From 6a16e90081e619eac5921bd8614c0c46dc83f852 Mon Sep 17 00:00:00 2001 From: Ink/Stitch Crowdin integration Date: Sat, 25 Aug 2018 13:55:51 +0000 Subject: new translations from Crowdin --- translations/messages_de_DE.po | 255 ++++++++++++++++++++++++++--------------- 1 file changed, 165 insertions(+), 90 deletions(-) (limited to 'translations/messages_de_DE.po') diff --git a/translations/messages_de_DE.po b/translations/messages_de_DE.po index 37326301..67755378 100644 --- a/translations/messages_de_DE.po +++ b/translations/messages_de_DE.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2018-08-20 20:42-0400\n" -"PO-Revision-Date: 2018-08-24 13:55\n" +"POT-Creation-Date: 2018-08-24 20:56-0400\n" +"PO-Revision-Date: 2018-08-25 13:55\n" "Last-Translator: lexelby \n" "Language-Team: German\n" "MIME-Version: 1.0\n" @@ -18,35 +18,92 @@ msgstr "" "Language: de_DE\n" #. command attached to an object -#: lib/commands.py:11 +#: lib/commands.py:13 +msgid "fill_start" +msgstr "" + +#: lib/commands.py:13 msgid "Fill stitch starting position" msgstr "Füllstich Startposition" #. command attached to an object -#: lib/commands.py:14 +#: lib/commands.py:16 +msgid "fill_end" +msgstr "" + +#: lib/commands.py:16 msgid "Fill stitch ending position" msgstr "Füllstich Endposition" #. command attached to an object -#: lib/commands.py:17 +#: lib/commands.py:19 +msgid "stop" +msgstr "" + +#: lib/commands.py:19 msgid "Stop (pause machine) after sewing this object" msgstr "Stoppen (Pause) nach dem Nähen diesem Objekts" #. command attached to an object -#: lib/commands.py:20 +#: lib/commands.py:22 +msgid "trim" +msgstr "" + +#: lib/commands.py:22 msgid "Trim thread after sewing this object" msgstr "Faden abschneiden nach diesem Objekt" #. command attached to an object -#: lib/commands.py:23 +#: lib/commands.py:25 +msgid "ignore_object" +msgstr "" + +#: lib/commands.py:25 msgid "Ignore this object (do not stitch)" msgstr "Ignoriere dieses Objekt (nicht nähen)" -#. command that affects entire layer -#: lib/commands.py:26 +#. command that affects a layer +#: lib/commands.py:28 +msgid "ignore_layer" +msgstr "" + +#: lib/commands.py:28 msgid "Ignore layer (do not stitch any objects in this layer)" msgstr "Ebene ignorieren (keine Objekte in dieser Ebene nähen)" +#. command that affects entire document +#: lib/commands.py:31 +msgid "origin" +msgstr "" + +#: lib/commands.py:31 +msgid "Origin for exported embroidery files" +msgstr "" + +#. command that affects entire document +#: lib/commands.py:34 +msgid "stop_position" +msgstr "" + +#: lib/commands.py:34 +msgid "Jump destination for Stop commands (a.k.a. \"Frame Out position\")." +msgstr "" + +#: lib/commands.py:190 +#, python-format +msgid "Error: there is more than one %(command)s command in the document, but there can only be one. Please remove all but one." +msgstr "" + +#. This is a continuation of the previous error message, letting the user know +#. what command we're talking about since we don't normally expose the actual +#. command name to them. Contents of %(description)s are in a separate +#. translation +#. string. +#: lib/commands.py:197 +#, python-format +msgid "%(command)s: %(description)s" +msgstr "" + #: lib/elements/auto_fill.py:11 msgid "Auto-Fill" msgstr "Auto-Füllung" @@ -113,7 +170,7 @@ msgstr "Erweitern" msgid "Expand the shape before fill stitching, to compensate for gaps between shapes." msgstr "Erweitern Sie die Form vor dem Füllstich, um Lücken zwischen den Formen auszugleichen." -#: lib/elements/element.py:232 +#: lib/elements/element.py:230 #, python-format msgid "%(id)s has more than one command of type '%(command)s' linked to it" msgstr "%(id)s beinhaltet mehr als einen Befehl vom Typ '%(command)s'" @@ -138,39 +195,39 @@ msgstr "Winkel der Stichlinien" msgid "The angle increases in a counter-clockwise direction. 