new translations from Crowdin

1 files changed, 364 insertions, 222 deletions

diff --git a/translations/messages_uk_UA.po b/translations/messages_uk_UA.po
index a5858da7..0d18a56f 100644
--- a/translations/messages_uk_UA.po
+++ b/translations/messages_uk_UA.po
@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2025-07-08 01:52+0000\n"
-"PO-Revision-Date: 2025-07-08 01:52\n"
+"POT-Creation-Date: 2025-07-20 02:08+0000\n"
+"PO-Revision-Date: 2025-07-20 02:08\n"
 "Last-Translator: \n"
 "Language-Team: Ukrainian\n"
 "MIME-Version: 1.0\n"
@@ -12,7 +12,7 @@ msgstr ""
 "Generated-By: Babel 2.17.0\n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-07-08 01:52+0000\n"
+"POT-Creation-Date: 2025-07-20 02:07+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1111,126 +1111,126 @@ msgstr ""
 msgid "Flip automatically calculated angle if it appears to be wrong."
 msgstr ""
 
-#: lib/elements/element.py:251 lib/gui/preferences.py:59
+#: lib/elements/element.py:274 lib/gui/preferences.py:59
 #: lib/gui/preferences.py:128
 msgid "Minimum stitch length"
 msgstr ""
 
-#: lib/elements/element.py:252
+#: lib/elements/element.py:275
 msgid "Overwrite global minimum stitch length setting. Shorter stitches than that will be removed."
 msgstr ""
 
-#: lib/elements/element.py:262 lib/gui/preferences.py:41
+#: lib/elements/element.py:285 lib/gui/preferences.py:41
 msgid "Minimum jump stitch length"
 msgstr ""
 
-#: lib/elements/element.py:263
+#: lib/elements/element.py:286
 msgid "Overwrite global minimum jump stitch length setting. Shorter distances to the next object will have no lock stitches."
 msgstr ""
 
-#: lib/elements/element.py:273
+#: lib/elements/element.py:296
 msgid "Allow lock stitches"
 msgstr "Дозволити додавати закріпки"
 
-#: lib/elements/element.py:274
+#: lib/elements/element.py:297
 msgid "Tie thread at the beginning and/or end of this object. Manual stitch will only add lock stitches if force lock stitched is checked."
 msgstr ""
 
 #. options to allow lock stitch before and after objects
-#: lib/elements/element.py:279
+#: lib/elements/element.py:302
 msgid "Both"
 msgstr "Обидва"
 
-#: lib/elements/element.py:279
+#: lib/elements/element.py:302
 msgid "Before"
 msgstr "Початок"
 
-#: lib/elements/element.py:279
+#: lib/elements/element.py:302
 msgid "After"
 msgstr "Кінець"
 
-#: lib/elements/element.py:279
+#: lib/elements/element.py:302
 msgid "Neither"
 msgstr "Не додавати"
 
-#: lib/elements/element.py:288
+#: lib/elements/element.py:311
 #: inx/inkstitch_lettering_force_lock_stitches.inx:3
 msgid "Force lock stitches"
 msgstr ""
 
-#: lib/elements/element.py:289
+#: lib/elements/element.py:312
 msgid "Sew lock stitches after sewing this element, even if the distance to the next object is shorter than defined by the minimum jump stitch length value in the Ink/Stitch preferences."
 msgstr ""
 
-#: lib/elements/element.py:301
+#: lib/elements/element.py:324
 msgid "Tack stitch"
 msgstr ""
 
-#: lib/elements/element.py:302
+#: lib/elements/element.py:325
 msgid "Tack down stitch type"
 msgstr ""
 
-#: lib/elements/element.py:312 lib/elements/element.py:358
+#: lib/elements/element.py:335 lib/elements/element.py:381
 msgid "Custom path"
 msgstr ""
 
-#: lib/elements/element.py:313
+#: lib/elements/element.py:336
 msgid "Enter a custom path. For svg paths The last node will not be embroidered, but represents the first stitch of the element."
 msgstr ""
 
-#: lib/elements/element.py:323 lib/elements/element.py:335
+#: lib/elements/element.py:346 lib/elements/element.py:358
 msgid "Scale tack stitch"
 msgstr ""
 
-#: lib/elements/element.py:324
+#: lib/elements/element.py:347
 msgid "Set stitch length. A 1 in a custom path equals this values."
 msgstr ""
 
-#: lib/elements/element.py:336
+#: lib/elements/element.py:359
 msgid "Scale tack stitch by this percentage."
 msgstr ""
 
-#: lib/elements/element.py:347
+#: lib/elements/element.py:370
 msgid "Lock stitch"
 msgstr ""
 
-#: lib/elements/element.py:348
+#: lib/elements/element.py:371
 msgid "Lock stitch type"
 msgstr ""
 
-#: lib/elements/element.py:359
+#: lib/elements/element.py:382
 msgid "Enter a custom path. For svg paths the first node will not be embroidered, but represents the last stitch of the element."
 msgstr ""
 
-#: lib/elements/element.py:369 lib/elements/element.py:381
+#: lib/elements/element.py:392 lib/elements/element.py:404
 msgid "Scale lock stitch"
 msgstr ""
 
-#: lib/elements/element.py:370
+#: lib/elements/element.py:393
 msgid "Set length of lock stitches (mm)."
 msgstr ""
 
-#: lib/elements/element.py:382
+#: lib/elements/element.py:405
 msgid "Scale lock stitch by this percentage."
 msgstr ""
 
-#: lib/elements/element.py:394
+#: lib/elements/element.py:417
 msgid "Trim After"
 msgstr ""
 
-#: lib/elements/element.py:395
+#: lib/elements/element.py:418
 msgid "Add a TRIM command after stitching this object."
 msgstr ""
 
-#: lib/elements/element.py:404
+#: lib/elements/element.py:427
 msgid "Stop After"
 msgstr ""
 
-#: lib/elements/element.py:405
+#: lib/elements/element.py:428
 msgid "Add a STOP command after stitching this object."
 msgstr ""
 
-#: lib/elements/element.py:704
+#: lib/elements/element.py:727
 msgid "Please run Extensions > Ink/Stitch > Troubleshoot > Troubleshoot objects. This will show you the exact location of the problem."
 msgstr ""
 
@@ -1262,7 +1262,7 @@ msgstr "Розширити"
 msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead."
 msgstr "Параметр розширення не можна застосувати для цього об'єкта гладі. Замість нього Ink/Stitch буде використовувати оригінальний розмір."
 
