From 646b3134c97a35399bd4113087a01a4b0ed256bf Mon Sep 17 00:00:00 2001 From: Ink/Stitch Crowdin integration Date: Sun, 12 May 2024 01:14:27 +0000 Subject: new translations from Crowdin --- translations/messages_fr_FR.po | 328 ++++++++++++++++++++++------------------- 1 file changed, 173 insertions(+), 155 deletions(-) (limited to 'translations/messages_fr_FR.po') diff --git a/translations/messages_fr_FR.po b/translations/messages_fr_FR.po index dcf596ee..77c0b62e 100644 --- a/translations/messages_fr_FR.po +++ b/translations/messages_fr_FR.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2024-05-10 01:08+0000\n" -"PO-Revision-Date: 2024-05-10 01:09\n" +"POT-Creation-Date: 2024-05-12 01:13+0000\n" +"PO-Revision-Date: 2024-05-12 01:14\n" "Last-Translator: \n" "Language-Team: French\n" "MIME-Version: 1.0\n" @@ -12,7 +12,7 @@ msgstr "" "Generated-By: Babel 2.15.0\n" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-05-10 01:08+0000\n" +"POT-Creation-Date: 2024-05-12 01:13+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: \n" "Language-Team: LANGUAGE \n" @@ -232,464 +232,474 @@ msgstr "Chopin Script" msgid "The capital M is 38.3 millimeter wide at 100% scale. Can be scaled down to 80% or up to 120%. Every satin has zigzag underlay" msgstr "La majuscule M a une largeur de 38.3 millimètres à l'échelle 100 %. Peut être réduit à 80 % ou augmenté à 120 %. Chaque satin a une sous-couche centrale" -#. name of font in fonts/coronaviral +#. name of font in fonts/colorful #: inkstitch-fonts-metadata.py:82 +msgid "Colorful" +msgstr "" + +#. description of font in fonts/colorful +#: inkstitch-fonts-metadata.py:84 +msgid "Colorful is a tartan fill font approximatively 35mm tall. It may be scaled down to 70% and up to 200%" +msgstr "" + +#. name of font in fonts/coronaviral +#: inkstitch-fonts-metadata.py:86 msgid "Coronaviral" msgstr "Coronaviral" #. description of font in fonts/coronaviral -#: inkstitch-fonts-metadata.py:84 +#: inkstitch-fonts-metadata.py:88 msgid "A font created with manual sitch. Do not change the size or very little. The capital em is 22mm wide at 100%" msgstr "Cette police est créée au point manuel. Ne pas modifier sa taille ou alors très peu. La majuscule M a 22mm de large à 100%" #. name of font in fonts/dejavufont -#: inkstitch-fonts-metadata.py:86 +#: inkstitch-fonts-metadata.py:90 msgid "Dejavu Serif" msgstr "DejaVu Serif" #. description of font in fonts/dejavufont -#: inkstitch-fonts-metadata.py:88 +#: inkstitch-fonts-metadata.py:92 #, python-format msgid "DejaVu Serif Condensed. The capital M is 19,8 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has center-walk underlay." msgstr "DejeVu Serif Condensé. La majuscule M a une largeur de 19,8 millimètres à l'échelle 100 %. Peut être réduit à 80 % ou augmenté à 150 %. Chaque satin a une sous-couche centrale." #. name of font in fonts/digory_doodles_bean -#: inkstitch-fonts-metadata.py:90 +#: inkstitch-fonts-metadata.py:94 msgid "Digory Doodles Bean" msgstr "Digory Doodles Bean" #. description of font in fonts/digory_doodles_bean -#: inkstitch-fonts-metadata.py:92 +#: inkstitch-fonts-metadata.py:96 msgid "All letters have mixed satin and bean stitch. The capital M is 16mm tall. The small x is 7 mm." msgstr "Les lettres sont constituées d'un mélange de point satin et de point triple. Le M majuscule mesure 16 mm et le x minuscule 7 mm." #. name of font in fonts/dinomouse72 -#: inkstitch-fonts-metadata.py:94 +#: inkstitch-fonts-metadata.py:98 msgid "DinoMouse72" msgstr "DinoMouse 72" #. description of font in fonts/dinomouse72 -#: inkstitch-fonts-metadata.py:96 +#: inkstitch-fonts-metadata.py:100 msgid "A Font Grove jawn. Satin width is 2.5mm at 18mm capitals" msgstr "Le satin mesure 2,5 mm de large sur les majuscules de 18 mm" #. name of font in fonts/emilio_20 -#: inkstitch-fonts-metadata.py:98 +#: inkstitch-fonts-metadata.py:102 msgid "Emilio 20" msgstr "Emilio 20" #. description of font in fonts/emilio_20 -#: inkstitch-fonts-metadata.py:100 +#: inkstitch-fonts-metadata.py:104 #, python-format msgid "Emilio 20 is a font with capital only and numbers. M is 48.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay" msgstr "Emilio 20 est une police de majuscules uniquement et de chiffres. Le M a 48,5 millimètres de large à l'échelle 100%. Peut être diminuée jusqu'à 70% et agrandie jusqu'à 140%. Les points satin ont une sous-couche zigzag" #. name of font in fonts/emilio_20_applique -#: inkstitch-fonts-metadata.py:102 +#: inkstitch-fonts-metadata.py:106 msgid "EMILIO_20_Applique" msgstr "EMILIO_20_Applique" #. description of font in fonts/emilio_20_applique -#: inkstitch-fonts-metadata.py:104 +#: inkstitch-fonts-metadata.py:108 msgid "Emilio 20 Applique is an Applique font approximatively 50mm high. It should not be scaled down but may be scaled up to 150%. This font is an altered version (larger satin columns) of Emilio_20 while Emilio_20_Bold is Emilio_20_applique without the applique" msgstr "Emilio_20_Applique est une fonte d'appliqués d'environ 50 mm de haut. Elle ne peut pas être réduite, mais peut être agrandie jusqu'à 150% Cette fonte est une version modifiée d'Emiilio_20 (colonnes plus large). Emilio_Bold a les même caractères qu'Emilio_20 _Applique, mais est prévue pour être brodée sans appliqué" #. name of font in fonts/emilio_20_bold -#: inkstitch-fonts-metadata.py:106 +#: inkstitch-fonts-metadata.py:110 msgid "EMILIO_20_Bold" msgstr "EMILIO_20_Bold" #. description of font in fonts/emilio_20_bold -#: inkstitch-fonts-metadata.py:108 +#: inkstitch-fonts-metadata.py:112 msgid "Emilio_20_Bold is an altered version of Emilio_20 and is approximatively 50mm high." msgstr "Emilio_20_Bold est une version modifiée d'Emilio_20 et mesure approximativement 50 mm de haut." #. name of font in fonts/emilio_20_simple -#: inkstitch-fonts-metadata.py:110 +#: inkstitch-fonts-metadata.py:114 msgid "Emilio 20 Simple" msgstr "Emilio 20 Simple" #. description of font in fonts/emilio_20_simple -#: inkstitch-fonts-metadata.py:112 +#: inkstitch-fonts-metadata.py:116 #, python-format msgid "Emilio is a font with capital only and numbers. M is 42.5 millimeter wide at 100% scale. Can be scaled down to 50% or up to 140%. Every satin has zigzag underlay" msgstr "Emilio 20 est une police de majuscules uniquement et de chiffres. Le M a 42,5 millimètres de large à l'échelle 100%. Peut être diminuée jusqu'à 50% et agrandie jusqu'à 140%. Les points satin ont une sous-couche zigzag." #. name of font in fonts/emilio_20_simple_small -#: inkstitch-fonts-metadata.py:114 +#: inkstitch-fonts-metadata.py:118 msgid "Emilio 20 Simple Small" msgstr "Emilio 20 Simple small" #. description of font in fonts/emilio_20_simple_small -#: inkstitch-fonts-metadata.py:116 +#: inkstitch-fonts-metadata.py:120 msgid "This font is an altered version of Emilio 20 simple, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Emilio 20 Simple font between 15% (for a 8mm font ) and 40 % (for a 20mm font)." msgstr "Cette police est une version modifiée de Emilio 20 simple pour permettre une réduction plus forte de la taille. L'usage de fil fin (60) et d'une aiguille fine (60) est obligatoire. Le paramétrage modifié de cette police permet de réduire la police Emilio 20 simple originelle entre 15% (pour une police de 8 mm) et 40% (pour une police de 20 mm)." #. name of font in fonts/emilio_20_tartan -#: inkstitch-fonts-metadata.py:118 +#: inkstitch-fonts-metadata.py:122 msgid "EMILIO_20_Tartan" msgstr "Emilio_20_Tartan" #. description of font in fonts/emilio_20_tartan -#: inkstitch-fonts-metadata.py:120 +#: inkstitch-fonts-metadata.py:124 msgid "Emilio 20 Tartan uses tartan fill for a colorful font approximatively 40 mm high. The font can be scaled down to 65% and up to 150%." msgstr "Emilio 20 Tartan utilise les remplissages tartan pour devenir une fonte très colorée d'environ 40 mm de haut. La fonte peut être réduite jusqu'à 65% et augmentée jusqu'à 150%." #. name of font in fonts/emilio_20_tricolore -#: inkstitch-fonts-metadata.py:122 +#: inkstitch-fonts-metadata.py:126 msgid "EMILIO 20 TRICOLORE" msgstr "EMILIO 20 TRICOLORE" #. description of font in fonts/emilio_20_tricolore -#: inkstitch-fonts-metadata.py:124 +#: inkstitch-fonts-metadata.py:128 msgid "Emilio 20 tricolore is a large tricolor fill stitches and satin columns font of size approximately 100mm. It contains 36 glyphs including the numbers and the 26 capitals A-Z. It can be reduced down to 90% and enlarged up to 120%" msgstr "Emilio 20 tricolore est une grande police tricolore en remplissage et colonne satin d'environ 100mm. Il y a 36 glyphes dont les chiffres et les 26 majuscules A-Z. Peut être réduite jusqu'à 90% et agrandie jusqu'à 120%" #. name of font in fonts/espresso_KOR -#: inkstitch-fonts-metadata.py:126 +#: inkstitch-fonts-metadata.py:130 msgid "Espresso KOR" msgstr "Espresso KOR" #. description of font in fonts/espresso_KOR -#: inkstitch-fonts-metadata.py:128 +#: inkstitch-fonts-metadata.py:132 msgid "The capital M is 16.2 mm high at 100 scale. Every satin has zigzag underlay. x is 11.5 mm high, q is 17.5 mm high, l is 17.2 mm high. The font may be scaled up to 200% and down to 80%" msgstr "Le M majuscule mesure 16.2 mm de haut à l'échelle 100%. Toutes les colonnes satin ont une sous-couche zigzag. x mesure 11,5 mm de haut, l mesure 17,2 mm. La police peut être réduite jusqu'à 80% et agrandie jusqu'à 200%." #. name of font in fonts/espresso_tiny -#: inkstitch-fonts-metadata.py:130 +#: inkstitch-fonts-metadata.py:134 msgid "Espresso tiny" msgstr "Espresso tiny" #. description of font in fonts/espresso_tiny -#: inkstitch-fonts-metadata.py:132 +#: inkstitch-fonts-metadata.py:136 msgid "This font is an altered version of Espresso KOR, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Espresso font between 25% (for a 5mm font ) and 55 % (for a 11mm font)." msgstr "Cette police est une version modifiée de Espresso KOR pour permettre une réduction plus forte de la taille. L'usage de fil fin (60) et d'une aiguille fine (60) est obligatoire. Le paramétrage modifié de cette police permet de réduire la police Espresso KOR originelle entre 25% (pour une police de 5 mm) et 55% (pour une police de 11 mm)." #. name of font in fonts/excalibur_KOR -#: inkstitch-fonts-metadata.py:134 +#: inkstitch-fonts-metadata.py:138 msgid "Excalibur KOR" msgstr "Excalibur KOR" #. description of font in fonts/excalibur_KOR -#: inkstitch-fonts-metadata.py:136 +#: inkstitch-fonts-metadata.py:140 msgid "Excalibur KOR is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 50% and enlarged up to 140%. It contains 144 glyphs, covering most western European languages needs." msgstr "Excalibur KOR est une petite police en colonnes satin d'environ 20 mm. Peut être réduite jusqu'à 50% et agrandie jusqu'à 140%. Il y a 144 glyphes couvrant la majorité des langues d'Europe de l'Ouest." #. name of font in fonts/excalibur_small -#: inkstitch-fonts-metadata.py:138 +#: inkstitch-fonts-metadata.py:142 msgid "Excalibur small" msgstr "Excalibur small" #. description of font in fonts/excalibur_small -#: inkstitch-fonts-metadata.py:140 +#: inkstitch-fonts-metadata.py:144 msgid "This font is an altered version of Excalibur KOR, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Excalibur KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)." msgstr "Cette police est une version modifiée de Excalibur KOR pour permettre une réduction plus forte de la taille. L'usage de fil fin (60) et d'une aiguille fine (60) est obligatoire. Le paramétrage modifié de cette police permet de réduire la police Excalibur KOR originelle entre 25% (pour une police de 5 mm) et 55% (pour une police de 11 mm)." #. name of font in fonts/fold_inkstitch -#: inkstitch-fonts-metadata.py:142 +#: inkstitch-fonts-metadata.py:146 msgid "Fold Ink/Stitch" msgstr "Fold Ink/Stitch" #. description of font in fonts/fold_inkstitch -#: inkstitch-fonts-metadata.py:144 +#: inkstitch-fonts-metadata.py:148 msgid "Fold Ink/Stitch is a large triple and quintuple running stitches capital font of size 100 mm. It contains 40 glyphs including all numbers and the 26 capitals A-Z. It can be reduced down to 80% and enlarged as much as you like" msgstr "Fold Ink/Stitch est une grande police de majuscules au point droit triple ou quintuple de 100 mm. Il y a 40 glyphes dont les chiffres et les 26 majuscules A-Z. Peut être réduite jusqu'à 80% et agrandie autant que vous le souhaitez." #. name of font in fonts/geneva_rounded -#: inkstitch-fonts-metadata.py:146 +#: inkstitch-fonts-metadata.py:150 msgid "Geneva Simple Sans Rounded" msgstr "Geneva Simple Sans Arrondi" #. description of font in fonts/geneva_rounded -#: inkstitch-fonts-metadata.py:148 +#: inkstitch-fonts-metadata.py:152 msgid "Suitable for small fonts (8 to 20 mm)" msgstr "Convient aux petites polices de caractères (8 à 20 mm)" #. name of font in fonts/geneva_simple -#: inkstitch-fonts-metadata.py:150 +#: inkstitch-fonts-metadata.py:154 msgid "Geneva Simple Sans" msgstr "Geneva Simple Sans" #. description of font in fonts/geneva_simple -#: inkstitch-fonts-metadata.py:152 +#: inkstitch-fonts-metadata.py:156 msgid "Suitable for small fonts (6 to 15mm)" msgstr "Convient aux petites polices (6 à 15 mm)" #. name of font in fonts/glacial_tiny -#: inkstitch-fonts-metadata.py:154 +#: inkstitch-fonts-metadata.py:158 msgid "Glacial Tiny 60 AGS" msgstr "Glacial Tiny 60 AGS" #. description of font in fonts/glacial_tiny -#: inkstitch-fonts-metadata.py:156 +#: inkstitch-fonts-metadata.py:160 msgid "Glacial is a very tiny font: at 100%, M stands at 5.6mm. Thin thread (60 wt ) and thin needle (8/60) are mandatory. The glyphs cover many European languages. It can be reduced down to 50% and enlarged up to 150%." msgstr "Glacial est une toute toute petite police, le M majuscule mesure 5.6 mm de haut. Du fil fin (60 wt) et une aiguille fine (8/60) sont obligatoires. Les glyphes couvrent de nombreux langages européens. Elle peut être réduite jusqu'à 50% et élargie jusqu'à 150%." #. name of font in fonts/infinipicto -#: inkstitch-fonts-metadata.py:158 +#: inkstitch-fonts-metadata.py:162 msgid "InfiniPicto" msgstr "InfiniPicto" #. description of font in fonts/infinipicto -#: inkstitch-fonts-metadata.py:160 +#: inkstitch-fonts-metadata.py:164 msgid "InfiniPicto is a fun font of size approximatively 70 mm containing only the 26 A-Z glyph. Each letter is a pictogram of an object whose name begins with that very letter..... in French" msgstr "InfiniPicto est une police amusante d'une taille d'environ 70 mm contenant uniquement les 26 glyphes A-Z. Chaque lettre est le pictogramme d'un objet dont le nom commence par cette même lettre..... en français." #. name of font in fonts/kaushan_script_MAM -#: inkstitch-fonts-metadata.py:162 +#: inkstitch-fonts-metadata.py:166 msgid "Kaushan Script MAM" msgstr "Kaushan Script MAM" #. description of font in fonts/kaushan_script_MAM -#: inkstitch-fonts-metadata.py:164 +#: inkstitch-fonts-metadata.py:168 #, python-format msgid "The capital M is 29 millimeter wide at 100% scale. Can be scaled down to 80% or up to 200%. Every satin has zigzag underlay" msgstr "La majuscule M a une largeur de 29 millimètres à l'échelle 100 %. Peut être réduit à 80 % ou augmenté à 200 %. Chaque satin a une sous-couche zigzag" #. name of font in fonts/learning_curve -#: inkstitch-fonts-metadata.py:166 +#: inkstitch-fonts-metadata.py:170 msgid "Learning curve" msgstr "Learning curve" #. description of font in fonts/learning_curve -#: inkstitch-fonts-metadata.py:168 +#: inkstitch-fonts-metadata.py:172 msgid "Small running stitch script font of size approximatively 12 mm. It can be reduced down to 90% and enlarged up to 200%" msgstr "Petite police d'écriture en point droit d'environ 12 mm. Elle peut être réduite jusqu'à 90% et agrandie jusqu'à 200%." #. name of font in fonts/lobster_AGS -#: inkstitch-fonts-metadata.py:170 +#: inkstitch-fonts-metadata.py:174 msgid "Lobster AGS" msgstr "Lobster AGS" #. description of font in fonts/lobster_AGS -#: inkstitch-fonts-metadata.py:172 +#: inkstitch-fonts-metadata.py:176 #, python-format msgid " The capital M is 19.8 millimeter wide at 100% scale. Can be scaled down to 80% or up to 150%. Every satin has zigzag underlay" msgstr "La majuscule M a 19,8mm de large à l'échelle 100%. Peut être réduite jusqu'à 80% et agrandie jusqu'à 150%. Chaque satin a une sous-couche zigzag." #. name of font in fonts/magnolia_KOR -#: inkstitch-fonts-metadata.py:174 +#: inkstitch-fonts-metadata.py:178 msgid "Magnolia KOR" msgstr "Magnolia KOR" #. description of font in fonts/magnolia_KOR -#: inkstitch-fonts-metadata.py:176 +#: inkstitch-fonts-metadata.py:180 msgid "Magnolia KOR is a script font of size approximatively 20mm. It can be scaled down to 80% and up to 120%" msgstr "Magnolia KOR est une police scripte d'environ 20mm. Peut être diminuée jusqu'à 80% et agrandie jusqu'à 120%" #. name of font in fonts/magnolia_small -#: inkstitch-fonts-metadata.py:178 +#: inkstitch-fonts-metadata.py:182 msgid "Magnolia small" msgstr "Magnolia small" #. description of font in fonts/magnolia_small -#: inkstitch-fonts-metadata.py:180 +#: inkstitch-fonts-metadata.py:184 msgid "This font is an altered version of Magnolia KOR, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Magnolia KOR font between 25% (for a 5mm font ) and 50 % (for a 10mm font)." msgstr "Cette police est une version modifiée de Magnolia KOR pour permettre une réduction plus forte de la taille. L'usage de fil fin (60) et d'une aiguille fine (60) est obligatoire. Le paramétrage modifié de cette police permet de réduire la police Magnolia KOR originelle entre 25% (pour une police de 5 mm) et 50% (pour une police de 10 mm)." #. name of font in fonts/manuskript_gotisch -#: inkstitch-fonts-metadata.py:182 +#: inkstitch-fonts-metadata.py:186 msgid "Manuskript Gothisch" msgstr "Manuskript Gothisch" #. description of font in