new translations from Crowdin

1 files changed, 169 insertions, 169 deletions

diff --git a/translations/messages_sv_SE.po b/translations/messages_sv_SE.po
index 4fd83f01..9f9eee16 100644
--- a/translations/messages_sv_SE.po
+++ b/translations/messages_sv_SE.po
@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2024-05-30 01:10+0000\n"
-"PO-Revision-Date: 2024-05-30 01:11\n"
+"POT-Creation-Date: 2024-06-04 01:11+0000\n"
+"PO-Revision-Date: 2024-06-04 01:12\n"
 "Last-Translator: \n"
 "Language-Team: Swedish\n"
 "MIME-Version: 1.0\n"
@@ -12,7 +12,7 @@ msgstr ""
 "Generated-By: Babel 2.15.0\n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-05-30 01:10+0000\n"
+"POT-Creation-Date: 2024-06-04 01:11+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1099,516 +1099,516 @@ msgstr ""
 msgid "* Run Extensions > Ink/Stitch > Troubleshoot > Cleanup Document..."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:36
+#: lib/elements/fill_stitch.py:37
 msgid "Small Fill"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:37
+#: lib/elements/fill_stitch.py:38
 msgid "This fill object is so small that it would probably look better as running stitch or satin column. For very small shapes, fill stitch is not possible, and Ink/Stitch will use running stitch around the outline instead."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:43 lib/elements/fill_stitch.py:262
+#: lib/elements/fill_stitch.py:44 lib/elements/fill_stitch.py:263
 msgid "Expand"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:44
+#: lib/elements/fill_stitch.py:45
 msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:49 lib/elements/fill_stitch.py:651
+#: lib/elements/fill_stitch.py:50 lib/elements/fill_stitch.py:652
 msgid "Inset"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:50
+#: lib/elements/fill_stitch.py:51
 msgid "The underlay inset parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use the original size instead."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:55
+#: lib/elements/fill_stitch.py:56
 msgid "Missing Guideline"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:56
+#: lib/elements/fill_stitch.py:57
 msgid "This object is set to \"Guided Fill\", but has no guide line."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:58
+#: lib/elements/fill_stitch.py:59
 msgid "* Create a stroke object"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:59
+#: lib/elements/fill_stitch.py:60
 msgid "* Select this object and run Extensions > Ink/Stitch > Edit > Selection to guide line"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:64
+#: lib/elements/fill_stitch.py:65
 msgid "Disjointed Guide Line"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:65
+#: lib/elements/fill_stitch.py:66
 msgid "The guide line of this object isn't within the object borders. The guide line works best, if it is within the target element."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:68
+#: lib/elements/fill_stitch.py:69
 msgid "* Move the guide line into the element"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:73 lib/elements/stroke.py:27
+#: lib/elements/fill_stitch.py:74 lib/elements/stroke.py:27
 msgid "Multiple Guide Lines"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:74 lib/elements/stroke.py:28
+#: lib/elements/fill_stitch.py:75 lib/elements/stroke.py:28
 msgid "This object has multiple guide lines, but only the first one will be used."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:76 lib/elements/stroke.py:30
+#: lib/elements/fill_stitch.py:77 lib/elements/stroke.py:30
 msgid "* Remove all guide lines, except for one."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:81
+#: lib/elements/fill_stitch.py:82
 msgid "Unconnected"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:82
+#: lib/elements/fill_stitch.py:83
 msgid "Fill: This object is made up of unconnected shapes. Ink/Stitch doesn't know what order to stitch them in.  Please break this object up into separate shapes."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:86 lib/elements/fill_stitch.py:95
-#: lib/elements/fill_stitch.py:140
+#: lib/elements/fill_stitch.py:87 lib/elements/fill_stitch.py:96
+#: lib/elements/fill_stitch.py:141
 msgid "* Extensions > Ink/Stitch > Fill Tools > Break Apart Fill Objects"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:91
+#: lib/elements/fill_stitch.py:92
 msgid "Border crosses itself"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:92
+#: lib/elements/fill_stitch.py:93
 msgid "Fill: The border crosses over itself. This may lead into unconnected shapes. Please break this object into separate shapes to indicate in which order it should be stitched in."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:100
+#: lib/elements/fill_stitch.py:101
 msgid "Fill and Stroke color"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:101
+#: lib/elements/fill_stitch.py:102
 msgid "Element has both a fill and a stroke color. It is recommended to use two separate elements instead."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:103
+#: lib/elements/fill_stitch.py:104
 msgid "* Duplicate the element. Remove stroke color from the first and fill color from the second."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:104
+#: lib/elements/fill_stitch.py:105
 msgid "* Adapt the shape of the second element to compensate for push and pull fabric distortion."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:109
+#: lib/elements/fill_stitch.py:110
 msgid "No linear gradient color"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:110
+#: lib/elements/fill_stitch.py:111
 msgid "Linear Gradient has no linear gradient color."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:112
+#: lib/elements/fill_stitch.py:113
 msgid "* Open the Fill and Stroke dialog."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:113
+#: lib/elements/fill_stitch.py:114