-#: lib/elements/fill_stitch.py:49 lib/elements/fill_stitch.py:700
+#: lib/elements/fill_stitch.py:49 lib/elements/fill_stitch.py:698
 msgid "Inset"
 msgstr "Вставки"
 
@@ -1590,15 +1590,15 @@ msgstr ""
 msgid "Stagger rows this many times before repeating"
 msgstr "Повторний рядок це багато разів, перш ніж повторити"
 
-#: lib/elements/fill_stitch.py:372 lib/elements/satin_column.py:215
+#: lib/elements/fill_stitch.py:372 lib/elements/satin_column.py:217
 msgid "Length of the cycle by which successive stitch rows are staggered. Fractional values are allowed and can have less visible diagonals than integer values."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:388 lib/elements/fill_stitch.py:712
+#: lib/elements/fill_stitch.py:388 lib/elements/fill_stitch.py:710
 msgid "Skip last stitch in each row"
 msgstr "Пропустіть останній стібок у кожному ряду"
 
-#: lib/elements/fill_stitch.py:389 lib/elements/fill_stitch.py:713
+#: lib/elements/fill_stitch.py:389 lib/elements/fill_stitch.py:711
 msgid "The last stitch in each row is quite close to the first stitch in the next row.  Skipping it decreases stitch count and density."
 msgstr "Останній стібок у кожному ряду досить близький до першого стібка в наступному ряду. Пропускаючи його, зменшується кількість швів і щільність."
 
@@ -1626,15 +1626,15 @@ msgstr ""
 msgid "If this option is disabled, the ending point will only be used to define a general direction for stitch routing. When enabled the last section will end at the defined spot."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:442 lib/elements/fill_stitch.py:724
+#: lib/elements/fill_stitch.py:442 lib/elements/fill_stitch.py:722
 msgid "Underpath"
 msgstr "Нижні переходи"
 
-#: lib/elements/fill_stitch.py:443 lib/elements/fill_stitch.py:725
+#: lib/elements/fill_stitch.py:443 lib/elements/fill_stitch.py:723
 msgid "Travel inside the shape when moving from section to section.  Underpath stitches avoid traveling in the direction of the row angle so that they are not visible.  This gives them a jagged appearance."
 msgstr "Переміщення всередині контуру при переході від секції до секції. Рядок переходів під гладдю або прострочкою уникає напрямків рядів, тому її не видно. Це робить поверхню гладі трохи нерівною."
 
-#: lib/elements/fill_stitch.py:455 lib/elements/satin_column.py:364
+#: lib/elements/fill_stitch.py:455 lib/elements/satin_column.py:366
 #: lib/elements/stroke.py:120
 msgid "Running stitch length"
 msgstr "Довжина стіжка по лінії"
@@ -1643,11 +1643,11 @@ msgstr "Довжина стіжка по лінії"
 msgid "Length of stitches around the outline of the fill region used when moving from section to section. Also used for meander and circular fill."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:473 lib/elements/satin_column.py:375
+#: lib/elements/fill_stitch.py:473 lib/elements/satin_column.py:377
 msgid "Running stitch tolerance"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:474 lib/elements/satin_column.py:376
+#: lib/elements/fill_stitch.py:474 lib/elements/satin_column.py:378
 msgid "Determines how hard Ink/Stitch tries to avoid stitching outside the shape.Lower numbers are less likely to stitch outside the shape but require more stitches."
 msgstr ""
 
@@ -1667,7 +1667,7 @@ msgstr ""
 msgid "Amount to vary the length of each stitch by when randomizing."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:525 lib/elements/satin_column.py:500
+#: lib/elements/fill_stitch.py:525 lib/elements/satin_column.py:502
 #: lib/elements/stroke.py:82
 #: lib/sew_stack/stitch_layers/running_stitch/running_stitch_layer.py:33
 #: lib/sew_stack/stitch_layers/running_stitch/running_stitch_layer.py:35
@@ -1688,7 +1688,7 @@ msgid "Backtrack each stitch this many times.  A value of 1 would triple each st
 "A pattern with various repeats can be created with a list of values separated by a space."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:250
+#: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:252
 #: lib/elements/stroke.py:185
 msgid "Zig-zag spacing (peak-to-peak)"
 msgstr "Щільність зигзага (відстань між піками)"
@@ -1721,7 +1721,7 @@ msgstr ""
 msgid "Defines width of a herringbone pattern. Use 0 for regular rows."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:605 lib/elements/satin_column.py:278
+#: lib/elements/fill_stitch.py:605 lib/elements/satin_column.py:280
 #: lib/elements/stroke.py:198
 msgid "Pull compensation"
 msgstr "Компенсації розтягування"
@@ -1730,13 +1730,13 @@ msgstr "Компенсації розтягування"
 msgid "Fill stitch can pull the fabric together, resulting in a shape narrower than you draw in Inkscape. This setting expands each row of stitches outward from the center of the row by a fixed length. Two values separated by a space may be used for an asymmetric effect."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:610 lib/elements/satin_column.py:282
-#: lib/elements/satin_column.py:445 lib/elements/satin_column.py:539
+#: lib/elements/fill_stitch.py:610 lib/elements/satin_column.py:284
+#: lib/elements/satin_column.py:447 lib/elements/satin_column.py:541
 #: lib/elements/stroke.py:201
 msgid "mm (each side)"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:621 lib/elements/satin_column.py:263
+#: lib/elements/fill_stitch.py:621 lib/elements/satin_column.py:265
 msgid "Pull compensation percentage"
 msgstr ""
 
@@ -1744,61 +1744,61 @@ msgstr ""
 msgid "Additional pull compensation which varies as a percentage of row width. Two values separated by a space may be used for an asymmetric effect."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:625 lib/elements/satin_column.py:132
-#: lib/elements/satin_column.py:142 lib/elements/satin_column.py:266
-#: lib/elements/satin_column.py:460 lib/elements/satin_column.py:559
+#: lib/elements/fill_stitch.py:625 lib/elements/satin_column.py:134
+#: lib/elements/satin_column.py:144 lib/elements/satin_column.py:268
+#: lib/elements/satin_column.py:462 lib/elements/satin_column.py:561
 msgid "% (each side)"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:646 lib/elements/fill_stitch.py:655
-#: lib/elements/fill_stitch.py:682 lib/elements/fill_stitch.py:693
-#: lib/elements/fill_stitch.py:703 lib/elements/fill_stitch.py:715
-#: lib/elements/fill_stitch.py:728
+#: lib/elements/fill_stitch.py:644 lib/elements/fill_stitch.py:653
+#: lib/elements/fill_stitch.py:680 lib/elements/fill_stitch.py:691
+#: lib/elements/fill_stitch.py:701 lib/elements/fill_stitch.py:713
+#: lib/elements/fill_stitch.py:726
 msgid "Fill Underlay"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:646 lib/gui/tartan/embroidery_panel.py:55
+#: lib/elements/fill_stitch.py:644 lib/gui/tartan/embroidery_panel.py:55
 #: inx/inkstitch_select_elements.inx:36 inx/inkstitch_select_elements.inx:64
 #: inx/inkstitch_select_elements.inx:66
 msgid "Underlay"
 msgstr "Підкладка"
 