fonts/manuskript_gotisch -#: inkstitch-fonts-metadata.py:184 +#: inkstitch-fonts-metadata.py:188 #, python-format msgid "The capital M is 35 millimeter wide at 100% scale. Can be scaled down to 70% or up to 140%. Every satin has zigzag underlay" msgstr "La majuscule M a une largeur de 35 millimètres à l'échelle 100 %. Peut être réduit à 70 % ou augmenté à 140 %. Chaque satin a une sous-couche zigzag" #. name of font in fonts/marcelusSC_FI -#: inkstitch-fonts-metadata.py:186 +#: inkstitch-fonts-metadata.py:190 msgid "MarcellusSC-FI" msgstr "MarcellusSC-FI" #. description of font in fonts/marcelusSC_FI -#: inkstitch-fonts-metadata.py:188 +#: inkstitch-fonts-metadata.py:192 #, python-format msgid "MarcellusSC-FI is a small capital font of size 36 mm. It contains 107 glyphs covering most Western European languages. It can be reduced down to 70% and enlarged up to 200% or 500% using satin split" msgstr "MarcellusSC-FI est une police en petites majuscules de 36mm. Il y a 107 glyphes couvrant la majorité des langues d'Europe de l'Ouest. Peut être réduite jusqu'à 70% et agrandie jusqu'à 200% voire 500% en utilisant les colonnes satin partagées." #. name of font in fonts/medium_font -#: inkstitch-fonts-metadata.py:190 +#: inkstitch-fonts-metadata.py:194 msgid "Ink/Stitch Medium Font" msgstr "Ink/Stitch Moyenne police" #. description of font in fonts/medium_font -#: inkstitch-fonts-metadata.py:192 +#: inkstitch-fonts-metadata.py:196 #, python-format msgid "A basic font suited for medium-sized characters. The capital em is 0.6 inches wide at 100% scale. Can be scaled down to 75% or up to 150%. Every satin has contour underlay." msgstr "Une fonte idéale pour des caractères de taille moyenne. La lettre \"M\" (majuscule) a une largeur de 15,24 mm à une échelle de 100%. On peut transformer la taille entre 75% et 150%. Les points satin utilisent une sous-couches avec des lignes de contour." #. name of font in fonts/milli_marif_bold -#: inkstitch-fonts-metadata.py:194 +#: inkstitch-fonts-metadata.py:198 msgid "Millimarif-bold20" msgstr "Millimarif bold 20" #. description of font in fonts/milli_marif_bold -#: inkstitch-fonts-metadata.py:196 +#: inkstitch-fonts-metadata.py:200 msgid "This bold font can be reduced down to 75% and enlarged up to 140% allowing Capital M height to flow from 15mm to 28mm." msgstr "Cette fonte peut être réduite jusqu'à 75% et élargie jusqu'à 140%,. Le M majuscule varie selon l'échelle de 15 à 28 mm." #. name of font in fonts/monicha -#: inkstitch-fonts-metadata.py:198 +#: inkstitch-fonts-metadata.py:202 msgid "MONICHA" msgstr "Monicha" #. description of font in fonts/monicha -#: inkstitch-fonts-metadata.py:200 +#: inkstitch-fonts-metadata.py:204 msgid "Monicha is a script satin font of size approximatively 20mm. In addition to the glyphs covering most Western European languages it contains additional ornemental letters with swashes. These ornemental letters should be used with caution to avoid overlays. In particular do not use two ornemental letters in a row. Please consult the documentation for information on how to access the ornemental letters. The font can not be scaled down but can be scaled up to 150%. " msgstr "Monicha est une police d'écriture en colonne satin d'environ 20 mm. En plus des glyphes couvrant la plupart des langages d'Europe de l'Ouest, elle contient des lettres ornementales à écharpe. Ces lettres ornementales doivent être utilisées avec précaution pour éviter les surépaisseurs. Merci de consulter la documentation pour les informations sur l'accès à ces lettres ornementales. La police ne doit pas être réduite, mais peut être agrandie jusqu'à 150%." #. name of font in fonts/namskout_AGS -#: inkstitch-fonts-metadata.py:202 +#: inkstitch-fonts-metadata.py:206 msgid "Namskout" msgstr "Namskout" #. description of font in fonts/namskout_AGS -#: inkstitch-fonts-metadata.py:204 +#: inkstitch-fonts-metadata.py:208 msgid "Namskout is a large applique font of size approximatively 90mm. It contains 43 glyphs including all numbers and the 26 capitals A-Z. It can be reduced down to 50% and enlarged up to 150% " msgstr "Namskout est une grande police en appliqué d'environ 90mm. Il y a 43 glyphes dont les chiffres, 30 majuscules A-Z, Ä, Ü, Ö, È, !,?,&. Peut être diminuée jusqu'à 50% et agrandie jusqu'à 150%." #. name of font in fonts/nick_ainley -#: inkstitch-fonts-metadata.py:206 +#: inkstitch-fonts-metadata.py:210 msgid "NickAinley" msgstr "NickAinley" #. description of font in fonts/nick_ainley -#: inkstitch-fonts-metadata.py:208 +#: inkstitch-fonts-metadata.py:212 msgid "A tiny 1mm-bean alphabet based on a 24pt Seniors Studio jawn" msgstr "Un petit alphabet en point triple de 1 mm, basé sur une fonte de Seniors Studio en 24 pt" #. name of font in fonts/pacificlo -#: inkstitch-fonts-metadata.py:210 +#: inkstitch-fonts-metadata.py:214 msgid "Pacificlo" msgstr "Pacificlo" #. description of font in fonts/pacificlo -#: inkstitch-fonts-metadata.py:212 +#: inkstitch-fonts-metadata.py:216 msgid "Pacificlo is a small satin column manuscript font of size approximatively 20mm. It can be reduced down to 80% and enlarged up to 140%. It contains 120 glyphs, covering most Western European Languages needs. " msgstr "La majuscule M a 19,8mm de large à l'échelle 100%. Peut être réduite jusqu'à 80% et agrandie jusqu'à 150%. Chaque satin a une sous-couche zigzag" #. name of font in fonts/pacificlo_tiny -#: inkstitch-fonts-metadata.py:214 +#: inkstitch-fonts-metadata.py:218 msgid "Pacificlo tiny" msgstr "Pacificlo tiny" #. description of font in fonts/pacificlo_tiny -#: inkstitch-fonts-metadata.py:216 +#: inkstitch-fonts-metadata.py:220 msgid "This font is an altered version of Pacificlo, to allow a greater scaling down. Both thin thread (60) and thin needle (60) are mandatory. The altered embroidery parameters of this font allow to scale down the original Pacificlo font between 25% (for a 5mm font ) and 55 % (for a 11mm font)." msgstr "Cette police