diff options
Diffstat (limited to 'translations/messages_nl_NL.po')
| -rw-r--r-- | translations/messages_nl_NL.po | 586 |
1 files changed, 364 insertions, 222 deletions
diff --git a/translations/messages_nl_NL.po b/translations/messages_nl_NL.po index 9b86d739..1c9ce63b 100644 --- a/translations/messages_nl_NL.po +++ b/translations/messages_nl_NL.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2025-07-08 01:52+0000\n" -"PO-Revision-Date: 2025-07-08 01:52\n" +"POT-Creation-Date: 2025-07-20 02:08+0000\n" +"PO-Revision-Date: 2025-07-20 02:08\n" "Last-Translator: \n" "Language-Team: Dutch\n" "MIME-Version: 1.0\n" @@ -12,7 +12,7 @@ msgstr "" "Generated-By: Babel 2.17.0\n" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-07-08 01:52+0000\n" +"POT-Creation-Date: 2025-07-20 02:07+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: \n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -1111,126 +1111,126 @@ msgstr "" msgid "Flip automatically calculated angle if it appears to be wrong." msgstr "" -#: lib/elements/element.py:251 lib/gui/preferences.py:59 +#: lib/elements/element.py:274 lib/gui/preferences.py:59 #: lib/gui/preferences.py:128 msgid "Minimum stitch length" msgstr "" -#: lib/elements/element.py:252 +#: lib/elements/element.py:275 msgid "Overwrite global minimum stitch length setting. Shorter stitches than that will be removed." msgstr "" -#: lib/elements/element.py:262 lib/gui/preferences.py:41 +#: lib/elements/element.py:285 lib/gui/preferences.py:41 msgid "Minimum jump stitch length" msgstr "" -#: lib/elements/element.py:263 +#: lib/elements/element.py:286 msgid "Overwrite global minimum jump stitch length setting. Shorter distances to the next object will have no lock stitches." msgstr "" -#: lib/elements/element.py:273 +#: lib/elements/element.py:296 msgid "Allow lock stitches" msgstr "Sta locksteken toe" -#: lib/elements/element.py:274 +#: lib/elements/element.py:297 msgid "Tie thread at the beginning and/or end of this object. Manual stitch will only add lock stitches if force lock stitched is checked." msgstr "" #. options to allow lock stitch before and after objects -#: lib/elements/element.py:279 +#: lib/elements/element.py:302 msgid "Both" msgstr "Beide" -#: lib/elements/element.py:279 +#: lib/elements/element.py:302 msgid "Before" msgstr "Voor" -#: lib/elements/element.py:279 +#: lib/elements/element.py:302 msgid "After" msgstr "Na" -#: lib/elements/element.py:279 +#: lib/elements/element.py:302 msgid "Neither" msgstr "Geen" -#: lib/elements/element.py:288 +#: lib/elements/element.py:311 #: inx/inkstitch_lettering_force_lock_stitches.inx:3 msgid "Force lock stitches" msgstr "Force locksteken" -#: lib/elements/element.py:289 +#: lib/elements/element.py:312 msgid "Sew lock stitches after sewing this element, even if the distance to the next object is shorter than defined by the minimum jump stitch length value in the Ink/Stitch preferences." msgstr "" -#: lib/elements/element.py:301 +#: lib/elements/element.py:324 msgid "Tack stitch" msgstr "" -#: lib/elements/element.py:302 +#: lib/elements/element.py:325 msgid "Tack down stitch type" msgstr "" -#: lib/elements/element.py:312 lib/elements/element.py:358 +#: lib/elements/element.py:335 lib/elements/element.py:381 msgid "Custom path" msgstr "" -#: lib/elements/element.py:313 +#: lib/elements/element.py:336 msgid "Enter a custom path. For svg paths The last node will not be embroidered, but represents the first stitch of the element." msgstr "" -#: lib/elements/element.py:323 lib/elements/element.py:335 +#: lib/elements/element.py:346 lib/elements/element.py:358 msgid "Scale tack stitch" msgstr "" -#: lib/elements/element.py:324 +#: lib/elements/element.py:347 msgid "Set stitch length. A 1 in a custom path equals this values." msgstr "" -#: lib/elements/element.py:336 +#: lib/elements/element.py:359 msgid "Scale tack stitch by this percentage." msgstr "" -#: lib/elements/element.py:347 +#: lib/elements/element.py:370 msgid "Lock stitch" msgstr "" -#: lib/elements/element.py:348 +#: lib/elements/element.py:371 msgid "Lock stitch type" msgstr "" -#: lib/elements/element.py:359 +#: lib/elements/element.py:382 msgid "Enter a custom path. For svg paths the first node will not be embroidered, but represents the last stitch of the element." msgstr "" -#: lib/elements/element.py:369 lib/elements/element.py:381 +#: lib/elements/element.py:392 lib/elements/element.py:404 msgid "Scale lock stitch" msgstr "" -#: lib/elements/element.py:370 +#: lib/elements/element.py:393 msgid "Set length of lock stitches (mm)." msgstr "" -#: lib/elements/element.py:382 +#: lib/elements/element.py:405 msgid "Scale lock stitch by this percentage." msgstr "" -#: lib/elements/element.py:394 +#: lib/elements/element.py:417 msgid "Trim After" msgstr "" -#: lib/elements/element.py:395 +#: lib/elements/element.py:418 msgid "Add a TRIM command after stitching this object." msgstr "" -#: lib/elements/element.py:404 +#: lib/elements/element.py:427 msgid "Stop After" msgstr "" -#: lib/elements/element.py:405 +#: lib/elements/element.py:428 msgid "Add a STOP command after stitching this object." msgstr "" -#: lib/elements/element.py:704 +#: lib/elements/element.py:727 msgid "Please run Extensions > Ink/Stitch > Troubleshoot > Troubleshoot objects. This will show you the exact location of the problem." msgstr "" @@ -1262,7 +1262,7 @@ msgstr "Uitbreiden" msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead." msgstr "De parameter Uitbreiden voor dit opvulobject kan niet worden toegepast. Ink/Stitch zal deze negeren en in plaats daarvan de oorspronkelijke grootte gebruiken." -#: lib/elements/fill_stitch.py:49 lib/elements/fill_stitch.py:700 +#: lib/elements/fill_stitch.py:49 lib/elements/fill_stitch.py:698 msgid "Inset" msgstr "Inzet" @@ -1590,15 +1590,15 @@ msgstr "" msgid "Stagger rows this many times before repeating" msgstr "Spring rijen zoveel keer in voordat herhaald wordt" -#: lib/elements/fill_stitch.py:372 lib/elements/satin_column.py:215 +#: lib/elements/fill_stitch.py:372 