diff options
Diffstat (limited to 'templates/output_params_gcode.xml')
| -rw-r--r-- | templates/output_params_gcode.xml | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/templates/output_params_gcode.xml b/templates/output_params_gcode.xml new file mode 100644 index 00000000..97e6cacf --- /dev/null +++ b/templates/output_params_gcode.xml @@ -0,0 +1,39 @@ + {# these parameters are for g-code files (*.txt) #} +<param type="notebook" name="gcode-settings"> + <page name="embroidery" gui-text="Coordinate Settings"> + <param name="flip_x" type="boolean" gui-text="negate X coordinate values" gui-description="Negate x coordinates">false</param> + <param name="flip_y" type="boolean" gui-text="negate Y coordinate values" gui-description="Negate y coordinates">false</param> + <param type="optiongroup" name="alternate_z" gui-text="Z coordinate value" gui-description="Either alternate Z value between 0 and 1 or travel custom value."> + <option value="true">alternate Z value</option> + <option value="false">Z travel per stitch</option> + </param> + <param name="stitch_z_travel" type="float" gui-text="Z travel per stitch" + gui-description='increment z coordinate by this amount per stitch if "Z travel per stitch" is enabled' min="0" max="999">5.0</param> + </page> + <page name="custom-commands" gui-text="Custom Commands"> + <param name="custom_stitch" type="string" appearance="multiline" gui-text="STITCH" + gui-description="Use '%X' for x-coordinate. Use '%Y' for y-coordinate and '%Z' for z-coordinate."></param> + <param name="custom_color_change" type="string" appearance="multiline" gui-text="COLOR CHANGE" + gui-description="Leave empty to use default value. Use 'none' to remove."></param> + <param name="custom_stop" type="string" appearance="multiline" gui-text="STOP" + gui-description="Leave empty to use default value. Use 'none' to remove."></param> + <param name="custom_start" type="string" appearance="multiline" gui-text="START"></param> + <param name="custom_end" type="string" appearance="multiline" gui-text="END"></param> + </page> + <page name="laser" gui-text="Laser Settings"> + <param name="laser_mode" type="boolean" gui-text="laser mode" + gui-description="Laser mode (generate g-code for grbl laser mode)">false</param> + <param name="dynamic_laser_power" type="boolean" gui-text="dynamic laser power" + gui-description="Use Grbl's M4 dynamic laser power mode. Ensures consistent laser cutting power regardless of motor speed. Only for PWM-capable lasers." + min="0.0" max="5.0">true</param> + <param name="laser_warm_up_time" type="float" gui-text="laser warm-up time" + gui-description="When turning on the laser, wait this many seconds for laser to warm up (G4 command)">0.0</param> + <param name="spindle_speed" type="int" gui-text="spindle speed" + gui-description="spindle speed (laser power for laser mode, set to -1 to omit)" min="-1" max="1000000000">-1</param> + <param name="min_spindle_speed" type="int" gui-text="min spindle speed" + gui-description="minimum spindle speed value (grbl $31 setting)" min="-1" max="1000000000">-1</param> + <param name="max_spindle_speed" type="int" gui-text="max spindle speed" + gui-description="minimum spindle speed value (grbl $30 setting)" min="-1" max="1000000000">-1</param> + <param name="feed_rate" type="int" gui-text="feed rate (in mm/min, set to -1 to omit)" min="-1" max="1000000000">-1</param> + </page> +</param> |