est une version modifiée de Pacificlo pour permettre une réduction plus forte de la taille. L'usage de fil fin (60) et d'une aiguille fine (60) est obligatoire. Le paramétrage modifié de cette police permet de réduire la police Pacificlo originelle entre 25% (pour une police de 7mm) et 55% (pour une police de 16mm)." #. name of font in fonts/roaring_twenties_KOR -#: inkstitch-fonts-metadata.py:218 +#: inkstitch-fonts-metadata.py:222 msgid "Roaring Twenties KOR" msgstr "Roaring Twenties KOR" #. description of font in fonts/roaring_twenties_KOR -#: inkstitch-fonts-metadata.py:220 +#: inkstitch-fonts-metadata.py:224 msgid "Roaring Twenties KOR is a font of size approximatively 16 mm. It can be scaled down to 70% and up to 150%" msgstr "Roaring Twenties KOR est une fonte d'approximativement 16 mm de haut. Elle peut être réduite jusqu'à 70 % et augmentée jusqu'à 150 %." #. name of font in fonts/roaring_twenties_KOR_small -#: inkstitch-fonts-metadata.py:222 +#: inkstitch-fonts-metadata.py:226 msgid "Roaring Twenties KOR Small" msgstr "Roaring Twenties KOR Small" #. description of font in fonts/roaring_twenties_KOR_small -#: inkstitch-fonts-metadata.py:224 +#: inkstitch-fonts-metadata.py:228 msgid "This font is an altered version of Roaring Twenties KOR, to allow a greater scaling down. The use of both thin thread (60) and thin needle (60) is mandatory. The altered embroidery parameters of this font allow to scale down the original Roaring Twenties font between 35% (for a 6 mm font ) and 70 % (for a 12 mm font)." msgstr "Cette police est une version modifiée de Roaring Twenties KOR pour permettre une réduction plus forte de la taille. L'usage de fil fin (60) et d'une aiguille fine (60) est obligatoire. Le paramétrage modifié de cette police permet de réduire la police Roaring Twenties KOR originelle entre 35% (pour une police de 6 mm) et 70% (pour une police de 12 mm)." #. name of font in fonts/roman_ags -#: inkstitch-fonts-metadata.py:226 +#: inkstitch-fonts-metadata.py:230 msgid "Roman AGS" msgstr "Roman AGS" #. description of font in fonts/roman_ags -#: inkstitch-fonts-metadata.py:228 +#: inkstitch-fonts-metadata.py:232 #, python-format msgid "Based on Latin Modern Roman 10 Bold italic. The capital M is 42.5 millimeter wide at 100% scale. Can be scaled down to 80% or up to 130%. Every satin has zigzag underlay" msgstr "Basée sur Latin Modern Roman 10 Bold italic. Le M majuscule a une largeur de 42.5 millimètres à l'échelle 100 %. Peut être réduit à 80 % ou augmenté à 130 %. Chaque satin a une sous-couche zigzag." #. name of font in fonts/roman_ags_bicolor -#: inkstitch-fonts-metadata.py:230 +#: inkstitch-fonts-metadata.py:234 msgid "Roman bicolor AGS" msgstr "Roman bicolore AGS" #. description of font in fonts/roman_ags_bicolor -#: inkstitch-fonts-metadata.py:232 +#: inkstitch-fonts-metadata.py:236 #, python-format msgid "Based on Latin Modern Roman 10 Bold italic. A font with capital letters with 2 colors. Very easy to use with letters from Romanaugusa. The capital M is 42.5 millimeter wide at 100% scale. Can be scaled down to 70% or up to 130%. Every satin has zigzag underlay" msgstr "Basée sur Latin Modern Roman 10 Bold italic. Une police de majuscules à deux couleurs. Très facile à utiliser avec les lettres de Romanaugusa. La majuscule M a une largeur de 42.5 millimètres à l'échelle 100 %. Peut être réduit à 80 % ou augmenté à 130 %. Chaque satin a une sous-couche zigzag" #. name of font in fonts/sacramarif -#: inkstitch-fonts-metadata.py:234 +#: inkstitch-fonts-metadata.py:238 msgid "Sacramarif" msgstr "Sacramarif" #. description of font in fonts/sacramarif -#: inkstitch-fonts-metadata.py:236 +#: inkstitch-fonts-metadata.py:240 msgid "Based on Sacramento. Very small font with runstitch. It can be scaled from 80% to 150%" msgstr "Basée sur Sacramento. Très petite police en point droit. Peut être utilisée entre 80% et 150% de la taille de base" #. name of font in fonts/small_font -#: inkstitch-fonts-metadata.py:238 +#: inkstitch-fonts-metadata.py:242 msgid "Ink/Stitch Small Font" msgstr "Ink/Stitch Petite police" #. description of font in fonts/small_font -#: inkstitch-fonts-metadata.py:240 +#: inkstitch-fonts-metadata.py:244 #, python-format msgid "A font suited for small characters. The capital em is 0.2 inches wide at 100% scale. Can be scaled up to 300%." msgstr "Une fonte adaptée pour les petits caractères. Le \"M\" a une largeur de 5,08mm à une échelle de 100%. Il est possible de l’agrandir de 300%." #. name of font in fonts/sortefaxXL -#: inkstitch-fonts-metadata.py:242 +#: inkstitch-fonts-metadata.py:246 msgid "Sortefax XL Initials" msgstr "Sortefax XL Initials" #. description of font in fonts/sortefaxXL -#: inkstitch-fonts-metadata.py:244 +#: inkstitch-fonts-metadata.py:248 msgid " Sortefax is a very large satin stitch Capital font of size 150mm. It can be reduced down to 75% and enlarged up to 200% It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; ) to obtain a framed Capital or Number. Warning: for a few large letters you will need to manually enlarge the frame" msgstr "Sortefax XL est une très grande police de majuscules en colonnes satin d'environ 150 mm. Elle peut être réduite jusqu'à 75% et agrandie jusqu'à 200%. Elle contient les 37 glyphes : A-Z, 0-9 et le ampersand. De plus les 10 glyphes (){}[],;.: sont utilisés pour stocker des cadres. Tapper n'importe quelle lettre suivie par n'importe quel cadre (par exemple A( ou B; ) pour obtenir la lettre encadrée. Attention: pour quelques très grandes lettres vous devrez élargir manuellement le cadre." #. name of font in fonts/sortefax_medium -#: inkstitch-fonts-metadata.py:246 +#: inkstitch-fonts-metadata.py:250 msgid "Sortefax Medium Initials" msgstr "Sortefax Medium Initials" #. description of font in fonts/sortefax_medium -#: inkstitch-fonts-metadata.py:248 +#: inkstitch-fonts-metadata.py:252 msgid "Sortefax Medium Initials is a satin stitch Capital font of size 90 mm. It can