diff options
Diffstat (limited to 'templates')
| -rw-r--r-- | templates/output_params_txt.xml | 30 |
1 files changed, 20 insertions, 10 deletions
diff --git a/templates/output_params_txt.xml b/templates/output_params_txt.xml index 451a6ca9..22bf3594 100644 --- a/templates/output_params_txt.xml +++ b/templates/output_params_txt.xml @@ -1,11 +1,21 @@ {# these parameters are for g-code files (*.txt) #} - <param name="laser_mode" type="boolean" gui-text="{{ _("laser mode") }}" gui-description="{{ _("Laser mode (generate g-code for grbl laser mode)") }}">false</param> - <param name="dynamic_laser_power" type="boolean" gui-text="{{ _("dynamic laser power") }}" gui-description="{{ _("Use Grbl's M4 dynamic laser power mode. Ensures consistent laser cutting power regardless of motor speed. Only for PWM-capable lasers.") }}" min="0.0" max="5.0">true</param> - <param name="laser_warm_up_time" type="float" gui-text="{{ _("laser warm-up time") }}" gui-description="{{ _("When turning on the laser, wait this many seconds for laser to warm up (G4 command)") }}">0.0</param> - <param name="flip_x" type="boolean" gui-text="{{ _("negate X coordinate values") }}" gui-description="{{ _("Negate x coordinates") }}">false</param> - <param name="flip_y" type="boolean" gui-text="{{ _("negate Y coordinate values") }}" gui-description="{{ _("Negate y coordinates") }}">false</param> - <param name="stitch_z_travel" type="float" gui-text="{{ _("Z travel per stitch") }}" gui-description="{{ _("increment z coordinate by this amount per stitch") }}">5.0</param> - <param name="spindle_speed" type="int" gui-text="{{ _("spindle speed") }}" gui-description="{{ _("spindle speed (laser power for laser mode, set to -1 to omit)") }}" min="-1" max="1000000000">-1</param> - <param name="min_spindle_speed" type="int" gui-text="{{ _("min spindle speed") }}" gui-description="{{ _("minimum spindle speed value (grbl $31 setting)") }}" min="-1" max="1000000000">-1</param> - <param name="max_spindle_speed" type="int" gui-text="{{ _("max spindle speed") }}" gui-description="{{ _("minimum spindle speed value (grbl $30 setting)") }}" min="-1" max="1000000000">-1</param> - <param name="feed_rate" type="int" gui-description="{{ _("feed rate (in mm/min, set to -1 to omit)")}}" min="-1" max="1000000000">-1</param>
\ No newline at end of file +<param type="notebook" name="gcode-settings"> + <page name="embroidery" gui-text="Coordinate Settings"> + <param name="flip_x" type="boolean" gui-text="{{ _("negate X coordinate values") }}" gui-description="{{ _("Negate x coordinates") }}">false</param> + <param name="flip_y" type="boolean" gui-text="{{ _("negate Y coordinate values") }}" gui-description="{{ _("Negate y coordinates") }}">false</param> + <param type="optiongroup" name="alternate_z" gui-text="{{ _("Z coordinate value") }}" gui-description="{{ _("Either alternate Z value between 0 and 1 or travel custom value.") }}"> + <option value="true">{{ _("alternate Z value") }}</option> + <option value="false">{{ _("Z travel per stitch") }}</option> + </param> + <param name="stitch_z_travel" type="float" gui-text="{{ _("Z travel per stitch") }}" gui-description="{{ _('increment z coordinate by this amount per stitch if "Z travel per stitch" is enabled') }}">5.0</param> + </page> + <page name="laser" gui-text="Laser Settings"> + <param name="laser_mode" type="boolean" gui-text="{{ _("laser mode") }}" gui-description="{{ _("Laser mode (generate g-code for grbl laser mode)") }}">false</param> + <param name="dynamic_laser_power" type="boolean" gui-text="{{ _("dynamic laser power") }}" gui-description="{{ _("Use Grbl's M4 dynamic laser power mode. Ensures consistent laser cutting power regardless of motor speed. Only for PWM-capable lasers.") }}" min="0.0" max="5.0">true</param> + <param name="laser_warm_up_time" type="float" gui-text="{{ _("laser warm-up time") }}" gui-description="{{ _("When turning on the laser, wait this many seconds for laser to warm up (G4 command)") }}">0.0</param> + <param name="spindle_speed" type="int" gui-text="{{ _("spindle speed") }}" gui-description="{{ _("spindle speed (laser power for laser mode, set to -1 to omit)") }}" min="-1" max="1000000000">-1</param> + <param name="min_spindle_speed" type="int" gui-text="{{ _("min spindle speed") }}" gui-description="{{ _("minimum spindle speed value (grbl $31 setting)") }}" min="-1" max="1000000000">-1</param> + <param name="max_spindle_speed" type="int" gui-text="{{ _("max spindle speed") }}" gui-description="{{ _("minimum spindle speed value (grbl $30 setting)") }}" min="-1" max="1000000000">-1</param> + <param name="feed_rate" type="int" gui-description="{{ _("feed rate (in mm/min, set to -1 to omit)")}}" min="-1" max="1000000000">-1</param> + </page> +</param> |