-#: lib/elements/fill_stitch.py:652
+#: lib/elements/fill_stitch.py:650
 msgid "Fill angle"
 msgstr "Кут заповнення"
 
-#: lib/elements/fill_stitch.py:653
+#: lib/elements/fill_stitch.py:651
 msgid "Default: fill angle + 90 deg. Insert a list for multiple layers separated by a space."
 msgstr ""
 
-#: lib/elements/fill_stitch.py:679 lib/gui/tartan/embroidery_panel.py:77
+#: lib/elements/fill_stitch.py:677 lib/gui/tartan/embroidery_panel.py:77
 msgid "Row spacing"
 msgstr "Міжрядковий інтервал"
 
-#: lib/elements/fill_stitch.py:680
+#: lib/elements/fill_stitch.py:678
 msgid "default: 3x fill row spacing"
 msgstr "типовий: 3-кратний проміжок між рядками"
 
-#: lib/elements/fill_stitch.py:690 lib/elements/stroke.py:171
+#: lib/elements/fill_stitch.py:688 lib/elements/stroke.py:171
 #: lib/extensions/element_info.py:144 lib/extensions/element_info.py:203
 msgid "Max stitch length"
 msgstr "Максимальна довжина стібка"
 
-#: lib/elements/fill_stitch.py:691
+#: lib/elements/fill_stitch.py:689
 msgid "default: equal to fill max stitch length"
 msgstr "типовий: дорівнює максимальній довжині стібка"
 
-#: lib/elements/fill_stitch.py:701
+#: lib/elements/fill_stitch.py:699
 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill."
 msgstr "Перед тим, як робити підкладку, стисніть форму, щоб запобігти появі підкладки навколо зовнішньої сторони заповнення."
 
-#: lib/elements/fill_stitch.py:736 lib/elements/satin_column.py:581
+#: lib/elements/fill_stitch.py:734 lib/elements/satin_column.py:583
 #: lib/elements/stroke.py:450 lib/gui/satin_multicolor/colorize_panel.py:61
 #: lib/sew_stack/stitch_layers/mixins/randomization.py:59
 msgid "Random seed"
 msgstr ""
 
-#: lib/elements/fill_stitch.py:737 lib/elements/satin_column.py:582
+#: lib/elements/fill_stitch.py:735 lib/elements/satin_column.py:584
 #: lib/elements/stroke.py:451
 msgid "Use a specific seed for randomized attributes. Uses the element ID if empty."
 msgstr ""
@@ -1843,420 +1843,420 @@ msgstr "* Перейдіть на вкладку Стиль обведення"
 msgid "* Under \"Markers\" choose the first (empty) option in the first dropdown list."
 msgstr "* У розділі \"Маркери\" виберіть перший (порожній) параметр у першому розкривному списку."
 
-#: lib/elements/satin_column.py:32 lib/elements/stroke.py:34
-msgid "Too few subpaths"
-msgstr "Занадто мало ліній"
-
-#: lib/elements/satin_column.py:33
-msgid "Satin column: Object has too few subpaths.  A satin column should have at least two subpaths (the rails)."
-msgstr "Сатинова колонка: в об'єкті замало ліній. У сатиновій колонці має бути принаймні дві лінії (напрямні)."
-
-#: lib/elements/satin_column.py:35
-msgid "* Add another subpath (select two rails and do Path > Combine)"
-msgstr "* Додайте ще одну лінію (виділіть дві направляючі і виконайте Контур > Об'єднати)"
-
-#: lib/elements/satin_column.py:36
-msgid "* Convert to running stitch or simple satin (Params extension)"
-msgstr "* Конвертуйте в стрічку або зигзаг (через Параметри)"
-
-#: lib/elements/satin_column.py:41
+#: lib/elements/satin_column.py:34
 msgid "Not stitchable satin column"
 msgstr ""
 
-#: lib/elements/satin_column.py:42
+#: lib/elements/satin_column.py:35
 msgid "A satin column consists out of two rails and one or more rungs. This satin column may have a different setup."
 msgstr ""
 
-#: lib/elements/satin_column.py:44
+#: lib/elements/satin_column.py:37
 msgid "Make sure your satin column is not a combination of multiple satin columns."
 msgstr ""
 
-#: lib/elements/satin_column.py:45
+#: lib/elements/satin_column.py:38
 msgid "Go to our website and read how a satin column should look like https://inkstitch.org/docs/stitches/satin-column/"
 msgstr ""
 
-#: lib/elements/satin_column.py:49
+#: lib/elements/satin_column.py:42
 msgid "Each rung should intersect both rails once."
 msgstr "Кожна поперечка повинна пересікати обидві направляючі."
 
-#: lib/elements/satin_column.py:53
+#: lib/elements/satin_column.py:46
 msgid "Rail is a closed path"
 msgstr ""
 
-#: lib/elements/satin_column.py:54
+#: lib/elements/satin_column.py:47
 msgid "Rail is a closed path without a definite starting and ending point."
 msgstr ""
 
-#: lib/elements/satin_column.py:56
+#: lib/elements/satin_column.py:49
 msgid "* Select the node where you want the satin to start."
 msgstr ""
 
-#: lib/elements/satin_column.py:57
+#: lib/elements/satin_column.py:50
 msgid "* Click on: Break path at selected nodes."
 msgstr ""
 
-#: lib/elements/satin_column.py:62
+#: lib/elements/satin_column.py:55
 msgid "Rung doesn't intersect rails"
 msgstr "Поперечка не пересекає направляючі"
 
-#: lib/elements/satin_column.py:63
+#: lib/elements/satin_column.py:56
 msgid "Satin column: A rung doesn't intersect both rails."
 msgstr "Сатинова колонка: Поперечка не пересікає обидві направляючі."
 
-#: lib/elements/satin_column.py:67
+#: lib/elements/satin_column.py:60
 msgid "Satin has no rungs"
 msgstr ""
 
-#: lib/elements/satin_column.py:68
+#: lib/elements/satin_column.py:61
 msgid "Rungs control the stitch direction in satin columns. It is best pratice to use them."
 msgstr ""
 
-#: lib/elements/satin_column.py:70 lib/elements/satin_column.py:84
-#: lib/elements/satin_column.py:95
+#: lib/elements/satin_column.py:63 lib/elements/satin_column.py:86
+#: lib/elements/satin_column.py:97
 msgid "* With the selected object press \"P\" to activate the pencil tool."
 msgstr "* Коли об'єкт вибрано, натисніть клавішу \"P\", щоб вибрати інструмент Олівець."
 