be reduced down to 70% and enlarged up to 200%. It contains the 37 glyphs :ampersand, A-Z and 0-9. In addition the ten glyphs (){}[],;.: are used to store frames. Type any letter followed by any frame (e.g. A( or B; or 7, ) to obtain a framed Capital or Number. Some manual arranging of the frame around the letter may be required" msgstr "Sortefax Medium Initials est une police de majuscules en colonnes satin d'environ 90 mm. Elle peut être réduite jusqu'à 70% et agrandie jusqu'à 200%. Elle contient les 37 glyphes : A-Z, 0-9 et le ampersand. De plus les 10 glyphes (){}[],;.: sont utilisés pour stocker des cadres. Tapper n'importe quelle lettre suivie par n'importe quel cadre (par exemple A( ou B; ou 7,) pour obtenir la lettre encadrée. Il est possible qu'un ajustement manuel du cadre autour de la lettre soit requis." #. name of font in fonts/tt_directors -#: inkstitch-fonts-metadata.py:250 +#: inkstitch-fonts-metadata.py:254 msgid "TT Directors" msgstr "TT directors" #. description of font in fonts/tt_directors -#: inkstitch-fonts-metadata.py:252 +#: inkstitch-fonts-metadata.py:256 msgid "A font suited for directing" msgstr "Une fonte faite pour des metteurs en scène" #. name of font in fonts/tt_masters -#: inkstitch-fonts-metadata.py:254 +#: inkstitch-fonts-metadata.py:258 msgid "TT Masters" msgstr "TT masters" #. description of font in fonts/tt_masters -#: inkstitch-fonts-metadata.py:256 +#: inkstitch-fonts-metadata.py:260 msgid "A font suited for heavy typing :)" msgstr "Une fonte \"lourde\"" #. name of font in fonts/violin_serif -#: inkstitch-fonts-metadata.py:258 +#: inkstitch-fonts-metadata.py:262 msgid "Violin Serif" msgstr "Violin Serif" #. description of font in fonts/violin_serif -#: inkstitch-fonts-metadata.py:260 +#: inkstitch-fonts-metadata.py:264 #, python-format msgid "A condensed serif font designed. Can be scaled up to 120% or scaled down to 80%. Caps height is about 28 millimeters or 1.1 inches" msgstr "Une police serif condensée. Peut être agrandie jusqu'à 120 % ou réduite à 80 %. La hauteur des majuscules est d'environ 28 millimètres (1,1 pouces)\n\n" @@ -1250,126 +1260,126 @@ msgstr "Inverser l'angle" msgid "Flip automatically calculated angle if it appears to be wrong." msgstr "Inverse automatiquement l'angle calculé s'il semble faux." -#: lib/elements/element.py:223 lib/gui/preferences.py:59 +#: lib/elements/element.py:226 lib/gui/preferences.py:59 #: lib/gui/preferences.py:106 msgid "Minimum stitch length" msgstr "Longueur minimum du point" -#: lib/elements/element.py:224 +#: lib/elements/element.py:227 msgid "Overwrite global minimum stitch length setting. Shorter stitches than that will be removed." msgstr "Est prioritaire par rapport à la valeur de la longueur minimum de point définie dans les préférences. Les points plus courts seront supprimés." -#: lib/elements/element.py:234 lib/gui/preferences.py:41 +#: lib/elements/element.py:237 lib/gui/preferences.py:41 msgid "Minimum jump stitch length" msgstr "Longueur minimum de saut" -#: lib/elements/element.py:235 +#: lib/elements/element.py:238 msgid "Overwrite global minimum jump stitch length setting. Shorter distances to the next object will have no lock stitches." msgstr "Est prioritaire par rapport à la valeur de la longueur minimum de saut définie dans les préférences. Si la distance à l'objet suivant est inférieure, il n'y aura pas de points d'arrêt." -#: lib/elements/element.py:245 +#: lib/elements/element.py:248 msgid "Allow lock stitches" msgstr "Autoriser les points d'arrêt" -#: lib/elements/element.py:246 +#: lib/elements/element.py:249 msgid "Tie thread at the beginning and/or end of this object. Manual stitch will only add lock stitches if force lock stitched is checked." msgstr "Faire un nœud au début et/ou à la fin de cet objet. Le point manuel n'ajoutera de point d'arrêt que si \"Forcer les points d'arrêt\" est coché." #. options to allow lock stitch before and after objects -#: lib/elements/element.py:251 +#: lib/elements/element.py:254 msgid "Both" msgstr "Au début et à la fin" -#: lib/elements/element.py:251 +#: lib/elements/element.py:254 msgid "Before" msgstr "Au début" -#: lib/elements/element.py:251 +#: lib/elements/element.py:254 msgid "After" msgstr "A la fin" -#: lib/elements/element.py:251 +#: lib/elements/element.py:254 msgid "Neither" msgstr "Aucun" -#: lib/elements/element.py:260 +#: lib/elements/element.py:263 #: inx/inkstitch_lettering_force_lock_stitches.inx:3 msgid "Force lock stitches" msgstr "Forcer des points d'arrêt" -#: lib/elements/element.py:261 +#: lib/elements/element.py:264 msgid "Sew lock stitches after sewing this element, even if the distance to the next object is shorter than defined by the minimum jump stitch length value in the Ink/Stitch preferences." msgstr "Créer des points d'arrêt après avoir cousu cet élément, même si la distance jusqu'à l'objet suivant est plus courte que la valeur de 'longueur minimum de saut' défini dans les préférences Ink/Stitch." -#: lib/elements/element.py:273 +#: lib/elements/element.py:276 msgid "Tack stitch" msgstr "Point d'arrêt initial" -#: lib/elements/element.py:274 +#: lib/elements/element.py:277 msgid "Tack down stitch type" msgstr "Type de point d'arrêt initial" -#: lib/elements/element.py:284 lib/elements/element.py:330 +#: lib/elements/element.py:287 lib/elements/element.py:333 msgid "Custom path" msgstr "Chemin personnalisé" -#: lib/elements/element.py:285 +#: lib/elements/element.py:288 msgid "Enter a custom path. For svg paths The last node will not be embroidered, but represents the first stitch of the element." msgstr "Entrez un chemin personnalisé. Pour les chemins svg, le dernier nœud ne sera pas brodé, mais représente le premier point de l'élément." -#: lib/elements/element.py:295 lib/elements/element.py:307 +#: lib/elements/element.py:298 lib/elements/element.py:310 msgid "Scale tack stitch" msgstr "Échelle du point d'arrêt initial" -#: lib/elements/element.py:296 +#: lib/elements/element.py:299 msgid "Set stitch length. A 1 in a custom path equals this values." msgstr "Détermine la longueur de point. Un 1 dans un chemin personnalisé représentera cette valeur." -#: lib/elements/element.py:308 +#: lib/elements/element.py:311 msgid "Scale tack stitch by this percentage." msgstr "Mettre le point d'arrêt initial à l'échelle selon ce pourcentage." -#: lib/elements/element.py:319 +#: lib/elements/element.py:322 msgid "Lock stitch" msgstr "Point d'arrêt" -#: lib/elements/element.py:320 +#: lib/elements/element.py:323 msgid "Lock stitch type" msgstr "Type de point d'arrêt final" -#: lib/elements/element.py:331 +#: lib/elements/element.py:334 msgid "Enter a custom path. For svg paths the first node will not be embroidered, but represents the last stitch of the element." msgstr "Entrez un chemin personnalisé. Pour les chemins svg, le premier nœud ne sera pas brodé, mais représente le dernier point de l'élément." -#: lib/elements/element.py:341 lib/elements/element.py:353 +#: lib/elements/element.py:344 lib/elements/element.py:356 msgid "Scale lock stitch" msgstr "Échelle du point d'arrêt final" -#: lib/elements/element.py:342 +#: lib/elements/element.py:345 msgid "Set length of lock stitches (mm)." msgstr "Détermine la longueur des points d'arrêt (mm)." -#: lib/elements/element.py:354 +#: lib/elements/element.py:357 msgid "Scale lock stitch by this percentage." msgstr "Mettre à l'échelle le point d'arrêt selon ce pourcentage." -#: lib/elements/element.py:366 +#: lib/elements/element.py:369 msgid "Trim After" msgstr "Couper après" -#: lib/elements/element.py:367 +#: lib/elements/element.py:370 msgid "Add a TRIM command after stitching this object." msgstr "Ajoute une commande de coupe après avoir brodé cet objet." -#: lib/elements/element.py:376 +#: lib/elements/element.py:379 msgid "Stop After" msgstr "Arrêter après" -#: lib/elements/element.py:377 +#: lib/elements/element.py:380 msgid "Add a STOP command after stitching this object." msgstr "Ajoute une commande STOP après avoir brodé cet objet." -#: lib/elements/element.py:627 +#: lib/elements/element.py:630 msgid "Please run Extensions > Ink/Stitch > Troubleshoot > Troubleshoot objects. This will show you the exact location of the problem." msgstr "Merci d'exécuter Extensions > Ink/Stitch > Résolution de problèmes > Dépistage de problèmes avec des objets. Ceci indiquera la position erronée." @@ -1401,7 +1411,7 @@ msgstr "Compensation d'étirement - élargir" msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead." msgstr "Le paramètre élargir pour le remplissage de cet objet ne peut pas être appliqué. Ink/Stitch va l'ignorer et utiliser la taille originale." -#: lib/elements/fill_stitch.py:49 lib/elements/fill_stitch.py:650 +#: lib/elements/fill_stitch.py:49 lib/elements/fill_stitch.py:651 msgid "Inset" msgstr "Décalage" @@ -1724,11 +1734,11 @@ msgstr "Décaler les rangées autant de fois avant de répéter" msgid "Length of the cycle by which successive stitch rows are staggered. Fractional values are allowed and can have less visible diagonals than integer values." msgstr "Longueur du cycle de décalage des rangées. Les fractions sont autorisées et peuvent produire des diagonales moins visibles que les valeurs entières." -#: lib/elements/fill_stitch.py:373 lib/elements/fill_stitch.py:662 +#: lib/elements/fill_stitch.py:373 lib/elements/fill_stitch.py:663 msgid "Skip last stitch in each row" msgstr "Sauter le dernier point dans chaque rangée" -#: lib/elements/fill_stitch.py:374 lib/elements/fill_stitch.py:663 +#: lib/elements/fill_stitch.py:374 lib/elements/fill_stitch.py:664 msgid "The last stitch in each row is quite close to the first stitch in the next row. Skipping it decreases stitch count and density." msgstr "Le dernier point dans chaque rangée est très proche du premier point dans la rangée suivante. Le sauter diminue le nombre de points et la densité." @@ -1756,11 +1766,11 @@ msgstr "Terminer à la position de fin" msgid "If this option is disabled, the ending point will only be used to define a general direction for stitch routing. When enabled the last section will end at the defined spot." msgstr "Si cette option est désactivée, la position de fin ne sera utilisée que pour définir une direction générale de broderie. Si elle est activée, la dernière section terminera à l'endroit défini." -#: lib/elements/fill_stitch.py:427 lib/elements/fill_stitch.py:674 +#: lib/elements/fill_stitch.py:427 lib/elements/fill_stitch.py:675 msgid "Underpath" msgstr "Chemin de dessous" -#: lib/elements/fill_stitch.py:428 lib/elements/fill_stitch.py:675 +#: lib/elements/fill_stitch.py:428 lib/elements/fill_stitch.py:676 msgid "Travel inside the shape when moving from section to section. Underpath stitches avoid traveling in the direction of the row angle so that they are not visible. This gives them a jagged appearance." msgstr "Les points qui relient les sections à l'intérieur de l'objet. Les points des chemins de dessous évitent d'aller dans la même direction que ceux de dessus pour ne pas être visibles. Cela leur donne une apparence déchiquetée." @@ -1849,54 +1859,54 @@ msgstr "Largeur de chevron" msgid "Defines width of a herringbone pattern. Use 0 for regular rows." msgstr "Défini la largeur d'un motif de chevrons. Utiliser 0 pour des bandes normales." -#: lib/elements/fill_stitch.py:596 lib/elements/fill_stitch.py:605 -#: lib/elements/fill_stitch.py:632 lib/elements/fill_stitch.py:643 -#: lib/elements/fill_stitch.py:653 lib/elements/fill_stitch.py:665 -#: lib/elements/fill_stitch.py:678 +#: lib/elements/fill_stitch.py:597 lib/elements/fill_stitch.py:606 +#: lib/elements/fill_stitch.py:633 lib/elements/fill_stitch.py:644 +#: lib/elements/fill_stitch.py:654 lib/elements/fill_stitch.py:666 +#: lib/elements/fill_stitch.py:679 msgid "Fill Underlay" msgstr "Sous-couche de remplissage" -#: lib/elements/fill_stitch.py:596 lib/gui/tartan/embroidery_panel.py:55 +#: lib/elements/fill_stitch.py:597 