0 is horizontal. Negative angles are allowed." msgstr "Der Winkel nimmt gegen den Uhrzeigersinn zu. 0 ist horizontal. Negative Winkel sind erlaubt." -#: lib/elements/fill.py:45 +#: lib/elements/fill.py:46 msgid "Flip fill (start right-to-left)" msgstr "Rückwärtsfüllung (von rechts nach links)" -#: lib/elements/fill.py:46 +#: lib/elements/fill.py:47 msgid "The flip option can help you with routing your stitch path. When you enable flip, stitching goes from right-to-left instead of left-to-right." msgstr "Die Flip-Option kann Ihnen bei der Reihenfolge des Stichpfads helfen. Wenn Umdrehen aktiviert wird, wird das Sticken von rechts nach links anstatt von links nach rechts ausgeführt." -#: lib/elements/fill.py:54 +#: lib/elements/fill.py:56 msgid "Spacing between rows" msgstr "Reihenabstand" -#: lib/elements/fill.py:55 +#: lib/elements/fill.py:57 msgid "Distance between rows of stitches." msgstr "Abstand zwischen den Stichreihen." -#: lib/elements/fill.py:68 +#: lib/elements/fill.py:70 msgid "Maximum fill stitch length" msgstr "Maximale Füll-Stichlänge" -#: lib/elements/fill.py:69 +#: lib/elements/fill.py:71 msgid "The length of each stitch in a row. Shorter stitch may be used at the start or end of a row." msgstr "Die Stichlänge in einer Reihe. Ein kürzerer Stich kann am Anfang oder am Ende einer Reihe verwendet werden." -#: lib/elements/fill.py:78 +#: lib/elements/fill.py:80 msgid "Stagger rows this many times before repeating" msgstr "Wieviele Reihen bis sich das Muster wiederholt" -#: lib/elements/fill.py:79 +#: lib/elements/fill.py:81 msgid "Setting this dictates how many rows apart the stitches will be before they fall in the same column position." msgstr "Die Einstellung bestimmt, wie viele Reihen die Stiche voneinander entfernt sind, bevor sie in die gleiche Kolumne münden." -#: lib/elements/fill.py:112 +#: lib/elements/fill.py:114 #, python-format msgid "shape %s is so small that it cannot be filled with stitches. Please make it bigger or delete it." msgstr "Die Form %s ist zu klein, dass sie nicht mit Stichen gefüllt werden kann. Bitte vergrößere oder lösche diese." @@ -187,7 +244,7 @@ msgstr "Benutzerdefinierte Satinkolumne" msgid "\"E\" stitch" msgstr "\"E\" Stich" -#: lib/elements/satin_column.py:32 lib/elements/stroke.py:52 +#: lib/elements/satin_column.py:32 lib/elements/stroke.py:55 msgid "Zig-zag spacing (peak-to-peak)" msgstr "Zick-Zack Abstand (Spitze zu Spitze)" @@ -195,95 +252,95 @@ msgstr "Zick-Zack Abstand (Spitze zu Spitze)" msgid "Peak-to-peak distance between zig-zags." msgstr "Spitze-zu-Spitze-Abstand zwischen Zick-Zacks." -#: lib/elements/satin_column.py:43 +#: lib/elements/satin_column.py:44 msgid "Pull compensation" msgstr "Zugausgleich" -#: lib/elements/satin_column.py:44 +#: lib/elements/satin_column.py:45 msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This setting expands each pair of needle penetrations outward from the center of the satin column." msgstr "Satinstiche ziehen den Stoff zusammen, was zu einer schmaleren Kolumne führt, als Sie in Inkscape zeichnen. Diese Einstellung erweitert jedes Stichpaar von der Mitte der Satinkolumne nach außen." -#: lib/elements/satin_column.py:55 +#: lib/elements/satin_column.py:57 msgid "Contour underlay" msgstr "Konturunterlage" -#: lib/elements/satin_column.py:55 lib/elements/satin_column.py:62 -#: lib/elements/satin_column.py:71 +#: lib/elements/satin_column.py:57 lib/elements/satin_column.py:64 +#: lib/elements/satin_column.py:73 msgid "Contour Underlay" msgstr "Konturunterlage" -#: lib/elements/satin_column.py:62 lib/elements/satin_column.py:86 +#: lib/elements/satin_column.py:64 lib/elements/satin_column.py:88 msgid "Stitch length" msgstr "Stichlänge" -#: lib/elements/satin_column.py:68 +#: lib/elements/satin_column.py:70 msgid "Contour underlay inset amount" msgstr "Einrückung" -#: lib/elements/satin_column.py:69 +#: lib/elements/satin_column.py:71 msgid "Shrink the outline, to prevent the underlay from showing around the outside of the satin column." msgstr "Schrumpfen Sie den Umriss, um zu verhindern, dass die Unterlage an der Außenseite der Satinkolumne sichtbar wird." -#: lib/elements/satin_column.py:79 +#: lib/elements/satin_column.py:81 msgid "Center-walk underlay" msgstr "Mittellinien Unterlage" -#: lib/elements/satin_column.py:79 lib/elements/satin_column.py:86 +#: lib/elements/satin_column.py:81 lib/elements/satin_column.py:88 msgid "Center-Walk Underlay" msgstr "Mittellinien Unterlage" -#: lib/elements/satin_column.py:91 +#: lib/elements/satin_column.py:93 msgid "Zig-zag underlay" msgstr "Zick-Zack Unterlage" -#: lib/elements/satin_column.py:91 lib/elements/satin_column.py:100 -#: lib/elements/satin_column.py:111 +#: lib/elements/satin_column.py:93 lib/elements/satin_column.py:102 +#: lib/elements/satin_column.py:113 msgid "Zig-zag Underlay" msgstr "Zick-Zack Unterlage" -#: lib/elements/satin_column.py:97 +#: lib/elements/satin_column.py:99 msgid "Zig-Zag spacing (peak-to-peak)" msgstr "Zick-Zack Abstand (Spitze zu Spitze)" -#: lib/elements/satin_column.py:98 +#: lib/elements/satin_column.py:100 msgid "Distance between peaks of the zig-zags." msgstr "Abstand zwischen den Spitzen der Zick-Zacks." -#: lib/elements/satin_column.py:108 +#: lib/elements/satin_column.py:110 msgid "Inset amount" msgstr "Einrückung" -#: lib/elements/satin_column.py:109 +#: lib/elements/satin_column.py:111 msgid "default: half of contour underlay inset" msgstr "Standard: Halbe Einrückung der Konturunterlage" -#: lib/elements/satin_column.py:146 +#: lib/elements/satin_column.py:148 #, python-format msgid "satin column: %(id)s: at least two subpaths required (%(num)d found)" msgstr "Satinkolumne: %(id)s: es werden mindestens zwei Pfade benötigt (%(num)d gefunden)" -#: lib/elements/satin_column.py:172 +#: lib/elements/satin_column.py:173 msgid "One or more rails crosses itself, and this is not allowed. Please split into multiple satin columns." msgstr "Eine oder mehrere Konturen überschneiden sich, dies ist nicht erlaubt. Bitte in mehrere Satinkolumnen aufteilen." -#: lib/elements/satin_column.py:179 +#: lib/elements/satin_column.py:180 msgid "satin column: One or more of the rungs doesn't intersect both rails." msgstr "Satinkolumne: Eine oder mehrere Verbindungen überschneiden nicht die Konturen." -#: lib/elements/satin_column.py:179 lib/elements/satin_column.py:181 +#: lib/elements/satin_column.py:181 lib/elements/satin_column.py:184 msgid "Each rail should intersect both rungs once." msgstr "Jede Umrandung sollte die Querverbindung nur einmal kreuzen." -#: lib/elements/satin_column.py:181 +#: lib/elements/satin_column.py:183 msgid "satin column: One or more of the rungs intersects the rails more than once." msgstr "Satinkolumne: Eine oder mehrere Verbindungen überschneiden sich mehrmals." -#: lib/elements/satin_column.py:222 +#: lib/elements/satin_column.py:224 #, python-format msgid "satin column: object %s has a fill (but should not)" msgstr "Satinkolumne: Objekt %s hat eine Füllung (sollte es aber nicht haben)" -#: lib/elements/satin_column.py:226 +#: lib/elements/satin_column.py:228 #, python-format msgid "satin column: object %(id)s has two paths with an unequal number of points (%(length1)d and %(length2)d)" msgstr "Satinkolumne: Objekt %(id)s enthält zwei Pfade mit einer ungleichen Anzahl von Knotenpunkten (%(length1)d und %(length2)d)" @@ -300,35 +357,35 @@ msgstr "Laufstichlänge" msgid "Length of stitches in running stitch mode." msgstr "Länge der Stiche im Laufstich-Modus." -#: lib/elements/stroke.py:42 +#: lib/elements/stroke.py:43 msgid "Bean stitch number of repeats" msgstr "Bean stitch Anzahl der Wiederholungen" -#: lib/elements/stroke.py:43 +#: lib/elements/stroke.py:44 msgid "Backtrack each stitch this many times. A value of 1 would triple each stitch (forward, back, forward). A value of 2 would quintuple each stitch, etc. Only applies to running stitch." msgstr "Jeden Stich vervielfachen. Ein Wert von 1 würde jeden Stich verdreifachen (vorwärts, rückwärts, vorwärts). Ein Wert von 2 würde jeden Stich fünffach ausführen. Gilt nur für den Laufstich." -#: lib/elements/stroke.py:53 +#: lib/elements/stroke.py:56 msgid "Length of stitches in zig-zag mode." msgstr "Stichlänge im Zick-Zack Modus." -#: lib/elements/stroke.py:64 +#: lib/elements/stroke.py:67 msgid "Repeats" msgstr "Wiederholungen" -#: lib/elements/stroke.py:65 +#: lib/elements/stroke.py:68 msgid "Defines how many times to run down and back along the path." msgstr "Definiert, wie oft am Pfad herunter und zurück gelaufen wird." -#: lib/elements/stroke.py:89 +#: lib/elements/stroke.py:92 msgid "Manual stitch placement" msgstr "Manuelle Stichpositionierung" -#: lib/elements/stroke.py:90 +#: lib/elements/stroke.py:93 msgid "Stitch every node in the path. Stitch length and zig-zag spacing are ignored." msgstr "Stickt jeden Punkt des Pfades. Laufstichlänge und Zick-Zack-Abstand werden ignoriert." -#: lib/elements/stroke.py:124 +#: lib/elements/stroke.py:127 msgid "Legacy running stitch setting detected!\n\n" "It looks like you're using a stroke smaller than 0.5 units to indicate a running stitch, which is deprecated. Instead, please set your stroke to be dashed to indicate running stitch. Any kind of dash will work." msgstr "Veraltete Laufstich-Einstellung erkannt!\n\n" @@ -346,22 +403,22 @@ msgstr "Keine zu stickenden Pfade im Dokument gefunden." msgid "Tip: use Path -> Object to Path to convert non-paths." msgstr "Tipp: Verwende Pfad -> Objekt zu Pfad umwandeln, um nicht-Pfade vor dem Sticken zu konvertieren." -#: lib/extensions/convert_to_satin.py:28 +#: lib/extensions/convert_to_satin.py:29 msgid "Please select at least one line to convert to a satin column." msgstr "Bitte wähle mindestens eine Zeile aus, die in eine Satinkolumne konvertiert werden soll." #. : Convert To Satin extension, user selected one or more objects that were #. not lines. -#: lib/extensions/convert_to_satin.py:33 +#: lib/extensions/convert_to_satin.py:34 msgid "Only simple lines may be converted to satin columns." msgstr "Nur einfache Linien können in Satinkolumnen konvertiert werden." -#: lib/extensions/convert_to_satin.py:54 +#: lib/extensions/convert_to_satin.py:56 #, python-format msgid "Cannot convert %s to a satin column because it intersects itself. Try breaking it up into multiple paths." msgstr "%s kann nicht in eine Satinkolumne konvertiert werden, da sie sich selbst berührt. Versuche es in mehrere Pfade aufzuteilen." -#: lib/extensions/embroider.py:41 +#: lib/extensions/embroider.py:38 msgid "\n\n" "Seeing a 'no such option' message? Please restart Inkscape to fix." msgstr "\n\n" @@ -371,73 +428,73 @@ msgstr "\n\n" msgid "Please select one or more satin columns to flip." msgstr "Bitte wählen Sie eine oder mehrere Satinkolumnen zum drehen aus." -#: lib/extensions/install.py:30 +#: lib/extensions/install.py:25 msgid "Ink/Stitch can install files (\"add-ons\") that make it easier to use Inkscape to create machine embroidery designs. These add-ons will be installed:" msgstr "Ink/Stitch kann Dateien (\"Erweiterungen\") installieren, um das Erstellen von Maschinenstickdateien unter Inkscape zu erleichtern. Diese Erweiterungen werden installiert:" -#: lib/extensions/install.py:31 +#: lib/extensions/install.py:27 msgid "thread manufacturer color