lib/elements/satin_column.py:217 msgid "Length of the cycle by which successive stitch rows are staggered. Fractional values are allowed and can have less visible diagonals than integer values." msgstr "" -#: lib/elements/fill_stitch.py:388 lib/elements/fill_stitch.py:712 +#: lib/elements/fill_stitch.py:388 lib/elements/fill_stitch.py:710 msgid "Skip last stitch in each row" msgstr "Sla de laatste steek in elke rij over" -#: lib/elements/fill_stitch.py:389 lib/elements/fill_stitch.py:713 +#: lib/elements/fill_stitch.py:389 lib/elements/fill_stitch.py:711 msgid "The last stitch in each row is quite close to the first stitch in the next row. Skipping it decreases stitch count and density." msgstr "De laatste steek in elke rij is vrij dicht op de eerste steek in de volgende rij. Door deze over te slaan wordt de dichtheid en het aantal steken verkleind." @@ -1626,15 +1626,15 @@ msgstr "" msgid "If this option is disabled, the ending point will only be used to define a general direction for stitch routing. When enabled the last section will end at the defined spot." msgstr "" -#: lib/elements/fill_stitch.py:442 lib/elements/fill_stitch.py:724 +#: lib/elements/fill_stitch.py:442 lib/elements/fill_stitch.py:722 msgid "Underpath" msgstr "Onderpad" -#: lib/elements/fill_stitch.py:443 lib/elements/fill_stitch.py:725 +#: lib/elements/fill_stitch.py:443 lib/elements/fill_stitch.py:723 msgid "Travel inside the shape when moving from section to section. Underpath stitches avoid traveling in the direction of the row angle so that they are not visible. This gives them a jagged appearance." msgstr "Beweeg binnen de vorm bij verplaatsen tussen secties. Onderpad steken vermijden de richting van de rijhoek zodat ze niet zichtbaar zijn. Dit geeft ze een gekarteld uiterlijk." -#: lib/elements/fill_stitch.py:455 lib/elements/satin_column.py:364 +#: lib/elements/fill_stitch.py:455 lib/elements/satin_column.py:366 #: lib/elements/stroke.py:120 msgid "Running stitch length" msgstr "Doorlopende steek lengte" @@ -1643,11 +1643,11 @@ msgstr "Doorlopende steek lengte" msgid "Length of stitches around the outline of the fill region used when moving from section to section. Also used for meander and circular fill." msgstr "" -#: lib/elements/fill_stitch.py:473 lib/elements/satin_column.py:375 +#: lib/elements/fill_stitch.py:473 lib/elements/satin_column.py:377 msgid "Running stitch tolerance" msgstr "Tolerantie lopende steek" -#: lib/elements/fill_stitch.py:474 lib/elements/satin_column.py:376 +#: lib/elements/fill_stitch.py:474 lib/elements/satin_column.py:378 msgid "Determines how hard Ink/Stitch tries to avoid stitching outside the shape.Lower numbers are less likely to stitch outside the shape but require more stitches." msgstr "" @@ -1667,7 +1667,7 @@ msgstr "" msgid "Amount to vary the length of each stitch by when randomizing." msgstr "" -#: lib/elements/fill_stitch.py:525 lib/elements/satin_column.py:500 +#: lib/elements/fill_stitch.py:525 lib/elements/satin_column.py:502 #: lib/elements/stroke.py:82 #: lib/sew_stack/stitch_layers/running_stitch/running_stitch_layer.py:33 #: lib/sew_stack/stitch_layers/running_stitch/running_stitch_layer.py:35 @@ -1688,7 +1688,7 @@ msgid "Backtrack each stitch this many times. A value of 1 would triple each st "A pattern with various repeats can be created with a list of values separated by a space." msgstr "" -#: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:250 +#: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:252 #: lib/elements/stroke.py:185 msgid "Zig-zag spacing (peak-to-peak)" msgstr "Zig-zag afstand (piek-naar-piek)" @@ -1721,7 +1721,7 @@ msgstr "" msgid "Defines width of a herringbone pattern. Use 0 for regular rows." msgstr "" -#: lib/elements/fill_stitch.py:605 lib/elements/satin_column.py:278 +#: lib/elements/fill_stitch.py:605 lib/elements/satin_column.py:280 #: lib/elements/stroke.py:198 msgid "Pull compensation" msgstr "Trek compensatie" @@ -1730,13 +1730,13 @@ msgstr "Trek compensatie" msgid "Fill stitch can pull the fabric together, resulting in a shape narrower than you draw in Inkscape. This setting expands each row of stitches outward from the center of the row by a fixed length. Two values separated by a space may be used for an asymmetric effect." msgstr "" -#: lib/elements/fill_stitch.py:610 lib/elements/satin_column.py:282 -#: lib/elements/satin_column.py:445 lib/elements/satin_column.py:539 +#: lib/elements/fill_stitch.py:610 lib/elements/satin_column.py:284 +#: lib/elements/satin_column.py:447 lib/elements/satin_column.py:541 #: lib/elements/stroke.py:201 msgid "mm (each side)" msgstr "" -#: lib/elements/fill_stitch.py:621 lib/elements/satin_column.py:263 +#: lib/elements/fill_stitch.py:621 lib/elements/satin_column.py:265 msgid "Pull compensation percentage" msgstr "" @@ -1744,61 +1744,61 @@ msgstr "" msgid "Additional pull compensation which varies as a percentage of row width. Two values separated by a space may be used for an asymmetric effect." msgstr "" -#: lib/elements/fill_stitch.py:625 lib/elements/satin_column.py:132 -#: lib/elements/satin_column.py:142 lib/elements/satin_column.py:266 -#: lib/elements/satin_column.py:460 lib/elements/satin_column.py:559 +#: lib/elements/fill_stitch.py:625 lib/elements/satin_column.py:134 +#: lib/elements/satin_column.py:144 lib/elements/satin_column.py:268 +#: lib/elements/satin_column.py:462 lib/elements/satin_column.py:561 msgid "% (each side)" msgstr "" -#: lib/elements/fill_stitch.py:646 lib/elements/fill_stitch.py:655 -#: lib/elements/fill_stitch.py:682 lib/elements/fill_stitch.py:693 -#: lib/elements/fill_stitch.py:703 lib/elements/fill_stitch.py:715 -#: lib/elements/fill_stitch.py:728 +#: lib/elements/fill_stitch.py:644 lib/elements/fill_stitch.py:653 +#: lib/elements/fill_stitch.py:680 lib/elements/fill_stitch.py:691 +#: lib/elements/fill_stitch.py:701 lib/elements/fill_stitch.py:713 +#: lib/elements/fill_stitch.py:726 msgid "Fill Underlay" msgstr "Vulling onderlaag" -#: lib/elements/fill_stitch.py:646 