From 14d87ce15756ed600554fb7fde9479133eb9f959 Mon Sep 17 00:00:00 2001 From: Ink/Stitch Crowdin integration Date: Sat, 3 Apr 2021 00:59:49 +0000 Subject: new translations from Crowdin --- translations/messages_it_IT.po | 601 +++++++++++++++++++++-------------------- 1 file changed, 312 insertions(+), 289 deletions(-) (limited to 'translations/messages_it_IT.po') diff --git a/translations/messages_it_IT.po b/translations/messages_it_IT.po index a9d29ca3..d30e5340 100644 --- a/translations/messages_it_IT.po +++ b/translations/messages_it_IT.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2021-03-23 00:43+0000\n" -"PO-Revision-Date: 2021-03-23 00:45\n" +"POT-Creation-Date: 2021-04-03 00:57+0000\n" +"PO-Revision-Date: 2021-04-03 00:59\n" "Last-Translator: \n" "Language-Team: Italian\n" "MIME-Version: 1.0\n" @@ -110,78 +110,78 @@ msgstr "TT Masters" msgid "A font suited for heavy typing :)" msgstr "Un font adatto a chi batte forte sui tasti :)" -#: inkstitch.py:51 +#: inkstitch.py:56 msgid "Ink/Stitch cannot read your SVG file. This is often the case when you use a file which has been created with Adobe Illustrator." msgstr "" -#: inkstitch.py:54 +#: inkstitch.py:59 msgid "Try to import the file into Inkscape through 'File > Import...' (Ctrl+I)" msgstr "" -#: inkstitch.py:65 +#: inkstitch.py:70 msgid "Ink/Stitch experienced an unexpected error." msgstr "Ink/Stitch ha verificato un errore inaspettato." -#: inkstitch.py:66 +#: inkstitch.py:71 msgid "If you'd like to help, please file an issue at https://github.com/inkstitch/inkstitch/issues and include the entire error description below:" msgstr "Se ti piacerebbe aiutare, puoi inviare un problema a https://github.com/inkstitch/inkstitch/issues e includere l'intera descrizione dell'errore quì sotto:" #. command attached to an object -#: lib/commands.py:21 +#: lib/commands.py:26 msgid "Fill stitch starting position" msgstr "Posizione di partenza del punto di riempimento" #. command attached to an object -#: lib/commands.py:24 +#: lib/commands.py:29 msgid "Fill stitch ending position" msgstr "Posizione finale del punto di riempimento" #. command attached to an object -#: lib/commands.py:27 +#: lib/commands.py:32 msgid "Auto-route satin stitch starting position" msgstr "Posizione di partenza del riempimento satinato in modalità percorso automatico" #. command attached to an object -#: lib/commands.py:30 +#: lib/commands.py:35 msgid "Auto-route satin stitch ending position" msgstr "Posizione di arrivo del riempimento satinato in modalità percorso automatico" #. command attached to an object -#: lib/commands.py:33 +#: lib/commands.py:38 msgid "Stop (pause machine) after sewing this object" msgstr "Ferma (metti in pausa) la macchina dopo aver ricamato questo oggetto" #. command attached to an object -#: lib/commands.py:36 +#: lib/commands.py:41 msgid "Trim thread after sewing this object" msgstr "Taglia il filo dopo aver ricamato questo oggetto" #. command attached to an object -#: lib/commands.py:39 +#: lib/commands.py:44 msgid "Ignore this object (do not stitch)" msgstr "Ignora questo oggetto (non ricamare)" #. command attached to an object -#: lib/commands.py:42 +#: lib/commands.py:47 msgid "Satin cut point (use with Cut Satin Column)" msgstr "Punto di taglio del ricamo satinato (da usare con il comando \"Taglia Colonna Satinata\")" #. command that affects a layer -#: lib/commands.py:46 +#: lib/commands.py:51 msgid "Ignore layer (do not stitch any objects in this layer)" msgstr "Ignora livello (non ricamare alcun oggetto del livello selezionato)" #. command that affects entire document -#: lib/commands.py:49 +#: lib/commands.py:54 msgid "Origin for exported embroidery files" msgstr "Punto di origine per file di ricamo da esportare" #. command that affects entire document -#: lib/commands.py:52 +#: lib/commands.py:57 msgid "Jump destination for Stop commands (a.k.a. \"Frame Out position\")." msgstr "Posizione di destinazione per i comandi Stop (anche: \"Posizione fuori quadro\")." -#: lib/commands.py:210 +#: lib/commands.py:215 #, python-format msgid "Error: there is more than one %(command)s command in the document, but there can only be one. Please remove all but one." msgstr "Errore: esiste più d'un comando %(command)s nel documento ma ne è ammesso solo uno. Per favore rimuovili tutti meno uno." @@ -191,208 +191,208 @@ msgstr "Errore: esiste più d'un comando %(command)s nel documento ma ne è amme #. command name to them. Contents of %(description)s are in a separate #. translation #. string. -#: lib/commands.py:217 +#: lib/commands.py:222 #, python-format msgid "%(command)s: %(description)s" msgstr "%(command)s: %(description)s" -#: lib/commands.py:290 lib/commands.py:401 lib/extensions/layer_commands.py:29 +#: lib/commands.py:295 lib/commands.py:406 lib/extensions/layer_commands.py:34 msgid "Ink/Stitch Command" msgstr "Comando Ink/Stitch" #. : the name of the line that connects a command to the object it applies to -#: lib/commands.py:315 +#: lib/commands.py:320 msgid "connector" msgstr "raccordo" #. : the name of a command symbol (example: scissors icon for trim command) -#: lib/commands.py:332 +#: lib/commands.py:337 msgid "command marker" msgstr "indicatore di comando" -#: lib/elements/auto_fill.py:16 +#: lib/elements/auto_fill.py:21 msgid "Small Fill" msgstr "Riempimento piccolo" -#: lib/elements/auto_fill.py:17 +#: lib/elements/auto_fill.py:22 msgid "This fill object is so small that it would probably look better as running stitch or satin column. For very small shapes, fill stitch is not possible, and Ink/Stitch will use running stitch around the outline instead." msgstr "Questo oggetto di riempimento è così piccolo che probabilmente avrebbe un aspetto migliore come punto filza o colonna satinata. Per forme molto piccole, il punto di riempimento non è possibile e Ink/Stitch utilizzerà invece il punto filza intorno al contorno." -#: lib/elements/auto_fill.py:23 lib/elements/auto_fill.py:139 +#: lib/elements/auto_fill.py:28 lib/elements/auto_fill.py:144 msgid "Expand" msgstr "Espandi" -#: lib/elements/auto_fill.py:24 +#: lib/elements/auto_fill.py:29 msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead." msgstr "" -#: lib/elements/auto_fill.py:29 lib/elements/auto_fill.py:116 +#: lib/elements/auto_fill.py:34 lib/elements/auto_fill.py:121 msgid "Inset" msgstr "Intarsio" -#: lib/elements/auto_fill.py:30 +#: lib/elements/auto_fill.py:35 msgid "The underlay inset parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use the original size instead." msgstr "" -#: lib/elements/auto_fill.py:35 +#: lib/elements/auto_fill.py:40 msgid "AutoFill" msgstr "Riempimento automatico" -#: lib/elements/auto_fill.py:38 +#: lib/elements/auto_fill.py:43 msgid "Automatically routed fill stitching" msgstr "Riempimento impunture indirizzato automaticamente" -#: lib/elements/auto_fill.py:58 +#: lib/elements/auto_fill.py:63 msgid "Running stitch length (traversal between sections)" msgstr "Lunghezza ounto imbastitura (attraversamento tra sezioni)" -#: lib/elements/auto_fill.py:59 +#: lib/elements/auto_fill.py:64 msgid "Length of stitches around the outline of the fill region used when moving from section to section." msgstr "Lunghezza dei punti intorno al contorno della regione di riempimento utilizzata per il passaggio da una sezione all'altra." -#: lib/elements/auto_fill.py:67 +#: lib/elements/auto_fill.py:72 msgid "Underlay" msgstr "Sottostrato" -#: lib/elements/auto_fill.py:67 lib/elements/auto_fill.py:76 -#: lib/elements/auto_fill.py:98 lib/elements/auto_fill.py:109 -#: lib/elements/auto_fill.py:119 lib/elements/auto_fill.py:131 -#: lib/elements/auto_fill.py:165 +#: lib/elements/auto_fill.py:72 lib/elements/auto_fill.py:81 +#: lib/elements/auto_fill.py:103 lib/elements/auto_fill.py:114 +#: lib/elements/auto_fill.py:124 lib/elements/auto_fill.py:136 +#: lib/elements/auto_fill.py:170 msgid "AutoFill Underlay" msgstr "Riempi automaticamente il sottostrato" -#: lib/elements/auto_fill.py:73 +#: lib/elements/auto_fill.py:78 msgid "Fill angle" msgstr "Angolo di riempimento" -#: lib/elements/auto_fill.py:74 +#: lib/elements/auto_fill.py:79 msgid "Default: fill angle + 90 deg. Insert comma-seperated list for multiple layers." msgstr "Predefinito: angolo di riempimento + 90 gradi. Inserire una lista separata da virgole per livelli multipli." -#: lib/elements/auto_fill.py:95 +#: lib/elements/auto_fill.py:100 msgid "Row spacing" msgstr "Spaziatura tra righe" -#: lib/elements/auto_fill.py:96 +#: lib/elements/auto_fill.py:101 msgid "default: 3x fill row spacing" msgstr "predefinito: 3 volte la spaziatura tra le file di riempimento" -#: lib/elements/auto_fill.py:106 +#: lib/elements/auto_fill.py:111 msgid "Max stitch length" msgstr "Lunghezza massima punto" -#: lib/elements/auto_fill.py:107 +#: lib/elements/auto_fill.py:112 msgid "default: equal to fill max stitch length" msgstr "predefinito: uguale alla lunghezza massima del punto di riempimento" -#: lib/elements/auto_fill.py:117 +#: lib/elements/auto_fill.py:122 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill." msgstr "Restringe la forma prima di eseguire il sottostrato per evitare che quest'ultimo sia visibile all'esterno del riempimento." -#: lib/elements/auto_fill.py:128 lib/elements/fill.py:69 +#: lib/elements/auto_fill.py:133 lib/elements/fill.py:74 msgid "Skip last stitch in each row" msgstr "Salta l'ultimo punto in ogni fila" -#: lib/elements/auto_fill.py:129 lib/elements/fill.py:70 +#: lib/elements/auto_fill.py:134 lib/elements/fill.py:75 msgid "The last stitch in each row is quite close to the first stitch in the next row. Skipping it decreases stitch count and density." msgstr "L'ultimo punto di ogni fila è molto vicino al primo punto della fila successiva. Saltandolo si riduce il numero di punti e la loro densità." -#: lib/elements/auto_fill.py:140 +#: lib/elements/auto_fill.py:145 msgid "Expand the shape before fill stitching, to compensate for gaps between shapes." msgstr "Espande la forma prima della cucitura di riempimento per compensare gli spazi vuoti tra le forme." -#: lib/elements/auto_fill.py:149 lib/elements/auto_fill.py:161 +#: lib/elements/auto_fill.py:154 lib/elements/auto_fill.py:166 msgid "Underpath" msgstr "Sottofondo" -#: lib/elements/auto_fill.py:150 lib/elements/auto_fill.py:162 +#: lib/elements/auto_fill.py:155 lib/elements/auto_fill.py:167 msgid "Travel inside the shape when moving from section to section. Underpath stitches avoid traveling in the direction of the row angle so that they are not visible. This gives them a jagged appearance." msgstr "Spostamento all'interno della forma quando si passa da una sezione all'altra. I punti del sottostrato non si spostano in direzione dell'angolo della fila e quindi non sono visibili. Questo dà loro un aspetto frastagliato." -#: lib/elements/auto_fill.py:248 +#: lib/elements/auto_fill.py:253 msgid "Error during autofill! This means that there is a problem with Ink/Stitch." msgstr "Errore durante l'auto-riempimento! C'è un problema con Ink/Stitch." #. this message is followed by a URL: #. https://github.com/inkstitch/inkstitch/issues/new -#: lib/elements/auto_fill.py:251 +#: lib/elements/auto_fill.py:256 msgid "If you'd like to help us make Ink/Stitch better, please paste this whole message into a new issue at: " msgstr "Se vuoi contribuire a migliorare Ink/Stitch, copia questo messaggio in una nuova issue a questo link: " -#: lib/elements/clone.py:22 +#: lib/elements/clone.py:27 msgid "Clone Object" msgstr "" -#: lib/elements/clone.py:23 +#: lib/elements/clone.py:28 msgid "There are one or more clone objects in this document. Ink/Stitch can work with single clones, but you are limited to set a very few parameters. " msgstr "" -#: lib/elements/clone.py:26 +#: lib/elements/clone.py:31 msgid "If you want to convert the clone into a real element, follow these steps:" msgstr "" -#: lib/elements/clone.py:27 +#: lib/elements/clone.py:32 msgid "* Select the clone" msgstr "" -#: lib/elements/clone.py:28 lib/elements/clone.py:39 +#: lib/elements/clone.py:33 lib/elements/clone.py:44 msgid "* Run: Edit > Clone > Unlink Clone (Alt+Shift+D)" msgstr "" -#: lib/elements/clone.py:33 +#: lib/elements/clone.py:38 msgid "Clone is not embroiderable" msgstr "" -#: lib/elements/clone.py:34 +#: lib/elements/clone.py:39 msgid "There are one ore more clone objects in this document. A clone must be a direct child of an embroiderable element. Ink/Stitch cannot embroider clones of groups or other not embroiderable elements (text or image)." msgstr "" -#: lib/elements/clone.py:37 +#: lib/elements/clone.py:42 msgid "Convert the clone into a real element:" msgstr "" -#: lib/elements/clone.py:38 +#: lib/elements/clone.py:43 msgid "* Select the clone." msgstr "" -#: lib/elements/clone.py:53 +#: lib/elements/clone.py:58 msgid "Clone" msgstr "" -#: lib/elements/clone.py:59 +#: lib/elements/clone.py:64 msgid "Custom fill angle" msgstr "" -#: lib/elements/clone.py:60 +#: lib/elements/clone.py:65 msgid "This setting will apply a custom fill angle for the clone." msgstr "" -#: lib/elements/element.py:247 +#: lib/elements/element.py:252 msgid "Allow lock stitches" msgstr "" -#: lib/elements/element.py:248 +#: lib/elements/element.py:253 msgid "Tie thread at the beginning and/or end of this object. Manual stitch will not add lock stitches." msgstr "" #. options to allow lock stitch before and after objects -#: lib/elements/element.py:252 +#: lib/elements/element.py:257 msgid "Both" msgstr "" -#: lib/elements/element.py:252 +#: lib/elements/element.py:257 msgid "Before" msgstr "" -#: lib/elements/element.py:252 +#: lib/elements/element.py:257 msgid "After" msgstr "" -#: lib/elements/element.py:252 +#: lib/elements/element.py:257 msgid "Neither" msgstr "" -#: lib/elements/element.py:294 +#: lib/elements/element.py:299 #, python-format msgid "Object %(id)s has an empty 'd' attribute. Please delete this object from your document." msgstr "L'oggetto %(id)s ha un attributo vuoto. Cancella questo oggetto dal tuo documento." @@ -400,475 +400,475 @@ msgstr "L'oggetto %(id)s ha un attributo vuoto. Cancella questo oggetto dal tuo #. used when showing an error message to the user such as #. "Some Path (path1234): error: satin column: One or more of the rungs doesn't #. intersect both rails." -#: lib/elements/element.py:380 +#: lib/elements/element.py:385 msgid "error:" msgstr "errore:" -#: lib/elements/empty_d_object.py:7 +#: lib/elements/empty_d_object.py:12 msgid "Empty D-Attribute" msgstr "" -#: lib/elements/empty_d_object.py:8 +#: lib/elements/empty_d_object.py:13 msgid "There is an invalid path object in the document, the d-attribute is missing." msgstr "" -#: lib/elements/empty_d_object.py:10 +#: lib/elements/empty_d_object.py:15 msgid "* Run Extensions > Ink/Stitch > Troubleshoot > Cleanup Document..." msgstr "" -#: lib/elements/fill.py:17 +#: lib/elements/fill.py:22 msgid "Unconnected" msgstr "Disconnesso" -#: lib/elements/fill.py:18 +#: lib/elements/fill.py:23 msgid "Fill: This object is made up of unconnected shapes. This is not allowed because Ink/Stitch doesn't know what order to stitch them in. Please break this object up into separate shapes." msgstr "Riempimento: questo oggetto è composto da forme non collegate. Questo non è permesso in quanto Ink/Stich non può sapere l'ordine con cui devono essere cucite. Scomponi l'oggetto." -#: lib/elements/fill.py:22 lib/elements/fill.py:30 +#: lib/elements/fill.py:27 lib/elements/fill.py:35 msgid "* Extensions > Ink/Stitch > Fill Tools > Break Apart Fill Objects" msgstr "" -#: lib/elements/fill.py:27 +#: lib/elements/fill.py:32 msgid "Border crosses itself" msgstr "Il bordo incrocia se stesso" -#: lib/elements/fill.py:28 +#: lib/elements/fill.py:33 msgid "Fill: Shape is not valid. This can happen if the border crosses over itself." msgstr "Riempimento: forma non valida. Può accadere se i bordi incrociano se stessi." -#: lib/elements/fill.py:35 +#: lib/elements/fill.py:40 msgid "Fill" msgstr "Riempi" -#: lib/elements/fill.py:42 +#: lib/elements/fill.py:47 msgid "Manually routed fill stitching" msgstr "Riempimento impunture indirizzato manualmente" -#: lib/elements/fill.py:43 +#: lib/elements/fill.py:48 msgid "AutoFill is the default method for generating fill stitching." msgstr "AutoFill è il metodo di default per generare cuciture di riempimento." -#: lib/elements/fill.py:52 +#: lib/elements/fill.py:57 msgid "Angle of lines of stitches" msgstr "Angolo delle linee dei punti" -#: lib/elements/fill.py:53 +#: lib/elements/fill.py:58 msgid "The angle increases in a counter-clockwise direction. 0 is horizontal. Negative angles are allowed." msgstr "L'angolo si incrementa in senso anti-orario. Zero è orizzontale. Sono ammessi valori negativi." -#: lib/elements/fill.py:80 +#: lib/elements/fill.py:85 msgid "Flip fill (start right-to-left)" msgstr "Capovolgi il riempimento (parti da destra a sinistra)" -#: lib/elements/fill.py:81 +#: lib/elements/fill.py:86 msgid "The flip option can help you with routing your stitch path. When you enable flip, stitching goes from right-to-left instead of left-to-right." msgstr "L'opzione di inversione può facilitare l'instradamento del percorso di cucitura. Quando è abilitata, l'ago va da destra a sinistra invece che da sinistra a destra." -#: lib/elements/fill.py:90 +#: lib/elements/fill.py:95 msgid "Spacing between rows" msgstr "Spaziatura tra le righe" -#: lib/elements/fill.py:91 +#: lib/elements/fill.py:96 msgid "Distance between rows of stitches." msgstr "Distanza tra righe di cucitura." -#: lib/elements/fill.py:104 +#: lib/elements/fill.py:109 msgid "Maximum fill stitch length" msgstr "Lunghezza massima del punto di riempimento" -#: lib/elements/fill.py:105 +#: lib/elements/fill.py:110 msgid "The length of each stitch in a row. Shorter stitch may be used at the start or end of a row." msgstr "La lunghezza di ogni punto di una riga. I punti più corti potrebbero essere usati all'inizio o alla fine della riga." -#: lib/elements/fill.py:114 +#: lib/elements/fill.py:119 msgid "Stagger rows this many times before repeating" msgstr "Scorri le file questo tanto di volte prima di ripetere" -#: lib/elements/fill.py:115 +#: lib/elements/fill.py:120 msgid "Setting this dictates how many rows apart the stitches will be before they fall in the same column position." msgstr "Questa impostazione determina quante righe ci saranno dalla cucitura prima di arrivare alla stessa colonna." -#: lib/elements/image.py:8 +#: lib/elements/image.py:13 msgid "Image" msgstr "" -#: lib/elements/image.py:9 +#: lib/elements/image.py:14 msgid "Ink/Stitch can't work with objects like images." msgstr "" -#: lib/elements/image.py:11 +#: lib/elements/image.py:16 msgid "* Convert your image into a path: Path > Trace Bitmap... (Shift+Alt+B) (further steps might be required)" msgstr "" -#: lib/elements/image.py:13 +#: lib/elements/image.py:18 msgid "* Alternatively redraw the image with the pen (P) or bezier (B) tool" msgstr "" -#: lib/elements/polyline.py:12 +#: lib/elements/polyline.py:17 msgid "Polyline Object" msgstr "" -#: lib/elements/polyline.py:13 +#: lib/elements/polyline.py:18 msgid "This object is an SVG PolyLine. Ink/Stitch can work with this shape, but you can't edit it in Inkscape. Convert it to a manual stitch path to allow editing." msgstr "Questo oggetto è una polilinea SVG. Ink/Stitch può lavorare con queste forme ma non è possibile modificarle in Inkscape. Per poterle modificare bisogna convertirle in un percorso di cucitura manuale." -#: lib/elements/polyline.py:17 lib/elements/satin_column.py:19 +#: lib/elements/polyline.py:22 lib/elements/satin_column.py:24 msgid "* Select this object." msgstr "* Seleziona questo oggetto." -#: lib/elements/polyline.py:18 +#: lib/elements/polyline.py:23 msgid "* Do Path > Object to Path." msgstr "* Crea percorso > Oggetto a percorso." -#: lib/elements/polyline.py:19 +#: lib/elements/polyline.py:24 msgid "* Optional: Run the Params extension and check the \"manual stitch\" box." msgstr "* Opzionale: esegui l'estensione \"Parametri\" e abilita \"cucitura manuale\"." -#: lib/elements/polyline.py:39 +#: lib/elements/polyline.py:44 msgid "Manual stitch along path" msgstr "" -#: lib/elements/satin_column.py:16 +#: lib/elements/satin_column.py:21 msgid "Satin column has fill" msgstr "La colonna raso non è vuota" -#: lib/elements/satin_column.py:17 +#: lib/elements/satin_column.py:22 msgid "Satin column: Object has a fill (but should not)" msgstr "Colonna raso: l'oggetto dovrebbe essere vuoto ma non lo è" -#: lib/elements/satin_column.py:20 +#: lib/elements/satin_column.py:25 msgid "* Open the Fill and Stroke panel" msgstr "* Apri il pannello \"Riempi e traccia\"" -#: lib/elements/satin_column.py:21 +#: lib/elements/satin_column.py:26 msgid "* Open the Fill tab" msgstr "* Apri la scheda Riempimento" -#: lib/elements/satin_column.py:22 +#: lib/elements/satin_column.py:27 msgid "* Disable the Fill" msgstr "* Disabilita il riempimento" -#: lib/elements/satin_column.py:23 +#: lib/elements/satin_column.py:28 msgid "* Alternative: open Params and switch this path to Stroke to disable Satin Column mode" msgstr "* Alternativa: apri i paramentri e trasforma questo percorso in traccia per disabilitare la modalità \"Colonna raso\"" -#: lib/elements/satin_column.py:28 +#: lib/elements/satin_column.py:33 msgid "Too few subpaths" msgstr "Numero insufficiente di sotto-percorsi" -#: lib/elements/satin_column.py:29 +#: lib/elements/satin_column.py:34 msgid "Satin column: Object has too few subpaths. A satin column should have at least two subpaths (the rails)." msgstr "Colonna raso: l'oggetto ha un numero di sotto-percorsi insufficiente. Una colonna raso deve avere almeno due sotto-percorsi (i binari)." -#: lib/elements/satin_column.py:31 +#: lib/elements/satin_column.py:36 msgid "* Add another subpath (select two rails and do Path > Combine)" msgstr "* Aggiungi un altro sotto-percorso (seleziona due binari ed esegui Percorso > Combina)" -#: lib/elements/satin_column.py:32 +#: lib/elements/satin_column.py:37 msgid "* Convert to running stitch or simple satin (Params extension)" msgstr "* Converti in cucitura progressiva o raso semplice (estensione Parametri)" -#: lib/elements/satin_column.py:37 +#: lib/elements/satin_column.py:42 msgid "Unequal number of points" msgstr "Numero di punti sbilanciato" -#: lib/elements/satin_column.py:38 +#: lib/elements/satin_column.py:43 msgid "Satin column: There are no rungs and rails have an an unequal number of points." msgstr "Colonna raso: non ci sono guide e i binari hanno un numero di punti diverso." -#: lib/elements/satin_column.py:40 +#: lib/elements/satin_column.py:45 msgid "The easiest way to solve this issue is to add one or more rungs. " msgstr "Il modo più semplice per risolvere questo problema è aggiungere una o più guide. " -#: lib/elements/satin_column.py:41 +#: lib/elements/satin_column.py:46 msgid "Rungs control the stitch direction in satin columns." msgstr "Le guide controllano la direzione di cucitura nelle colonne raso." -#: lib/elements/satin_column.py:42 +#: lib/elements/satin_column.py:47 msgid "* With the selected object press \"P\" to activate the pencil tool." msgstr "* Con l'oggetto selezionato premere \"P\" per attivare lo strumento matita." -#: lib/elements/satin_column.py:43 +#: lib/elements/satin_column.py:48 msgid "* Hold \"Shift\" while drawing the rung." msgstr "* Tenere premuto \"Shift\" mentre si disegna la guida." -#: lib/elements/satin_column.py:47 +#: lib/elements/satin_column.py:52 msgid "Each rung should intersect both rails once." msgstr "Ogni guida dovrebbe incrociare i binari almeno una volta." -#: lib/elements/satin_column.py:51 +#: lib/elements/satin_column.py:56 msgid "Rung doesn't intersect rails" msgstr "La guida non incrocia i binari" -#: lib/elements/satin_column.py:52 +#: lib/elements/satin_column.py:57 msgid "Satin column: A rung doesn't intersect both rails." msgstr "Colonna raso: una guida non incrocia entrambi i binari." -#: lib/elements/satin_column.py:56 +#: lib/elements/satin_column.py:61 msgid "Rung intersects too many times" msgstr "La guida incrocia troppe volte" -#: lib/elements/satin_column.py:57 +#: lib/elements/satin_column.py:62 msgid "Satin column: A rung intersects a rail more than once." msgstr "Colonna raso: una guida incrocia un binario più di una volta." -#: lib/elements/satin_column.py:61 +#: lib/elements/satin_column.py:66 msgid "Satin Column" msgstr "Colonna in raso" -#: lib/elements/satin_column.py:67 +#: lib/elements/satin_column.py:72 msgid "Custom satin column" msgstr "Colonna in raso personalizzata" -#: lib/elements/satin_column.py:73 +#: lib/elements/satin_column.py:78 msgid "\"E\" stitch" msgstr "Punto \"E\"" -#: lib/elements/satin_column.py:83 lib/elements/stroke.py:56 +#: lib/elements/satin_column.py:88 lib/elements/stroke.py:61 msgid "Zig-zag spacing (peak-to-peak)" msgstr "Spaziatura a zig-zag (picco a picco)" -#: lib/elements/satin_column.py:84 +#: lib/elements/satin_column.py:89 msgid "Peak-to-peak distance between zig-zags." msgstr "La distanza tra i picchi del zig-zag." -#: lib/elements/satin_column.py:95 +#: lib/elements/satin_column.py:100 msgid "Pull compensation" msgstr "Compensazione tiraggio" -#: lib/elements/satin_column.py:96 +#: lib/elements/satin_column.py:101 msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This setting expands each pair of needle penetrations outward from the center of the satin column." msgstr "I punti raso avvicinano il tessuto, con il risultato che la colonna è più stretta di quella disegnata. Questa impostazione allarga ogni coppia di inserimenti dell'ago verso l'esterno rispetto al centro della colonna raso." -#: lib/elements/satin_column.py:108 +#: lib/elements/satin_column.py:113 msgid "Contour underlay" msgstr "Sottostrato del contorno" -#: lib/elements/satin_column.py:108 lib/elements/satin_column.py:115 -#: lib/elements/satin_column.py:124 +#: lib/elements/satin_column.py:113 lib/elements/satin_column.py:120 +#: lib/elements/satin_column.py:129 msgid "Contour Underlay" msgstr "Sottostrato del contorno" -#: lib/elements/satin_column.py:115 lib/elements/satin_column.py:139 +#: lib/elements/satin_column.py:120 lib/elements/satin_column.py:144 msgid "Stitch length" msgstr "Lunghezza del punto" -#: lib/elements/satin_column.py:121 +#: lib/elements/satin_column.py:126 msgid "Contour underlay inset amount" msgstr "Offset interno del sottostrato del contorno" -#: lib/elements/satin_column.py:122 +#: lib/elements/satin_column.py:127 msgid "Shrink the outline, to prevent the underlay from showing around the outside of the satin column." msgstr "Stringere i bordi per evitare che la base fuoriesca dai limiti della colonna raso." -#: lib/elements/satin_column.py:132 +#: lib/elements/satin_column.py:137 msgid "Center-walk underlay" msgstr "Base passaggio centrale" -#: lib/elements/satin_column.py:132 lib/elements/satin_column.py:139 +#: lib/elements/satin_column.py:137 lib/elements/satin_column.py:144 msgid "Center-Walk Underlay" msgstr "Base passaggio centrale" -#: lib/elements/satin_column.py:144 +#: lib/elements/satin_column.py:149 msgid "Zig-zag underlay" msgstr "Base zig-zag" -#: lib/elements/satin_column.py:144 lib/elements/satin_column.py:153 -#: lib/elements/satin_column.py:164 +#: lib/elements/satin_column.py:149 lib/elements/satin_column.py:158 +#: lib/elements/satin_column.py:169 msgid "Zig-zag Underlay" msgstr "Base zig-zag" -#: lib/elements/satin_column.py:150 +#: lib/elements/satin_column.py:155 msgid "Zig-Zag spacing (peak-to-peak)" msgstr "Spazio del zig-zag (da picco a picco)" -#: lib/elements/satin_column.py:151 +#: lib/elements/satin_column.py:156 msgid "Distance between peaks of the zig-zags." msgstr "Distanza dei picchi del zig-zag." -#: lib/elements/satin_column.py:161 +#: lib/elements/satin_column.py:166 msgid "Inset amount" msgstr "Quantità di inserimento" -#: lib/elements/satin_column.py:162 +#: lib/elements/satin_column.py:167 msgid "default: half of contour underlay inset" msgstr "default: metà dell'inserimento di sottostrato del contorno" -#: lib/elements/stroke.py:15 +#: lib/elements/stroke.py:20 msgid "Stroke" msgstr "" -#: lib/elements/stroke.py:18 +#: lib/elements/stroke.py:23 msgid "Satin stitch along paths" msgstr "Punti raso lungo i percorsi" -#: lib/elements/stroke.py:32 +#: lib/elements/stroke.py:37 msgid "Running stitch length" msgstr "Lunghezza progressiva dei punti" -#: lib/elements/stroke.py:33 +#: lib/elements/stroke.py:38 msgid "Length of stitches in running stitch mode." msgstr "Lunghezza dei punti in modalità cucitura progressiva." -#: lib/elements/stroke.py:44 +#: lib/elements/stroke.py:49 msgid "Bean stitch number of repeats" msgstr "Numero di ripetizioni del punto a fagiolo" -#: lib/elements/stroke.py:45 +#: lib/elements/stroke.py:50 msgid "Backtrack each stitch this many times. A value of 1 would triple each stitch (forward, back, forward). A value of 2 would quintuple each stitch, etc. Only applies to running stitch." msgstr "Ripassare ogni punto questo numero di volte. Il valore 1 comporta un triplo passaggio (avanti, indietro, avanti). Il valore 2 comporta 5 passaggi e così via. Si applica solo alla modalità di cucito progressiva." -#: lib/elements/stroke.py:57 +#: lib/elements/stroke.py:62 msgid "Length of stitches in zig-zag mode." msgstr "Lunghezza dei punti nel modo zig-zag." -#: lib/elements/stroke.py:68 +#: lib/elements/stroke.py:73 msgid "Repeats" msgstr "Ripetizioni" -#: lib/elements/stroke.py:69 +#: lib/elements/stroke.py:74 msgid "Defines how many times to run down and back along the path." msgstr "Definisce quante volte percorre avanti e indietro il percorso." -#: lib/elements/stroke.py:102 +#: lib/elements/stroke.py:107 msgid "Manual stitch placement" msgstr "Piazzamento manuale dei punti" -#: lib/elements/stroke.py:103 +#: lib/elements/stroke.py:108 msgid "Stitch every node in the path. Stitch length and zig-zag spacing are ignored." msgstr "Cuci ogni nodo del percorso. La lunghezza del punto e lo spazio nel zig-zag sono ignorati." -#: lib/elements/stroke.py:137 +#: lib/elements/stroke.py:142 msgid "Legacy running stitch setting detected!\n\n" "It looks like you're using a stroke smaller than 0.5 units to indicate a running stitch, which is deprecated. Instead, please set your stroke to be dashed to indicate running stitch. Any kind of dash will work." msgstr "Rilevata vecchia impostazione del punto corrente!\n" "Sembra che tu stia utilizzando un tratto più piccolo di 0,5 unità per indicare un punto corrente, che è depracato. Invece, il tratto può essere impostato a tratteggio per indicare un punto corrente. Qualsiasi tipo di tratteggio andrà bene." -#: lib/elements/text.py:8 lib/extensions/lettering.py:63 +#: lib/elements/text.py:13 lib/extensions/lettering.py:68 msgid "Text" msgstr "Testo" -#: lib/elements/text.py:9 +#: lib/elements/text.py:14 msgid "Ink/Stitch cannot work with objects like text." msgstr "" -#: lib/elements/text.py:11 +#: lib/elements/text.py:16 msgid "* Text: Create your own letters or try the lettering tool:" msgstr "" -#: lib/elements/text.py:12 +#: lib/elements/text.py:17 msgid "- Extensions > Ink/Stitch > Lettering" msgstr "" -#: lib/extensions/auto_satin.py:30 +#: lib/extensions/auto_satin.py:35 msgid "Please ensure that at most one start and end command is attached to the selected satin columns." msgstr "Assicurarsi che almeno un comando di avvio e di fine siano collegati alla colonna raso selezionata." #. auto-route satin columns extension -#: lib/extensions/auto_satin.py:44 +#: lib/extensions/auto_satin.py:49 msgid "Please select one or more satin columns." msgstr "Selezionare una o più colonne raso." -#: lib/extensions/auto_satin.py:49 +#: lib/extensions/auto_satin.py:54 msgid "Please select at least one satin column." msgstr "" #. This was previously: "No embroiderable paths selected." -#: lib/extensions/base.py:128 +#: lib/extensions/base.py:133 msgid "Ink/Stitch doesn't know how to work with any of the objects you've selected." msgstr "Ink/Stitch non riesce a lavorare con nessuno degli oggetti selezionati." -#: lib/extensions/base.py:130 +#: lib/extensions/base.py:135 msgid "There are no objects in the entire document that Ink/Stitch knows how to work with." msgstr "In tutto il documento non ci sono oggetti con cui Ink/Stitch sia in grado di lavorare." -#: lib/extensions/base.py:132 +#: lib/extensions/base.py:137 msgid "Tip: Select some objects and use Path -> Object to Path to convert them to paths." msgstr "" -#: lib/extensions/break_apart.py:26 +#: lib/extensions/break_apart.py:31 msgid "Please select one or more fill areas to break apart." msgstr "Seleziona una o più area di riempimento da dividere." -#: lib/extensions/cleanup.py:32 lib/extensions/cleanup.py:44 +#: lib/extensions/cleanup.py:37 lib/extensions/cleanup.py:49 #, python-format msgid "%s elements removed" msgstr "" -#: lib/extensions/convert_to_satin.py:31 +#: lib/extensions/convert_to_satin.py:36 msgid "Please select at least one line to convert to a satin column." msgstr "Seleziona almeno una linea per convertirla in una colonna raso." #. : Convert To Satin extension, user selected one or more objects that were #. not lines. -#: lib/extensions/convert_to_satin.py:36 +#: lib/extensions/convert_to_satin.py:41 msgid "Only simple lines may be converted to satin columns." msgstr "Solo linee semplici possono essere convertite in colonne raso." -#: lib/extensions/convert_to_satin.py:130 +#: lib/extensions/convert_to_satin.py:135 msgid "Ink/Stitch cannot convert your stroke into a satin column. Please break up your path and try again." msgstr "" -#: lib/extensions/cut_satin.py:15 +#: lib/extensions/cut_satin.py:20 msgid "Please select one or more satin columns to cut." msgstr "Selezionare una o più colonne raso da tagliare." #. will have the satin's id prepended, like this: #. path12345: error: this satin column does not ... -#: lib/extensions/cut_satin.py:25 +#: lib/extensions/cut_satin.py:30 msgid "this satin column does not have a \"satin column cut point\" command attached to it. Please use the \"Attach commands\" extension and attach the \"Satin Column cut point\" command first." msgstr "questa colonna raso non ha un commando \"punto di taglio colonna raso\" collegato. Usare l'estensione \"Collega comandi\" e collegare il il comando \"Punto di taglio colonna raso\"." -#: lib/extensions/flip.py:23 +#: lib/extensions/flip.py:28 msgid "Please select one or more satin columns to flip." msgstr "Selezionare una o più colonne raso da ribaltare." -#: lib/extensions/import_threadlist.py:28 +#: lib/extensions/import_threadlist.py:33 msgid "File not found." msgstr "File non trovato." -#: lib/extensions/import_threadlist.py:31 +#: lib/extensions/import_threadlist.py:36 msgid "The filepath specified is not a file but a dictionary.