diff options
Diffstat (limited to 'translations/messages_uk_UA.po')
| -rw-r--r-- | translations/messages_uk_UA.po | 296 |
1 files changed, 148 insertions, 148 deletions
diff --git a/translations/messages_uk_UA.po b/translations/messages_uk_UA.po index ba0f5cda..8c8ccae2 100644 --- a/translations/messages_uk_UA.po +++ b/translations/messages_uk_UA.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2023-05-09 01:17+0000\n" -"PO-Revision-Date: 2023-05-10 01:16\n" +"POT-Creation-Date: 2023-05-11 01:15+0000\n" +"PO-Revision-Date: 2023-05-12 01:18\n" "Last-Translator: \n" "Language-Team: Ukrainian\n" "MIME-Version: 1.0\n" @@ -16,7 +16,7 @@ msgstr "" "Project-Id-Version: \n" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-09 01:17+0000\n" +"POT-Creation-Date: 2023-05-11 01:15+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: \n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -959,7 +959,7 @@ msgid "If you'd like to help please\n" "- create a new issue at https://github.com/inkstitch/inkstitch/issues" msgstr "" -#: inkstitch.py:107 lib/elements/fill_stitch.py:907 +#: inkstitch.py:107 lib/elements/fill_stitch.py:905 msgid "Include the error description and also (if possible) the svg file." msgstr "" @@ -1267,380 +1267,380 @@ msgstr "" msgid "* Run Extensions > Ink/Stitch > Troubleshoot > Cleanup Document..." msgstr "* Виберіть: Розширення > Ink/Stitch > Вирішення проблем > Очистка Дизайна..." -#: lib/elements/fill_stitch.py:35 +#: lib/elements/fill_stitch.py:36 msgid "Small Fill" msgstr "Дрібне заповнення" -#: lib/elements/fill_stitch.py:36 +#: lib/elements/fill_stitch.py:37 msgid "This fill object is so small that it would probably look better as running stitch or satin column. For very small shapes, fill stitch is not possible, and Ink/Stitch will use running stitch around the outline instead." msgstr "Цей об'єкт із заповненням настільки малий, що він, мабуть, буде виглядати краще як його виконати стібком або атласною колонкою. Для дуже маленьких форм заповнення неможливо, а Ink/Stitch застосує стібок по контуру." -#: lib/elements/fill_stitch.py:42 lib/elements/fill_stitch.py:222 +#: lib/elements/fill_stitch.py:43 lib/elements/fill_stitch.py:223 msgid "Expand" msgstr "Розширити" -#: lib/elements/fill_stitch.py:43 +#: lib/elements/fill_stitch.py:44 msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead." msgstr "Параметр розширення не можна застосувати для цього об'єкта гладі. Замість нього Ink/Stitch буде використовувати оригінальний розмір." -#: lib/elements/fill_stitch.py:48 lib/elements/fill_stitch.py:461 +#: lib/elements/fill_stitch.py:49 lib/elements/fill_stitch.py:462 msgid "Inset" msgstr "Вставки" -#: lib/elements/fill_stitch.py:49 +#: lib/elements/fill_stitch.py:50 msgid "The underlay inset parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use the original size instead." msgstr "Параметр відступу попереднього прошиття не можна застосувати для цього об'єкта гладі. Замість нього Ink/Stitch буде використовувати оригінальний розмір." -#: lib/elements/fill_stitch.py:54 +#: lib/elements/fill_stitch.py:55 msgid "Missing Guideline" msgstr "" -#: lib/elements/fill_stitch.py:55 +#: lib/elements/fill_stitch.py:56 msgid "This object is set to \"Guided Fill\", but has no guide line." msgstr "" -#: lib/elements/fill_stitch.py:57 +#: lib/elements/fill_stitch.py:58 msgid "* Create a stroke object" msgstr "" -#: lib/elements/fill_stitch.py:58 +#: lib/elements/fill_stitch.py:59 msgid "* Select this object and run Extensions > Ink/Stitch > Edit > Selection to guide line" msgstr "" -#: lib/elements/fill_stitch.py:63 +#: lib/elements/fill_stitch.py:64 