lib/gui/tartan/embroidery_panel.py:55 #: inx/inkstitch_select_elements.inx:36 inx/inkstitch_select_elements.inx:64 #: inx/inkstitch_select_elements.inx:66 msgid "Underlay" msgstr "Sous-couche" -#: lib/elements/fill_stitch.py:602 +#: lib/elements/fill_stitch.py:603 msgid "Fill angle" msgstr "Angle de remplissage" -#: lib/elements/fill_stitch.py:603 +#: lib/elements/fill_stitch.py:604 msgid "Default: fill angle + 90 deg. Insert a list for multiple layers separated by a space." msgstr "Par défaut : angle de remplissage + 90 degrés. Pour obtenir plusieurs sous-couches, insérer une liste de valeurs séparée par des espaces." -#: lib/elements/fill_stitch.py:629 lib/gui/tartan/embroidery_panel.py:77 +#: lib/elements/fill_stitch.py:630 lib/gui/tartan/embroidery_panel.py:77 msgid "Row spacing" msgstr "Espacement entre rangées de points" -#: lib/elements/fill_stitch.py:630 +#: lib/elements/fill_stitch.py:631 msgid "default: 3x fill row spacing" msgstr "défaut: 3x espacement entre les rangées" -#: lib/elements/fill_stitch.py:640 lib/elements/stroke.py:158 +#: lib/elements/fill_stitch.py:641 lib/elements/stroke.py:158 #: lib/extensions/element_info.py:125 lib/extensions/element_info.py:181 msgid "Max stitch length" msgstr "Longueur de point maximale" -#: lib/elements/fill_stitch.py:641 +#: lib/elements/fill_stitch.py:642 msgid "default: equal to fill max stitch length" msgstr "défaut : égal à longueur max des points de remplissage" -#: lib/elements/fill_stitch.py:651 +#: lib/elements/fill_stitch.py:652 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill." msgstr "Rétrécit la forme avant de faire la sous-couche, pour empêcher que la sous-couche se montre en dehors du remplissage." -#: lib/elements/fill_stitch.py:686 lib/elements/satin_column.py:522 +#: lib/elements/fill_stitch.py:687 lib/elements/satin_column.py:522 #: lib/elements/stroke.py:396 lib/gui/satin_multicolor/colorize.py:56 msgid "Random seed" msgstr "Graine aléatoire" -#: lib/elements/fill_stitch.py:687 lib/elements/satin_column.py:523 +#: lib/elements/fill_stitch.py:688 lib/elements/satin_column.py:523 #: lib/elements/stroke.py:397 msgid "Use a specific seed for randomized attributes. Uses the element ID if empty." msgstr "Utiliser cette graine aléatoire pour le calcul des attributs. Si vide, utilise l'identificateur de l'élément." @@ -2788,7 +2798,7 @@ msgstr "Aucun élément n'a été choisi.\n\n" msgid "We couldn't find any fill colors on your text elements. Please read the instructions on our website." msgstr "Nous n'avons pas trouvé de couleurs de remplissage sur vos éléments de texte. Veuillez lire les instructions sur notre site Web." -#: lib/extensions/gradient_blocks.py:39 lib/extensions/gradient_blocks.py:47 +#: lib/extensions/gradient_blocks.py:40 lib/extensions/gradient_blocks.py:48 msgid "Please select at least one object with a gradient fill." msgstr "Merci de sélectionner au moins un objet avec un remplissage en dégradé." @@ -2876,11 +2886,11 @@ msgstr "Merci de sélection au moins une forme pour la convertir en contour." #: lib/extensions/outline.py:69 msgid "{element_id} is not a path element. This extension is designed to generate an outline of an embroidery pattern." -msgstr "" +msgstr "{element_id} n'est pas un chemin. Cette extension est prévue pour générer le contour d'un motif de broderie." #: lib/extensions/outline.py:75 msgid "Could not generate path from element {element_id} with the given settings." -msgstr "" +msgstr "Impossible de générer un chemin à partir de l'élément {element_id} avec ce paramétrage." #: lib/extensions/palette_split_text.py:16 msgid "Please select one or more text elements to split lines." @@ -3313,6 +3323,10 @@ msgstr "La liste des glyphes de cette fonte ne semble pas à jour.\n\n" "Merci de mettre a jour la liste des glyphes de %s:\n" "Extensions > Ink/Stitch >Gestion des polices > Mettre à jour la liste des glyphes" +#: lib/gui/lettering_font_sample.py:204 +msgid "Found duplicated glyphs in font file: {duplicated_glyphs}" +msgstr "" + #: lib/gui/preferences.py:16 lib/gui/preferences.py:17 #: inx/inkstitch_preferences.inx:3 msgid "Preferences" @@ -3595,6 +3609,10 @@ msgstr "1 fil de Tartan vaut (mm)" msgid "Used only for Threadcount code (The Scottish Register of Tartans)" msgstr "Utilisé uniquement pour le code Threadcount (Registre Écossais des Tartans)" +#: lib/gui/tartan/code_panel.py:34 +msgid "Apply Code" +msgstr "" + #: lib/gui/tartan/customize_panel.py:31 msgid "Pattern Settings" msgstr "Paramétrage du motif" @@ -3714,7 +3732,7 @@ msgstr "Cette extension remplit les formes avec un motif semblable à du tartan. #: lib/gui/tartan/help_panel.py:33 lib/gui/tartan/help_panel.py:34 msgid "https://inkstitch.org/docs/stitches/tartan-fill" -msgstr "" +msgstr "https://inkstitch.org/fr/docs/stitches/tartan-fill" #: lib/gui/tartan/main_panel.py:53 msgid "Customize" @@ -6030,39 +6048,39 @@ msgstr "Contour" #: inx/inkstitch_outline.inx:14 msgid "Keep original element(s)" -msgstr "" +msgstr "Garder les éléments originaux." #: inx/inkstitch_outline.inx:19 msgid "Threshold (mm²)" -msgstr "" +msgstr "Seuil (mm²)" #: inx/inkstitch_outline.inx:19 msgid "Removes smaller shape areas than that" -msgstr "" +msgstr "Supprime les zones de surface plus petite que" #: inx/inkstitch_outline.inx:21 msgid "Buffer (mm)" -msgstr "" +msgstr "Tampon (mm)" #: inx/inkstitch_outline.inx:21 msgid "Enlarge strokes by this amount" -msgstr "" +msgstr "Élargit les traits de cette quantité" #: inx/inkstitch_outline.inx:23 msgid "Smoothness (mm)" -msgstr "" +msgstr "Lissage (mm)" #: inx/inkstitch_outline.inx:23 msgid "Smooth path by this amount" -msgstr "" +msgstr "Lisser le chemin selon cette quantité" #: inx/inkstitch_outline.inx:28 msgid "Inset (mm)" -msgstr "" +msgstr "Encart (mm)" #: inx/inkstitch_outline.inx:28 msgid "Counteract the buffer effect" -msgstr "" +msgstr "Contrecarre l'effet tampon" #: inx/inkstitch_output_COL.inx:3 msgid "COL file output" -- cgit v1.3.1