lib/gui/tartan/embroidery_panel.py:55 +#: lib/elements/fill_stitch.py:644 lib/gui/tartan/embroidery_panel.py:55 #: inx/inkstitch_select_elements.inx:36 inx/inkstitch_select_elements.inx:64 #: inx/inkstitch_select_elements.inx:66 msgid "Underlay" msgstr "Versteviging" -#: lib/elements/fill_stitch.py:652 +#: lib/elements/fill_stitch.py:650 msgid "Fill angle" msgstr "Opvul hoek" -#: lib/elements/fill_stitch.py:653 +#: lib/elements/fill_stitch.py:651 msgid "Default: fill angle + 90 deg. Insert a list for multiple layers separated by a space." msgstr "" -#: lib/elements/fill_stitch.py:679 lib/gui/tartan/embroidery_panel.py:77 +#: lib/elements/fill_stitch.py:677 lib/gui/tartan/embroidery_panel.py:77 msgid "Row spacing" msgstr "Opvulrij afstand" -#: lib/elements/fill_stitch.py:680 +#: lib/elements/fill_stitch.py:678 msgid "default: 3x fill row spacing" msgstr "standaard: 3x opvulrij afstand" -#: lib/elements/fill_stitch.py:690 lib/elements/stroke.py:171 +#: lib/elements/fill_stitch.py:688 lib/elements/stroke.py:171 #: lib/extensions/element_info.py:144 lib/extensions/element_info.py:203 msgid "Max stitch length" msgstr "Max steek lengte" -#: lib/elements/fill_stitch.py:691 +#: lib/elements/fill_stitch.py:689 msgid "default: equal to fill max stitch length" msgstr "standaard: gelijk aan max steek lengte" -#: lib/elements/fill_stitch.py:701 +#: lib/elements/fill_stitch.py:699 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill." msgstr "Verklein de vorm van de versteviging om te voorkomen dat de versteviging zichtbaar is aan de buitenkant van de opvulling." -#: lib/elements/fill_stitch.py:736 lib/elements/satin_column.py:581 +#: lib/elements/fill_stitch.py:734 lib/elements/satin_column.py:583 #: lib/elements/stroke.py:450 lib/gui/satin_multicolor/colorize_panel.py:61 #: lib/sew_stack/stitch_layers/mixins/randomization.py:59 msgid "Random seed" msgstr "" -#: lib/elements/fill_stitch.py:737 lib/elements/satin_column.py:582 +#: lib/elements/fill_stitch.py:735 lib/elements/satin_column.py:584 #: lib/elements/stroke.py:451 msgid "Use a specific seed for randomized attributes. Uses the element ID if empty." msgstr "" @@ -1843,420 +1843,420 @@ msgstr "* Ga naar de Lijnstijl tab" msgid "* Under \"Markers\" choose the first (empty) option in the first dropdown list." msgstr "* Kies onder \"Markers\" de eerste (lege) optie in de eerste dropdown lijst." -#: lib/elements/satin_column.py:32 lib/elements/stroke.py:34 -msgid "Too few subpaths" -msgstr "Te weinig subpaden" - -#: lib/elements/satin_column.py:33 -msgid "Satin column: Object has too few subpaths. A satin column should have at least two subpaths (the rails)." -msgstr "Satijnbaan: Object heeft te weinig subpaden. Een Satijnbaan moet minstens twee subpaden hebben (de rails)." - -#: lib/elements/satin_column.py:35 -msgid "* Add another subpath (select two rails and do Path > Combine)" -msgstr "* Voeg nog een subpad toe (selecteer twee rails en kies Pad > Combineer)" - -#: lib/elements/satin_column.py:36 -msgid "* Convert to running stitch or simple satin (Params extension)" -msgstr "* Zet om naar een doorlopende steek of simpele Satijnsteek (via Params)" - -#: lib/elements/satin_column.py:41 +#: lib/elements/satin_column.py:34 msgid "Not stitchable satin column" msgstr "Niet te stikken satijnen kolom" -#: lib/elements/satin_column.py:42 +#: lib/elements/satin_column.py:35 msgid "A satin column consists out of two rails and one or more rungs. This satin column may have a different setup." msgstr "Een satijnzuil bestaat uit twee rails en één of meer sporten. Deze satijnkolom kan een andere opstelling hebben." -#: lib/elements/satin_column.py:44 +#: lib/elements/satin_column.py:37 msgid "Make sure your satin column is not a combination of multiple satin columns." msgstr "Zorg ervoor dat uw satijnen kolom niet een combinatie is van meerdere satijnen kolommen." -#: lib/elements/satin_column.py:45 +#: lib/elements/satin_column.py:38 msgid "Go to our website and read how a satin column should look like https://inkstitch.org/docs/stitches/satin-column/" msgstr "Ga naar onze website en lees hoe een satijnen kolom eruit moet zien https://inkstitch.org/docs/stitches/satin-column/" -#: lib/elements/satin_column.py:49 +#: lib/elements/satin_column.py:42 msgid "Each rung should intersect both rails once." msgstr "Elke sport moet beide rails eenmaal doorkruisen." -#: lib/elements/satin_column.py:53 +#: lib/elements/satin_column.py:46 msgid "Rail is a closed path" msgstr "" -#: lib/elements/satin_column.py:54 +#: lib/elements/satin_column.py:47 msgid "Rail is a closed path without a definite starting and ending point." msgstr "" -#: lib/elements/satin_column.py:56 +#: lib/elements/satin_column.py:49 msgid "* Select the node where you want the satin to start." msgstr "" -#: lib/elements/satin_column.py:57 +#: lib/elements/satin_column.py:50 msgid "* Click on: Break path at selected nodes." msgstr "" -#: lib/elements/satin_column.py:62 +#: lib/elements/satin_column.py:55 msgid "Rung doesn't intersect rails" msgstr "Sport doorkruist de rails niet" -#: lib/elements/satin_column.py:63 +#: lib/elements/satin_column.py:56 msgid "Satin column: A rung doesn't intersect both rails." msgstr "Satijnbaan: een sport doorkruist niet beide rails." -#: lib/elements/satin_column.py:67 +#: lib/elements/satin_column.py:60 msgid "Satin has no rungs" msgstr "Satijnbaan heeft geen sporten" -#: lib/elements/satin_column.py:68 +#: lib/elements/satin_column.py:61 msgid "Rungs control the stitch direction in satin columns. It is best pratice to use them." msgstr "" -#: lib/elements/satin_column.py:70 lib/elements/satin_column.py:84 -#: lib/elements/satin_column.py:95 +#: lib/elements/satin_column.py:63 lib/elements/satin_column.py:86 +#: lib/elements/satin_column.py:97 msgid "* With the selected object press \"P\" to activate the pencil tool." msgstr "* Met het geselecteerde object kies \"P\" om het potlood gereedschap te activeren." -#: lib/elements/satin_column.py:71 lib/elements/satin_column.py:85 +#: lib/elements/satin_column.py:64 lib/elements/satin_column.py:87 msgid "* Hold \"Shift\" while drawing a rung." msgstr "* Houdt \"Shift\" ingedrukt tijdens het tekenen van een sport." -#: lib/elements/satin_column.py:76 +#: lib/elements/satin_column.py:69 msgid "Rungs intersects too many times" msgstr "Sporten kruisen elkaar te vaak" -#: lib/elements/satin_column.py:77 +#: lib/elements/satin_column.py:70 msgid "Satin column: A rung intersects a rail more than once." msgstr "Satijnbaan: Een sport doorkruist een rail meer dan eens." -#: lib/elements/satin_column.py:81 +#: lib/elements/satin_column.py:74 +msgid "Simple Satin" +msgstr "" + +#: lib/elements/satin_column.py:77 +msgid "* Select the satin path" +msgstr "" + +#: lib/elements/satin_column.py:78 +msgid "* Run Extensions > Ink/Stitch > Tools: Satin > Stroke to Satin" +msgstr "" + +#: lib/elements/satin_column.py:83 msgid "Satin has exactly two rungs" msgstr "Satijnbaan heeft precies twee sporten" -#: lib/elements/satin_column.py:82 +#: lib/elements/satin_column.py:84 msgid "There are exactly two rungs. This may lead to false rail/rung detection." msgstr "Er zijn precies twee sporten. Dit kan tot verkeerde resultaten leiden." -#: lib/elements/satin_column.py:90 +#: lib/elements/satin_column.py:92 msgid "Unequal number of points" msgstr "Ongelijk aantal punten" -#: lib/elements/satin_column.py:91 +#: lib/elements/satin_column.py:93 msgid "Satin column: There are no rungs and rails have an unequal number of points." msgstr "Satijnbaan: Er zijn geen sporten en rails hebben een ongelijke aantal punten." -#: lib/elements/satin_column.py:93 +#: lib/elements/satin_column.py:95 msgid "The easiest way to solve this issue is to add one or more rungs. " msgstr "The makkelijkste oplossing is om een of meer sporten toe te voegen. " -#: lib/elements/satin_column.py:94 +#: lib/elements/satin_column.py:96 msgid "Rungs control the stitch direction in satin columns." msgstr "Sporten bepalen de steekrichting voor Satijnbanen." -#: lib/elements/satin_column.py:96 +#: lib/elements/satin_column.py:98 msgid "* Hold \"Shift\" while drawing the rung." msgstr "* Houdt \"Shift\" ingedrukt tijdens het tekenen van de sport." -#: lib/elements/satin_column.py:102 lib/elements/satin_column.py:112 +#: lib/elements/satin_column.py:104 lib/elements/satin_column.py:114 #: inx/inkstitch_select_elements.inx:31 msgid "Satin Column" msgstr "Satijnbaan" -#: lib/elements/satin_column.py:108 +#: lib/elements/satin_column.py:110 msgid "Custom satin column" msgstr "Aangepaste satijnbaan" -#: lib/elements/satin_column.py:113 +#: lib/elements/satin_column.py:115 msgid "\"E\" Stitch" msgstr "\"E\" Steek" -#: lib/elements/satin_column.py:114 +#: lib/elements/satin_column.py:116 msgid "\"S\" Stitch" msgstr "\"S\" Steek" -#: lib/elements/satin_column.py:115 lib/stitch_plan/lock_stitch.py:222 +#: lib/elements/satin_column.py:117 lib/stitch_plan/lock_stitch.py:222 msgid "Zig-zag" msgstr "Zig-zag" -#: lib/elements/satin_column.py:119 lib/elements/stroke.py:72 +#: lib/elements/satin_column.py:121 lib/elements/stroke.py:72 #: inx/inkstitch_break_apart.inx:9 msgid "Method" msgstr "Methode" -#: lib/elements/satin_column.py:129 +#: lib/elements/satin_column.py:131 msgid "Random percentage of satin width decrease" msgstr "" -#: lib/elements/satin_column.py:130 +#: lib/elements/satin_column.py:132 msgid "shorten stitch across rails at most this percent. Two values separated by a space may be used for an asymmetric effect." msgstr "" -#: lib/elements/satin_column.py:139 +#: lib/elements/satin_column.py:141 msgid "Random percentage of satin width increase" msgstr "" -#: lib/elements/satin_column.py:140 +#: lib/elements/satin_column.py:142 msgid "lengthen stitch across rails at most this percent. Two values separated by a space may be used for an asymmetric effect." msgstr "" -#: lib/elements/satin_column.py:149 +#: lib/elements/satin_column.py:151 msgid "Random zig-zag spacing percentage" msgstr "Willekeurige zig-zag afstand in procent" -#: lib/elements/satin_column.py:150 +#: lib/elements/satin_column.py:152 msgid "Amount of random jitter added to zigzag spacing." msgstr "" -#: lib/elements/satin_column.py:156 +#: lib/elements/satin_column.py:158 msgid "Default" msgstr "Standaard" -#: lib/elements/satin_column.py:157 lib/stitch_plan/lock_stitch.py:220 +#: lib/elements/satin_column.py:159 lib/stitch_plan/lock_stitch.py:220 #: inx/inkstitch_break_apart.inx:10 msgid "Simple" msgstr "Eenvoudig" -#: lib/elements/satin_column.py:158 +#: lib/elements/satin_column.py:160 msgid "Staggered" msgstr "" -#: lib/elements/satin_column.py:162 +#: lib/elements/satin_column.py:164 msgid "Split Method" msgstr "" -#: lib/elements/satin_column.py:164 +#: lib/elements/satin_column.py:166 msgid "Display needle penetration points in simulator to see the effect of each split method." msgstr "" -#: lib/elements/satin_column.py:173 lib/elements/satin_column.py:570 +#: lib/elements/satin_column.py:175 lib/elements/satin_column.py:572 msgid "Maximum stitch length" msgstr "Maximale steeklengte" -#: lib/elements/satin_column.py:174 +#: lib/elements/satin_column.py:176 msgid "Maximum stitch length for split stitches." msgstr "Maximale steeklengte voor gesplitste steken." -#: lib/elements/satin_column.py:183 +#: lib/elements/satin_column.py:185 msgid "Random jitter for split stitches" msgstr "" -#: lib/elements/satin_column.py:184 +#: lib/elements/satin_column.py:186 msgid "Randomizes split stitch length if random phase is enabled, stitch position if disabled." msgstr "" -#: lib/elements/satin_column.py:192 +#: lib/elements/satin_column.py:194 msgid "Random phase for split stitches" msgstr "" -#: lib/elements/satin_column.py:193 +#: lib/elements/satin_column.py:195 msgid "Controls whether split stitches are centered or with a random phase (which may increase stitch count)." msgstr "" -#: lib/elements/satin_column.py:201 +#: lib/elements/satin_column.py:203 msgid "Minimum length for random-phase split" msgstr "" -#: lib/elements/satin_column.py:202 +#: lib/elements/satin_column.py:204 msgid "Defaults to maximum stitch length. Smaller values allow for a transition between single-stitch and split-stitch." msgstr "" -#: lib/elements/satin_column.py:212 +#: lib/elements/satin_column.py:214 msgid "Stagger split stitches this many times before repeating" msgstr "" -#: lib/elements/satin_column.py:224 +#: lib/elements/satin_column.py:226 msgid "Short stitch inset" msgstr "Korte steek inzet" -#: lib/elements/satin_column.py:225 +#: lib/elements/satin_column.py:227 msgid "Stitches in areas with high density will be inset by this amount." msgstr "" -#: lib/elements/satin_column.py:235 +#: lib/elements/satin_column.py:237 msgid "Short stitch distance" msgstr "Korte steekafstand" -#: lib/elements/satin_column.py:236 +#: lib/elements/satin_column.py:238 msgid "Inset stitches if the distance between stitches is smaller than this." msgstr "" -#: lib/elements/satin_column.py:251 +#: lib/elements/satin_column.py:253 msgid "Peak-to-peak distance between zig-zags. This is double the mm/stitch measurement used by most mechanical machines." msgstr "Piek-naar-piek afstand tussen zig-zags. Dit is de dubbele waarde (mm/steek) dan de meeste mechanische machines gebruiken. " -#: lib/elements/satin_column.py:264 +#: lib/elements/satin_column.py:266 msgid "Additional pull compensation which varies as a percentage of stitch width. Two values separated by a space may be used for an asymmetric effect." msgstr "" -#: lib/elements/satin_column.py:279 +#: lib/elements/satin_column.py:281 msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This setting expands each pair of needle penetrations outward from the center of the satin column by a fixed length. Two values separated by a space may be used for an asymmetric effect." msgstr "" -#: lib/elements/satin_column.py:293 lib/elements/stroke.py:340 +#: lib/elements/satin_column.py:295 lib/elements/stroke.py:340 msgid "Automatic" msgstr "Automatisch" -#: lib/elements/satin_column.py:294 lib/elements/stroke.py:341 +#: lib/elements/satin_column.py:296 lib/elements/stroke.py:341 msgid "Don't reverse" msgstr "" -#: lib/elements/satin_column.py:295 lib/elements/stroke.py:342 +#: lib/elements/satin_column.py:297 lib/elements/stroke.py:342 msgid "Reverse first rail" msgstr "" -#: lib/elements/satin_column.py:296 lib/elements/stroke.py:343 +#: lib/elements/satin_column.py:298 lib/elements/stroke.py:343 msgid "Reverse second rail" msgstr "" -#: lib/elements/satin_column.py:297 lib/elements/stroke.py:344 +#: lib/elements/satin_column.py:299 lib/elements/stroke.py:344 msgid "Reverse both rails" msgstr "" -#: lib/elements/satin_column.py:303 lib/elements/stroke.py:350 +#: lib/elements/satin_column.py:305 lib/elements/stroke.py:350 msgid "Reverse rails" msgstr "" -#: lib/elements/satin_column.py:304 +#: lib/elements/satin_column.py:306 msgid "This may help if your satin renders very strangely. Default: automatically detect and fix a reversed rail." msgstr "" -#: lib/elements/satin_column.py:353 +#: lib/elements/satin_column.py:355 msgid "Swap rails" msgstr "Rails wisselen" -#: lib/elements/satin_column.py:354 +#: lib/elements/satin_column.py:356 msgid "Swaps the first and second rails of the satin column, affecting which side the thread finished on as well as any sided properties" msgstr "" -#: lib/elements/satin_column.py:365 +#: lib/elements/satin_column.py:367 msgid "Length of stitches for start and end point connections." msgstr "" -#: lib/elements/satin_column.py:387 +#: lib/elements/satin_column.py:389 msgid "Running Stitch Position" msgstr "" -#: lib/elements/satin_column.py:388 +#: lib/elements/satin_column.py:390 #, python-format msgid "Position of running stitches between the rails. 0% is along the first rail, 50% is centered, 100% is along the second rail." msgstr "" -#: lib/elements/satin_column.py:396 +#: lib/elements/satin_column.py:398 msgid "Start at nearest point" msgstr "" -#: lib/elements/satin_column.py:397 +#: lib/elements/satin_column.py:399 msgid "Start at nearest point to previous element. A start position command will overwrite this setting." msgstr "" -#: lib/elements/satin_column.py:404 +#: lib/elements/satin_column.py:406 msgid "End at nearest point" msgstr "" -#: lib/elements/satin_column.py:405 +#: lib/elements/satin_column.py:407 msgid "End at nearest point to the next element. An end position command will overwrite this setting." msgstr "" -#: lib/elements/satin_column.py:411 inx/inkstitch_fill_to_satin.inx:16 +#: lib/elements/satin_column.py:413 inx/inkstitch_fill_to_satin.inx:16 msgid "Contour underlay" msgstr "Omtrek versteviging" -#: lib/elements/satin_column.py:411 lib/elements/satin_column.py:418 -#: lib/elements/satin_column.py:432 lib/elements/satin_column.py:444 -#: lib/elements/satin_column.py:459 +#: lib/elements/satin_column.py:413 lib/elements/satin_column.py:420 +#: lib/elements/satin_column.py:434 lib/elements/satin_column.py:446 +#: lib/elements/satin_column.py:461 msgid "Contour Underlay" msgstr "Omtrek Versteviging" -#: lib/elements/satin_column.py:418 lib/elements/satin_column.py:475 +#: lib/elements/satin_column.py:420 lib/elements/satin_column.py:477 #: lib/sew_stack/stitch_layers/running_stitch/running_stitch_layer.py:20 msgid "Stitch length" msgstr "Steek lengte" -#: lib/elements/satin_column.py:425 lib/elements/satin_column.py:482 +#: lib/elements/satin_column.py:427 lib/elements/satin_column.py:484 #: lib/elements/stroke.py:132 msgid "Stitch tolerance" msgstr "" -#: lib/elements/satin_column.py:427 +#: lib/elements/satin_column.py:429 msgid "All stitches must be within this distance from the path. A lower tolerance means stitches will be closer together. A higher tolerance means sharp corners may be rounded. " msgstr "" -#: lib/elements/satin_column.py:442 +#: lib/elements/satin_column.py:444 msgid "Inset distance (fixed)" msgstr "" -#: lib/elements/satin_column.py:443 +#: lib/elements/satin_column.py:445 msgid "Shrink the outline by a fixed length, to prevent the underlay from showing around the outside of the satin