msgid "Disjointed Guide Line" msgstr "" -#: lib/elements/fill_stitch.py:64 +#: lib/elements/fill_stitch.py:65 msgid "The guide line of this object isn't within the object borders. The guide line works best, if it is within the target element." msgstr "" -#: lib/elements/fill_stitch.py:67 +#: lib/elements/fill_stitch.py:68 msgid "* Move the guide line into the element" msgstr "" -#: lib/elements/fill_stitch.py:72 lib/elements/stroke.py:25 +#: lib/elements/fill_stitch.py:73 lib/elements/stroke.py:27 msgid "Multiple Guide Lines" msgstr "" -#: lib/elements/fill_stitch.py:73 lib/elements/stroke.py:26 +#: lib/elements/fill_stitch.py:74 lib/elements/stroke.py:28 msgid "This object has multiple guide lines, but only the first one will be used." msgstr "" -#: lib/elements/fill_stitch.py:75 lib/elements/stroke.py:28 +#: lib/elements/fill_stitch.py:76 lib/elements/stroke.py:30 msgid "* Remove all guide lines, except for one." msgstr "" -#: lib/elements/fill_stitch.py:80 +#: lib/elements/fill_stitch.py:81 msgid "Unconnected" msgstr "Нез'єднані" -#: lib/elements/fill_stitch.py:81 +#: lib/elements/fill_stitch.py:82 msgid "Fill: This object is made up of unconnected shapes. Ink/Stitch doesn't know what order to stitch them in. Please break this object up into separate shapes." msgstr "" -#: lib/elements/fill_stitch.py:85 lib/elements/fill_stitch.py:94 -#: lib/elements/fill_stitch.py:102 +#: lib/elements/fill_stitch.py:86 lib/elements/fill_stitch.py:95 +#: lib/elements/fill_stitch.py:103 msgid "* Extensions > Ink/Stitch > Fill Tools > Break Apart Fill Objects" msgstr "* Розширення > Ink/Stitch > Інструменти гладі > Розбити об'єкти заливок" -#: lib/elements/fill_stitch.py:90 +#: lib/elements/fill_stitch.py:91 msgid "Border crosses itself" msgstr "Границі пересікають самі себе" -#: lib/elements/fill_stitch.py:91 +#: lib/elements/fill_stitch.py:92 msgid "Fill: The border crosses over itself. This may lead into unconnected shapes. Please break this object into separate shapes to indicate in which order it should be stitched in." msgstr "" -#: lib/elements/fill_stitch.py:99 +#: lib/elements/fill_stitch.py:100 msgid "This shape is invalid" msgstr "" -#: lib/elements/fill_stitch.py:100 +#: lib/elements/fill_stitch.py:101 msgid "Fill: This shape cannot be stitched out. Please try to repair it with the \"Break Apart Fill Objects\" extension." msgstr "" -#: lib/elements/fill_stitch.py:107 +#: lib/elements/fill_stitch.py:108 msgid "FillStitch" msgstr "" -#: lib/elements/fill_stitch.py:110 +#: lib/elements/fill_stitch.py:111 msgid "Automatically routed fill stitching" msgstr "Автоматично прокладене заповнення" -#: lib/elements/fill_stitch.py:114 +#: lib/elements/fill_stitch.py:115 msgid "Auto Fill" msgstr "" -#: lib/elements/fill_stitch.py:115 inx/inkstitch_select_elements.inx:37 +#: lib/elements/fill_stitch.py:116 inx/inkstitch_select_elements.inx:37 msgid "Contour Fill" msgstr "" -#: lib/elements/fill_stitch.py:116 inx/inkstitch_select_elements.inx:38 +#: lib/elements/fill_stitch.py:117 inx/inkstitch_select_elements.inx:38 msgid "Guided Fill" msgstr "" -#: lib/elements/fill_stitch.py:117 inx/inkstitch_select_elements.inx:39 +#: lib/elements/fill_stitch.py:118 inx/inkstitch_select_elements.inx:39 msgid "Meander Fill" msgstr "" -#: lib/elements/fill_stitch.py:118 inx/inkstitch_select_elements.inx:40 +#: lib/elements/fill_stitch.py:119 inx/inkstitch_select_elements.inx:40 msgid "Circular Fill" msgstr "" -#: lib/elements/fill_stitch.py:119 inx/inkstitch_select_elements.inx:41 +#: lib/elements/fill_stitch.py:120 inx/inkstitch_select_elements.inx:41 msgid "Legacy Fill" msgstr "" -#: lib/elements/fill_stitch.py:123 +#: lib/elements/fill_stitch.py:124 msgid "Fill method" msgstr "" -#: lib/elements/fill_stitch.py:132 +#: lib/elements/fill_stitch.py:133 msgid "Guided Fill Strategy" msgstr "" -#: lib/elements/fill_stitch.py:133 +#: lib/elements/fill_stitch.py:134 msgid "Copy" msgstr "" -#: lib/elements/fill_stitch.py:133 +#: lib/elements/fill_stitch.py:134 msgid "Parallel Offset" msgstr "" -#: lib/elements/fill_stitch.py:134 +#: lib/elements/fill_stitch.py:135 msgid "Copy (the default) will fill the shape with shifted copies of the line. Parallel offset will ensure that each line is always a consistent distance from its neighbor. Sharp corners may be introduced." msgstr "" -#: lib/elements/fill_stitch.py:141 +#: lib/elements/fill_stitch.py:142 msgid "Contour Fill Strategy" msgstr "" -#: lib/elements/fill_stitch.py:142 +#: lib/elements/fill_stitch.py:143 msgid "Inner to Outer" msgstr "" -#: lib/elements/fill_stitch.py:142 +#: lib/elements/fill_stitch.py:143 msgid "Single spiral" msgstr "" -#: lib/elements/fill_stitch.py:142 +#: lib/elements/fill_stitch.py:143 msgid "Double spiral" msgstr "" -#: lib/elements/fill_stitch.py:147 +#: lib/elements/fill_stitch.py:148 msgid "Join Style" msgstr "" -#: lib/elements/fill_stitch.py:148 +#: lib/elements/fill_stitch.py:149 msgid "Round" msgstr "" -#: lib/elements/fill_stitch.py:148 +#: lib/elements/fill_stitch.py:149 msgid "Mitered" msgstr "" -#: lib/elements/fill_stitch.py:148 +#: lib/elements/fill_stitch.py:149 msgid "Beveled" msgstr "" -#: lib/elements/fill_stitch.py:154 +#: lib/elements/fill_stitch.py:155 msgid "Avoid self-crossing" msgstr "" -#: lib/elements/fill_stitch.py:163 +#: lib/elements/fill_stitch.py:164 msgid "Clockwise" msgstr "" -#: lib/elements/fill_stitch.py:168 +#: lib/elements/fill_stitch.py:169 msgid "Meander Pattern" msgstr "" -#: lib/elements/fill_stitch.py:175 +#: lib/elements/fill_stitch.py:176 msgid "Meander pattern angle" msgstr "" -#: lib/elements/fill_stitch.py:185 +#: lib/elements/fill_stitch.py:186 msgid "Meander pattern scale" msgstr "" -#: lib/elements/fill_stitch.py:186 +#: lib/elements/fill_stitch.py:187 msgid "Percentage to stretch or compress the meander pattern. You can scale horizontally and vertically individually by giving two percentages separated by a space. " msgstr "" -#: lib/elements/fill_stitch.py:196 +#: lib/elements/fill_stitch.py:197 msgid "Clip path" msgstr "" -#: lib/elements/fill_stitch.py:197 +#: lib/elements/fill_stitch.py:198 msgid "Constrain stitching to the shape. Useful when smoothing and expand are used." msgstr "" -#: lib/elements/fill_stitch.py:206 +#: lib/elements/fill_stitch.py:207 msgid "Smoothness" msgstr "" -#: lib/elements/fill_stitch.py:207 +#: lib/elements/fill_stitch.py:208 msgid "Smooth the stitch path. Smoothness limits how far the smoothed stitch path is allowed to deviate from the original path. Try low numbers like 0.2. Hint: a lower running stitch tolerance may be needed too." msgstr "" -#: lib/elements/fill_stitch.py:223 +#: lib/elements/fill_stitch.py:224 msgid "Expand the shape before fill stitching, to compensate for gaps between shapes. Negative values contract instead." msgstr "" -#: lib/elements/fill_stitch.py:237 +#: lib/elements/fill_stitch.py:238 msgid "Angle of lines of stitches" msgstr "Кут стібків" -#: lib/elements/fill_stitch.py:238 +#: lib/elements/fill_stitch.py:239 msgid "The angle increases in a counter-clockwise direction. 0 is horizontal. Negative angles are allowed." msgstr "Кут збільшується в напрямку проти годинникової стрілки. 