diff options
Diffstat (limited to 'translations/messages_tr_TR.po')
| -rw-r--r-- | translations/messages_tr_TR.po | 596 |
1 files changed, 388 insertions, 208 deletions
diff --git a/translations/messages_tr_TR.po b/translations/messages_tr_TR.po index 95b40c27..fcfda8b3 100644 --- a/translations/messages_tr_TR.po +++ b/translations/messages_tr_TR.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2022-04-25 02:19+0000\n" -"PO-Revision-Date: 2022-04-29 02:29\n" +"POT-Creation-Date: 2022-05-21 01:55+0000\n" +"PO-Revision-Date: 2022-05-24 02:25\n" "Last-Translator: \n" "Language-Team: Turkish\n" "MIME-Version: 1.0\n" @@ -16,7 +16,7 @@ msgstr "" "Project-Id-Version: \n" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-04-25 02:19+0000\n" +"POT-Creation-Date: 2022-05-21 01:55+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: \n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -405,58 +405,70 @@ msgstr "" #. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# #. command attached to an object #: lib/commands.py:30 inx/inkstitch_object_commands.inx:6 -msgid "Auto-route satin stitch starting position" +msgid "Auto-route running stitch starting position" msgstr "" #. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# #. command attached to an object #: lib/commands.py:33 inx/inkstitch_object_commands.inx:7 -msgid "Auto-route satin stitch ending position" +msgid "Auto-route running stitch ending position" msgstr "" #. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# #. command attached to an object #: lib/commands.py:36 inx/inkstitch_object_commands.inx:8 +msgid "Auto-route satin stitch starting position" +msgstr "" + +#. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# +#. command attached to an object +#: lib/commands.py:39 inx/inkstitch_object_commands.inx:9 +msgid "Auto-route satin stitch ending position" +msgstr "" + +#. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# +#. command attached to an object +#: lib/commands.py:42 inx/inkstitch_object_commands.inx:10 msgid "Stop (pause machine) after sewing this object" msgstr "Bu objeyi diktikten sonra dur (makineyi duraklat)" #. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# #. command attached to an object -#: lib/commands.py:39 inx/inkstitch_object_commands.inx:9 +#: lib/commands.py:45 inx/inkstitch_object_commands.inx:11 msgid "Trim thread after sewing this object" msgstr "Bu objeyi diktikten sonra ipi kes" #. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# #. command attached to an object -#: lib/commands.py:42 inx/inkstitch_object_commands.inx:10 +#: lib/commands.py:48 inx/inkstitch_object_commands.inx:12 msgid "Ignore this object (do not stitch)" msgstr "Bu objeyi atla (dikme)" #. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# #. command attached to an object -#: lib/commands.py:45 inx/inkstitch_object_commands.inx:11 +#: lib/commands.py:51 inx/inkstitch_object_commands.inx:13 msgid "Satin cut point (use with Cut Satin Column)" msgstr "Saten kesim noktası (Saten Kesin Sütunu ile kullan)" #. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# #. command that affects a layer -#: lib/commands.py:48 inx/inkstitch_layer_commands.inx:7 +#: lib/commands.py:54 inx/inkstitch_layer_commands.inx:7 msgid "Ignore layer (do not stitch any objects in this layer)" msgstr "Kat atla (bu katta obje dikme)" #. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# #. command that affects entire document -#: lib/commands.py:51 inx/inkstitch_global_commands.inx:7 +#: lib/commands.py:57 inx/inkstitch_global_commands.inx:7 msgid "Origin for exported embroidery files" msgstr "" #. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# #. command that affects entire document -#: lib/commands.py:54 inx/inkstitch_global_commands.inx:9 +#: lib/commands.py:60 inx/inkstitch_global_commands.inx:9 msgid "Jump destination for Stop commands (a.k.a. \"Frame Out position\")." msgstr "" -#: lib/commands.py:212 +#: lib/commands.py:219 #, python-format msgid "Error: there is more than one %(command)s command in the document, but there can only be one. Please remove all but one." msgstr "" @@ -466,312 +478,400 @@ msgstr "" #. command name to them. Contents of %(description)s are in a separate #. translation #. string. -#: lib/commands.py:219 +#: lib/commands.py:226 #, python-format msgid "%(command)s: %(description)s" msgstr "" -#: lib/commands.py:284 lib/commands.py:397 +#: lib/commands.py:291 lib/commands.py:406 msgid "Ink/Stitch Command" msgstr "" #. : the name of the line that connects a command to the object it applies to -#: lib/commands.py:310 +#: lib/commands.py:316 msgid "connector" msgstr "" #. : the name of a command symbol (example: scissors icon for trim command) -#: lib/commands.py:326 +#: lib/commands.py:335 msgid "command marker" msgstr "" -#: lib/elements/auto_fill.py:23 -msgid "Small Fill" +#: lib/elements/clone.py:20 +msgid "Clone Object" msgstr "" -#: lib/elements/auto_fill.py:24 -msgid "This fill object is so small that it would probably look better as running stitch or satin column. For very small shapes, fill stitch is not possible, and Ink/Stitch will use running stitch around the outline instead." +#: lib/elements/clone.py:21 +msgid "There are one or more clone objects in this document. Ink/Stitch can work with single clones, but you are limited to set a very few parameters. " msgstr "" -#: lib/elements/auto_fill.py:30 lib/elements/auto_fill.py:146 -msgid "Expand" +#: lib/elements/clone.py:24 +msgid "If you want to convert the clone into a real element, follow these steps:" msgstr "" -#: lib/elements/auto_fill.py:31 -msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead." +#: lib/elements/clone.py:25 +msgid "* Select the clone" msgstr "" -#: lib/elements/auto_fill.py:36 lib/elements/auto_fill.py:123 -msgid "Inset" +#: lib/elements/clone.py:26 lib/elements/clone.py:37 +msgid "* Run: Edit > Clone > Unlink Clone (Alt+Shift+D)" msgstr "" -#: lib/elements/auto_fill.py:37 -msgid "The underlay inset parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use the original size instead." +#: lib/elements/clone.py:31 +msgid "Clone is not embroiderable" msgstr "" -#: lib/elements/auto_fill.py:42 -msgid "AutoFill" +#: lib/elements/clone.py:32 +msgid "There are one ore more clone objects in this document. A clone must be a direct child of an embroiderable element. Ink/Stitch cannot embroider clones of groups or other not embroiderable elements (text or image)." msgstr "" -#: lib/elements/auto_fill.py:45 -msgid "Automatically routed fill stitching" +#: lib/elements/clone.py:35 +msgid "Convert the clone into a real element:" msgstr "" -#: lib/elements/auto_fill.py:65 -msgid "Running stitch length (traversal between sections)" +#: lib/elements/clone.py:36 +msgid "* Select the clone." msgstr "" -#: lib/elements/auto_fill.py:66 -msgid "Length of stitches around the outline of the fill region used when moving from section to section." +#: lib/elements/clone.py:51 +msgid "Clone" msgstr "" -#: lib/elements/auto_fill.py:74 -msgid "Underlay" +#: lib/elements/clone.py:57 +msgid "Custom fill angle" msgstr "" -#: lib/elements/auto_fill.py:74 lib/elements/auto_fill.py:83 -#: lib/elements/auto_fill.py:105 lib/elements/auto_fill.py:116 -#: lib/elements/auto_fill.py:126 lib/elements/auto_fill.py:138 -#: lib/elements/auto_fill.py:172 -msgid "AutoFill Underlay" +#: lib/elements/clone.py:58 +msgid "This setting will apply a custom fill angle for the clone." msgstr "" -#: lib/elements/auto_fill.py:80 -msgid "Fill angle" +#: lib/elements/element.py:202 +msgid "Allow lock stitches" msgstr "" -#: lib/elements/auto_fill.py:81 -msgid "Default: fill angle + 90 deg. Insert comma-seperated list for multiple layers." +#: lib/elements/element.py:203 +msgid "Tie thread at the beginning and/or end of this object. Manual stitch will not add lock stitches." msgstr "" -#: lib/elements/auto_fill.py:102 -msgid "Row spacing" +#. options to allow lock stitch before and after objects +#: lib/elements/element.py:207 +msgid "Both" msgstr "" -#: lib/elements/auto_fill.py:103 -msgid "default: 3x fill row spacing" +#: lib/elements/element.py:207 +msgid "Before" msgstr "" -#: lib/elements/auto_fill.py:113 -msgid "Max stitch length" -msgstr "Max dikiş uzunluğu" +#: lib/elements/element.py:207 +msgid "After" +msgstr "" -#: lib/elements/auto_fill.py:114 -msgid "default: equal to fill max stitch length" +#: lib/elements/element.py:207 +msgid "Neither" msgstr "" -#: lib/elements/auto_fill.py:124 -msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill." +#: lib/elements/element.py:216 +#: inx/inkstitch_lettering_force_lock_stitches.inx:3 +msgid "Force lock stitches" msgstr "" -#: lib/elements/auto_fill.py:135 lib/elements/fill.py:75 -msgid "Skip last stitch in each row" -msgstr "Her sırada son dikişi atla" +#: lib/elements/element.py:217 +msgid "Sew lock stitches after sewing this element, even if the distance to the next object is shorter than defined by the collapse length value in the Ink/Stitch preferences." +msgstr "" -#: lib/elements/auto_fill.py:136 lib/elements/fill.py:76 -msgid "The last stitch in each row is quite close to the first stitch in the next row. Skipping it decreases stitch count and density." +#: lib/elements/element.py:261 +#, python-format +msgid "Object %(id)s has an empty 'd' attribute. Please delete this object from your document." msgstr "" -#: lib/elements/auto_fill.py:147 -msgid "Expand the shape before fill stitching, to compensate for gaps between shapes." +#. used when showing an error message to the user such as +#. "Some Path (path1234): error: satin column: One or more of the rungs doesn't +#. intersect both rails." +#: lib/elements/element.py:354 +msgid "error:" +msgstr "hata:" + +#: lib/elements/empty_d_object.py:13 +msgid "Empty D-Attribute" msgstr "" -#: lib/elements/auto_fill.py:156 lib/elements/auto_fill.py:168 -msgid "Underpath" +#: lib/elements/empty_d_object.py:14 +msgid "There is an invalid path object in the document, the d-attribute is missing." msgstr "" -#: lib/elements/auto_fill.py:157 lib/elements/auto_fill.py:169 -msgid "Travel inside the shape when moving from section to section. Underpath stitches avoid traveling in the direction of the row angle so that they are not visible. This gives them a jagged appearance." +#: lib/elements/empty_d_object.py:16 +msgid "* Run Extensions > Ink/Stitch > Troubleshoot > Cleanup Document..." msgstr "" -#: lib/elements/auto_fill.py:266 -msgid "Error during autofill! This means that there is a problem with Ink/Stitch." -msgstr "Otodolgu sırasında hata! Bu Ink/Stitch ile bir problem mevcut olduğu anlamına gelir." +#: lib/elements/fill_stitch.py:27 +msgid "Small Fill" +msgstr "" -#. this message is followed by a URL: -#. https://github.com/inkstitch/inkstitch/issues/new -#: lib/elements/auto_fill.py:269 -msgid "If you'd like to help us make Ink/Stitch better, please paste this whole message into a new issue at: " +#: lib/elements/fill_stitch.py:28 +msgid "This fill object is so small that it would probably look better as running stitch or satin column. For very small shapes, fill stitch is not possible, and Ink/Stitch will use running stitch around the outline instead." msgstr "" -#: lib/elements/clone.py:25 -msgid "Clone Object" +#: lib/elements/fill_stitch.py:34 lib/elements/fill_stitch.py:399 +msgid "Expand" msgstr "" -#: lib/elements/clone.py:26 -msgid "There are one or more clone objects in this document. Ink/Stitch can work with single clones, but you are limited to set a very few parameters. " +#: lib/elements/fill_stitch.py:35 +msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead." msgstr "" -#: lib/elements/clone.py:29 -msgid "If you want to convert the clone into a real element, follow these steps:" +#: lib/elements/fill_stitch.py:40 lib/elements/fill_stitch.py:376 +msgid "Inset" msgstr "" -#: lib/elements/clone.py:30 -msgid "* Select the clone" +#: lib/elements/fill_stitch.py:41 +msgid "The underlay inset parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use the original size instead." msgstr "" -#: lib/elements/clone.py:31 lib/elements/clone.py:42 -msgid "* Run: Edit > Clone > Unlink Clone (Alt+Shift+D)" +#: lib/elements/fill_stitch.py:46 +msgid "Missing Guideline" msgstr "" -#: lib/elements/clone.py:36 -msgid "Clone is not embroiderable" +#: lib/elements/fill_stitch.py:47 +msgid "This object is set to \"Guided Fill\", but