-#: lib/elements/satin_column.py:71 lib/elements/satin_column.py:85
+#: lib/elements/satin_column.py:64 lib/elements/satin_column.py:87
 msgid "* Hold \"Shift\" while drawing a rung."
 msgstr ""
 
-#: lib/elements/satin_column.py:76
+#: lib/elements/satin_column.py:69
 msgid "Rungs intersects too many times"
 msgstr "Поперечки пересікаються забагато разів"
 
-#: lib/elements/satin_column.py:77
+#: lib/elements/satin_column.py:70
 msgid "Satin column: A rung intersects a rail more than once."
 msgstr "Сатинова колонка: поперечка пересікає направляючу більше одного разу."
 
-#: lib/elements/satin_column.py:81
+#: lib/elements/satin_column.py:74
+msgid "Simple Satin"
+msgstr ""
+
+#: lib/elements/satin_column.py:77
+msgid "* Select the satin path"
+msgstr ""
+
+#: lib/elements/satin_column.py:78
+msgid "* Run Extensions > Ink/Stitch > Tools: Satin > Stroke to Satin"
+msgstr ""
+
+#: lib/elements/satin_column.py:83
 msgid "Satin has exactly two rungs"
 msgstr ""
 
-#: lib/elements/satin_column.py:82
+#: lib/elements/satin_column.py:84
 msgid "There are exactly two rungs. This may lead to false rail/rung detection."
 msgstr ""
 
-#: lib/elements/satin_column.py:90
+#: lib/elements/satin_column.py:92
 msgid "Unequal number of points"
 msgstr "Не рівна кількість точок"
 
-#: lib/elements/satin_column.py:91
+#: lib/elements/satin_column.py:93
 msgid "Satin column: There are no rungs and rails have an unequal number of points."
 msgstr ""
 
-#: lib/elements/satin_column.py:93
+#: lib/elements/satin_column.py:95
 msgid "The easiest way to solve this issue is to add one or more rungs. "
 msgstr "Простіше додати одну чи більше поперечок. "
 
-#: lib/elements/satin_column.py:94
+#: lib/elements/satin_column.py:96
 msgid "Rungs control the stitch direction in satin columns."
 msgstr "Поперечини керують нахилом стібків в сатиновій колонці."
 
-#: lib/elements/satin_column.py:96
+#: lib/elements/satin_column.py:98
 msgid "* Hold \"Shift\" while drawing the rung."
 msgstr "* Утримуючи клавішу Shift намалюйте поперечку."
 
-#: lib/elements/satin_column.py:102 lib/elements/satin_column.py:112
+#: lib/elements/satin_column.py:104 lib/elements/satin_column.py:114
 #: inx/inkstitch_select_elements.inx:31
 msgid "Satin Column"
 msgstr "Сатинова Колонка"
 
-#: lib/elements/satin_column.py:108
+#: lib/elements/satin_column.py:110
 msgid "Custom satin column"
 msgstr "Спеціальна сатинова колонка"
 
-#: lib/elements/satin_column.py:113
+#: lib/elements/satin_column.py:115
 msgid "\"E\" Stitch"
 msgstr ""
 
-#: lib/elements/satin_column.py:114
+#: lib/elements/satin_column.py:116
 msgid "\"S\" Stitch"
 msgstr ""
 
-#: lib/elements/satin_column.py:115 lib/stitch_plan/lock_stitch.py:222
+#: lib/elements/satin_column.py:117 lib/stitch_plan/lock_stitch.py:222
 msgid "Zig-zag"
 msgstr ""
 
-#: lib/elements/satin_column.py:119 lib/elements/stroke.py:72
+#: lib/elements/satin_column.py:121 lib/elements/stroke.py:72
 #: inx/inkstitch_break_apart.inx:9
 msgid "Method"
 msgstr ""
 
-#: lib/elements/satin_column.py:129
+#: lib/elements/satin_column.py:131
 msgid "Random percentage of satin width decrease"
 msgstr ""
 
-#: lib/elements/satin_column.py:130
+#: lib/elements/satin_column.py:132
 msgid "shorten stitch across rails at most this percent. Two values separated by a space may be used for an asymmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:139
+#: lib/elements/satin_column.py:141
 msgid "Random percentage of satin width increase"
 msgstr ""
 
-#: lib/elements/satin_column.py:140
+#: lib/elements/satin_column.py:142
 msgid "lengthen stitch across rails at most this percent. Two values separated by a space may be used for an asymmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:149
+#: lib/elements/satin_column.py:151
 msgid "Random zig-zag spacing percentage"
 msgstr ""
 
-#: lib/elements/satin_column.py:150
+#: lib/elements/satin_column.py:152
 msgid "Amount of random jitter added to zigzag spacing."
 msgstr ""
 
-#: lib/elements/satin_column.py:156
+#: lib/elements/satin_column.py:158
 msgid "Default"
 msgstr ""
 
-#: lib/elements/satin_column.py:157 lib/stitch_plan/lock_stitch.py:220
+#: lib/elements/satin_column.py:159 lib/stitch_plan/lock_stitch.py:220
 #: inx/inkstitch_break_apart.inx:10
 msgid "Simple"
 msgstr ""
 
-#: lib/elements/satin_column.py:158
+#: lib/elements/satin_column.py:160
 msgid "Staggered"
 msgstr ""
 
-#: lib/elements/satin_column.py:162
+#: lib/elements/satin_column.py:164
 msgid "Split Method"
 msgstr ""
 
-#: lib/elements/satin_column.py:164
+#: lib/elements/satin_column.py:166
 msgid "Display needle penetration points in simulator to see the effect of each split method."
 msgstr ""
 
-#: lib/elements/satin_column.py:173 lib/elements/satin_column.py:570
+#: lib/elements/satin_column.py:175 lib/elements/satin_column.py:572
 msgid "Maximum stitch length"
 msgstr "Максимальна довжина стібка"
 
-#: lib/elements/satin_column.py:174
+#: lib/elements/satin_column.py:176
 msgid "Maximum stitch length for split stitches."
 msgstr "Максимальна довжина стібка для роздільних стібків."
 