\n" "Please choose a threadlist file to import." msgstr "" -#: lib/extensions/import_threadlist.py:41 +#: lib/extensions/import_threadlist.py:46 msgid "Couldn't find any matching colors in the file." msgstr "Non è stato trovato nessun colore combaciante." -#: lib/extensions/import_threadlist.py:43 +#: lib/extensions/import_threadlist.py:48 msgid "Please try to import as \"other threadlist\" and specify a color palette below." msgstr "Si provi ad importare come \"altra lista di fili\" e specificare una palette di colori in basso." -#: lib/extensions/import_threadlist.py:45 +#: lib/extensions/import_threadlist.py:50 msgid "Please chose an other color palette for your design." msgstr "Si selezioni un'altra palette di colori per il tuo design." -#: lib/extensions/layer_commands.py:18 +#: lib/extensions/layer_commands.py:23 msgid "Please choose one or more commands to add." msgstr "Seleziona uno o più comandi da aggiungere." -#: lib/extensions/lettering.py:32 lib/extensions/lettering.py:409 +#: lib/extensions/lettering.py:37 lib/extensions/lettering.py:414 msgid "Ink/Stitch Lettering" msgstr "Caratteri Ink/Stitch" -#: lib/extensions/lettering.py:39 +#: lib/extensions/lettering.py:44 msgid "Font" msgstr "" -#: lib/extensions/lettering.py:51 +#: lib/extensions/lettering.py:56 msgid "Options" msgstr "Opzioni" -#: lib/extensions/lettering.py:56 +#: lib/extensions/lettering.py:61 msgid "Stitch lines of text back and forth" msgstr "Cucire le linee di testo avanti e indietro" -#: lib/extensions/lettering.py:59 +#: lib/extensions/lettering.py:64 msgid "Add trims" msgstr "Aggiungi tagli" -#: lib/extensions/lettering.py:68 lib/extensions/params.py:343 +#: lib/extensions/lettering.py:73 lib/extensions/params.py:348 #: print/templates/custom-page.html:23 print/templates/custom-page.html:27 #: print/templates/custom-page.html:33 print/templates/ui.html:92 #: print/templates/ui.html:96 print/templates/ui.html:102 @@ -877,376 +877,380 @@ msgstr "Aggiungi tagli" msgid "Cancel" msgstr "Annulla" -#: lib/extensions/lettering.py:72 lib/extensions/params.py:350 +#: lib/extensions/lettering.py:77 lib/extensions/params.py:355 msgid "Apply and Quit" msgstr "Applica ed esci" -#: lib/extensions/lettering.py:139 +#: lib/extensions/lettering.py:144 msgid "Unable to find any fonts! Please try reinstalling Ink/Stitch." msgstr "Nessun font disponibile! Provare ad installare nuovamente Ink/Stitch." -#: lib/extensions/lettering.py:213 +#: lib/extensions/lettering.py:218 msgid "This font has no available font variant. Please update or remove the font." msgstr "" #. The user has chosen to scale the text by some percentage #. (50%, 200%, etc). If you need to use the percentage symbol, #. make sure to double it (%%). -#: lib/extensions/lettering.py:255 +#: lib/extensions/lettering.py:260 #, python-format msgid "Text scale %s%%" msgstr "Scala del testo %s%%" -#: lib/extensions/lettering.py:398 +#: lib/extensions/lettering.py:403 msgid "Please select only one block of text." msgstr "Selezionare solo un blocco di testo." -#: lib/extensions/lettering.py:401 +#: lib/extensions/lettering.py:406 msgid "You've selected objects that were not created by the Lettering extension. Please clear your selection or select different objects before running Lettering again." msgstr "Hai selezionato degli oggetti che non sono stati creati dalla estensione Caratteri. Si provi a liberare la tua selezione o selezionare oggetti diversi prima di avviare Caratteri di nuovo." -#: lib/extensions/lettering_custom_font_dir.py:22 +#: lib/extensions/lettering_custom_font_dir.py:27 msgid "Please specify the directory of your custom fonts." msgstr "" -#: lib/extensions/lettering_generate_json.py:35 +#: lib/extensions/lettering_generate_json.py:41 msgid "Please specify a font file." msgstr "" -#: lib/extensions/object_commands.py:16 +#: lib/extensions/object_commands.py:21 msgid "Please select one or more objects to which to attach commands." msgstr "Selezionare uno o più oggetti a cui collegare comandi." -#: lib/extensions/object_commands.py:24 +#: lib/extensions/object_commands.py:29 msgid "Please choose one or more commands to attach." msgstr "Selezionare uno o più comandi da collegare." -#: lib/extensions/params.py:203 +#: lib/extensions/params.py:208 msgid "These settings will be applied to 1 object." msgstr "Queste impostazioni saranno applicate ad un oggetto." -#: lib/extensions/params.py:205 +#: lib/extensions/params.py:210 #, python-format msgid "These settings will be applied to %d objects." msgstr "Queste impostazioni saranno applicate agli oggetti %d." -#: lib/extensions/params.py:208 +#: lib/extensions/params.py:213 msgid "Some settings had different values across objects. Select a value from the dropdown or enter a new one." msgstr "Alcuni parametri hanno valori diversi tra gli oggetti. Selezionare un valore dalla lista a discesa o inserirne uno." -#: lib/extensions/params.py:212 +#: lib/extensions/params.py:217 #, python-format msgid "Disabling this tab will disable the following %d tabs." msgstr "Disabilitando questa scheda saranno disabilitate le schede seguenti: %d ." -#: lib/extensions/params.py:214 +#: lib/extensions/params.py:219 msgid "Disabling this tab will disable the following tab." msgstr "Disabilitando questa scheda saranno disabilitate le schede seguenti." -#: lib/extensions/params.py:217 +#: lib/extensions/params.py:222 #, python-format msgid "Enabling this tab will disable %s and vice-versa." msgstr "Abilitando questa scheda sarà disabilitata %s e viceversa." -#: lib/extensions/params.py:247 +#: lib/extensions/params.py:252 msgid "Inkscape objects" msgstr "Oggetti Inkscape" -#: lib/extensions/params.py:308 +#: lib/extensions/params.py:313 msgid "Click to force this parameter to be saved when you click \"Apply and Quit\"" msgstr "Clicca per fare in modo che questo parametro venga salvato quando si premere \"Applica ed esci\"" -#: lib/extensions/params.py:316 +#: lib/extensions/params.py:321 msgid "This parameter will be saved when you click \"Apply and Quit\"" msgstr "Questo parametro sarà salvato quando verrà premuto \"Applica ed esci\"" -#: lib/extensions/params.py:332 +#: lib/extensions/params.py:337 msgid "Embroidery Params" msgstr "Parametri di ricamo" -#: lib/extensions/params.py:347 +#: lib/extensions/params.py:352 