language-Team: Russian\n"
 "MIME-Version: 1.0\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-04-14 01:14+0000\n"
+"POT-Creation-Date: 2023-04-15 01:16+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1624,298 +1624,298 @@ msgstr "* Не обязательно: Запустите Параметры и
 msgid "Manual stitch along path"
 msgstr "Ручная строчка вдоль линии"
 
-#: lib/elements/satin_column.py:29
+#: lib/elements/satin_column.py:30
 msgid "Too few subpaths"
 msgstr "Слишком мало линий"
 
-#: lib/elements/satin_column.py:30
+#: lib/elements/satin_column.py:31
 msgid "Satin column: Object has too few subpaths.  A satin column should have at least two subpaths (the rails)."
 msgstr "Сатиновая колонна: в объекте мало линий. В сатиновой колонне должно быть по крайней мере две линии(направляющие)."
 
-#: lib/elements/satin_column.py:32
+#: lib/elements/satin_column.py:33
 msgid "* Add another subpath (select two rails and do Path > Combine)"
 msgstr "* Добавьте еще одну линию (выделите две направляющие и выполните Контур > Объединить)"
 
-#: lib/elements/satin_column.py:33
+#: lib/elements/satin_column.py:34
 msgid "* Convert to running stitch or simple satin (Params extension)"
 msgstr "* Конвертируйте в строчку или зигзаг (через Параметры)"
 
-#: lib/elements/satin_column.py:38
+#: lib/elements/satin_column.py:39
 msgid "Not stitchable satin column"
 msgstr ""
 
-#: lib/elements/satin_column.py:39
+#: lib/elements/satin_column.py:40
 msgid "A satin column consists out of two rails and one or more rungs. This satin column may have a different setup."
 msgstr ""
 
-#: lib/elements/satin_column.py:41
+#: lib/elements/satin_column.py:42
 msgid "Make sure your satin column is not a combination of multiple satin columns."
 msgstr ""
 
-#: lib/elements/satin_column.py:42
+#: lib/elements/satin_column.py:43
 msgid "Go to our website and read how a satin column should look like https://inkstitch.org/docs/stitches/satin-column/"
 msgstr ""
 
-#: lib/elements/satin_column.py:46
+#: lib/elements/satin_column.py:47
 msgid "Each rung should intersect both rails once."
 msgstr "Каждая поперечина должна пересекать обе направляющих."
 
-#: lib/elements/satin_column.py:50
+#: lib/elements/satin_column.py:51
 msgid "Rungs intersects too many times"
 msgstr "Поперечины пересекаются слишком много раз"
 
-#: lib/elements/satin_column.py:51
+#: lib/elements/satin_column.py:52
 msgid "Satin column: A rung intersects a rail more than once."
 msgstr "Сатиновая колонна: Поперечина пересекает направляющую более одного раза."
 
-#: lib/elements/satin_column.py:55
+#: lib/elements/satin_column.py:56
 msgid "Rung doesn't intersect rails"
 msgstr "Поперечина не пересекает направляющие"
 
-#: lib/elements/satin_column.py:56
+#: lib/elements/satin_column.py:57
 msgid "Satin column: A rung doesn't intersect both rails."
 msgstr "Сатиновая колонна: Поперечина не пересекает обе направляющие."
 
-#: lib/elements/satin_column.py:60
+#: lib/elements/satin_column.py:61
 msgid "Unequal number of points"
 msgstr "Неравное количество точек"
 
-#: lib/elements/satin_column.py:61
+#: lib/elements/satin_column.py:62
 msgid "Satin column: There are no rungs and rails have an an unequal number of points."
 msgstr "Сатиновая колонна: Поперечин нет, но количество точек на направляющих не равно друг другу."
 