0 - горизонтальний. Дозволені негативні кути." -#: lib/elements/fill_stitch.py:250 +#: lib/elements/fill_stitch.py:251 msgid "Maximum fill stitch length" msgstr "Максимальна довжина стібка заповнення" -#: lib/elements/fill_stitch.py:251 +#: lib/elements/fill_stitch.py:252 msgid "The length of each stitch in a row. Shorter stitch may be used at the start or end of a row." msgstr "Довжина кожного стібка підряд. Більш короткі стібки можна використовувати на початку або в кінці ряду." -#: lib/elements/fill_stitch.py:266 +#: lib/elements/fill_stitch.py:267 msgid "Spacing between rows" msgstr "Відстань між рядами" -#: lib/elements/fill_stitch.py:267 +#: lib/elements/fill_stitch.py:268 msgid "Distance between rows of stitches." msgstr "Відстань між рядами стібків." -#: lib/elements/fill_stitch.py:282 inx/inkstitch_gradient_blocks.inx:19 +#: lib/elements/fill_stitch.py:283 inx/inkstitch_gradient_blocks.inx:19 msgid "End row spacing" msgstr "" -#: lib/elements/fill_stitch.py:283 +#: lib/elements/fill_stitch.py:284 msgid "Increases or decreases the row spacing towards the end." msgstr "" -#: lib/elements/fill_stitch.py:297 +#: lib/elements/fill_stitch.py:298 msgid "Stagger rows this many times before repeating" msgstr "Повторний рядок це багато разів, перш ніж повторити" -#: lib/elements/fill_stitch.py:298 +#: lib/elements/fill_stitch.py:299 msgid "Length of the cycle by which successive stitch rows are staggered. Fractional values are allowed and can have less visible diagonals than integer values." msgstr "" -#: lib/elements/fill_stitch.py:310 lib/elements/fill_stitch.py:473 +#: lib/elements/fill_stitch.py:311 lib/elements/fill_stitch.py:474 msgid "Skip last stitch in each row" msgstr "Пропустіть останній стібок у кожному ряду" -#: lib/elements/fill_stitch.py:311 lib/elements/fill_stitch.py:474 +#: lib/elements/fill_stitch.py:312 lib/elements/fill_stitch.py:475 msgid "The last stitch in each row is quite close to the first stitch in the next row. Skipping it decreases stitch count and density." msgstr "Останній стібок у кожному ряду досить близький до першого стібка в наступному ряду. Пропускаючи його, зменшується кількість швів і щільність." -#: lib/elements/fill_stitch.py:324 +#: lib/elements/fill_stitch.py:325 msgid "Flip fill (start right-to-left)" msgstr "Віддзеркалити заповнення (почати справа наліво)" -#: lib/elements/fill_stitch.py:325 +#: lib/elements/fill_stitch.py:326 msgid "The flip option can help you with routing your stitch path. When you enable flip, stitching goes from right-to-left instead of left-to-right." msgstr "Віддзеркалення може допомогти вам в маршрутизації вашого контуру стібка. Коли ви вмикаєте віддзеркалення, зшивання рухається справа наліво, а не зліва направо." -#: lib/elements/fill_stitch.py:336 lib/elements/fill_stitch.py:485 +#: lib/elements/fill_stitch.py:337 lib/elements/fill_stitch.py:486 msgid "Underpath" msgstr "Нижні переходи" -#: lib/elements/fill_stitch.py:337 lib/elements/fill_stitch.py:486 +#: lib/elements/fill_stitch.py:338 lib/elements/fill_stitch.py:487 msgid "Travel inside the shape when moving from section to section. Underpath stitches avoid traveling in the direction of the row angle so that they are not visible. This gives them a jagged appearance." msgstr "Переміщення всередині контуру при переході від секції до секції. Рядок переходів під гладдю або прострочкою уникає напрямків рядів, тому її не видно. Це робить поверхню гладі трохи нерівною." -#: lib/elements/fill_stitch.py:349 lib/elements/stroke.py:97 +#: lib/elements/fill_stitch.py:350 lib/elements/stroke.py:99 msgid "Running stitch length" msgstr "Довжина стіжка по лінії" -#: lib/elements/fill_stitch.py:350 +#: lib/elements/fill_stitch.py:351 msgid "Length