-#: lib/elements/satin_column.py:183
+#: lib/elements/satin_column.py:185
 msgid "Random jitter for split stitches"
 msgstr ""
 
-#: lib/elements/satin_column.py:184
+#: lib/elements/satin_column.py:186
 msgid "Randomizes split stitch length if random phase is enabled, stitch position if disabled."
 msgstr ""
 
-#: lib/elements/satin_column.py:192
+#: lib/elements/satin_column.py:194
 msgid "Random phase for split stitches"
 msgstr ""
 
-#: lib/elements/satin_column.py:193
+#: lib/elements/satin_column.py:195
 msgid "Controls whether split stitches are centered or with a random phase (which may increase stitch count)."
 msgstr ""
 
-#: lib/elements/satin_column.py:201
+#: lib/elements/satin_column.py:203
 msgid "Minimum length for random-phase split"
 msgstr ""
 
-#: lib/elements/satin_column.py:202
+#: lib/elements/satin_column.py:204
 msgid "Defaults to maximum stitch length. Smaller values allow for a transition between single-stitch and split-stitch."
 msgstr ""
 
-#: lib/elements/satin_column.py:212
+#: lib/elements/satin_column.py:214
 msgid "Stagger split stitches this many times before repeating"
 msgstr ""
 
-#: lib/elements/satin_column.py:224
+#: lib/elements/satin_column.py:226
 msgid "Short stitch inset"
 msgstr ""
 
-#: lib/elements/satin_column.py:225
+#: lib/elements/satin_column.py:227
 msgid "Stitches in areas with high density will be inset by this amount."
 msgstr ""
 
-#: lib/elements/satin_column.py:235
+#: lib/elements/satin_column.py:237
 msgid "Short stitch distance"
 msgstr ""
 
-#: lib/elements/satin_column.py:236
+#: lib/elements/satin_column.py:238
 msgid "Inset stitches if the distance between stitches is smaller than this."
 msgstr ""
 
-#: lib/elements/satin_column.py:251
+#: lib/elements/satin_column.py:253
 msgid "Peak-to-peak distance between zig-zags. This is double the mm/stitch measurement used by most mechanical machines."
 msgstr ""
 
-#: lib/elements/satin_column.py:264
+#: lib/elements/satin_column.py:266
 msgid "Additional pull compensation which varies as a percentage of stitch width. Two values separated by a space may be used for an asymmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:279
+#: lib/elements/satin_column.py:281
 msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This setting expands each pair of needle penetrations outward from the center of the satin column by a fixed length. Two values separated by a space may be used for an asymmetric effect."
 msgstr ""
 
-#: lib/elements/satin_column.py:293 lib/elements/stroke.py:340
+#: lib/elements/satin_column.py:295 lib/elements/stroke.py:340
 msgid "Automatic"
 msgstr ""
 
-#: lib/elements/satin_column.py:294 lib/elements/stroke.py:341
+#: lib/elements/satin_column.py:296 lib/elements/stroke.py:341
 msgid "Don't reverse"
 msgstr ""
 
-#: lib/elements/satin_column.py:295 lib/elements/stroke.py:342
+#: lib/elements/satin_column.py:297 lib/elements/stroke.py:342
 msgid "Reverse first rail"
 msgstr ""
 
-#: lib/elements/satin_column.py:296 lib/elements/stroke.py:343
+#: lib/elements/satin_column.py:298 lib/elements/stroke.py:343
 msgid "Reverse second rail"
 msgstr ""
 
-#: lib/elements/satin_column.py:297 lib/elements/stroke.py:344
+#: lib/elements/satin_column.py:299 lib/elements/stroke.py:344
 msgid "Reverse both rails"
 msgstr ""
 
-#: lib/elements/satin_column.py:303 lib/elements/stroke.py:350
+#: lib/elements/satin_column.py:305 lib/elements/stroke.py:350
 msgid "Reverse rails"
 msgstr ""
 
-#: lib/elements/satin_column.py:304
+#: lib/elements/satin_column.py:306
 msgid "This may help if your satin renders very strangely.  Default: automatically detect and fix a reversed rail."
 msgstr ""
 
-#: lib/elements/satin_column.py:353
+#: lib/elements/satin_column.py:355
 msgid "Swap rails"
 msgstr ""
 
-#: lib/elements/satin_column.py:354
+#: lib/elements/satin_column.py:356
 msgid "Swaps the first and second rails of the satin column, affecting which side the thread finished on as well as any sided properties"
 msgstr ""
 
-#: lib/elements/satin_column.py:365
+#: lib/elements/satin_column.py:367
 msgid "Length of stitches for start and end point connections."
 msgstr ""
 
-#: lib/elements/satin_column.py:387
+#: lib/elements/satin_column.py:389
 msgid "Running Stitch Position"
 msgstr ""
 
-#: lib/elements/satin_column.py:388
+#: lib/elements/satin_column.py:390
 #, python-format
 msgid "Position of running stitches between the rails. 0% is along the first rail, 50% is centered, 100% is along the second rail."
 msgstr ""
 
-#: lib/elements/satin_column.py:396
+#: lib/elements/satin_column.py:398
 msgid "Start at nearest point"
 msgstr ""
 
-#: lib/elements/satin_column.py:397
+#: lib/elements/satin_column.py:399
 msgid "Start at nearest point to previous element. A start position command will overwrite this setting."
 msgstr ""
 
-#: lib/elements/satin_column.py:404
+#: lib/elements/satin_column.py:406
 msgid "End at nearest point"
 msgstr ""
 
-#: lib/elements/satin_column.py:405
+#: lib/elements/satin_column.py:407
 msgid "End at nearest point to the next element. An end position command will overwrite this setting."
 msgstr ""
 
-#: lib/elements/satin_column.py:411 inx/inkstitch_fill_to_satin.inx:16
+#: lib/elements/satin_column.py:413 inx/inkstitch_fill_to_satin.inx:16
 msgid "Contour underlay"
 msgstr "Попередня прострочка контура"
 
-#: lib/elements/satin_column.py:411 lib/elements/satin_column.py:418
-#: lib/elements/satin_column.py:432 lib/elements/satin_column.py:444
-#: lib/elements/satin_column.py:459
+#: lib/elements/satin_column.py:413 lib/elements/satin_column.py:420
+#: lib/elements/satin_column.py:434 lib/elements/satin_column.py:446
+#: lib/elements/satin_column.py:461
 msgid "Contour Underlay"
 msgstr "Прострочка контура"
 
-#: lib/elements/satin_column.py:418 lib/elements/satin_column.py:475
+#: lib/elements/satin_column.py:420 lib/elements/satin_column.py:477
 #: lib/sew_stack/stitch_layers/running_stitch/running_stitch_layer.py:20
 msgid "Stitch length"
 msgstr "Довжина стібка"
 
-#: lib/elements/satin_column.py:425 lib/elements/satin_column.py:482
+#: lib/elements/satin_column.py:427 lib/elements/satin_column.py:484
 #: lib/elements/stroke.py:132
 msgid "Stitch tolerance"
 msgstr ""
 
-#: lib/elements/satin_column.py:427
+#: lib/elements/satin_column.py:429
 msgid "All stitches must be within this distance from the path. A lower tolerance means stitches will be closer together. A higher tolerance means sharp corners may be rounded. "
 msgstr ""
 
-#: lib/elements/satin_column.py:442
+#: lib/elements/satin_column.py:444
 msgid "Inset distance (fixed)"
 msgstr ""
 
-#: lib/elements/satin_column.py:443
+#: lib/elements/satin_column.py:445
 msgid "Shrink the outline by a fixed length, to prevent the underlay from showing around the outside of the satin column."
 msgstr ""
 