-#: lib/elements/satin_column.py:63
+#: lib/elements/satin_column.py:64
 msgid "The easiest way to solve this issue is to add one or more rungs. "
 msgstr "Проще всего добавить одну или несколько поперечин. "
 
-#: lib/elements/satin_column.py:64
+#: lib/elements/satin_column.py:65
 msgid "Rungs control the stitch direction in satin columns."
 msgstr "Поперечины управляют наклоном стежков в сатиновой колонне."
 
-#: lib/elements/satin_column.py:65
+#: lib/elements/satin_column.py:66
 msgid "* With the selected object press \"P\" to activate the pencil tool."
 msgstr "* Когда объект выбран нажмите клавишу P чтобы выбрать инструмент Карандаш."
 
-#: lib/elements/satin_column.py:66
+#: lib/elements/satin_column.py:67
 msgid "* Hold \"Shift\" while drawing the rung."
 msgstr "* Удерживая клавишу Shift нарисуйте поперечину."
 
-#: lib/elements/satin_column.py:71 lib/elements/satin_column.py:81
+#: lib/elements/satin_column.py:72 lib/elements/satin_column.py:82
 #: inx/inkstitch_select_elements.inx:25
 msgid "Satin Column"
 msgstr "Сатиновая Колонна"
 
-#: lib/elements/satin_column.py:77
+#: lib/elements/satin_column.py:78
 msgid "Custom satin column"
 msgstr "Сатиновая колонна"
 
-#: lib/elements/satin_column.py:82
+#: lib/elements/satin_column.py:83
 msgid "\"E\" Stitch"
 msgstr ""
 
-#: lib/elements/satin_column.py:86 lib/elements/stroke.py:72
+#: lib/elements/satin_column.py:87 lib/elements/stroke.py:72
 #: inx/inkstitch_break_apart.inx:17
 msgid "Method"
 msgstr "Метод"
 
-#: lib/elements/satin_column.py:96 lib/elements/satin_column.py:376
+#: lib/elements/satin_column.py:97 lib/elements/satin_column.py:377
 msgid "Maximum stitch length"
 msgstr "Максимальная длина стежка"
 
-#: lib/elements/satin_column.py:97
+#: lib/elements/satin_column.py:98
 msgid "Maximum stitch length for split stitches."
 msgstr "Максимальная длина стежка до его разделения."
 
-#: lib/elements/satin_column.py:106
+#: lib/elements/satin_column.py:107
 msgid "Random percentage of satin width decrease"
 msgstr ""
 
-#: lib/elements/satin_column.py:107
+#: lib/elements/satin_column.py:108
 msgid "shorten stitch across rails at most this percent. Two values separated by a space may be used for an aysmmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:116
+#: lib/elements/satin_column.py:117
 msgid "Random percentage of satin width increase"
 msgstr ""
 
-#: lib/elements/satin_column.py:117
+#: lib/elements/satin_column.py:118
 msgid "lengthen stitch across rails at most this percent. Two values separated by a space may be used for an aysmmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:126
+#: lib/elements/satin_column.py:127
 msgid "Random zig-zag spacing percentage"
 msgstr ""
 
-#: lib/elements/satin_column.py:127
+#: lib/elements/satin_column.py:128
 msgid "Amount of random jitter added to stitch length."
 msgstr ""
 
-#: lib/elements/satin_column.py:135
+#: lib/elements/satin_column.py:136
 msgid "Random phase for split stitches"
 msgstr ""
 
-#: lib/elements/satin_column.py:136
+#: lib/elements/satin_column.py:137
 msgid "Controls whether split stitches are centered or with a random phase (which may increase stitch count)."
 msgstr ""
 
-#: lib/elements/satin_column.py:143
+#: lib/elements/satin_column.py:144
 msgid "Minimum length for random-phase split."
 msgstr ""
 
-#: lib/elements/satin_column.py:144
+#: lib/elements/satin_column.py:145
 msgid "Defaults to maximum stitch length. Smaller values allow for a transition between single-stitch and split-stitch."
 msgstr ""
 
-#: lib/elements/satin_column.py:153
+#: lib/elements/satin_column.py:154
 msgid "Random jitter for split stitches"
 msgstr ""
 