 msgid "* Set a linear gradient as a fill and adapt colors to your liking."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:118
+#: lib/elements/fill_stitch.py:119
 msgid "No stripes to render"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:119
+#: lib/elements/fill_stitch.py:120
 msgid "Tartan fill: There is no active fill stripe to render"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:121 lib/elements/fill_stitch.py:131
+#: lib/elements/fill_stitch.py:122 lib/elements/fill_stitch.py:132
 msgid "Go to Extensions > Ink/Stitch > Fill Tools > Tartan and adjust stripe settings:"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:122
+#: lib/elements/fill_stitch.py:123
 msgid "* Check if stripes are active"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:123
+#: lib/elements/fill_stitch.py:124
 msgid "* Check the minimum stripe width setting and the scale factor"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:128
+#: lib/elements/fill_stitch.py:129
 msgid "No customized pattern"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:129
+#: lib/elements/fill_stitch.py:130
 msgid "Tartan fill: Using default pattern"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:132
+#: lib/elements/fill_stitch.py:133
 msgid "* Customize your pattern"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:137
+#: lib/elements/fill_stitch.py:138
 msgid "This shape is invalid"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:138
+#: lib/elements/fill_stitch.py:139
 msgid "Fill: This shape cannot be stitched out. Please try to repair it with the \"Break Apart Fill Objects\" extension."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:145
+#: lib/elements/fill_stitch.py:146
 msgid "FillStitch"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:148
+#: lib/elements/fill_stitch.py:149
 msgid "Automatically routed fill stitching"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:152
+#: lib/elements/fill_stitch.py:153
 msgid "Auto Fill"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:153 inx/inkstitch_select_elements.inx:56
+#: lib/elements/fill_stitch.py:154 inx/inkstitch_select_elements.inx:56
 msgid "Circular Fill"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:154 inx/inkstitch_select_elements.inx:57
+#: lib/elements/fill_stitch.py:155 inx/inkstitch_select_elements.inx:57
 msgid "Contour Fill"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:155 inx/inkstitch_select_elements.inx:58
+#: lib/elements/fill_stitch.py:156 inx/inkstitch_select_elements.inx:58
 msgid "Guided Fill"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:156 inx/inkstitch_select_elements.inx:59
+#: lib/elements/fill_stitch.py:157 inx/inkstitch_select_elements.inx:59
 msgid "Linear Gradient Fill"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:157 inx/inkstitch_select_elements.inx:60
+#: lib/elements/fill_stitch.py:158 inx/inkstitch_select_elements.inx:60
 msgid "Meander Fill"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:158 inx/inkstitch_select_elements.inx:61
+#: lib/elements/fill_stitch.py:159 inx/inkstitch_select_elements.inx:61
 msgid "Tartan Fill"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:159 lib/gui/tartan/embroidery_panel.py:202
+#: lib/elements/fill_stitch.py:160 lib/gui/tartan/embroidery_panel.py:202
 #: inx/inkstitch_select_elements.inx:62
 msgid "Legacy Fill"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:163
+#: lib/elements/fill_stitch.py:164
 msgid "Fill method"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:172
+#: lib/elements/fill_stitch.py:173
 msgid "Guided Fill Strategy"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:173
+#: lib/elements/fill_stitch.py:174
 msgid "Copy"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:173
+#: lib/elements/fill_stitch.py:174
 msgid "Parallel Offset"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:174
+#: lib/elements/fill_stitch.py:175
 msgid "Copy (the default) will fill the shape with shifted copies of the line. Parallel offset will ensure that each line is always a consistent distance from its neighbor. Sharp corners may be introduced."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:181
+#: lib/elements/fill_stitch.py:182
 msgid "Contour Fill Strategy"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:182
+#: lib/elements/fill_stitch.py:183
 msgid "Inner to Outer"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:182
+#: lib/elements/fill_stitch.py:183
 msgid "Single spiral"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:182
+#: lib/elements/fill_stitch.py:183
 msgid "Double spiral"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:187
+#: lib/elements/fill_stitch.py:188
 msgid "Join Style"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:188
+#: lib/elements/fill_stitch.py:189
 msgid "Round"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:188
+#: lib/elements/fill_stitch.py:189
 msgid "Mitered"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:188
+#: lib/elements/fill_stitch.py:189
 msgid "Beveled"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:194
+#: lib/elements/fill_stitch.py:195
 msgid "Avoid self-crossing"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:203
+#: lib/elements/fill_stitch.py:204
 msgid "Clockwise"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:208
+#: lib/elements/fill_stitch.py:209
 msgid "Meander Pattern"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:215
+#: lib/elements/fill_stitch.py:216
 msgid "Meander pattern angle"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:225
+#: lib/elements/fill_stitch.py:226
 msgid "Meander pattern scale"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:226
+#: lib/elements/fill_stitch.py:227
 msgid "Percentage to stretch or compress the meander pattern.  You can scale horizontally and vertically individually by giving two percentages separated by a space. "
 msgstr ""
 