of stitches around the outline of the fill region used when moving from section to section. Also used for meander and circular fill." msgstr "" -#: lib/elements/fill_stitch.py:365 +#: lib/elements/fill_stitch.py:366 msgid "Running stitch tolerance" msgstr "" -#: lib/elements/fill_stitch.py:366 +#: lib/elements/fill_stitch.py:367 msgid "All stitches must be within this distance of the path. A lower tolerance means stitches will be closer together. A higher tolerance means sharp corners may be rounded." msgstr "" -#: lib/elements/fill_stitch.py:378 lib/elements/satin_column.py:353 -#: lib/elements/stroke.py:71 +#: lib/elements/fill_stitch.py:379 lib/elements/satin_column.py:353 +#: lib/elements/stroke.py:73 msgid "Repeats" msgstr "Повтори прострочки" -#: lib/elements/fill_stitch.py:379 lib/elements/stroke.py:72 +#: lib/elements/fill_stitch.py:380 lib/elements/stroke.py:74 msgid "Defines how many times to run down and back along the path." msgstr "Визначає скільки разів потрібно пройти про стрічці вперед і назад." -#: lib/elements/fill_stitch.py:390 lib/elements/stroke.py:83 +#: lib/elements/fill_stitch.py:391 lib/elements/stroke.py:85 msgid "Bean stitch number of repeats" msgstr "Бобова вишивка кількість повторень" -#: lib/elements/fill_stitch.py:391 lib/elements/stroke.py:84 +#: lib/elements/fill_stitch.py:392 lib/elements/stroke.py:86 msgid "Backtrack each stitch this many times. A value of 1 would triple each stitch (forward, back, forward). A value of 2 would quintuple each stitch, etc.\n\n" "A pattern with various repeats can be created with a list of values separated by a space." msgstr "" -#: lib/elements/fill_stitch.py:409 inx/inkstitch_select_elements.inx:43 +#: lib/elements/fill_stitch.py:410 inx/inkstitch_select_elements.inx:43 #: inx/inkstitch_select_elements.inx:45 msgid "Underlay" msgstr "Підкладка" -#: lib/elements/fill_stitch.py:409 lib/elements/fill_stitch.py:418 -#: lib/elements/fill_stitch.py:443 lib/elements/fill_stitch.py:454 -#: lib/elements/fill_stitch.py:464 lib/elements/fill_stitch.py:476 -#: lib/elements/fill_stitch.py:489 +#: lib/elements/fill_stitch.py:410 lib/elements/fill_stitch.py:419 +#: lib/elements/fill_stitch.py:444 lib/elements/fill_stitch.py:455 +#: lib/elements/fill_stitch.py:465 lib/elements/fill_stitch.py:477 +#: lib/elements/fill_stitch.py:490 msgid "Fill Underlay" msgstr "" -#: lib/elements/fill_stitch.py:415 +#: lib/elements/fill_stitch.py:416 msgid "Fill angle" msgstr "Кут заповнення" -#: lib/elements/fill_stitch.py:416 +#: lib/elements/fill_stitch.py:417 msgid "Default: fill angle + 90 deg. Insert a list for multiple layers separated by a space." msgstr "" -#: lib/elements/fill_stitch.py:440 +#: lib/elements/fill_stitch.py:441 msgid "Row spacing" msgstr "Міжрядковий інтервал" -#: lib/elements/fill_stitch.py:441 +#: lib/elements/fill_stitch.py:442 msgid "default: 3x fill row spacing" msgstr "типовий: 3-кратний проміжок між рядками" -#: lib/elements/fill_stitch.py:451 lib/elements/stroke.py:123 +#: lib/elements/fill_stitch.py:452 lib/elements/stroke.py:125 msgid "Max stitch length" msgstr "Максимальна довжина стібка" -#: lib/elements/fill_stitch.py:452 +#: lib/elements/fill_stitch.py:453 msgid "default: equal to fill max stitch length" msgstr "типовий: дорівнює максимальній довжині стібка" -#: lib/elements/fill_stitch.py:462 +#: lib/elements/fill_stitch.py:463 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill." msgstr "Перед тим, як робити підкладку, стисніть форму, щоб запобігти появі підкладки навколо зовнішньої сторони заповнення." -#: lib/elements/fill_stitch.py:497 lib/elements/satin_column.py:434 +#: lib/elements/fill_stitch.py:498 lib/elements/satin_column.py:434 msgid "Random seed" msgstr "" -#: lib/elements/fill_stitch.py:498 lib/elements/satin_column.py:435 +#: lib/elements/fill_stitch.py:499 lib/elements/satin_column.py:435 msgid "Use a specific seed for randomized attributes. Uses the element ID if empty." msgstr "" -#: lib/elements/fill_stitch.py:899 +#: lib/elements/fill_stitch.py:897 msgid "Error during autofill! This means it is a bug in Ink/Stitch." msgstr "" #. this message is followed by a URL: #. https://github.com/inkstitch/inkstitch/issues/new -#: lib/elements/fill_stitch.py:902 +#: lib/elements/fill_stitch.py:900 msgid "If you'd like to help please\n" "- copy the entire error message below\n" "- save your SVG file and\n" @@ -1800,7 +1800,7 @@ msgstr "Спеціальна сатинова колонка" msgid "\"E\" Stitch" msgstr "" -#: lib/elements/satin_column.py:88 lib/elements/stroke.py:61 +#: lib/elements/satin_column.py:88 lib/elements/stroke.py:63 #: inx/inkstitch_break_apart.inx:17 msgid "Method" msgstr "" @@ -1877,7 +1877,7 @@ msgstr "" msgid "Inset stitches if the distance between stitches is smaller than this." msgstr "" -#: lib/elements/satin_column.py:189 lib/elements/stroke.py:137 +#: lib/elements/satin_column.py:189 lib/elements/stroke.py:139 msgid "Zig-zag spacing (peak-to-peak)" msgstr "Щільність зигзага (відстань між піками)" @@ -1893,7 +1893,7 @@ msgstr "" msgid "Additional pull compensation which varies as a percentage of stitch width. Two values separated by a space may be used for an aysmmetric effect." msgstr "" -#: lib/elements/satin_column.py:217 lib/elements/stroke.py:150 +#: lib/elements/satin_column.py:217 lib/elements/stroke.py:152 msgid "Pull compensation" msgstr "Компенсації розтягування" @@ -2022,179 +2022,179 @@ msgstr "" msgid "Split stitch if distance of maximum stitch length is exceeded" msgstr "" -#: lib/elements/stroke.py:33 +#: lib/elements/stroke.py:35 msgid "Stroke" msgstr "Лінія" -#: lib/elements/stroke.py:36 +#: lib/elements/stroke.py:38 msgid "Running stitch along paths" msgstr "Вишивка вздовж шляхів" -#: lib/elements/stroke.py:54 +#: lib/elements/stroke.py:56 msgid "Running Stitch / Bean Stitch" msgstr "" -#: lib/elements/stroke.py:55 +#: lib/elements/stroke.py:57 msgid "Ripple Stitch" msgstr "" -#: lib/elements/stroke.py:56 inx/inkstitch_select_elements.inx:21 +#: lib/elements/stroke.py:58 inx/inkstitch_select_elements.inx:21 msgid "ZigZag Stitch" msgstr "" -#: lib/elements/stroke.py:57 inx/inkstitch_select_elements.inx:22 +#: lib/elements/stroke.py:59 inx/inkstitch_select_elements.inx:22 msgid "Manual Stitch" msgstr "" -#: lib/elements/stroke.py:98 +#: lib/elements/stroke.py:100 msgid "Length of stitches. Stitches can be shorter according to the stitch tolerance setting." msgstr "" -#: lib/elements/stroke.py:109 +#: lib/elements/stroke.py:111 msgid "Stitch tolerance" msgstr "" -#: lib/elements/stroke.py:110 +#: lib/elements/stroke.py:112 msgid "All stitches must be within this distance from the path. A lower tolerance means stitches will be closer together. A higher tolerance means sharp corners may be rounded." msgstr "" -#: lib/elements/stroke.py:124 +#: lib/elements/stroke.py:126 msgid "Split stitches longer than this." msgstr "" -#: lib/elements/stroke.py:138 +#: lib/elements/stroke.py:140 msgid "Length of stitches in zig-zag mode." msgstr "Довжина стіжків у режимі прострочки зигзагом." -#: lib/elements/stroke.py:151 +#: lib/elements/stroke.py:153 msgid "Zigzag stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This widens the zigzag line width." msgstr "" -#: lib/elements/stroke.py:164 +#: lib/elements/stroke.py:166 