column." msgstr "" -#: lib/elements/satin_column.py:456 +#: lib/elements/satin_column.py:458 msgid "Inset distance (proportional)" msgstr "" -#: lib/elements/satin_column.py:457 +#: lib/elements/satin_column.py:459 msgid "Shrink the outline by a proportion of the column width, to prevent the underlay from showing around the outside of the satin column." msgstr "" -#: lib/elements/satin_column.py:468 inx/inkstitch_fill_to_satin.inx:15 +#: lib/elements/satin_column.py:470 inx/inkstitch_fill_to_satin.inx:15 msgid "Center-walk underlay" msgstr "Middenlijn versteviging" -#: lib/elements/satin_column.py:468 lib/elements/satin_column.py:475 -#: lib/elements/satin_column.py:490 lib/elements/satin_column.py:503 -#: lib/elements/satin_column.py:513 +#: lib/elements/satin_column.py:470 lib/elements/satin_column.py:477 +#: lib/elements/satin_column.py:492 lib/elements/satin_column.py:505 +#: lib/elements/satin_column.py:515 msgid "Center-Walk Underlay" msgstr "Middenlijn Versteviging" -#: lib/elements/satin_column.py:484 +#: lib/elements/satin_column.py:486 msgid "All stitches must be within this distance from the path. A lower tolerance means stitches will be closer together. A higher tolerance means sharp corners may be rounded. Defaults to stitch length." msgstr "" -#: lib/elements/satin_column.py:501 +#: lib/elements/satin_column.py:503 msgid "For an odd number of repeats, this will reverse the direction the satin column is stitched, causing stitching to both begin and end at the start point." msgstr "" -#: lib/elements/satin_column.py:511 lib/gui/tartan/customize_panel.py:38 +#: lib/elements/satin_column.py:513 lib/gui/tartan/customize_panel.py:38 msgid "Position" msgstr "" -#: lib/elements/satin_column.py:512 +#: lib/elements/satin_column.py:514 #, python-format msgid "Position of underlay from between the rails. 0% is along the first rail, 50% is centered, 100% is along the second rail." msgstr "" -#: lib/elements/satin_column.py:520 inx/inkstitch_fill_to_satin.inx:17 +#: lib/elements/satin_column.py:522 inx/inkstitch_fill_to_satin.inx:17 msgid "Zig-zag underlay" msgstr "Zig-zag versteviging" -#: lib/elements/satin_column.py:520 lib/elements/satin_column.py:529 -#: lib/elements/satin_column.py:540 lib/elements/satin_column.py:560 -#: lib/elements/satin_column.py:573 +#: lib/elements/satin_column.py:522 lib/elements/satin_column.py:531 +#: lib/elements/satin_column.py:542 lib/elements/satin_column.py:562 +#: lib/elements/satin_column.py:575 msgid "Zig-zag Underlay" msgstr "Zig-zag Versteviging" -#: lib/elements/satin_column.py:526 +#: lib/elements/satin_column.py:528 msgid "Zig-Zag spacing (peak-to-peak)" msgstr "Zig-zag afstand (piek-naar-piek)" -#: lib/elements/satin_column.py:527 +#: lib/elements/satin_column.py:529 msgid "Distance between peaks of the zig-zags." msgstr "Afstand tussen pieken van de zig-zag steken." -#: lib/elements/satin_column.py:537 +#: lib/elements/satin_column.py:539 msgid "Inset amount (fixed)" msgstr "" -#: lib/elements/satin_column.py:538 lib/elements/satin_column.py:558 +#: lib/elements/satin_column.py:540 lib/elements/satin_column.py:560 msgid "default: half of contour underlay inset" msgstr "standaard: de helft van de versteviging randafstand" -#: lib/elements/satin_column.py:557 +#: lib/elements/satin_column.py:559 msgid "Inset amount (proportional)" msgstr "" -#: lib/elements/satin_column.py:571 +#: lib/elements/satin_column.py:573 msgid "Split stitch if distance of maximum stitch length is exceeded" msgstr "Splitsen van steek als afstand van maximale steeklengte wordt overschreden" +#: lib/elements/stroke.py:34 +msgid "Too few subpaths" +msgstr "Te weinig subpaden" + #: lib/elements/stroke.py:35 msgid "This element renders as running stitch while it has a satin column parameter." msgstr "" @@ -2269,12 +2269,12 @@ msgstr "" msgid "* Use as satin column: add an other rail and optionally rungs." msgstr "" -#: lib/elements/stroke.py:44 lib/extensions/params.py:607 +#: lib/elements/stroke.py:44 lib/extensions/params.py:608 #: inx/inkstitch_select_elements.inx:12 msgid "Stroke" msgstr "Lijn" -#: lib/elements/stroke.py:47 lib/extensions/params.py:280 +#: lib/elements/stroke.py:47 lib/extensions/params.py:281 msgid "Running stitch along paths" msgstr "Lopende steek langs paden" @@ -2510,6 +2510,10 @@ msgstr "* Tekst: Creëer je eigen letters of probeer het belettering gereedchap: msgid "- Extensions > Ink/Stitch > Lettering" msgstr "- Extenties > Ink/Stitch > Belettering" +#: lib/elements/utils/stroke_to_satin.py:96 +msgid "Ink/Stitch cannot convert your stroke into a satin column. Please break up your path and try again." +msgstr "Ink/Stitch kan uw lijn niet omzetten in een satijnen kolom. Breek uw pad op en probeer het opnieuw." + #: lib/exceptions.py:53 msgid "Ink/Stitch experienced an unexpected error. This means it is a bug in Ink/Stitch." msgstr "Ink/Stitch heeft een onverwachte fout ondervonden. Dit betekent dat het een bug in Ink/Stitch is." @@ -2898,6 +2902,84 @@ msgstr "Geef de map van uw aangepaste lettertypes op." msgid "Ink/Stitch Edit JSON" msgstr "" +#: lib/extensions/lettering_fill_composed_glyphs.py:51 +msgid "Upper Case Letters" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:52 +msgid "Lower Case Letters" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:53 +msgid "Other Letters" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:54 +msgid "Digits" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:55 +msgid "Symbols" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:56 +msgid "Punctuation" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:57 +msgid "Closing Punctuation" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:58 +msgid "Diacritics" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:59 +msgid "Special" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:133 +#, python-brace-format +msgid "Found duplicated glyphs in font file: {duplicated_glyphs}" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:139 +msgid "No duplicated glyph found" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:193 +#, python-brace-format +msgid "This or these glyphs have been added:\n" +"{added_char}\n" +"Either fill them or delete them" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:326 +msgid "Additional Punctuation" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:401 +msgid "Simple Diacritics" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:446 +#: lib/extensions/lettering_fill_composed_glyphs.py:472 +#: lib/extensions/lettering_fill_composed_glyphs.py:497 +msgid "nothing to do, you are ready for next step" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:448 +msgid "Other Diacritics" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:474 +msgid "Two pieces letters" +msgstr "" + +#: lib/extensions/lettering_fill_composed_glyphs.py:499 +msgid "Other composed letters" +msgstr "" + #: lib/extensions/lettering_font_sample.py:21 msgid "Font Sample" msgstr "" @@ -2955,57 +3037,57 @@ msgstr "Kan palet niet lezen: ongeldige GIMP-palet aanhef" msgid "Thread Palette" msgstr "Garen Palet" -#: lib/extensions/params.py:292 +#: lib/extensions/params.py:293 msgid "These settings will be applied to 1 object." msgstr "Deze instellingen worden toegepast op 1 object." -#: lib/extensions/params.py:295 +#: lib/extensions/params.py:296 #, python-format msgid "These settings will be applied to %d objects." msgstr "Deze instellingen worden toegepast op %d objecten." -#: lib/extensions/params.py:299 +#: lib/extensions/params.py:300 msgid "Some settings had different values across objects. Select a value from the dropdown or enter a new one." msgstr "Sommige instellingen hadden verschillende waarden voor verschillende objecten. Selecteer een waarde uit de lijst of voer een nieuwe in." -#: lib/extensions/params.py:304 +#: lib/extensions/params.py:305 #, python-format msgid "Disabling this tab will disable the following %d tabs." msgstr "Uitschakelen van dit tabblad zal de volgende %d tabbladen uitschakelen." -#: lib/extensions/params.py:308 +#: lib/extensions/params.py:309 msgid "Disabling this tab will disable the following tab." msgstr "Uitschakelen van dit tabblad zal het volgende tabblad uitschakelen." -#: lib/extensions/params.py:312 +#: lib/extensions/params.py:313 #, python-format msgid "Enabling this tab will disable %s and vice-versa." msgstr "Inschakelen van dit tabblad zal %s uitschakelen en vice-versa." -#: lib/extensions/params.py:392 +#: lib/extensions/params.py:393 msgid "Inkscape objects" msgstr "Inkscape objecten" -#: lib/extensions/params.py:453 +#: lib/extensions/params.py:454 msgid "No options available" msgstr "" -#: lib/extensions/params.py:473 +#: lib/extensions/params.py:474 #: lib/sew_stack/stitch_layers/mixins/randomization.py:33 msgid "Re-roll" msgstr "" -#: lib/extensions/params.py:502 +#: lib/extensions/params.py:503 msgid "Click to force this parameter to be saved when you click \"Apply and Quit\"" msgstr "Klik om deze parameter op te slaan als je \"Toepassen en Afsluiten\" kiest" -#: lib/extensions/params.py:512 +#: lib/extensions/params.py:513 msgid "This parameter will be saved when you click \"Apply and Quit\"" msgstr "Deze parameter wordt opgeslagen als je \"Toepassen en Afsluiten\" klikt" -#: lib/extensions/params.py:539 lib/extensions/sew_stack_editor.py:118 +#: lib/extensions/params.py:540 lib/extensions/sew_stack_editor.py:118 #: lib/gui/edit_json/settings_panel.py:63 lib/gui/lettering/main_panel.py:57 -#: lib/gui/lettering_font_sample.py:69 +#: lib/gui/lettering_font_sample.py:70 #: lib/gui/satin_multicolor/main_panel.py:54 #: lib/gui/simulator/simulator_preferences.py:53 #: lib/gui/tartan/main_panel.py:67 print/templates/custom-page.html:23 @@ -3015,16 +3097,16 @@ msgstr "Deze parameter wordt opgeslagen als je \"Toepassen en Afsluiten\" klikt" msgid "Cancel" msgstr "Annuleren" -#: lib/extensions/params.py:544 +#: lib/extensions/params.py:545 msgid "Use Last Settings" msgstr "Gebruik Vorige Instellingen" -#: lib/extensions/params.py:547 lib/extensions/sew_stack_editor.py:122 +#: lib/extensions/params.py:548 lib/extensions/sew_stack_editor.py:122 #: lib/gui/lettering/main_panel.py:55 msgid "Apply and Quit" msgstr "Toepassen en Sluiten" -#: lib/extensions/params.py:844 lib/extensions/sew_stack_editor.py:552 +#: lib/extensions/params.py:845 lib/extensions/sew_stack_editor.py:552 msgid "Embroidery Params" msgstr "Borduur Parameters" @@ -3150,20 +3232,16 @@ msgstr "" msgid "Cannot convert a satin column into a live path effect satin. Please select a stroke." msgstr "" -#: lib/extensions/stroke_to_satin.py:36 +#: lib/extensions/stroke_to_satin.py:27 msgid "Please select at least one line to convert to a satin column." msgstr "Selecteer een of meer lijnen om naar satijnbaan om te zetten." -#. : Convert To Satin extension, user selected one or more objects that were -#. not lines. -#: lib/extensions/stroke_to_satin.py:41 +#. : Convert To Satin extension, user selected only objects that were not +#. lines. +#: lib/extensions/stroke_to_satin.py:59 msgid "Only simple lines may be converted to satin columns." msgstr "Alleen eenvoudige lijnen kunnen worden omgezet naar satijnbanen." -#: lib/extensions/stroke_to_satin.py:153 -msgid "Ink/Stitch cannot convert your stroke into a satin column. Please break up your path and try again." -msgstr "Ink/Stitch kan uw lijn niet omzetten in een satijnen kolom. Breek uw pad op en probeer het opnieuw." - #: lib/extensions/tartan.py:66 msgid "To create a tartan pattern please select at least one element with a fill color." msgstr "" @@ -3281,7 +3359,7 @@ msgstr "garenlijst" #: lib/gui/abort_message.py:38 lib/gui/apply_palette.py:64 #: lib/gui/edit_json/help_panel.py:27 lib/gui/element_info.py:57 -#: lib/gui/lettering_font_sample.py:97 +#: lib/gui/lettering_font_sample.py:98 #: lib/gui/satin_multicolor/help_panel.py:27 lib/gui/tartan/help_panel.py:27 msgid "More information on our website:" msgstr "" @@ -3315,7 +3393,7 @@ msgid "Select color palette" msgstr "" #: lib/gui/apply_palette.py:44 lib/gui/edit_json/settings_panel.py:65 -#: lib/gui/lettering_font_sample.py:71 +#: lib/gui/lettering_font_sample.py:72 #: lib/gui/satin_multicolor/main_panel.py:56 #: lib/gui/simulator/simulator_preferences.py:55 #: lib/gui/tartan/main_panel.py:69 lib/gui/test_swatches.py:117 @@ -3324,7 +3402,7 @@ msgstr "Toepassen" #: lib/gui/apply_palette.py:49 lib/gui/edit_json/main_panel.py:75 #: lib/gui/element_info.py:42 lib/gui/lettering/main_panel.py:47 -#: lib/gui/lettering_font_sample.py:82 +#: lib/gui/lettering_font_sample.py:83 #: lib/gui/satin_multicolor/main_panel.py:51 lib/gui/tartan/main_panel.py:64 #: lib/gui/test_swatches.py:83 inx/inkstitch_apply_threadlist.inx:89 #: inx/inkstitch_auto_run.inx:25 inx/inkstitch_auto_satin.inx:16 @@ -3338,6 +3416,7 @@ msgstr "Toepassen" #: inx/inkstitch_knockdown_fill.inx:43 #: inx/inkstitch_lettering_along_path.inx:25 #: inx/inkstitch_lettering_custom_font_dir.inx:11 +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:27 #: inx/inkstitch_lettering_force_lock_stitches.inx:22 #: inx/inkstitch_lettering_generate_json.inx:144 #: inx/inkstitch_lettering_remove_kerning.inx:12 @@ -3668,45 +3747,45 @@ msgstr "" msgid "Scale" msgstr "Schaal" -#: lib/gui/lettering_font_sample.py:24 +#: lib/gui/lettering_font_sample.py:25 #: inx/inkstitch_lettering_font_sample.inx:3 msgid "Font Sampling" msgstr "" -#: lib/gui/edit_json/main_panel.py:74 lib/gui/lettering_font_sample.py:39 +#: lib/gui/edit_json/main_panel.py:74 lib/gui/lettering_font_sample.py:40 #: lib/gui/simulator/view_panel.py:129 print/templates/ui.html:5 #: print/templates/ui.html:15 inx/inkstitch_lettering_generate_json.inx:78 #: inx/inkstitch_png_realistic.inx:14 inx/inkstitch_png_simple.inx:14 msgid "Settings" msgstr "Instellingen" -#: lib/gui/lettering_font_sample.py:50 +#: lib/gui/lettering_font_sample.py:51 msgid "Stitch direction" msgstr "" -#: lib/gui/lettering_font_sample.py:52 lib/gui/tartan/customize_panel.py:46 +#: lib/gui/lettering_font_sample.py:53 lib/gui/tartan/customize_panel.py:46 #: inx/inkstitch_batch_lettering.inx:21 msgid "Scale (%)" msgstr "Schaal (%)" -#: lib/gui/lettering_font_sample.py:54 +#: lib/gui/lettering_font_sample.py:55 msgid "Max. line width" msgstr "" #: lib/gui/lettering/option_panel.py:94 lib/gui/lettering/option_panel.py:96 -#: lib/gui/lettering_font_sample.py:56 inx/inkstitch_batch_lettering.inx:22 +#: lib/gui/lettering_font_sample.py:57 inx/inkstitch_batch_lettering.inx:22 msgid "Color sort" msgstr "Kleursortering" -#: lib/gui/lettering_font_sample.py:89 +#: lib/gui/lettering_font_sample.py:90 msgid " This extension helps font creators to generate an output of every glyph from a selected font." msgstr "" -#: lib/gui/lettering_font_sample.py:103 lib/gui/lettering_font_sample.py:104 +#: lib/gui/lettering_font_sample.py:104 lib/gui/lettering_font_sample.py:105 msgid "https://inkstitch.org/docs/font-tools/#font-sampling" msgstr "" -#: lib/gui/lettering_font_sample.py:222 +#: lib/gui/lettering_font_sample.py:226 #, python-brace-format msgid "The glyphlist for this font seems to be outdated.\n\n" "Please update the glyph list for {font_name}:\n" @@ -4251,6 +4330,7 @@ msgstr "" #: inx/inkstitch_knockdown_fill.inx:17 #: inx/inkstitch_lettering_along_path.inx:17 #: inx/inkstitch_lettering_custom_font_dir.inx:8 +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:8 #: inx/inkstitch_lettering_force_lock_stitches.inx:8 #: inx/inkstitch_lettering_remove_kerning.inx:9 #: inx/inkstitch_lettering_set_color_sort_index.inx:8 @@ -4298,6 +4378,7 @@ msgstr "" #: lib/gui/test_swatches.py:100 inx/inkstitch_apply_threadlist.inx:100 #: inx/inkstitch_fill_to_stroke.inx:33 inx/inkstitch_jump_to_stroke.inx:44 #: inx/inkstitch_jump_to_trim.inx:29 +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:30 #: inx/inkstitch_remove_embroidery_settings.inx:143 #: inx/inkstitch_stroke_to_lpe_satin.inx:32 #: inx/inkstitch_zigzag_line_to_satin.inx:28 @@ -6834,6 +6915,7 @@ msgstr "" #: inx/inkstitch_lettering_custom_font_dir.inx:27 #: inx/inkstitch_lettering_edit_json.inx:12 +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:42 #: inx/inkstitch_lettering_font_sample.inx:12 #: inx/inkstitch_lettering_force_lock_stitches.inx:44 #: inx/inkstitch_lettering_generate_json.inx:12 @@ -6852,6 +6934,66 @@ msgstr "" msgid "Feature to verify or update the font information file for an existing font" msgstr "" +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:3 +msgid "Fill Composed Glyphs" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:12 +msgid "Choose action" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:13 +msgid "Step 1 : Comma and period and hyphen" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:14 +msgid "Step 2 : Undecomposable Letters" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:15 +msgid "Step 3 : Digits, Symbols and Opening Punctuation" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:16 +msgid "Step 4 : Closing Punctuation" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:17 +msgid "Step 5 : First diacritics" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:18 +msgid "Step 6 : All diacritics" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:19 +msgid "Step 7 : Two pieces Letters" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:20 +msgid "Step 8 : Other Composed Letters" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:21 +msgid "Check duplicate GlyphLayers" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:22 +msgid "Sort by Category" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:28 +msgid "This extension helps the font digitizer to organize its work in steps to maximize reuse of already digitized letters." +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:31 +msgid "https://inkstitch.org/docs/font-tools/#fill_composed_glyphs" +msgstr "" + +#: inx/inkstitch_lettering_fill_composed_glyphs.inx:39 +msgid "Help with composed glyphs like é,ç or ï" +msgstr "" + #: inx/inkstitch_lettering_font_sample.inx:9 msgid "Inserts all glyphs of a specified font into the document" msgstr "" |