-#: lib/elements/satin_column.py:154
+#: lib/elements/satin_column.py:155
 msgid "Randomizes split stitch length if random phase is enabled, stitch position if disabled."
 msgstr ""
 
-#: lib/elements/satin_column.py:161
+#: lib/elements/satin_column.py:162
 msgid "Short stitch inset"
 msgstr ""
 
-#: lib/elements/satin_column.py:162
+#: lib/elements/satin_column.py:163
 msgid "Stitches in areas with high density will be inset by this amount."
 msgstr ""
 
-#: lib/elements/satin_column.py:172
+#: lib/elements/satin_column.py:173
 msgid "Short stitch distance"
 msgstr ""
 
-#: lib/elements/satin_column.py:173
+#: lib/elements/satin_column.py:174
 msgid "Inset stitches if the distance between stitches is smaller than this."
 msgstr ""
 
-#: lib/elements/satin_column.py:187 lib/elements/stroke.py:148
+#: lib/elements/satin_column.py:188 lib/elements/stroke.py:148
 msgid "Zig-zag spacing (peak-to-peak)"
 msgstr "Плотность зигзага (расстояние между пиками)"
 
-#: lib/elements/satin_column.py:188
+#: lib/elements/satin_column.py:189
 msgid "Peak-to-peak distance between zig-zags. This is double the mm/stitch measurement used by most mechanical machines."
 msgstr ""
 
-#: lib/elements/satin_column.py:200
+#: lib/elements/satin_column.py:201
 msgid "Pull compensation percentage"
 msgstr ""
 
-#: lib/elements/satin_column.py:201
+#: lib/elements/satin_column.py:202
 msgid "Additional pull compensation which varies as a percentage of stitch width. Two values separated by a space may be used for an aysmmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:215
+#: lib/elements/satin_column.py:216
 msgid "Pull compensation"
 msgstr "Компенсация стягивания"
 
-#: lib/elements/satin_column.py:216
+#: lib/elements/satin_column.py:217
 msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This setting expands each pair of needle penetrations outward from the center of the satin column by a fixed length. Two values separated by a space may be used for an aysmmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:233
+#: lib/elements/satin_column.py:234
 msgid "Reverse one rail"
 msgstr ""
 
-#: lib/elements/satin_column.py:234
+#: lib/elements/satin_column.py:235
 msgid "Enabling this may help if your satin renders very strangely."
 msgstr ""
 
-#: lib/elements/satin_column.py:244
+#: lib/elements/satin_column.py:245
 msgid "Swap rails"
 msgstr ""
 
-#: lib/elements/satin_column.py:245
+#: lib/elements/satin_column.py:246
 msgid "Swaps the first and second rails of the satin column, affecting which side the thread finished on as well as any sided properties"
 msgstr ""
 
-#: lib/elements/satin_column.py:254
+#: lib/elements/satin_column.py:255
 msgid "Contour underlay"
 msgstr "Предварительная прострочка контура"
 
-#: lib/elements/satin_column.py:254 lib/elements/satin_column.py:261
-#: lib/elements/satin_column.py:269 lib/elements/satin_column.py:284
+#: lib/elements/satin_column.py:255 lib/elements/satin_column.py:262
+#: lib/elements/satin_column.py:270 lib/elements/satin_column.py:285
 msgid "Contour Underlay"
 msgstr "Прострочка Контура"
 
-#: lib/elements/satin_column.py:261 lib/elements/satin_column.py:300
+#: lib/elements/satin_column.py:262 lib/elements/satin_column.py:301
 msgid "Stitch length"
 msgstr "Длина стежка"
 
-#: lib/elements/satin_column.py:267
+#: lib/elements/satin_column.py:268
 msgid "Inset distance (fixed)"
 msgstr ""
 