msgid "Number of lines" msgstr "" -#: lib/elements/stroke.py:165 +#: lib/elements/stroke.py:167 msgid "Number of lines from start to finish" msgstr "" -#: lib/elements/stroke.py:176 +#: lib/elements/stroke.py:178 msgid "Minimum line distance" msgstr "" -#: lib/elements/stroke.py:177 +#: lib/elements/stroke.py:179 msgid "Overrides the number of lines setting." msgstr "" -#: lib/elements/stroke.py:191 +#: lib/elements/stroke.py:193 msgid "Stagger lines this many times before repeating" msgstr "" -#: lib/elements/stroke.py:192 +#: lib/elements/stroke.py:194 msgid "Length of the cycle by which successive stitch lines are staggered. Fractional values are allowed and can have less visible diagonals than integer values. For linear ripples only." msgstr "" -#: lib/elements/stroke.py:204 +#: lib/elements/stroke.py:206 msgid "Skip first lines" msgstr "" -#: lib/elements/stroke.py:205 +#: lib/elements/stroke.py:207 msgid "Skip this number of lines at the beginning." msgstr "" -#: lib/elements/stroke.py:216 +#: lib/elements/stroke.py:218 msgid "Skip last lines" msgstr "" -#: lib/elements/stroke.py:217 +#: lib/elements/stroke.py:219 msgid "Skip this number of lines at the end" msgstr "" -#: lib/elements/stroke.py:228 +#: lib/elements/stroke.py:230 msgid "Line distance exponent" msgstr "" -#: lib/elements/stroke.py:229 +#: lib/elements/stroke.py:231 msgid "Increase density towards one side." msgstr "" -#: lib/elements/stroke.py:240 +#: lib/elements/stroke.py:242 msgid "Flip exponent" msgstr "" -#: lib/elements/stroke.py:241 +#: lib/elements/stroke.py:243 msgid "Reverse exponent effect." msgstr "" -#: lib/elements/stroke.py:252 +#: lib/elements/stroke.py:254 msgid "Reverse" msgstr "" -#: lib/elements/stroke.py:253 +#: lib/elements/stroke.py:255 msgid "Flip start and end point" msgstr "" -#: lib/elements/stroke.py:264 +#: lib/elements/stroke.py:266 msgid "Grid size" msgstr "" -#: lib/elements/stroke.py:265 +#: lib/elements/stroke.py:267 msgid "Render as grid. Use with care and watch your stitch density." msgstr "" -#: lib/elements/stroke.py:277 +#: lib/elements/stroke.py:279 msgid "Scale axis" msgstr "" -#: lib/elements/stroke.py:278 +#: lib/elements/stroke.py:280 msgid "Scale axis for satin guided ripple stitches." msgstr "" -#: lib/elements/stroke.py:282 print/templates/ui.html:181 +#: lib/elements/stroke.py:284 print/templates/ui.html:181 msgid "None" msgstr "Жоден" -#: lib/elements/stroke.py:290 +#: lib/elements/stroke.py:292 msgid "Starting scale" msgstr "" -#: lib/elements/stroke.py:291 +#: lib/elements/stroke.py:293 msgid "How big the first copy of the line should be, in percent." msgstr "" -#: lib/elements/stroke.py:291 lib/elements/stroke.py:303 +#: lib/elements/stroke.py:293 lib/elements/stroke.py:305 msgid "Used only for ripple stitch with a guide line." msgstr "" -#: lib/elements/stroke.py:302 +#: lib/elements/stroke.py:304 msgid "Ending scale" msgstr "" -#: lib/elements/stroke.py:303 +#: lib/elements/stroke.py:305 msgid "How big the last copy of the line should be, in percent." msgstr "" -#: lib/elements/stroke.py:314 +#: lib/elements/stroke.py:316 msgid "Rotate" msgstr "" -#: lib/elements/stroke.py:315 +#: lib/elements/stroke.py:317 msgid "Rotate satin guided ripple stitches" msgstr "" -#: lib/elements/stroke.py:326 +#: lib/elements/stroke.py:328 msgid "Join style" msgstr "" -#: lib/elements/stroke.py:327 +#: lib/elements/stroke.py:329 msgid "Join style for non circular ripples." msgstr "" -#: lib/elements/stroke.py:330 +#: lib/elements/stroke.py:332 msgid "flat" msgstr "" -#: lib/elements/stroke.py:330 +#: lib/elements/stroke.py:332 msgid "point" msgstr "" |