new translations from Crowdin

1 files changed, 92 insertions, 92 deletions

diff --git a/translations/messages_ru_RU.po b/translations/messages_ru_RU.po
index f717370e..d505c4c7 100644
--- a/translations/messages_ru_RU.po
+++ b/translations/messages_ru_RU.po
@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2023-04-17 01:16+0000\n"
-"PO-Revision-Date: 2023-04-20 01:14\n"
+"POT-Creation-Date: 2023-04-21 01:13+0000\n"
+"PO-Revision-Date: 2023-04-21 01:15\n"
 "Last-Translator: \n"
 "Language-Team: Russian\n"
 "MIME-Version: 1.0\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-04-17 01:16+0000\n"
+"POT-Creation-Date: 2023-04-21 01:13+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1624,298 +1624,298 @@ msgstr "* Не обязательно: Запустите Параметры и
 msgid "Manual stitch along path"
 msgstr "Ручная строчка вдоль линии"
 
-#: lib/elements/satin_column.py:30
+#: lib/elements/satin_column.py:31
 msgid "Too few subpaths"
 msgstr "Слишком мало линий"
 
-#: lib/elements/satin_column.py:31
+#: lib/elements/satin_column.py:32
 msgid "Satin column: Object has too few subpaths.  A satin column should have at least two subpaths (the rails)."
 msgstr "Сатиновая колонна: в объекте мало линий. В сатиновой колонне должно быть по крайней мере две линии(направляющие)."
 
-#: lib/elements/satin_column.py:33
+#: lib/elements/satin_column.py:34
 msgid "* Add another subpath (select two rails and do Path > Combine)"
 msgstr "* Добавьте еще одну линию (выделите две направляющие и выполните Контур > Объединить)"
 
-#: lib/elements/satin_column.py:34
+#: lib/elements/satin_column.py:35
 msgid "* Convert to running stitch or simple satin (Params extension)"
 msgstr "* Конвертируйте в строчку или зигзаг (через Параметры)"
 
-#: lib/elements/satin_column.py:39
+#: lib/elements/satin_column.py:40
 msgid "Not stitchable satin column"
 msgstr ""
 
-#: lib/elements/satin_column.py:40
+#: lib/elements/satin_column.py:41
 msgid "A satin column consists out of two rails and one or more rungs. This satin column may have a different setup."
 msgstr ""
 
-#: lib/elements/satin_column.py:42
+#: lib/elements/satin_column.py:43
 msgid "Make sure your satin column is not a combination of multiple satin columns."
 msgstr ""
 
-#: lib/elements/satin_column.py:43
+#: lib/elements/satin_column.py:44
 msgid "Go to our website and read how a satin column should look like https://inkstitch.org/docs/stitches/satin-column/"
 msgstr ""
 
-#: lib/elements/satin_column.py:47
+#: lib/elements/satin_column.py:48
 msgid "Each rung should intersect both rails once."
 msgstr "Каждая поперечина должна пересекать обе направляющих."
 
-#: lib/elements/satin_column.py:51
+#: lib/elements/satin_column.py:52
 msgid "Rungs intersects too many times"
 msgstr "Поперечины пересекаются слишком много раз"
 
-#: lib/elements/satin_column.py:52
+#: lib/elements/satin_column.py:53
 msgid "Satin column: A rung intersects a rail more than once."
 msgstr "Сатиновая колонна: Поперечина пересекает направляющую более одного раза."
 
-#: lib/elements/satin_column.py:56
+#: lib/elements/satin_column.py:57
 msgid "Rung doesn't intersect rails"
 msgstr "Поперечина не пересекает направляющие"
 
-#: lib/elements/satin_column.py:57
+#: lib/elements/satin_column.py:58
 msgid "Satin column: A rung doesn't intersect both rails."
 msgstr "Сатиновая колонна: Поперечина не пересекает обе направляющие."
 
-#: lib/elements/satin_column.py:61
+#: lib/elements/satin_column.py:62
 msgid "Unequal number of points"
 msgstr "Неравное количество точек"
 
-#: lib/elements/satin_column.py:62
+#: lib/elements/satin_column.py:63
 msgid "Satin column: There are no rungs and rails have an an unequal number of points."
 msgstr "Сатиновая колонна: Поперечин нет, но количество точек на направляющих не равно друг другу."
 
-#: lib/elements/satin_column.py:64
+#: lib/elements/satin_column.py:65
 msgid "The easiest way to solve this issue is to add one or more rungs. "
 msgstr "Проще всего добавить одну или несколько поперечин. "
 
-#: lib/elements/satin_column.py:65
+#: lib/elements/satin_column.py:66
 msgid "Rungs control the stitch direction in satin columns."
 msgstr "Поперечины управляют наклоном стежков в сатиновой колонне."
 