has no guide line." msgstr "" -#: lib/elements/clone.py:37 -msgid "There are one ore more clone objects in this document. A clone must be a direct child of an embroiderable element. Ink/Stitch cannot embroider clones of groups or other not embroiderable elements (text or image)." +#: lib/elements/fill_stitch.py:49 +msgid "* Create a stroke object" msgstr "" -#: lib/elements/clone.py:40 -msgid "Convert the clone into a real element:" +#: lib/elements/fill_stitch.py:50 +msgid "* Select this object and run Extensions > Ink/Stitch > Edit > Selection to guide line" msgstr "" -#: lib/elements/clone.py:41 -msgid "* Select the clone." +#: lib/elements/fill_stitch.py:55 +msgid "Disjointed Guide Line" msgstr "" -#: lib/elements/clone.py:56 -msgid "Clone" +#: lib/elements/fill_stitch.py:56 +msgid "The guide line of this object isn't within the object borders. The guide line works best, if it is within the target element." msgstr "" -#: lib/elements/clone.py:62 -msgid "Custom fill angle" +#: lib/elements/fill_stitch.py:59 +msgid "* Move the guide line into the element" msgstr "" -#: lib/elements/clone.py:63 -msgid "This setting will apply a custom fill angle for the clone." +#: lib/elements/fill_stitch.py:64 +msgid "Multiple Guide Lines" msgstr "" -#: lib/elements/element.py:198 -msgid "Allow lock stitches" +#: lib/elements/fill_stitch.py:65 +msgid "This object has multiple guide lines, but only the first one will be used." msgstr "" -#: lib/elements/element.py:199 -msgid "Tie thread at the beginning and/or end of this object. Manual stitch will not add lock stitches." +#: lib/elements/fill_stitch.py:67 +msgid "* Remove all guide lines, except for one." msgstr "" -#. options to allow lock stitch before and after objects -#: lib/elements/element.py:203 -msgid "Both" +#: lib/elements/fill_stitch.py:72 +msgid "Unconnected" msgstr "" -#: lib/elements/element.py:203 -msgid "Before" +#: lib/elements/fill_stitch.py:73 +msgid "Fill: This object is made up of unconnected shapes. This is not allowed because Ink/Stitch doesn't know what order to stitch them in. Please break this object up into separate shapes." msgstr "" -#: lib/elements/element.py:203 -msgid "After" +#: lib/elements/fill_stitch.py:77 lib/elements/fill_stitch.py:85 +msgid "* Extensions > Ink/Stitch > Fill Tools > Break Apart Fill Objects" msgstr "" -#: lib/elements/element.py:203 -msgid "Neither" +#: lib/elements/fill_stitch.py:82 +msgid "Border crosses itself" msgstr "" -#: lib/elements/element.py:212 -#: inx/inkstitch_lettering_force_lock_stitches.inx:3 -msgid "Force lock stitches" +#: lib/elements/fill_stitch.py:83 +msgid "Fill: Shape is not valid. This can happen if the border crosses over itself." msgstr "" -#: lib/elements/element.py:213 -msgid "Sew lock stitches after sewing this element, even if the distance to the next object is shorter than defined by the collapse length value in the Ink/Stitch preferences." +#: lib/elements/fill_stitch.py:90 +msgid "FillStitch" msgstr "" -#: lib/elements/element.py:257 -#, python-format -msgid "Object %(id)s has an empty 'd' attribute. Please delete this object from your document." +#: lib/elements/fill_stitch.py:93 +msgid "Automatically routed fill stitching" msgstr "" -#. used when showing an error message to the user such as -#. "Some Path (path1234): error: satin column: One or more of the rungs doesn't -#. intersect both rails." -#: lib/elements/element.py:345 -msgid "error:" -msgstr "hata:" +#: lib/elements/fill_stitch.py:98 +msgid "Fill method" +msgstr "" -#: lib/elements/empty_d_object.py:13 -msgid "Empty D-Attribute" +#: lib/elements/fill_stitch.py:99 +msgid "Auto Fill" msgstr "" -#: lib/elements/empty_d_object.py:14 -msgid "There is an invalid path object in the document, the d-attribute is missing." +#: lib/elements/fill_stitch.py:99 +msgid "Contour Fill" msgstr "" -#: lib/elements/empty_d_object.py:16 -msgid "* Run Extensions > Ink/Stitch > Troubleshoot > Cleanup Document..." +#: lib/elements/fill_stitch.py:99 +msgid "Guided Fill" msgstr "" -#: lib/elements/fill.py:23 -msgid "Unconnected" +#: lib/elements/fill_stitch.py:99 +msgid "Legacy Fill" msgstr "" -#: lib/elements/fill.py:24 -msgid "Fill: This object is made up of unconnected shapes. This is not allowed because Ink/Stitch doesn't know what order to stitch them in. Please break this object up into separate shapes." +#: lib/elements/fill_stitch.py:104 +msgid "Contour Fill Strategy" msgstr "" -#: lib/elements/fill.py:28 lib/elements/fill.py:36 -msgid "* Extensions > Ink/Stitch > Fill Tools > Break Apart Fill Objects" +#: lib/elements/fill_stitch.py:105 +msgid "Inner to Outer" msgstr "" -#: lib/elements/fill.py:33 -msgid "Border crosses itself" +#: lib/elements/fill_stitch.py:105 +msgid "Single spiral" msgstr "" -#: lib/elements/fill.py:34 -msgid "Fill: Shape is not valid. This can happen if the border crosses over itself." +#: lib/elements/fill_stitch.py:105 +msgid "Double spiral" +msgstr "" + +#: lib/elements/fill_stitch.py:110 +msgid "Join Style" +msgstr "" + +#: lib/elements/fill_stitch.py:111 +msgid "Round" +msgstr "" + +#: lib/elements/fill_stitch.py:111 +msgid "Mitered" msgstr "" -#: lib/elements/fill.py:41 -msgid "Fill" +#: lib/elements/fill_stitch.py:111 +msgid "Beveled" msgstr "" -#: lib/elements/fill.py:48 -msgid "Manually routed fill stitching" +#: lib/elements/fill_stitch.py:116 +msgid "Avoid self-crossing" msgstr "" -#: lib/elements/fill.py:49 -msgid "AutoFill is the default method for generating fill stitching." +#: lib/elements/fill_stitch.py:121 +msgid "Clockwise" msgstr "" -#: lib/elements/fill.py:58 +#: lib/elements/fill_stitch.py:127 msgid "Angle of lines of stitches" msgstr "" -#: lib/elements/fill.py:59 +#: lib/elements/fill_stitch.py:128 msgid "The angle increases in a counter-clockwise direction. 0 is horizontal. Negative angles are allowed." msgstr "" -#: lib/elements/fill.py:86 +#: lib/elements/fill_stitch.py:146 lib/elements/fill_stitch.py:388 +msgid "Skip last stitch in each row" +msgstr "Her sırada son dikişi atla" + +#: lib/elements/fill_stitch.py:147 lib/elements/fill_stitch.py:389 +msgid "The last stitch in each row is quite close to the first stitch in the next row. Skipping it decreases stitch count and density." +msgstr "" + +#: lib/elements/fill_stitch.py:160 msgid "Flip fill (start right-to-left)" msgstr "" -#: lib/elements/fill.py:87 +#: lib/elements/fill_stitch.py:161 msgid "The flip option can help you with routing your stitch path. When you enable flip, stitching goes from right-to-left instead of left-to-right." msgstr "" -#: lib/elements/fill.py:96 +#: lib/elements/fill_stitch.py:172 msgid "Spacing between rows" msgstr "" -#: lib/elements/fill.py:97 +#: lib/elements/fill_stitch.py:173 msgid "Distance between rows of stitches." msgstr "" -#: lib/elements/fill.py:110 +#: lib/elements/fill_stitch.py:187 msgid "Maximum fill stitch length" msgstr "" -#: lib/elements/fill.py:111 +#: lib/elements/fill_stitch.py:188 msgid "The length of each stitch in a row. Shorter stitch may be used at the start or end of a row." msgstr "" -#: lib/elements/fill.py:120 +#: lib/elements/fill_stitch.py:199 msgid "Stagger rows this many times before repeating" msgstr "" -#: lib/elements/fill.py:121 +#: lib/elements/fill_stitch.py:200 msgid "Setting this dictates how many rows apart the stitches will be before they fall in the same column position." msgstr "" +#: lib/elements/fill_stitch.py:315 +msgid "Running stitch length (traversal between sections)" +msgstr "" + +#: lib/elements/fill_stitch.py:316 +msgid "Length of stitches around the outline of the fill region used when moving from section to section." +msgstr "" + +#: lib/elements/fill_stitch.py:326 +msgid "Underlay" +msgstr "" + +#: lib/elements/fill_stitch.py:326 lib/elements/fill_stitch.py:335 +#: lib/elements/fill_stitch.py:358 lib/elements/fill_stitch.py:369 +#: lib/elements/fill_stitch.py:379 lib/elements/fill_stitch.py:391 +#: lib/elements/fill_stitch.py:429 +msgid "Fill Underlay" +msgstr "" + +#: lib/elements/fill_stitch.py:332 +msgid "Fill angle" +msgstr "" + +#: lib/elements/fill_stitch.py:333 +msgid "Default: fill angle + 90 deg. Insert comma-seperated list for multiple layers." +msgstr "" + +#: lib/elements/fill_stitch.py:355 +msgid "Row spacing" +msgstr "" + +#: lib/elements/fill_stitch.py:356 +msgid "default: 3x fill row spacing" +msgstr "" + +#: lib/elements/fill_stitch.py:366 +msgid "Max stitch length" +msgstr "Max dikiş uzunluğu" + +#: lib/elements/fill_stitch.py:367 +msgid "default: equal to fill max stitch length" +msgstr "" + +#: lib/elements/fill_stitch.py:377 +msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill." +msgstr "" + +#: lib/elements/fill_stitch.py:400 +msgid "Expand the shape before fill stitching, to compensate for gaps between shapes." +msgstr "" + +#: lib/elements/fill_stitch.py:411 lib/elements/fill_stitch.py:425 +msgid "Underpath" +msgstr "" + +#: lib/elements/fill_stitch.py:412 lib/elements/fill_stitch.py:426 +msgid "Travel inside the shape when moving from section to section. Underpath stitches avoid traveling in the direction of the row angle so that they are not visible. This gives them a jagged appearance." +msgstr "" + +#: lib/elements/fill_stitch.py:629 +msgid "Error during autofill! This means that there is a problem with Ink/Stitch." +msgstr "Otodolgu sırasında hata! Bu Ink/Stitch ile bir problem mevcut olduğu anlamına gelir." + +#. this message is followed by a URL: +#. https://github.com/inkstitch/inkstitch/issues/new +#: lib/elements/fill_stitch.py:632 +msgid "If you'd like to help us make Ink/Stitch better, please paste this whole message into a new issue at: " +msgstr "" + #: lib/elements/image.py:13 msgid "Image" msgstr "" @@ -788,27 +888,27 @@ msgstr "" msgid "* Alternatively redraw the image with the pen (P) or bezier (B) tool" msgstr "" -#: lib/elements/pattern.py:14 -msgid "Pattern Element" +#: lib/elements/marker.py:14 +msgid "Marker Element" msgstr "" -#: lib/elements/pattern.py:15 -msgid "This element will not be embroidered. It will appear as a pattern applied to objects in the same group as it. Objects in sub-groups will be ignored." +#: lib/elements/marker.py:15 +msgid "This element will not be embroidered. It will be applied to objects in the same group. Objects in sub-groups will be ignored." msgstr "" -#: lib/elements/pattern.py:19 -msgid "To disable pattern mode, remove the pattern marker:" +#: lib/elements/marker.py:18 +msgid "Turn back to normal embroidery element mode, remove the marker:" msgstr "" -#: lib/elements/pattern.py:20 +#: lib/elements/marker.py:19 msgid "* Open the Fill and Stroke panel (Objects > Fill and Stroke)" msgstr "" -#: lib/elements/pattern.py:21 +#: lib/elements/marker.py:20 msgid "* Go to the Stroke style tab" msgstr "" -#: lib/elements/pattern.py:22 +#: lib/elements/marker.py:21 msgid "* Under \"Markers\" choose the first (empty) option in the first dropdown list." msgstr "" @@ -1066,15 +1166,15 @@ msgstr "Tekrarlamalar" msgid "Defines how many times to run down and back along the path." msgstr "" -#: lib/elements/stroke.py:109 +#: lib/elements/stroke.py:110 msgid "Manual stitch placement" msgstr "" -#: lib/elements/stroke.py:110 +#: lib/elements/stroke.py:111 msgid "Stitch every node in the path. Stitch length and zig-zag spacing are ignored." msgstr "" -#: lib/elements/stroke.py:144 +#: lib/elements/stroke.py:145 msgid "Legacy running stitch setting detected!\n\n" "It looks like you're using a stroke smaller than 0.5 units to indicate a running stitch, which is deprecated. Instead, please set your stroke to be dashed to indicate running stitch. Any kind of dash will work." msgstr "" @@ -1116,6 +1216,15 @@ msgstr "" msgid "Please chose an other color palette for your design." msgstr "" +#. auto-route running stitch columns extension +#: lib/extensions/auto_run.py:57 lib/extensions/cutwork_segmentation.py:47 +msgid "Please select one or more stroke elements." +msgstr "" + +#: lib/extensions/auto_run.py:62 +msgid "Please select at least one stroke element." +msgstr "" + #: lib/extensions/auto_satin.py:35 msgid "Please ensure that at most one start and end command is attached to the selected satin columns." msgstr "" @@ -1130,15 +1239,15 @@ msgid "Please select at least one satin column." msgstr "" #. This was previously: "No embroiderable paths selected." -#: lib/extensions/base.py:126 +#: lib/extensions/base.py:127 msgid "Ink/Stitch