palettes" msgstr "Garnhersteller-Farbpaletten" -#: lib/extensions/install.py:32 +#: lib/extensions/install.py:28 msgid "Ink/Stitch visual commands (Object -> Symbols...)" msgstr "Ink/Stitch visuelle Befehle (Objekt -> Symbole ...)" -#: lib/extensions/install.py:41 +#: lib/extensions/install.py:37 msgid "Install" msgstr "Installieren" -#: lib/extensions/install.py:44 lib/extensions/params.py:380 +#: lib/extensions/install.py:40 lib/extensions/params.py:380 msgid "Cancel" msgstr "Abbrechen" -#: lib/extensions/install.py:58 +#: lib/extensions/install.py:54 msgid "Choose Inkscape directory" msgstr "Inkscape-Verzeichnis auswählen" -#: lib/extensions/install.py:68 +#: lib/extensions/install.py:64 msgid "Inkscape add-on installation failed" msgstr "Installation der Inkscape Erweiterung gescheitert" -#: lib/extensions/install.py:69 +#: lib/extensions/install.py:65 msgid "Installation Failed" msgstr "Installation fehlgeschlagen" -#: lib/extensions/install.py:73 +#: lib/extensions/install.py:69 msgid "Inkscape add-on files have been installed. Please restart Inkscape to load the new add-ons." msgstr "Inkscape Add-ons wurden installiert. Bitte starten Sie Inkscape erneut um die neuen Add-ons zu laden." -#: lib/extensions/install.py:74 +#: lib/extensions/install.py:70 msgid "Installation Completed" msgstr "Installation abgeschlossen" -#: lib/extensions/install.py:103 +#: lib/extensions/install.py:104 msgid "Ink/Stitch Add-ons Installer" msgstr "Ink/Stitch Add-ons Installer" -#: lib/extensions/layer_commands.py:29 +#: lib/extensions/layer_commands.py:27 msgid "Please choose one or more commands to add." msgstr "Bitte wählen Sie einen oder mehrere Befehle um diese zu verknüpfen." -#: lib/extensions/layer_commands.py:41 lib/extensions/object_commands.py:80 +#: lib/extensions/layer_commands.py:39 lib/extensions/object_commands.py:74 msgid "Ink/Stitch Command" msgstr "Ink/Stitch Befehl" #. : the name of the line that connects a command to the object it applies to -#: lib/extensions/object_commands.py:36 +#: lib/extensions/object_commands.py:30 msgid "connector" msgstr "Verknüpfung" #. : the name of a command symbol (example: scissors icon for trim command) -#: lib/extensions/object_commands.py:95 +#: lib/extensions/object_commands.py:89 msgid "command marker" msgstr "Befehlszeichen" -#: lib/extensions/object_commands.py:106 +#: lib/extensions/object_commands.py:100 msgid "Please select one or more objects to which to attach commands." msgstr "Wählen Sie ein oder mehrere Objekte aus, an die Sie die Befehle anhängen möchten." -#: lib/extensions/object_commands.py:114 +#: lib/extensions/object_commands.py:108 msgid "Please choose one or more commands to attach." msgstr "Bitte wählen Sie einen oder mehrere Befehle um diese zu verknüpfen." @@ -531,21 +588,21 @@ msgstr "Einstellung \"%s\" nicht gefunden." msgid "Preset \"%s\" already exists. Please use another name or press \"Overwrite\"" msgstr "Einstellung \"%s\" bereits vorhanden. Bitte verwenden Sie einen anderen Namen oder drücken Sie \"Überschreiben\"" -#: lib/extensions/print_pdf.py:134 +#: lib/extensions/print_pdf.py:132 msgid "Closing..." msgstr "Beende..." -#: lib/extensions/print_pdf.py:134 +#: lib/extensions/print_pdf.py:132 msgid "It is safe to close this window now." msgstr "Es ist jetzt sicher, das Fenster zu schließen." -#: lib/extensions/print_pdf.py:265 +#: lib/extensions/print_pdf.py:263 msgid "A print preview has been opened in your web browser. This window will stay open in order to communicate with the JavaScript code running in your browser.\n\n" "This window will close after you close the print preview in your browser, or you can close it manually if necessary." msgstr "Eine Druckvorschau wurde im Webbrowser geöffnet. Dieses Fenster dient zur Sicherstellung der Kommunikation zwischen Inkscape und dem Browser.