-#: lib/elements/satin_column.py:66
+#: lib/elements/satin_column.py:67
 msgid "* With the selected object press \"P\" to activate the pencil tool."
 msgstr "* Когда объект выбран нажмите клавишу P чтобы выбрать инструмент Карандаш."
 
-#: lib/elements/satin_column.py:67
+#: lib/elements/satin_column.py:68
 msgid "* Hold \"Shift\" while drawing the rung."
 msgstr "* Удерживая клавишу Shift нарисуйте поперечину."
 
-#: lib/elements/satin_column.py:72 lib/elements/satin_column.py:82
+#: lib/elements/satin_column.py:73 lib/elements/satin_column.py:83
 #: inx/inkstitch_select_elements.inx:25
 msgid "Satin Column"
 msgstr "Сатиновая Колонна"
 
-#: lib/elements/satin_column.py:78
+#: lib/elements/satin_column.py:79
 msgid "Custom satin column"
 msgstr "Сатиновая колонна"
 
-#: lib/elements/satin_column.py:83
+#: lib/elements/satin_column.py:84
 msgid "\"E\" Stitch"
 msgstr ""
 
-#: lib/elements/satin_column.py:87 lib/elements/stroke.py:72
+#: lib/elements/satin_column.py:88 lib/elements/stroke.py:72
 #: inx/inkstitch_break_apart.inx:17
 msgid "Method"
 msgstr "Метод"
 
-#: lib/elements/satin_column.py:97 lib/elements/satin_column.py:377
+#: lib/elements/satin_column.py:98 lib/elements/satin_column.py:378
 msgid "Maximum stitch length"
 msgstr "Максимальная длина стежка"
 
-#: lib/elements/satin_column.py:98
+#: lib/elements/satin_column.py:99
 msgid "Maximum stitch length for split stitches."
 msgstr "Максимальная длина стежка до его разделения."
 
-#: lib/elements/satin_column.py:107
+#: lib/elements/satin_column.py:108
 msgid "Random percentage of satin width decrease"
 msgstr ""
 
-#: lib/elements/satin_column.py:108
+#: lib/elements/satin_column.py:109
 msgid "shorten stitch across rails at most this percent. Two values separated by a space may be used for an aysmmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:117
+#: lib/elements/satin_column.py:118
 msgid "Random percentage of satin width increase"
 msgstr ""
 
-#: lib/elements/satin_column.py:118
+#: lib/elements/satin_column.py:119
 msgid "lengthen stitch across rails at most this percent. Two values separated by a space may be used for an aysmmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:127
+#: lib/elements/satin_column.py:128
 msgid "Random zig-zag spacing percentage"
 msgstr ""
 
-#: lib/elements/satin_column.py:128
+#: lib/elements/satin_column.py:129
 msgid "Amount of random jitter added to stitch length."
 msgstr ""
 
-#: lib/elements/satin_column.py:136
+#: lib/elements/satin_column.py:137
 msgid "Random phase for split stitches"
 msgstr ""
 
-#: lib/elements/satin_column.py:137
+#: lib/elements/satin_column.py:138
 msgid "Controls whether split stitches are centered or with a random phase (which may increase stitch count)."
 msgstr ""
 
-#: lib/elements/satin_column.py:144
+#: lib/elements/satin_column.py:145
 msgid "Minimum length for random-phase split."
 msgstr ""
 
-#: lib/elements/satin_column.py:145
+#: lib/elements/satin_column.py:146
 msgid "Defaults to maximum stitch length. Smaller values allow for a transition between single-stitch and split-stitch."
 msgstr ""
 
-#: lib/elements/satin_column.py:154
+#: lib/elements/satin_column.py:155
 msgid "Random jitter for split stitches"
 msgstr ""
 
-#: lib/elements/satin_column.py:155
+#: lib/elements/satin_column.py:156
 msgid "Randomizes split stitch length if random phase is enabled, stitch position if disabled."
 msgstr ""
 
-#: lib/elements/satin_column.py:162
+#: lib/elements/satin_column.py:163
 msgid "Short stitch inset"
 msgstr ""
 
-#: lib/elements/satin_column.py:163
+#: lib/elements/satin_column.py:164
 msgid "Stitches in areas with high density will be inset by this amount."
 msgstr ""
 
-#: lib/elements/satin_column.py:173
+#: lib/elements/satin_column.py:174
 msgid "Short stitch distance"
 msgstr ""
 
-#: lib/elements/satin_column.py:174
+#: lib/elements/satin_column.py:175
 msgid "Inset stitches if the distance between stitches is smaller than this."
 msgstr ""
 