-#: lib/elements/satin_column.py:456
+#: lib/elements/satin_column.py:458
 msgid "Inset distance (proportional)"
 msgstr ""
 
-#: lib/elements/satin_column.py:457
+#: lib/elements/satin_column.py:459
 msgid "Shrink the outline by a proportion of the column width, to prevent the underlay from showing around the outside of the satin column."
 msgstr ""
 
-#: lib/elements/satin_column.py:468 inx/inkstitch_fill_to_satin.inx:15
+#: lib/elements/satin_column.py:470 inx/inkstitch_fill_to_satin.inx:15
 msgid "Center-walk underlay"
 msgstr "Попередня прострочка по центру"
 
-#: lib/elements/satin_column.py:468 lib/elements/satin_column.py:475
-#: lib/elements/satin_column.py:490 lib/elements/satin_column.py:503
-#: lib/elements/satin_column.py:513
+#: lib/elements/satin_column.py:470 lib/elements/satin_column.py:477
+#: lib/elements/satin_column.py:492 lib/elements/satin_column.py:505
+#: lib/elements/satin_column.py:515
 msgid "Center-Walk Underlay"
 msgstr "Прострочка по центру"
 
-#: lib/elements/satin_column.py:484
+#: lib/elements/satin_column.py:486
 msgid "All stitches must be within this distance from the path. A lower tolerance means stitches will be closer together. A higher tolerance means sharp corners may be rounded. Defaults to stitch length."
 msgstr ""
 
-#: lib/elements/satin_column.py:501
+#: lib/elements/satin_column.py:503
 msgid "For an odd number of repeats, this will reverse the direction the satin column is stitched, causing stitching to both begin and end at the start point."
 msgstr ""
 
-#: lib/elements/satin_column.py:511 lib/gui/tartan/customize_panel.py:38
+#: lib/elements/satin_column.py:513 lib/gui/tartan/customize_panel.py:38
 msgid "Position"
 msgstr ""
 
-#: lib/elements/satin_column.py:512
+#: lib/elements/satin_column.py:514
 #, python-format
 msgid "Position of underlay from between the rails. 0% is along the first rail, 50% is centered, 100% is along the second rail."
 msgstr ""
 
-#: lib/elements/satin_column.py:520 inx/inkstitch_fill_to_satin.inx:17
+#: lib/elements/satin_column.py:522 inx/inkstitch_fill_to_satin.inx:17
 msgid "Zig-zag underlay"
 msgstr "Попередня просточка зигзагом"
 
-#: lib/elements/satin_column.py:520 lib/elements/satin_column.py:529
-#: lib/elements/satin_column.py:540 lib/elements/satin_column.py:560
-#: lib/elements/satin_column.py:573
+#: lib/elements/satin_column.py:522 lib/elements/satin_column.py:531
+#: lib/elements/satin_column.py:542 lib/elements/satin_column.py:562
+#: lib/elements/satin_column.py:575
 msgid "Zig-zag Underlay"
 msgstr "Прострочка зигзагом"
 
-#: lib/elements/satin_column.py:526
+#: lib/elements/satin_column.py:528
 msgid "Zig-Zag spacing (peak-to-peak)"
 msgstr "Щільність зигзага (відстань між піками)"
 
-#: lib/elements/satin_column.py:527
+#: lib/elements/satin_column.py:529
 msgid "Distance between peaks of the zig-zags."
 msgstr "Відстань між піками зигзага."
 
-#: lib/elements/satin_column.py:537
+#: lib/elements/satin_column.py:539
 msgid "Inset amount (fixed)"
 msgstr ""
 
-#: lib/elements/satin_column.py:538 lib/elements/satin_column.py:558
+#: lib/elements/satin_column.py:540 lib/elements/satin_column.py:560
 msgid "default: half of contour underlay inset"
 msgstr "по замовчуванню: половина відступа прострочки контура"
 
-#: lib/elements/satin_column.py:557
+#: lib/elements/satin_column.py:559
 msgid "Inset amount (proportional)"
 msgstr ""
 
-#: lib/elements/satin_column.py:571
+#: lib/elements/satin_column.py:573
 msgid "Split stitch if distance of maximum stitch length is exceeded"
 msgstr ""
 
+#: lib/elements/stroke.py:34
+msgid "Too few subpaths"
+msgstr "Занадто мало ліній"
+
 #: lib/elements/stroke.py:35
 msgid "This element renders as running stitch while it has a satin column parameter."
 msgstr ""
@@ -2269,12 +2269,12 @@ msgstr ""
 msgid "* Use as satin column: add an other rail and optionally rungs."
 msgstr ""
 
-#: lib/elements/stroke.py:44 lib/extensions/params.py:607
+#: lib/elements/stroke.py:44 lib/extensions/params.py:608
 #: inx/inkstitch_select_elements.inx:12
 msgid "Stroke"
 msgstr "Лінія"
 
-#: lib/elements/stroke.py:47 lib/extensions/params.py:280
+#: lib/elements/stroke.py:47 lib/extensions/params.py:281
 msgid "Running stitch along paths"
 msgstr "Вишивка вздовж шляхів"
 
@@ -2510,6 +2510,10 @@ msgstr "* Текст: Створіть власні букви або спроб
 msgid "- Extensions > Ink/Stitch > Lettering"
 msgstr "- Розширення > Ink/Stitch > Надписи"
 
+#: lib/elements/utils/stroke_to_satin.py:96
+msgid "Ink/Stitch cannot convert your stroke into a satin column. Please break up your path and try again."
+msgstr "Ink/Stitch не може перетворити вашу лінію в сатинову колонку. Разділіть лінію і спробуйте знову."
+
 #: lib/exceptions.py:53
 msgid "Ink/Stitch experienced an unexpected error. This means it is a bug in Ink/Stitch."
 msgstr ""
@@ -2896,6 +2900,84 @@ msgstr "Будь ласка, вкажіть папку користувацьк�
 msgid "Ink/Stitch Edit JSON"
 msgstr ""
 
+#: lib/extensions/lettering_fill_composed_glyphs.py:51
+msgid "Upper Case Letters"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:52
+msgid "Lower Case Letters"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:53
+msgid "Other Letters"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:54
+msgid "Digits"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:55
+msgid "Symbols"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:56
+msgid "Punctuation"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:57
+msgid "Closing Punctuation"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:58
+msgid "Diacritics"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:59
+msgid "Special"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:133
+#, python-brace-format
+msgid "Found duplicated glyphs in font file: {duplicated_glyphs}"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:139
+msgid "No duplicated glyph found"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:193
+#, python-brace-format
+msgid "This or these glyphs have been added:\n"
+"{added_char}\n"
+"Either  fill them or delete them"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:326
+msgid "Additional Punctuation"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:401
+msgid "Simple Diacritics"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:446
+#: lib/extensions/lettering_fill_composed_glyphs.py:472
+#: lib/extensions/lettering_fill_composed_glyphs.py:497
+msgid "nothing to do, you are ready for next step"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:448
+msgid "Other Diacritics"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:474
+msgid "Two pieces letters"
+msgstr ""
+
+#: lib/extensions/lettering_fill_composed_glyphs.py:499
+msgid "Other composed letters"
+msgstr ""
+
 #: lib/extensions/lettering_font_sample.py:21
 msgid "Font Sample"
 msgstr ""
@@ -2953,57 +3035,57 @@ msgstr ""
 msgid "Thread Palette"
 msgstr "Палітра Ниток"
 
-#: lib/extensions/params.py:292
+#: lib/extensions/params.py:293
 msgid "These settings will be applied to 1 object."
 msgstr "Ці настройки буде застосовано до 1 об'єкта."
 