\n\n" "Dieses Fenster schließt automatisch, wenn die Druckvorschau geschlossen wird. Es kann auch manuell beendet werden, falls nötig." -#: lib/extensions/print_pdf.py:411 +#: lib/extensions/print_pdf.py:412 msgid "Ink/Stitch Print" msgstr "Ink/Stitch Drucken" @@ -553,14 +610,14 @@ msgstr "Ink/Stitch Drucken" msgid "Embroidery Simulation" msgstr "Stick Simulation" -#: lib/extensions/zip.py:52 +#: lib/extensions/zip.py:49 msgid "No embroidery file formats selected." msgstr "Keine Stick-Dateiformate ausgewählt." #. If you translate this string, that will tell Ink/Stitch to #. generate menu items for this language in Inkscape's "Extensions" #. menu. -#: lib/inx/utils.py:43 +#: lib/inx/utils.py:46 msgid "Generate INX files" msgstr "Erzeuge INX Dateien" @@ -612,24 +669,24 @@ msgstr "Stiche # " msgid "Stitch #" msgstr "Stiche #" -#: lib/stitches/auto_fill.py:168 +#: lib/stitches/auto_fill.py:167 msgid "Unable to autofill. This most often happens because your shape is made up of multiple sections that aren't connected." msgstr "Automatische Füllung nicht möglich. Dies geschieht, weil Ihre Form aus mehreren und nicht verbundenen Abschnitten besteht." -#: lib/stitches/auto_fill.py:393 +#: lib/stitches/auto_fill.py:395 msgid "Unexpected error while generating fill stitches. Please send your SVG file to lexelby@github." msgstr "Unerwarteter Fehler beim Generieren der Füllstiche. Bitte senden Sie die SVG-Datei an lexelby@github." -#: lib/svg/svg.py:90 +#: lib/svg/svg.py:94 msgid "Stitch Plan" msgstr "Stich-Plan" -#: lib/svg/units.py:44 +#: lib/svg/units.py:46 #, python-format msgid "parseLengthWithUnits: unknown unit %s" msgstr "AnalysiereLängeMitEinheiten: Unbekannte Einheit %s" -#: lib/svg/units.py:76 +#: lib/svg/units.py:78 #, python-format msgid "Unknown unit: %s" msgstr "Unbekannte Einheit: %s" @@ -1055,10 +1112,14 @@ msgstr "Brother Stichformat" msgid "Convert Line to Satin" msgstr "Konvertierung der Linie zu Satinstich" -#: templates/convert_to_satin.inx:12 templates/embroider.inx:23 -#: templates/flip.inx:12 templates/install.inx:12 -#: templates/layer_commands.inx:16 templates/object_commands.inx:14 -#: templates/params.inx:12 templates/print.inx:12 templates/simulate.inx:12 +#. This is used for the submenu under Extensions -> Ink/Stitch. Translate this +#. to your language's word for its language, e.g. "Español" for the spanish +#. translation. +#: templates/convert_to_satin.inx:12 templates/embroider.inx:24 +#: templates/flip.inx:12 templates/global_commands.inx:16 +#: templates/install.inx:12 templates/layer_commands.inx:16 +#: templates/object_commands.inx:15 templates/params.inx:12 +#: templates/print.inx:12 templates/simulate.inx:12 msgid "English" msgstr "Deutsch" @@ -1102,6 +1163,20 @@ msgstr "Leer lassen, um die Ausgabe im Erweiterungsverzeichnis von Inkscape zu s msgid "Flip Satin Columns" msgstr "Satinkolumne umkehren" +#: templates/global_commands.inx:3 +msgid "Add Commands" +msgstr "" + +#: templates/global_commands.inx:7 +msgid "These commands affect the entire embroidery design." +msgstr "" + +#. Inkscape submenu under Extensions -> Ink/Stitch +#: templates/global_commands.inx:18 templates/layer_commands.inx:17 +#: templates/object_commands.inx:16 +msgid "Commands" +msgstr "" + #: templates/input.inx:11 #, python-format msgid "convert %(file_extension)s file to Ink/Stitch manual-stitch paths" @@ -1120,8 +1195,8 @@ msgid "Commands will be added to the currently-selected layer." msgstr "Befehle werden zur aktuell ausgewählten Ebene hinzugefügt." #: templates/object_commands.inx:3 -msgid "Attach Commands" -msgstr "Befehle anhängen" +msgid "Attach Commands to Selected Objects" +msgstr "" #: templates/output.inx:11 #, python-format -- cgit v1.3.1