-#: lib/elements/satin_column.py:268
+#: lib/elements/satin_column.py:269
 msgid "Shrink the outline by a fixed length, to prevent the underlay from showing around the outside of the satin column."
 msgstr ""
 
-#: lib/elements/satin_column.py:281
+#: lib/elements/satin_column.py:282
 msgid "Inset distance (proportional)"
 msgstr ""
 
-#: lib/elements/satin_column.py:282
+#: lib/elements/satin_column.py:283
 msgid "Shrink the outline by a proportion of the column width, to prevent the underlay from showing around the outside of the satin column."
 msgstr ""
 
-#: lib/elements/satin_column.py:293
+#: lib/elements/satin_column.py:294
 msgid "Center-walk underlay"
 msgstr "Предварительная прострочка по центру"
 
-#: lib/elements/satin_column.py:293 lib/elements/satin_column.py:300
-#: lib/elements/satin_column.py:309 lib/elements/satin_column.py:319
+#: lib/elements/satin_column.py:294 lib/elements/satin_column.py:301
+#: lib/elements/satin_column.py:310 lib/elements/satin_column.py:320
 msgid "Center-Walk Underlay"
 msgstr "Прострочка По Центру"
 
-#: lib/elements/satin_column.py:306 lib/elements/stroke.py:82
+#: lib/elements/satin_column.py:307 lib/elements/stroke.py:82
 msgid "Repeats"
 msgstr "Повторов строчки"
 
-#: lib/elements/satin_column.py:307
+#: lib/elements/satin_column.py:308
 msgid "For an odd number of repeats, this will reverse the direction the satin column is stitched, causing stitching to both begin and end at the start point."
 msgstr ""
 
-#: lib/elements/satin_column.py:317
+#: lib/elements/satin_column.py:318
 msgid "Position"
 msgstr ""
 
-#: lib/elements/satin_column.py:318
+#: lib/elements/satin_column.py:319
 #, python-format
 msgid "Position of underlay from between the rails. 0% is along the first rail, 50% is centered, 100% is along the second rail."
 msgstr ""
 
-#: lib/elements/satin_column.py:326
+#: lib/elements/satin_column.py:327
 msgid "Zig-zag underlay"
 msgstr "Предварительная прострочка зигзагом"
 
-#: lib/elements/satin_column.py:326 lib/elements/satin_column.py:335
-#: lib/elements/satin_column.py:346 lib/elements/satin_column.py:366
-#: lib/elements/satin_column.py:379
+#: lib/elements/satin_column.py:327 lib/elements/satin_column.py:336
+#: lib/elements/satin_column.py:347 lib/elements/satin_column.py:367
+#: lib/elements/satin_column.py:380
 msgid "Zig-zag Underlay"
 msgstr "Прострочка Зигзагом"
 
-#: lib/elements/satin_column.py:332
+#: lib/elements/satin_column.py:333
 msgid "Zig-Zag spacing (peak-to-peak)"
 msgstr "Плотность зигзага"
 
-#: lib/elements/satin_column.py:333
+#: lib/elements/satin_column.py:334
 msgid "Distance between peaks of the zig-zags."
 msgstr "Расстояние между пиками зигзага."
 
-#: lib/elements/satin_column.py:343
+#: lib/elements/satin_column.py:344
 msgid "Inset amount (fixed)"
 msgstr ""
 
-#: lib/elements/satin_column.py:344 lib/elements/satin_column.py:364
+#: lib/elements/satin_column.py:345 lib/elements/satin_column.py:365
 msgid "default: half of contour underlay inset"
 msgstr "по умолчанию: половина отступа прострочки контура"
 
-#: lib/elements/satin_column.py:363
+#: lib/elements/satin_column.py:364
 msgid "Inset amount (proportional)"
 msgstr ""
 
-#: lib/elements/satin_column.py:377
+#: lib/elements/satin_column.py:378
 msgid "Split stitch if distance of maximum stitch length is exceeded"
 msgstr "Разделять стежки, если их длина превосходит указанную"