-#: lib/elements/fill_stitch.py:236
+#: lib/elements/fill_stitch.py:237
 msgid "Clip path"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:237
+#: lib/elements/fill_stitch.py:238
 msgid "Constrain stitching to the shape.  Useful when smoothing and expand are used."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:246
+#: lib/elements/fill_stitch.py:247
 msgid "Smoothness"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:247
+#: lib/elements/fill_stitch.py:248
 msgid "Smooth the stitch path.  Smoothness limits how far the smoothed stitch path is allowed to deviate from the original path.  Try low numbers like 0.2.  Hint: a lower running stitch tolerance may be needed too."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:263
+#: lib/elements/fill_stitch.py:264
 msgid "Expand the shape before fill stitching, to compensate for gaps between shapes.  Negative values contract instead."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:279 lib/elements/fill_stitch.py:292
+#: lib/elements/fill_stitch.py:280 lib/elements/fill_stitch.py:293
 #: lib/gui/tartan/embroidery_panel.py:35
 msgid "Angle of lines of stitches"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:280
+#: lib/elements/fill_stitch.py:281
 msgid "The angle increases in a counter-clockwise direction.  0 is horizontal.  Negative angles are allowed."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:293 lib/gui/tartan/embroidery_panel.py:36
+#: lib/elements/fill_stitch.py:294 lib/gui/tartan/embroidery_panel.py:36
 msgid "Relative to the tartan stripe direction."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:305
+#: lib/elements/fill_stitch.py:306
 msgid "Maximum fill stitch length"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:306
+#: lib/elements/fill_stitch.py:307
 msgid "The length of each stitch in a row.  Shorter stitch may be used at the start or end of a row."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:323
+#: lib/elements/fill_stitch.py:324
 msgid "Spacing between rows"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:324
+#: lib/elements/fill_stitch.py:325
 msgid "Distance between rows of stitches."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:341 inx/inkstitch_gradient_blocks.inx:22
+#: lib/elements/fill_stitch.py:342 inx/inkstitch_gradient_blocks.inx:22
 msgid "End row spacing"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:342
+#: lib/elements/fill_stitch.py:343
 msgid "Increases or decreases the row spacing towards the end."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:356
+#: lib/elements/fill_stitch.py:357
 msgid "Stagger rows this many times before repeating"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:357 lib/elements/satin_column.py:204
+#: lib/elements/fill_stitch.py:358 lib/elements/satin_column.py:204
 msgid "Length of the cycle by which successive stitch rows are staggered. Fractional values are allowed and can have less visible diagonals than integer values."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:373 lib/elements/fill_stitch.py:663
+#: lib/elements/fill_stitch.py:374 lib/elements/fill_stitch.py:664
 msgid "Skip last stitch in each row"
 msgstr "Hoppa över sista stygnet i varje rad"
 