-#: lib/extensions/params.py:295
+#: lib/extensions/params.py:296
 #, python-format
 msgid "These settings will be applied to %d objects."
 msgstr "Ці настройки буде застосовано до %d об'єктів."
 
-#: lib/extensions/params.py:299
+#: lib/extensions/params.py:300
 msgid "Some settings had different values across objects.  Select a value from the dropdown or enter a new one."
 msgstr "Деякі параметри мають різні значення у вибраних об'єктів. Виберіть значення зі списку або введіть нове."
 
-#: lib/extensions/params.py:304
+#: lib/extensions/params.py:305
 #, python-format
 msgid "Disabling this tab will disable the following %d tabs."
 msgstr "Відключення цієї вкладки також відключить наступні %d вкладок."
 
-#: lib/extensions/params.py:308
+#: lib/extensions/params.py:309
 msgid "Disabling this tab will disable the following tab."
 msgstr "Відключення цієї вкладки також відключить наступну вкладку."
 
-#: lib/extensions/params.py:312
+#: lib/extensions/params.py:313
 #, python-format
 msgid "Enabling this tab will disable %s and vice-versa."
 msgstr "Включення цієї вкладки відключить %s і навпаки."
 
-#: lib/extensions/params.py:392
+#: lib/extensions/params.py:393
 msgid "Inkscape objects"
 msgstr "Об'єкти Inkscape"
 
-#: lib/extensions/params.py:453
+#: lib/extensions/params.py:454
 msgid "No options available"
 msgstr ""
 
-#: lib/extensions/params.py:473
+#: lib/extensions/params.py:474
 #: lib/sew_stack/stitch_layers/mixins/randomization.py:33
 msgid "Re-roll"
 msgstr ""
 
-#: lib/extensions/params.py:502
+#: lib/extensions/params.py:503
 msgid "Click to force this parameter to be saved when you click \"Apply and Quit\""
 msgstr "Натисніть тут, щоб ці параметри були збережені, коли ви натиснете \"Застосувати і Вийти\""
 
-#: lib/extensions/params.py:512
+#: lib/extensions/params.py:513
 msgid "This parameter will be saved when you click \"Apply and Quit\""
 msgstr "Ці параметри будуть збережені, коли ви натиснете \"Застосувати і Вийти\""
 
-#: lib/extensions/params.py:539 lib/extensions/sew_stack_editor.py:118
+#: lib/extensions/params.py:540 lib/extensions/sew_stack_editor.py:118
 #: lib/gui/edit_json/settings_panel.py:63 lib/gui/lettering/main_panel.py:57
-#: lib/gui/lettering_font_sample.py:69
+#: lib/gui/lettering_font_sample.py:70
 #: lib/gui/satin_multicolor/main_panel.py:54
 #: lib/gui/simulator/simulator_preferences.py:53
 #: lib/gui/tartan/main_panel.py:67 print/templates/custom-page.html:23
@@ -3013,16 +3095,16 @@ msgstr "Ці параметри будуть збережені, коли ви �
 msgid "Cancel"
 msgstr "Скасувати"
 
-#: lib/extensions/params.py:544
+#: lib/extensions/params.py:545
 msgid "Use Last Settings"
 msgstr "Використовувати останні налаштування"
 
-#: lib/extensions/params.py:547 lib/extensions/sew_stack_editor.py:122
+#: lib/extensions/params.py:548 lib/extensions/sew_stack_editor.py:122
 #: lib/gui/lettering/main_panel.py:55
 msgid "Apply and Quit"
 msgstr "Застосувати і закрити"
 
-#: lib/extensions/params.py:844 lib/extensions/sew_stack_editor.py:552
+#: lib/extensions/params.py:845 lib/extensions/sew_stack_editor.py:552
 msgid "Embroidery Params"
 msgstr "Параметри вишивки"
 
@@ -3148,20 +3230,16 @@ msgstr ""
 msgid "Cannot convert a satin column into a live path effect satin. Please select a stroke."
 msgstr ""
 
-#: lib/extensions/stroke_to_satin.py:36
+#: lib/extensions/stroke_to_satin.py:27
 msgid "Please select at least one line to convert to a satin column."
 msgstr "Виберіть хоча б одну лінію для її конвертації в сатинову колонку."
 
-#. : Convert To Satin extension, user selected one or more objects that were
-#. not lines.
-#: lib/extensions/stroke_to_satin.py:41
+#. : Convert To Satin extension, user selected only objects that were not
+#. lines.
+#: lib/extensions/stroke_to_satin.py:59
 msgid "Only simple lines may be converted to satin columns."
 msgstr "В сатинову колонку можна перетворити тільки прості линії."
 
-#: lib/extensions/stroke_to_satin.py:153
-msgid "Ink/Stitch cannot convert your stroke into a satin column. Please break up your path and try again."
-msgstr "Ink/Stitch не може перетворити вашу лінію в сатинову колонку. Разділіть лінію і спробуйте знову."
-
 #: lib/extensions/tartan.py:66
 msgid "To create a tartan pattern please select at least one element with a fill color."
 msgstr ""
@@ -3279,7 +3357,7 @@ msgstr "список ниток"
 
 #: lib/gui/abort_message.py:38 lib/gui/apply_palette.py:64
 #: lib/gui/edit_json/help_panel.py:27 lib/gui/element_info.py:57
-#: lib/gui/lettering_font_sample.py:97
+#: lib/gui/lettering_font_sample.py:98
 #: lib/gui/satin_multicolor/help_panel.py:27 lib/gui/tartan/help_panel.py:27
 msgid "More information on our website:"
 msgstr ""
@@ -3313,7 +3391,7 @@ msgid "Select color palette"
 msgstr ""
 
 #: lib/gui/apply_palette.py:44 lib/gui/edit_json/settings_panel.py:65
-#: lib/gui/lettering_font_sample.py:71
+#: lib/gui/lettering_font_sample.py:72
 #: lib/gui/satin_multicolor/main_panel.py:56
 #: lib/gui/simulator/simulator_preferences.py:55
 #: lib/gui/tartan/main_panel.py:69 lib/gui/test_swatches.py:117
@@ -3322,7 +3400,7 @@ msgstr ""
 