doesn't know how to work with any of the objects you've selected." msgstr "" -#: lib/extensions/base.py:128 +#: lib/extensions/base.py:129 msgid "There are no objects in the entire document that Ink/Stitch knows how to work with." msgstr "" -#: lib/extensions/base.py:130 +#: lib/extensions/base.py:131 msgid "Tip: Run Extensions > Ink/Stitch > Troubleshoot > Troubleshoot Objects" msgstr "" @@ -1182,10 +1291,6 @@ msgstr "" msgid "this satin column does not have a \"satin column cut point\" command attached to it. Please use the \"Attach commands\" extension and attach the \"Satin Column cut point\" command first." msgstr "" -#: lib/extensions/cutwork_segmentation.py:47 -msgid "Please select one or more stroke elements." -msgstr "" - #: lib/extensions/cutwork_segmentation.py:158 msgid "Cutwork Group" msgstr "" @@ -1261,7 +1366,7 @@ msgstr "" msgid "Add trims" msgstr "" -#: lib/extensions/lettering.py:83 lib/extensions/params.py:361 +#: lib/extensions/lettering.py:83 lib/extensions/params.py:441 #: print/templates/custom-page.html:23 print/templates/custom-page.html:27 #: print/templates/custom-page.html:33 print/templates/ui.html:93 #: print/templates/ui.html:97 print/templates/ui.html:103 @@ -1270,7 +1375,7 @@ msgstr "" msgid "Cancel" msgstr "İptal et" -#: lib/extensions/lettering.py:87 lib/extensions/params.py:368 +#: lib/extensions/lettering.py:87 lib/extensions/params.py:449 msgid "Apply and Quit" msgstr "Uygula ve Kapat" @@ -1332,55 +1437,59 @@ msgstr "" msgid "Please select one or more text elements to split lines." msgstr "" -#: lib/extensions/params.py:208 +#: lib/extensions/params.py:227 msgid "These settings will be applied to 1 object." msgstr "Bu ayarlar sadece 1 objeye uygulanacaktır." -#: lib/extensions/params.py:210 +#: lib/extensions/params.py:229 #, python-format msgid "These settings will be applied to %d objects." msgstr "Bu ayarlar sadece %d objeye uygulanacaktır." -#: lib/extensions/params.py:213 +#: lib/extensions/params.py:234 msgid "Some settings had different values across objects. Select a value from the dropdown or enter a new one." msgstr "" -#: lib/extensions/params.py:217 +#: lib/extensions/params.py:239 #, python-format msgid "Disabling this tab will disable the following %d tabs." msgstr "" -#: lib/extensions/params.py:219 +#: lib/extensions/params.py:243 msgid "Disabling this tab will disable the following tab." msgstr "" -#: lib/extensions/params.py:222 +#: lib/extensions/params.py:247 #, python-format msgid "Enabling this tab will disable %s and vice-versa." msgstr "" -#: lib/extensions/params.py:252 +#: lib/extensions/params.py:301 msgid "Inkscape objects" msgstr "Inkscape objeleri" -#: lib/extensions/params.py:313 +#: lib/extensions/params.py:390 msgid "Click to force this parameter to be saved when you click \"Apply and Quit\"" msgstr "" -#: lib/extensions/params.py:321 +#: lib/extensions/params.py:400 msgid "This parameter will be saved when you click \"Apply and Quit\"" msgstr "" -#: lib/extensions/params.py:344 +#: lib/extensions/params.py:423 msgid "Embroidery Params" msgstr "" -#: lib/extensions/params.py:365 +#: lib/extensions/params.py:446 msgid "Use Last Settings" msgstr "En Son Ayarları Kullan" #: lib/extensions/reorder.py:20 -msgid "Please select at least to elements to reorder." +msgid "Please select at least two elements to reorder." +msgstr "" + +#: lib/extensions/selection_to_guide_line.py:21 +msgid "Please select at least one object to be marked as a guide line." msgstr "" #: lib/extensions/selection_to_pattern.py:21 @@ -1641,24 +1750,42 @@ msgstr "" msgid "There is no selected stitchable element. Please run Extensions > Ink/Stitch > Troubleshoot > Troubleshoot objects in case you have expected a stitchout." msgstr "" -#: lib/stitches/auto_satin.py:659 -msgid "Auto-Satin" +#: lib/stitches/auto_run.py:135 +msgid "Auto-Run" +msgstr "" + +#: lib/stitches/auto_run.py:257 +#, python-format +msgid "AutoRun %d" +msgstr "" + +#: lib/stitches/auto_run.py:259 +#, python-format +msgid "AutoRun Underpath %d" +msgstr "" + +#: lib/stitches/auto_satin.py:345 +msgid "Auto-Route" msgstr "" #. Label for a satin column created