-#: lib/elements/fill_stitch.py:374 lib/elements/fill_stitch.py:664
+#: lib/elements/fill_stitch.py:375 lib/elements/fill_stitch.py:665
 msgid "The last stitch in each row is quite close to the first stitch in the next row.  Skipping it decreases stitch count and density."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:389
+#: lib/elements/fill_stitch.py:390
 msgid "Flip fill (start right-to-left)"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:390
+#: lib/elements/fill_stitch.py:391
 msgid "The flip option can help you with routing your stitch path.  When you enable flip, stitching goes from right-to-left instead of left-to-right."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:402
+#: lib/elements/fill_stitch.py:403
 msgid "Reverse fill"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:403
+#: lib/elements/fill_stitch.py:404
 msgid "Reverses fill path."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:414
+#: lib/elements/fill_stitch.py:415
 msgid "Stop at ending point"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:415
+#: lib/elements/fill_stitch.py:416
 msgid "If this option is disabled, the ending point will only be used to define a general direction for stitch routing. When enabled the last section will end at the defined spot."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:427 lib/elements/fill_stitch.py:675
+#: lib/elements/fill_stitch.py:428 lib/elements/fill_stitch.py:676
 msgid "Underpath"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:428 lib/elements/fill_stitch.py:676
+#: lib/elements/fill_stitch.py:429 lib/elements/fill_stitch.py:677
 msgid "Travel inside the shape when moving from section to section.  Underpath stitches avoid traveling in the direction of the row angle so that they are not visible.  This gives them a jagged appearance."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:440 lib/elements/stroke.py:108
+#: lib/elements/fill_stitch.py:441 lib/elements/stroke.py:108
 msgid "Running stitch length"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:441
+#: lib/elements/fill_stitch.py:442
 msgid "Length of stitches around the outline of the fill region used when moving from section to section. Also used for meander and circular fill."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:458
+#: lib/elements/fill_stitch.py:459
 msgid "Running stitch tolerance"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:459
+#: lib/elements/fill_stitch.py:460
 msgid "Determines how hard Ink/Stitch tries to avoid stitching outside the shape.Lower numbers are less likely to stitch outside the shape but require more stitches."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:477 lib/elements/stroke.py:134
+#: lib/elements/fill_stitch.py:478 lib/elements/stroke.py:134
 msgid "Randomize stitches"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:478 lib/elements/stroke.py:135
+#: lib/elements/fill_stitch.py:479 lib/elements/stroke.py:135
 msgid "Randomize stitch length and phase instead of dividing evenly or staggering. This is recommended for closely-spaced curved fills to avoid Moiré artefacts."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:492 lib/elements/stroke.py:146
+#: lib/elements/fill_stitch.py:493 lib/elements/stroke.py:146
 msgid "Random stitch length jitter"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:493 lib/elements/stroke.py:147
+#: lib/elements/fill_stitch.py:494 lib/elements/stroke.py:147
 msgid "Amount to vary the length of each stitch by when randomizing."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:507 lib/elements/satin_column.py:441
+#: lib/elements/fill_stitch.py:508 lib/elements/satin_column.py:441
 #: lib/elements/stroke.py:82
 msgid "Repeats"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:508 lib/elements/stroke.py:83
+#: lib/elements/fill_stitch.py:509 lib/elements/stroke.py:83
 msgid "Defines how many times to run down and back along the path."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:519 lib/elements/stroke.py:94
+#: lib/elements/fill_stitch.py:520 lib/elements/stroke.py:94
 msgid "Bean stitch number of repeats"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:520 lib/elements/stroke.py:95
+#: lib/elements/fill_stitch.py:521 lib/elements/stroke.py:95
 msgid "Backtrack each stitch this many times.  A value of 1 would triple each stitch (forward, back, forward).  A value of 2 would quintuple each stitch, etc.\n\n"
 "A pattern with various repeats can be created with a list of values separated by a space."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:535 lib/elements/satin_column.py:239
+#: lib/elements/fill_stitch.py:536 lib/elements/satin_column.py:239
 #: lib/elements/stroke.py:172
 msgid "Zig-zag spacing (peak-to-peak)"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:536 lib/elements/stroke.py:173
+#: lib/elements/fill_stitch.py:537 lib/elements/stroke.py:173
 msgid "Length of stitches in zig-zag mode."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:548
+#: lib/elements/fill_stitch.py:549
 msgid "Zig-zag width"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:549
+#: lib/elements/fill_stitch.py:550
 msgid "Width of the zig-zag line."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:562 lib/gui/tartan/embroidery_panel.py:42
+#: lib/elements/fill_stitch.py:563 lib/gui/tartan/embroidery_panel.py:42
 msgid "Rows per tartan thread"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:563 lib/gui/tartan/embroidery_panel.py:44
+#: lib/elements/fill_stitch.py:564 lib/gui/tartan/embroidery_panel.py:44
 msgid "Consecutive rows of the same color"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:574
+#: lib/elements/fill_stitch.py:575
 msgid "Herringbone width"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:575
+#: lib/elements/fill_stitch.py:576
 msgid "Defines width of a herringbone pattern. Use 0 for regular rows."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:597 lib/elements/fill_stitch.py:606
-#: lib/elements/fill_stitch.py:633 lib/elements/fill_stitch.py:644
-#: lib/elements/fill_stitch.py:654 lib/elements/fill_stitch.py:666
-#: lib/elements/fill_stitch.py:679
+#: lib/elements/fill_stitch.py:598 lib/elements/fill_stitch.py:607
+#: lib/elements/fill_stitch.py:634 lib/elements/fill_stitch.py:645
+#: lib/elements/fill_stitch.py:655 lib/elements/fill_stitch.py:667
+#: lib/elements/fill_stitch.py:680
 msgid "Fill Underlay"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:597 lib/gui/tartan/embroidery_panel.py:55
+#: lib/elements/fill_stitch.py:598 lib/gui/tartan/embroidery_panel.py:55
 #: inx/inkstitch_select_elements.inx:36 inx/inkstitch_select_elements.inx:64
 #: inx/inkstitch_select_elements.inx:66
 msgid "Underlay"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:603
+#: lib/elements/fill_stitch.py:604
 msgid "Fill angle"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:604
+#: lib/elements/fill_stitch.py:605
 msgid "Default: fill angle + 90 deg. Insert a list for multiple layers separated by a space."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:630 lib/gui/tartan/embroidery_panel.py:77
+#: lib/elements/fill_stitch.py:631 lib/gui/tartan/embroidery_panel.py:77
 msgid "Row spacing"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:631
+#: lib/elements/fill_stitch.py:632
 msgid "default: 3x fill row spacing"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:641 lib/elements/stroke.py:158
+#: lib/elements/fill_stitch.py:642 lib/elements/stroke.py:158
 #: lib/extensions/element_info.py:125 lib/extensions/element_info.py:181
 msgid "Max stitch length"
 msgstr "Max stygn längd"
 