msgid "Use Last Settings" msgstr "Utilizza le ultime impostazioni" -#: lib/extensions/troubleshoot.py:43 +#: lib/extensions/transfer_params.py:19 +msgid "This function transfers Ink/Stitch parameters from the first selected element to the rest of the selection. Please select at least two elements." +msgstr "" + +#: lib/extensions/troubleshoot.py:48 msgid "All selected shapes are valid! " msgstr "" -#: lib/extensions/troubleshoot.py:45 +#: lib/extensions/troubleshoot.py:50 msgid "If you are still having trouble with a shape not being embroidered, check if it is in a layer with an ignore command." msgstr "" -#: lib/extensions/troubleshoot.py:71 +#: lib/extensions/troubleshoot.py:76 msgid "Invalid Pointer" msgstr "Puntatore non valido" -#: lib/extensions/troubleshoot.py:80 templates/lettering_generate_json.xml:26 +#: lib/extensions/troubleshoot.py:85 templates/lettering_generate_json.xml:26 msgid "Description" msgstr "Descrizione" -#: lib/extensions/troubleshoot.py:102 lib/extensions/troubleshoot.py:160 +#: lib/extensions/troubleshoot.py:107 lib/extensions/troubleshoot.py:165 #: templates/cleanup.xml:17 templates/remove_embroidery_settings.xml:16 #: templates/troubleshoot.xml:10 msgid "Troubleshoot" msgstr "Risoluzione problemi" -#: lib/extensions/troubleshoot.py:118 lib/extensions/troubleshoot.py:167 +#: lib/extensions/troubleshoot.py:123 lib/extensions/troubleshoot.py:172 msgid "Errors" msgstr "Errori" -#: lib/extensions/troubleshoot.py:127 lib/extensions/troubleshoot.py:171 +#: lib/extensions/troubleshoot.py:132 lib/extensions/troubleshoot.py:176 msgid "Warnings" msgstr "Avvertimenti" -#: lib/extensions/troubleshoot.py:136 +#: lib/extensions/troubleshoot.py:141 msgid "Type Warnings" msgstr "" -#: lib/extensions/troubleshoot.py:168 +#: lib/extensions/troubleshoot.py:173 msgid "Problems that will prevent the shape from being embroidered." msgstr "" -#: lib/extensions/troubleshoot.py:172 +#: lib/extensions/troubleshoot.py:177 msgid "These are problems that won't prevent the shape from being embroidered. You should consider to fix the warning, but if you don't, Ink/Stitch will do its best to process the object." msgstr "" -#: lib/extensions/troubleshoot.py:177 +#: lib/extensions/troubleshoot.py:182 msgid "Object Type Warnings" msgstr "" -#: lib/extensions/troubleshoot.py:178 +#: lib/extensions/troubleshoot.py:183 msgid "Ink/Stitch only knows how to works with paths and ignores everything else. You might want these shapes to be ignored, but if you don't, follow the instructions to change this behaviour." msgstr "" -#: lib/extensions/troubleshoot.py:195 +#: lib/extensions/troubleshoot.py:200 msgid "It is possible, that one object contains more than one error, yet there will be only one pointer per object. Run this function again, when further errors occur. Remove pointers by deleting the layer named \"Troubleshoot\" through the objects panel (Object -> Objects...)." msgstr "Potrebbe accadere che un oggetto contenga più di un errore, ma ci sarà comunque un solo puntatore per oggetto. Eseguire questa funzione un'altra volta, se si verificano ulteriori errori. Rimuovere i puntatori cancellando il livello chiamato \"Risoluzione problemi\" attraverso il pannello degli oggetti (Oggetto -> Oggetti...)." -#: lib/extensions/zip.py:57 +#: lib/extensions/zip.py:62 msgid "threadlist" msgstr "lista di fili" -#: lib/extensions/zip.py:66 +#: lib/extensions/zip.py:71 msgid "No embroidery file formats selected." msgstr "Non è stato selezionato nessun formato di file per il ricamo." -#: lib/extensions/zip.py:94 +#: lib/extensions/zip.py:99 msgid "Design Details" msgstr "Dettagli del Design" -#: lib/extensions/zip.py:97 +#: lib/extensions/zip.py:102 msgid "Title" msgstr "Titolo" -#: lib/extensions/zip.py:98 +#: lib/extensions/zip.py:103 msgid "Size" msgstr "Dimensioni" -#: lib/extensions/zip.py:99 +#: lib/extensions/zip.py:104 msgid "Stitches" msgstr "Punti" -#: lib/extensions/zip.py:100 +#: lib/extensions/zip.py:105 msgid "Colors" msgstr "Colori" -#: lib/extensions/zip.py:102 +#: lib/extensions/zip.py:107 msgid "Thread Order" msgstr "Ordine di punto" -#: lib/extensions/zip.py:115 +#: lib/extensions/zip.py:120 msgid "Thread Used" msgstr "Filo Utilizzato" -#: lib/gui/presets.py:47 +#: lib/gui/presets.py:52 msgid "Presets" msgstr "Impostazioni iniziali" -#: lib/gui/presets.py:53 +#: lib/gui/presets.py:58 msgid "Load" msgstr "Caricare" -#: lib/gui/presets.py:56 +#: lib/gui/presets.py:61 msgid "Add" msgstr "Aggiungere" -#: lib/gui/presets.py:59 +#: lib/gui/presets.py:64 msgid "Overwrite" msgstr "Sovrascrivere" -#: lib/gui/presets.py:62 +#: lib/gui/presets.py:67 msgid "Delete" msgstr "Cancellare" -#: lib/gui/presets.py:121 +#: lib/gui/presets.py:126 msgid "Please enter or select a preset name first." msgstr "Inserire o selezionare un nome di configurazione." -#: lib/gui/presets.py:121 lib/gui/presets.py:127 lib/gui/presets.py:143 +#: lib/gui/presets.py:126 lib/gui/presets.py:132 lib/gui/presets.py:148 msgid "Preset" msgstr "Configurazione iniziale" -#: lib/gui/presets.py:127 +#: lib/gui/presets.py:132 #, python-format msgid "Preset \"%s\" not found." msgstr "Configurazione \"%s\" non trovata." -#: lib/gui/presets.py:143 +#: lib/gui/presets.py:148 #, python-format msgid "Preset \"%s\" already exists. Please use another name or press \"Overwrite\"" msgstr "La configurazione \"%s\" è già esistente. Utilizzare un nome diverso o premere \"Sovrascrivi\"" -#: lib/gui/simulator.py:15 electron/src/renderer/assets/js/simulator.js:132 +#: lib/gui/simulator.py:20 electron/src/renderer/assets/js/simulator.js:140 msgid "JUMP" msgstr "SALTARE" -#: lib/gui/simulator.py:15 electron/src/renderer/assets/js/simulator.js:135 +#: lib/gui/simulator.py:20 electron/src/renderer/assets/js/simulator.js:143 msgid "TRIM" msgstr "TAGLIARE" #. #-#-#-#-# messages-babel.po (PROJECT VERSION) #-#-#-#-# #. command label at bottom of simulator window -#: lib/gui/simulator.py:15 templates/output_params_txt.xml:14 -#: electron/src/renderer/assets/js/simulator.js:129 +#: lib/gui/simulator.py:20 templates/output_params_txt.xml:14 +#: electron/src/renderer/assets/js/simulator.js:137 msgid "STITCH" msgstr "CUCIRE" -#: lib/gui/simulator.py:15 templates/output_params_txt.xml:16 -#: electron/src/renderer/assets/js/simulator.js:141 +#: lib/gui/simulator.py:20 templates/output_params_txt.xml:16 +#: electron/src/renderer/assets/js/simulator.js:149 msgid "COLOR CHANGE" msgstr "CAMBIO COLORE" -#: lib/gui/simulator.py:15 templates/output_params_txt.xml:18 -#: electron/src/renderer/assets/js/simulator.js:138 +#: lib/gui/simulator.py:20 templates/output_params_txt.xml:18 +#: electron/src/renderer/assets/js/simulator.js:146 msgid "STOP" msgstr "FERMARE" -#: lib/gui/simulator.py:47 +#: lib/gui/simulator.py:52 msgid "Slow down (arrow down)" msgstr "Rallentare (freccia giù)" -#: lib/gui/simulator.py:50 +#: lib/gui/simulator.py:55 msgid "Speed up (arrow up)" msgstr "Accelerare (freccia su)" -#: lib/gui/simulator.py:53 +#: lib/gui/simulator.py:58 msgid "Go on step backward (-)" msgstr "Vai al passo indietro (-)" -#: lib/gui/simulator.py:56 +#: lib/gui/simulator.py:61 msgid "Go on step forward (+)" msgstr "Vai al passo avanti (+)" -#: lib/gui/simulator.py:59 +#: lib/gui/simulator.py:64 msgid "Switch direction (arrow left | arrow right)" msgstr "Inverti direzione (freccia sinistra | freccia destra)" -#: lib/gui/simulator.py:60 lib/gui/simulator.py:236 lib/gui/simulator.py:243 +#: lib/gui/simulator.py:65 lib/gui/simulator.py:241 lib/gui/simulator.py:248 #: electron/src/renderer/components/Simulator.vue:29 msgid "Pause" msgstr "Pausa" -#: lib/gui/simulator.py:62 +#: lib/gui/simulator.py:67 msgid "Pause (P)" msgstr "Pausa (P)" -#: lib/gui/simulator.py:63 +#: lib/gui/simulator.py:68 msgid "Restart" msgstr "Riavviare" -#: lib/gui/simulator.py:65 +#: lib/gui/simulator.py:70 msgid "Restart (R)" msgstr "Riavviare (R)" -#: lib/gui/simulator.py:66 +#: lib/gui/simulator.py:71 msgid "O" msgstr "O" -#: lib/gui/simulator.py:68 +#: lib/gui/simulator.py:73 msgid "Display needle penetration point (O)" msgstr "Visualizza il punti di entrata dell'ago (O)" -#: lib/gui/simulator.py:69 +#: lib/gui/simulator.py:74 msgid "Quit" msgstr "Esci" -#: lib/gui/simulator.py:71 +#: lib/gui/simulator.py:76 msgid "Quit (Q)" msgstr "Esci (Q)" -#: lib/gui/simulator.py:183 +#: lib/gui/simulator.py:188 #, python-format msgid "Speed: %d stitches/sec" msgstr "Velocità: %d punti/s" -#: lib/gui/simulator.py:239 lib/gui/simulator.py:267 +#: lib/gui/simulator.py:244 lib/gui/simulator.py:272 msgid "Start" msgstr "Avvio" -#: lib/gui/simulator.py:813 lib/gui/simulator.py:825 +#: lib/gui/simulator.py:818 lib/gui/simulator.py:830 msgid "Preview" msgstr "Anteprima" -#: lib/gui/simulator.py:829 +#: lib/gui/simulator.py:834 msgid "Internal Error" msgstr "Errore interno" -#: lib/gui/simulator.py:858 +#: lib/gui/simulator.py:863 msgid "Embroidery Simulation" msgstr "Simulazione di ricamo" #. If you translate this string, that will tell Ink/Stitch to #. generate menu items for this language in Inkscape's "Extensions" #. menu. -#: lib/inx/utils.py:81 +#: lib/inx/utils.py:86 msgid "Generate INX files" msgstr "Genera file INX" -#: lib/lettering/font.py:152 +#: lib/lettering/font.py:158 #, python-format msgid "The font '%s' has no variants." msgstr "" #. low-level file error. %(error)s is (hopefully?) translated by #. the user's system automatically. -#: lib/output.py:96 +#: lib/output.py:101 #, python-format msgid "Error writing to %(path)s: %(error)s" msgstr "Errore scrivendo in %(path)s: %(error)s" -#: lib/stitches/auto_satin.py:653 +#: lib/stitches/auto_satin.py:658 msgid "Auto-Satin" msgstr "Auto-raso" #. Label for a satin column created by Auto-Route Satin Columns and Lettering #. extensions -#: lib/stitches/auto_satin.py:700 +#: lib/stitches/auto_satin.py:705 #, python-format msgid "AutoSatin %d" msgstr "AutoRaso %d" #. Label for running stitch (underpathing) created by Auto-Route Satin Columns #. amd Lettering extensions -#: lib/stitches/auto_satin.py:703 +#: lib/stitches/auto_satin.py:708 #, python-format msgid "AutoSatin Running Stitch %d" msgstr "Punto progressivo AutoRase %d" -#: lib/svg/rendering.py:219 +#: lib/svg/rendering.py:224 msgid "Stitch Plan" msgstr "Piano di cucitura" -#: lib/svg/units.py:13 +#: lib/svg/units.py:18 #, python-format msgid "parseLengthWithUnits: unknown unit %s" msgstr "parseLengthWithUnits: unità sconosciuta %s" -#: lib/utils/version.py:14 +#: lib/utils/version.py:19 #, python-format msgid "Ink/Stitch Version: %s" msgstr "" -#: lib/utils/version.py:16 +#: lib/utils/version.py:21 msgid "Ink/Stitch Version: unkown" msgstr "" @@ -1464,7 +1468,6 @@ msgid "Save PDF" msgstr "Salva PDF" #: print/templates/ui.html:6 print/templates/ui.html:16 -#: templates/embroider_settings.xml:3 msgid "Settings" msgstr "Impostazioni" @@ -1601,7 +1604,7 @@ msgstr "La modifica della paletta dei fili comporterà la ridefinizione dei nomi msgid "Yes" msgstr "Si" -#: print/templates/ui.html:170 +#: print/templates/ui.html:170 templates/lettering_generate_json.xml:37 msgid "No" msgstr "No" @@ -1888,6 +1891,10 @@ msgstr "" msgid "Visualise and Export" msgstr "" +#: templates/embroider_settings.xml:3 +msgid "Preferences" +msgstr "" + #: templates/embroider_settings.xml:13 msgid "Output Settings" msgstr "" @@ -2002,53 +2009,65 @@ msgstr "" msgid "If disabled back and forth stitching will not be possile for this font." msgstr "" +#: templates/lettering_generate_json.xml:36 +msgid "Force letter case" +msgstr "" + #: templates/lettering_generate_json.xml:38 -msgid "Min Scale" +msgid "Upper" msgstr "" #: templates/lettering_generate_json.xml:39 -msgid "Max Scale" +msgid "Lower" msgstr "" #: templates/lettering_generate_json.xml:43 +msgid "Min Scale" +msgstr "" + +#: templates/lettering_generate_json.xml:44 +msgid "Max Scale" +msgstr "" + +#: templates/lettering_generate_json.xml:48 msgid "Default Glyph" msgstr "" -#: templates/lettering_generate_json.xml:47 +#: templates/lettering_generate_json.xml:52 msgid "Kerning" msgstr "" -#: templates/lettering_generate_json.xml:49 +#: templates/lettering_generate_json.xml:54 msgid "If your font file contains kerning information, you can completely ignore the following settings (unless you want to overwrite them).\n" " If the kerning information cannot be found, these values will apply automatically." msgstr "" -#: templates/lettering_generate_json.xml:54 -#: templates/lettering_generate_json.xml:61 +#: templates/lettering_generate_json.xml:59 +#: templates/lettering_generate_json.xml:66 msgid "Force" msgstr "" -#: templates/lettering_generate_json.xml:55 +#: templates/lettering_generate_json.xml:60 msgid "Overwrite leading information from font file." msgstr "" -#: templates/lettering_generate_json.xml:56 +#: templates/lettering_generate_json.xml:61 msgid "Leading (px)" msgstr "" -#: templates/lettering_generate_json.xml:57 +#: templates/lettering_generate_json.xml:62 msgid "Line height (default: 100)" msgstr "" -#: templates/lettering_generate_json.xml:62 +#: templates/lettering_generate_json.xml:67 msgid "Overwrite word spacing information from font file." msgstr "" -#: templates/lettering_generate_json.xml:63 +#: templates/lettering_generate_json.xml:68 msgid "Word spacing (px)" msgstr "" -#: templates/lettering_generate_json.xml:64 +#: templates/lettering_generate_json.xml:69 msgid "Space character width (default: 20)" msgstr "" @@ -2234,6 +2253,10 @@ msgstr "" msgid "Stitch Plan Preview" msgstr "Anteprima del Piano di Punto" +#: templates/transfer_params.xml:3 +msgid "Transfer Params" +msgstr "" + #: templates/troubleshoot.xml:3 msgid "Troubleshoot Objects" msgstr "Oggetti per la risoluzione dei problemi" -- cgit v1.3.1