by Auto-Route Satin Columns and Lettering #. extensions -#: lib/stitches/auto_satin.py:706 +#: lib/stitches/auto_satin.py:516 #, python-format msgid "AutoSatin %d" msgstr "" #. Label for running stitch (underpathing) created by Auto-Route Satin Columns #. amd Lettering extensions -#: lib/stitches/auto_satin.py:709 +#: lib/stitches/auto_satin.py:519 #, python-format msgid "AutoSatin Running Stitch %d" msgstr "" +#: lib/stitches/guided_fill.py:120 +msgid "Guide line (or offset copy) is self crossing!" +msgstr "" + #: lib/svg/rendering.py:222 msgid "Stitch Plan" msgstr "" @@ -2473,14 +2600,63 @@ msgstr "" msgid "Thread Color Management" msgstr "" -#: inx/inkstitch_auto_satin.inx:3 -msgid "Auto-Route Satin Columns" +#: inx/inkstitch_auto_run.inx:3 inx/inkstitch_auto_run.inx:24 +msgid "Autoroute Running Stitch" +msgstr "" + +#: inx/inkstitch_auto_run.inx:10 +msgid "Tools: Stroke" +msgstr "" + +#: inx/inkstitch_auto_run.inx:15 +msgid "Autoroute Running Stitch Options" +msgstr "" + +#: inx/inkstitch_auto_run.inx:17 +msgid "Add nodes at intersections" +msgstr "" + +#: inx/inkstitch_auto_run.inx:19 +msgid "Preserve order of running stitches" msgstr "" -#: inx/inkstitch_auto_satin.inx:5 +#: inx/inkstitch_auto_run.inx:21 inx/inkstitch_auto_satin.inx:5 msgid "Trim jump stitches" msgstr "" +#: inx/inkstitch_auto_run.inx:23 inx/inkstitch_cutwork_segmentation.inx:42 +#: inx/inkstitch_generate_palette.inx:24 inx/inkstitch_palette_to_text.inx:19 +msgid "Help" +msgstr "" + +#: inx/inkstitch_auto_run.inx:25 +msgid "Add nodes at intersections:" +msgstr "" + +#: inx/inkstitch_auto_run.inx:27 +msgid "- Enabled (automatic). Ink/Stitch will add some nodes for better routing. This is the default setting." +msgstr "" + +#: inx/inkstitch_auto_run.inx:29 +msgid "- Disabled (manual). Choose this option if you have manually set nodes at crucial spots." +msgstr "" + +#: inx/inkstitch_auto_run.inx:32 +msgid "Use Start- end end commands to define where auto-routing for running stitch should start and end." +msgstr "" + +#: inx/inkstitch_auto_run.inx:34 +msgid "More info on our website:" +msgstr "" + +#: inx/inkstitch_auto_run.inx:35 +msgid "https://inkstitch.org/docs/stroke-tools#auto-route-running-stitch" +msgstr "" + +#: inx/inkstitch_auto_satin.inx:3 +msgid "Auto-Route Satin Columns" +msgstr "" + #: inx/inkstitch_auto_satin.inx:6 msgid "Preserve order of satin columns" msgstr "" @@ -2488,15 +2664,15 @@ msgstr "" #: inx/inkstitch_auto_satin.inx:12 inx/inkstitch_convert_to_satin.inx:10 #: inx/inkstitch_convert_to_stroke.inx:13 inx/inkstitch_cut_satin.inx:10 #: inx/inkstitch_flip.inx:10 -msgid "Satin Tools" -msgstr "Saten Gereçler" +msgid "Tools: Satin" +msgstr "" #: inx/inkstitch_break_apart.inx:3 msgid "Break Apart Fill Objects" msgstr "" #: inx/inkstitch_break_apart.inx:10 -msgid "Fill Tools" +msgid "Tools: Fill" msgstr "" #: inx/inkstitch_break_apart.inx:17 @@ -2545,7 +2721,7 @@ msgstr "" #: inx/inkstitch_commands_scale_symbols.inx:11 #: inx/inkstitch_global_commands.inx:17 inx/inkstitch_layer_commands.inx:14 -#: inx/inkstitch_object_commands.inx:18 +#: inx/inkstitch_object_commands.inx:20 #: inx/inkstitch_object_commands_toggle_visibility.inx:10 msgid "Commands" msgstr "" @@ -2628,11 +2804,6 @@ msgstr "" msgid "Keep original" msgstr "" -#: inx/inkstitch_cutwork_segmentation.inx:42 -#: inx/inkstitch_generate_palette.inx:24 inx/inkstitch_palette_to_text.inx:19 -msgid "Help" -msgstr "" - #: inx/inkstitch_cutwork_segmentation.inx:43 msgid "This extension separates a path depending on the angle." msgstr "" @@ -2666,6 +2837,7 @@ msgid "Duplicate Params" msgstr "" #: inx/inkstitch_duplicate_params.inx:10 inx/inkstitch_reorder.inx:10 +#: inx/inkstitch_selection_to_guide_line.inx:10 #: inx/inkstitch_selection_to_pattern.inx:10 msgid "Edit" msgstr "" @@ -3627,6 +3799,14 @@ msgstr "" msgid "Re-stack objects in order of selection" msgstr "" +#: inx/inkstitch_selection_to_guide_line.inx:3 +msgid "Selection to guide line" +msgstr "" + +#: inx/inkstitch_selection_to_guide_line.inx:9 +msgid "Ink/Stitch" +msgstr "" + #: inx/inkstitch_selection_to_pattern.inx:3 msgid "Selection to pattern" msgstr "" |