-#: lib/elements/fill_stitch.py:642
+#: lib/elements/fill_stitch.py:643
 msgid "default: equal to fill max stitch length"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:652
+#: lib/elements/fill_stitch.py:653
 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:687 lib/elements/satin_column.py:522
-#: lib/elements/stroke.py:396 lib/gui/satin_multicolor/colorize_panel.py:56
+#: lib/elements/fill_stitch.py:688 lib/elements/satin_column.py:522
+#: lib/elements/stroke.py:396 lib/gui/satin_multicolor/colorize_panel.py:57
 msgid "Random seed"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:688 lib/elements/satin_column.py:523
+#: lib/elements/fill_stitch.py:689 lib/elements/satin_column.py:523
 #: lib/elements/stroke.py:397
 msgid "Use a specific seed for randomized attributes. Uses the element ID if empty."
 msgstr ""
@@ -2453,7 +2453,7 @@ msgid "All Selected Elements"
 msgstr ""
 
 #: lib/extensions/element_info.py:153 lib/extensions/zip.py:135
-#: lib/gui/satin_multicolor/colorize_panel.py:67
+#: lib/gui/satin_multicolor/colorize_panel.py:68
 msgid "Colors"
 msgstr "Färg"
 
@@ -3095,7 +3095,7 @@ msgstr ""
 msgid "Load"
 msgstr ""
 