-#: lib/elements/satin_column.py:188 lib/elements/stroke.py:148
+#: lib/elements/satin_column.py:189 lib/elements/stroke.py:148
 msgid "Zig-zag spacing (peak-to-peak)"
 msgstr "Плотность зигзага (расстояние между пиками)"
 
-#: lib/elements/satin_column.py:189
+#: lib/elements/satin_column.py:190
 msgid "Peak-to-peak distance between zig-zags. This is double the mm/stitch measurement used by most mechanical machines."
 msgstr ""
 
-#: lib/elements/satin_column.py:201
+#: lib/elements/satin_column.py:202
 msgid "Pull compensation percentage"
 msgstr ""
 
-#: lib/elements/satin_column.py:202
+#: lib/elements/satin_column.py:203
 msgid "Additional pull compensation which varies as a percentage of stitch width. Two values separated by a space may be used for an aysmmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:216
+#: lib/elements/satin_column.py:217
 msgid "Pull compensation"
 msgstr "Компенсация стягивания"
 
-#: lib/elements/satin_column.py:217
+#: lib/elements/satin_column.py:218
 msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This setting expands each pair of needle penetrations outward from the center of the satin column by a fixed length. Two values separated by a space may be used for an aysmmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:234
+#: lib/elements/satin_column.py:235
 msgid "Reverse one rail"
 msgstr ""
 
-#: lib/elements/satin_column.py:235
+#: lib/elements/satin_column.py:236
 msgid "Enabling this may help if your satin renders very strangely."
 msgstr ""
 
-#: lib/elements/satin_column.py:245
+#: lib/elements/satin_column.py:246
 msgid "Swap rails"
 msgstr ""
 
-#: lib/elements/satin_column.py:246
+#: lib/elements/satin_column.py:247
 msgid "Swaps the first and second rails of the satin column, affecting which side the thread finished on as well as any sided properties"
 msgstr ""
 
-#: lib/elements/satin_column.py:255
+#: lib/elements/satin_column.py:256
 msgid "Contour underlay"
 msgstr "Предварительная прострочка контура"
 
-#: lib/elements/satin_column.py:255 lib/elements/satin_column.py:262
-#: lib/elements/satin_column.py:270 lib/elements/satin_column.py:285
+#: lib/elements/satin_column.py:256 lib/elements/satin_column.py:263
+#: lib/elements/satin_column.py:271 lib/elements/satin_column.py:286
 msgid "Contour Underlay"
 msgstr "Прострочка Контура"
 
-#: lib/elements/satin_column.py:262 lib/elements/satin_column.py:301
+#: lib/elements/satin_column.py:263 lib/elements/satin_column.py:302
 msgid "Stitch length"
 msgstr "Длина стежка"
 
-#: lib/elements/satin_column.py:268
+#: lib/elements/satin_column.py:269
 msgid "Inset distance (fixed)"
 msgstr ""
 
-#: lib/elements/satin_column.py:269
+#: lib/elements/satin_column.py:270
 msgid "Shrink the outline by a fixed length, to prevent the underlay from showing around the outside of the satin column."
 msgstr ""
 
-#: lib/elements/satin_column.py:282
+#: lib/elements/satin_column.py:283
 msgid "Inset distance (proportional)"
 msgstr ""
 
-#: lib/elements/satin_column.py:283
+#: lib/elements/satin_column.py:284
 msgid "Shrink the outline by a proportion of the column width, to prevent the underlay from showing around the outside of the satin column."
 msgstr ""
 
-#: lib/elements/satin_column.py:294
+#: lib/elements/satin_column.py:295
 msgid "Center-walk underlay"
 msgstr "Предварительная прострочка по центру"
 
-#: lib/elements/satin_column.py:294 lib/elements/satin_column.py:301
-#: lib/elements/satin_column.py:310 lib/elements/satin_column.py:320
+#: lib/elements/satin_column.py:295 lib/elements/satin_column.py:302
+#: lib/elements/satin_column.py:311 lib/elements/satin_column.py:321
 msgid "Center-Walk Underlay"
 msgstr "Прострочка По Центру"
 
-#: lib/elements/satin_column.py:307 lib/elements/stroke.py:82
+#: lib/elements/satin_column.py:308 lib/elements/stroke.py:82
 msgid "Repeats"
 msgstr "Повторов строчки"
 
-#: lib/elements/satin_column.py:308
+#: lib/elements/satin_column.py:309
 msgid "For an odd number of repeats, this will reverse the direction the satin column is stitched, causing stitching to both begin and end at the start point."
 msgstr ""
 
-#: lib/elements/satin_column.py:318
+#: lib/elements/satin_column.py:319
 msgid "Position"
 msgstr ""
 