 #: lib/gui/apply_palette.py:49 lib/gui/edit_json/main_panel.py:75
 #: lib/gui/element_info.py:42 lib/gui/lettering/main_panel.py:47
-#: lib/gui/lettering_font_sample.py:82
+#: lib/gui/lettering_font_sample.py:83
 #: lib/gui/satin_multicolor/main_panel.py:51 lib/gui/tartan/main_panel.py:64
 #: lib/gui/test_swatches.py:83 inx/inkstitch_apply_threadlist.inx:89
 #: inx/inkstitch_auto_run.inx:25 inx/inkstitch_auto_satin.inx:16
@@ -3336,6 +3414,7 @@ msgstr ""
 #: inx/inkstitch_knockdown_fill.inx:43
 #: inx/inkstitch_lettering_along_path.inx:25
 #: inx/inkstitch_lettering_custom_font_dir.inx:11
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:27
 #: inx/inkstitch_lettering_force_lock_stitches.inx:22
 #: inx/inkstitch_lettering_generate_json.inx:144
 #: inx/inkstitch_lettering_remove_kerning.inx:12
@@ -3665,45 +3744,45 @@ msgstr ""
 msgid "Scale"
 msgstr "Масштаб"
 
-#: lib/gui/lettering_font_sample.py:24
+#: lib/gui/lettering_font_sample.py:25
 #: inx/inkstitch_lettering_font_sample.inx:3
 msgid "Font Sampling"
 msgstr ""
 
-#: lib/gui/edit_json/main_panel.py:74 lib/gui/lettering_font_sample.py:39
+#: lib/gui/edit_json/main_panel.py:74 lib/gui/lettering_font_sample.py:40
 #: lib/gui/simulator/view_panel.py:129 print/templates/ui.html:5
 #: print/templates/ui.html:15 inx/inkstitch_lettering_generate_json.inx:78
 #: inx/inkstitch_png_realistic.inx:14 inx/inkstitch_png_simple.inx:14
 msgid "Settings"
 msgstr "Налаштування"
 
-#: lib/gui/lettering_font_sample.py:50
+#: lib/gui/lettering_font_sample.py:51
 msgid "Stitch direction"
 msgstr ""
 
-#: lib/gui/lettering_font_sample.py:52 lib/gui/tartan/customize_panel.py:46
+#: lib/gui/lettering_font_sample.py:53 lib/gui/tartan/customize_panel.py:46
 #: inx/inkstitch_batch_lettering.inx:21
 msgid "Scale (%)"
 msgstr ""
 
-#: lib/gui/lettering_font_sample.py:54
+#: lib/gui/lettering_font_sample.py:55
 msgid "Max. line width"
 msgstr ""
 
 #: lib/gui/lettering/option_panel.py:94 lib/gui/lettering/option_panel.py:96
-#: lib/gui/lettering_font_sample.py:56 inx/inkstitch_batch_lettering.inx:22
+#: lib/gui/lettering_font_sample.py:57 inx/inkstitch_batch_lettering.inx:22
 msgid "Color sort"
 msgstr ""
 
-#: lib/gui/lettering_font_sample.py:89
+#: lib/gui/lettering_font_sample.py:90
 msgid "    This extension helps font creators to generate an output of every glyph from a selected font."
 msgstr ""
 
-#: lib/gui/lettering_font_sample.py:103 lib/gui/lettering_font_sample.py:104
+#: lib/gui/lettering_font_sample.py:104 lib/gui/lettering_font_sample.py:105
 msgid "https://inkstitch.org/docs/font-tools/#font-sampling"
 msgstr ""
 
-#: lib/gui/lettering_font_sample.py:222
+#: lib/gui/lettering_font_sample.py:226
 #, python-brace-format
 msgid "The glyphlist for this font seems to be outdated.\n\n"
 "Please update the glyph list for {font_name}:\n"
@@ -4248,6 +4327,7 @@ msgstr ""
 #: inx/inkstitch_knockdown_fill.inx:17
 #: inx/inkstitch_lettering_along_path.inx:17
 #: inx/inkstitch_lettering_custom_font_dir.inx:8
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:8
 #: inx/inkstitch_lettering_force_lock_stitches.inx:8
 #: inx/inkstitch_lettering_remove_kerning.inx:9
 #: inx/inkstitch_lettering_set_color_sort_index.inx:8
@@ -4295,6 +4375,7 @@ msgstr ""
 #: lib/gui/test_swatches.py:100 inx/inkstitch_apply_threadlist.inx:100
 #: inx/inkstitch_fill_to_stroke.inx:33 inx/inkstitch_jump_to_stroke.inx:44
 #: inx/inkstitch_jump_to_trim.inx:29
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:30
 #: inx/inkstitch_remove_embroidery_settings.inx:143
 #: inx/inkstitch_stroke_to_lpe_satin.inx:32
 #: inx/inkstitch_zigzag_line_to_satin.inx:28
@@ -6830,6 +6911,7 @@ msgstr ""
 
 #: inx/inkstitch_lettering_custom_font_dir.inx:27
 #: inx/inkstitch_lettering_edit_json.inx:12
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:42
 #: inx/inkstitch_lettering_font_sample.inx:12
 #: inx/inkstitch_lettering_force_lock_stitches.inx:44
 #: inx/inkstitch_lettering_generate_json.inx:12
@@ -6848,6 +6930,66 @@ msgstr ""
 msgid "Feature to verify or update the font information file for an existing font"
 msgstr ""
 
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:3
+msgid "Fill Composed Glyphs"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:12
+msgid "Choose action"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:13
+msgid "Step 1 : Comma and period and hyphen"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:14
+msgid "Step 2 : Undecomposable Letters"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:15
+msgid "Step 3 : Digits, Symbols and Opening Punctuation"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:16
+msgid "Step 4 : Closing Punctuation"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:17
+msgid "Step 5 : First diacritics"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:18
+msgid "Step 6 : All diacritics"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:19
+msgid "Step 7 : Two pieces Letters"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:20
+msgid "Step 8 : Other Composed Letters"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:21
+msgid "Check duplicate GlyphLayers"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:22
+msgid "Sort by Category"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:28
+msgid "This extension helps the font digitizer to organize its work in steps to maximize reuse of already digitized letters."
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:31
+msgid "https://inkstitch.org/docs/font-tools/#fill_composed_glyphs"
+msgstr ""
+
+#: inx/inkstitch_lettering_fill_composed_glyphs.inx:39
+msgid "Help with composed glyphs like é,ç or ï"
+msgstr ""
+
 #: inx/inkstitch_lettering_font_sample.inx:9
 msgid "Inserts all glyphs of a specified font into the document"
 msgstr ""