-#: lib/gui/presets.py:61 lib/gui/satin_multicolor/colorize_panel.py:73
+#: lib/gui/presets.py:61 lib/gui/satin_multicolor/colorize_panel.py:74
 #: lib/gui/tartan/customize_panel.py:65 lib/gui/tartan/customize_panel.py:67
 msgid "Add"
 msgstr "Lägg till"
@@ -3126,67 +3126,67 @@ msgstr ""
 msgid "Preset \"%s\" already exists.  Please use another name or press \"Overwrite\""
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:26
-msgid "General Settings"
+#: lib/gui/satin_multicolor/color_panel.py:19
+msgid "Click to move color up."
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:29
-msgid "Equidistant colors"
+#: lib/gui/satin_multicolor/color_panel.py:23
+msgid "Select color"
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:30
-msgid "Whether colors should be equidistant or have varying widths."
+#: lib/gui/satin_multicolor/color_panel.py:28
+msgid "Monochrome width. Can be changed individually when equidistance is disabled."
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:35
-msgid "Monochrome color width"
+#: lib/gui/satin_multicolor/color_panel.py:33
+msgid "Margin right (bicolor section). Can be changed individually when equidistance is disabled."
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:36
-msgid "Adapt color width here when equidistance is enabled."
+#: lib/gui/satin_multicolor/color_panel.py:37
+msgid "Remove color"
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:41
-msgid "Overflow left"
+#: lib/gui/satin_multicolor/colorize_panel.py:27
+msgid "General Settings"
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:46
-msgid "Overflow right"
+#: lib/gui/satin_multicolor/colorize_panel.py:30
+msgid "Equidistant colors"
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:51
-msgid "Pull compensation (mm)"
+#: lib/gui/satin_multicolor/colorize_panel.py:31
+msgid "Whether colors should be equidistant or have varying widths."
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:62
-msgid "Keep original satin"
+#: lib/gui/satin_multicolor/colorize_panel.py:36
+msgid "Monochrome color width"
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:71
-msgid "Overflow excluded"
+#: lib/gui/satin_multicolor/colorize_panel.py:37
+msgid "Adapt color width here when equidistance is enabled."
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:124
-msgid "Click to move color up."
+#: lib/gui/satin_multicolor/colorize_panel.py:42
+msgid "Overflow left"
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:128
-msgid "Select color"
+#: lib/gui/satin_multicolor/colorize_panel.py:47
+msgid "Overflow right"
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:133
-msgid "Monochrome width. Can be changed individually when equidistance is disabled."
+#: lib/gui/satin_multicolor/colorize_panel.py:52
+msgid "Pull compensation (mm)"
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:138
-msgid "Margin right (bicolor section). Can be changed individually when equidistance is disabled."
+#: lib/gui/satin_multicolor/colorize_panel.py:63
+msgid "Keep original satin"
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:142
-msgid "Remove color"
+#: lib/gui/satin_multicolor/colorize_panel.py:72
+msgid "Overflow excluded"
 msgstr ""
 
-#: lib/gui/satin_multicolor/colorize_panel.py:253
+#: lib/gui/satin_multicolor/colorize_panel.py:221
 msgid "Total width: {width}%"
 msgstr ""
 
@@ -3641,7 +3641,7 @@ msgstr ""
 msgid "There is no selected stitchable element. Please run Extensions > Ink/Stitch > Troubleshoot > Troubleshoot objects in case you have expected a stitchout."
 msgstr ""
 
-#: lib/stitches/auto_run.py:139 lib/stitches/auto_satin.py:362
+#: lib/stitches/auto_run.py:139 lib/stitches/auto_satin.py:364
 msgid "Auto-Route"
 msgstr ""
 
@@ -3657,14 +3657,14 @@ msgstr ""
 
 #. Label for a satin column created by Auto-Route Satin Columns and Lettering
 #. extensions
-#: lib/stitches/auto_satin.py:535
+#: lib/stitches/auto_satin.py:537
 #, python-format
 msgid "AutoSatin %d"
 msgstr ""
 
 #. Label for running stitch (underpathing) created by Auto-Route Satin Columns
 #. amd Lettering extensions
-#: lib/stitches/auto_satin.py:538
+#: lib/stitches/auto_satin.py:540
 #, python-format
 msgid "AutoSatin Running Stitch %d"
 msgstr ""