-#: lib/elements/satin_column.py:319
+#: lib/elements/satin_column.py:320
 #, python-format
 msgid "Position of underlay from between the rails. 0% is along the first rail, 50% is centered, 100% is along the second rail."
 msgstr ""
 
-#: lib/elements/satin_column.py:327
+#: lib/elements/satin_column.py:328
 msgid "Zig-zag underlay"
 msgstr "Предварительная прострочка зигзагом"
 
-#: lib/elements/satin_column.py:327 lib/elements/satin_column.py:336
-#: lib/elements/satin_column.py:347 lib/elements/satin_column.py:367
-#: lib/elements/satin_column.py:380
+#: lib/elements/satin_column.py:328 lib/elements/satin_column.py:337
+#: lib/elements/satin_column.py:348 lib/elements/satin_column.py:368
+#: lib/elements/satin_column.py:381
 msgid "Zig-zag Underlay"
 msgstr "Прострочка Зигзагом"
 
-#: lib/elements/satin_column.py:333
+#: lib/elements/satin_column.py:334
 msgid "Zig-Zag spacing (peak-to-peak)"
 msgstr "Плотность зигзага"
 
-#: lib/elements/satin_column.py:334
+#: lib/elements/satin_column.py:335
 msgid "Distance between peaks of the zig-zags."
 msgstr "Расстояние между пиками зигзага."
 
-#: lib/elements/satin_column.py:344
+#: lib/elements/satin_column.py:345
 msgid "Inset amount (fixed)"
 msgstr ""
 
-#: lib/elements/satin_column.py:345 lib/elements/satin_column.py:365
+#: lib/elements/satin_column.py:346 lib/elements/satin_column.py:366
 msgid "default: half of contour underlay inset"
 msgstr "по умолчанию: половина отступа прострочки контура"
 
-#: lib/elements/satin_column.py:364
+#: lib/elements/satin_column.py:365
 msgid "Inset amount (proportional)"
 msgstr ""
 
-#: lib/elements/satin_column.py:378
+#: lib/elements/satin_column.py:379
 msgid "Split stitch if distance of maximum stitch length is exceeded"
 msgstr "Разделять стежки, если их длина превосходит указанную"
 
@@ -2781,46 +2781,46 @@ msgstr "Ошибка при записи в %(path)s: %(error)s"
 msgid "File does not exist and cannot be opened. Please correct the file path and try again.\\r%s"
 msgstr "Файл не существует и не может быть открыт. Проверьте правильность пути и попробуйте снова.\\r%s"
 
-#: lib/stitch_plan/lock_stitch.py:211
+#: lib/stitch_plan/lock_stitch.py:34 lib/stitch_plan/lock_stitch.py:212
+msgid "Custom"
+msgstr ""
+
+#: lib/stitch_plan/lock_stitch.py:203
 msgid "Half Stitch"
 msgstr ""
 
-#: lib/stitch_plan/lock_stitch.py:212
+#: lib/stitch_plan/lock_stitch.py:204
 msgid "Arrow"
 msgstr ""
 
-#: lib/stitch_plan/lock_stitch.py:213
+#: lib/stitch_plan/lock_stitch.py:205
 msgid "Back and forth"
 msgstr ""
 
-#: lib/stitch_plan/lock_stitch.py:214
+#: lib/stitch_plan/lock_stitch.py:206
 msgid "Bowtie"
 msgstr ""
 
-#: lib/stitch_plan/lock_stitch.py:215
+#: lib/stitch_plan/lock_stitch.py:207
 msgid "Cross"
 msgstr ""
 
-#: lib/stitch_plan/lock_stitch.py:216
+#: lib/stitch_plan/lock_stitch.py:208
 msgid "Star"
 msgstr ""
 
-#: lib/stitch_plan/lock_stitch.py:217 inx/inkstitch_break_apart.inx:18
+#: lib/stitch_plan/lock_stitch.py:209 inx/inkstitch_break_apart.inx:18
 msgid "Simple"
 msgstr "Простой"
 
-#: lib/stitch_plan/lock_stitch.py:218
+#: lib/stitch_plan/lock_stitch.py:210
 msgid "Triangle"
 msgstr ""
 
-#: lib/stitch_plan/lock_stitch.py:219
+#: lib/stitch_plan/lock_stitch.py:211
 msgid "Zig-zag"
 msgstr ""
 
-#: lib/stitch_plan/lock_stitch.py:220
-msgid "Custom"
-msgstr ""
-
 #: lib/stitch_plan/stitch_plan.py:26
 msgid "There is no selected stitchable element. Please run Extensions > Ink/Stitch > Troubleshoot > Troubleshoot objects in case you have expected a stitchout."
 msgstr ""