From 67bba9c466566022f4f8e58e1c8f6146faceaef1 Mon Sep 17 00:00:00 2001 From: Ink/Stitch Crowdin integration Date: Wed, 5 Jun 2024 01:11:54 +0000 Subject: new translations from Crowdin --- translations/messages_nl_NL.po | 168 +++++++++++++++++++++++++++-------------- 1 file changed, 110 insertions(+), 58 deletions(-) (limited to 'translations/messages_nl_NL.po') diff --git a/translations/messages_nl_NL.po b/translations/messages_nl_NL.po index f3e48fef..4acf4e92 100644 --- a/translations/messages_nl_NL.po +++ b/translations/messages_nl_NL.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2024-06-04 01:11+0000\n" -"PO-Revision-Date: 2024-06-04 01:11\n" +"POT-Creation-Date: 2024-06-05 01:11+0000\n" +"PO-Revision-Date: 2024-06-05 01:11\n" "Last-Translator: \n" "Language-Team: Dutch\n" "MIME-Version: 1.0\n" @@ -12,7 +12,7 @@ msgstr "" "Generated-By: Babel 2.15.0\n" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-04 01:11+0000\n" +"POT-Creation-Date: 2024-06-05 01:11+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: \n" "Language-Team: LANGUAGE \n" @@ -1997,7 +1997,7 @@ msgstr "" msgid "For an odd number of repeats, this will reverse the direction the satin column is stitched, causing stitching to both begin and end at the start point." msgstr "" -#: lib/elements/satin_column.py:452 lib/gui/tartan/customize_panel.py:39 +#: lib/elements/satin_column.py:452 lib/gui/tartan/customize_panel.py:38 msgid "Position" msgstr "" @@ -2203,7 +2203,7 @@ msgstr "Eindschaal" msgid "How big the last copy of the line should be, in percent." msgstr "Hoe groot het laatste exemplaar van de regel moet zijn, in procenten." -#: lib/elements/stroke.py:371 lib/gui/tartan/customize_panel.py:44 +#: lib/elements/stroke.py:371 lib/gui/tartan/customize_panel.py:43 msgid "Rotate" msgstr "Draaien" @@ -2645,32 +2645,32 @@ msgstr "" msgid "Re-roll" msgstr "" -#: lib/extensions/params.py:461 +#: lib/extensions/params.py:462 msgid "Click to force this parameter to be saved when you click \"Apply and Quit\"" msgstr "Klik om deze parameter op te slaan als je \"Toepassen en Afsluiten\" kiest" -#: lib/extensions/params.py:471 +#: lib/extensions/params.py:472 msgid "This parameter will be saved when you click \"Apply and Quit\"" msgstr "Deze parameter wordt opgeslagen als je \"Toepassen en Afsluiten\" klikt" -#: lib/extensions/params.py:498 lib/gui/lettering/main_panel.py:58 +#: lib/extensions/params.py:499 lib/gui/lettering/main_panel.py:58 #: lib/gui/lettering_font_sample.py:57 -#: lib/gui/satin_multicolor/main_panel.py:54 lib/gui/tartan/main_panel.py:66 +#: lib/gui/satin_multicolor/main_panel.py:54 lib/gui/tartan/main_panel.py:67 #: print/templates/custom-page.html:23 print/templates/custom-page.html:27 #: print/templates/custom-page.html:33 print/templates/ui.html:101 #: print/templates/ui.html:105 print/templates/ui.html:111 msgid "Cancel" msgstr "Annuleren" -#: lib/extensions/params.py:503 +#: lib/extensions/params.py:504 msgid "Use Last Settings" msgstr "Gebruik Vorige Instellingen" -#: lib/extensions/params.py:506 lib/gui/lettering/main_panel.py:56 +#: lib/extensions/params.py:507 lib/gui/lettering/main_panel.py:56 msgid "Apply and Quit" msgstr "Toepassen en Sluiten" -#: lib/extensions/params.py:786 +#: lib/extensions/params.py:787 msgid "Embroidery Params" msgstr "Borduur Parameters" @@ -2691,6 +2691,26 @@ msgstr "" msgid "Ink/Stitch Print" msgstr "" +#: lib/extensions/redwork.py:48 +msgid "Please select one or more strokes." +msgstr "" + +#: lib/extensions/redwork.py:103 +msgid "Redwork Group" +msgstr "" + +#: lib/extensions/redwork.py:112 +msgid "Connected Group" +msgstr "" + +#: lib/extensions/redwork.py:121 inx/inkstitch_redwork.inx:3 +msgid "Redwork" +msgstr "" + +#: lib/extensions/redwork.py:126 +msgid "Redwork Underpath" +msgstr "" + #: lib/extensions/reorder.py:20 msgid "Please select at least two elements to reorder." msgstr "Selecteer ten minste twee elementen om te hergroeperen." @@ -2861,7 +2881,7 @@ msgstr "" #: lib/gui/element_info.py:41 lib/gui/lettering/main_panel.py:48 #: lib/gui/lettering_font_sample.py:70 -#: lib/gui/satin_multicolor/main_panel.py:51 lib/gui/tartan/main_panel.py:63 +#: lib/gui/satin_multicolor/main_panel.py:51 lib/gui/tartan/main_panel.py:64 #: lib/gui/test_swatches.py:83 inx/inkstitch_apply_palette.inx:84 #: inx/inkstitch_apply_threadlist.inx:89 inx/inkstitch_auto_run.inx:23 #: inx/inkstitch_auto_satin.inx:12 inx/inkstitch_break_apart.inx:14 @@ -2879,7 +2899,7 @@ msgstr "" #: inx/inkstitch_lettering_remove_kerning.inx:12 #: inx/inkstitch_lettering_update_json_glyphlist.inx:12 #: inx/inkstitch_letters_to_font.inx:56 inx/inkstitch_outline.inx:25 -#: inx/inkstitch_palette_to_text.inx:19 +#: inx/inkstitch_palette_to_text.inx:19 inx/inkstitch_redwork.inx:23 #: inx/inkstitch_remove_embroidery_settings.inx:142 #: inx/inkstitch_select_elements.inx:80 #: inx/inkstitch_stitch_plan_preview.inx:37 @@ -3015,7 +3035,7 @@ msgstr "Instellingen" msgid "Stitch direction" msgstr "" -#: lib/gui/lettering_font_sample.py:44 lib/gui/tartan/customize_panel.py:47 +#: lib/gui/lettering_font_sample.py:44 lib/gui/tartan/customize_panel.py:46 msgid "Scale (%)" msgstr "" @@ -3024,7 +3044,7 @@ msgid "Max. line width" msgstr "" #: lib/gui/lettering_font_sample.py:59 -#: lib/gui/satin_multicolor/main_panel.py:56 lib/gui/tartan/main_panel.py:68 +#: lib/gui/satin_multicolor/main_panel.py:56 lib/gui/tartan/main_panel.py:69 #: lib/gui/test_swatches.py:117 msgid "Apply" msgstr "" @@ -3099,7 +3119,7 @@ msgid "Load" msgstr "Laden" #: lib/gui/presets.py:61 lib/gui/satin_multicolor/colorize_panel.py:74 -#: lib/gui/tartan/customize_panel.py:65 lib/gui/tartan/customize_panel.py:67 +#: lib/gui/tartan/customize_panel.py:64 lib/gui/tartan/customize_panel.py:66 msgid "Add" msgstr "Toevoegen" @@ -3129,7 +3149,7 @@ msgstr "Voorkeuze \"%s\" niet gevonden." msgid "Preset \"%s\" already exists. Please use another name or press \"Overwrite\"" msgstr "Voorkeuze \"%s\" bestaat reeds. Gebruik een andere naam of kies \"Overschrijven\"" -#: lib/gui/satin_multicolor/color_panel.py:19 +#: lib/gui/satin_multicolor/color_panel.py:19 lib/gui/tartan/stripe_panel.py:19 msgid "Click to move color up." msgstr "" @@ -3189,7 +3209,7 @@ msgstr "" msgid "Overflow excluded" msgstr "" -#: lib/gui/satin_multicolor/colorize_panel.py:221 +#: lib/gui/satin_multicolor/colorize_panel.py:220 msgid "Total width: {width}%" msgstr "" @@ -3206,7 +3226,7 @@ msgstr "" msgid "Colorize" msgstr "" -#: lib/gui/satin_multicolor/main_panel.py:144 +#: lib/gui/satin_multicolor/main_panel.py:143 msgid "Multicolor Satin Group" msgstr "" @@ -3334,70 +3354,50 @@ msgstr "" msgid "Apply Code" msgstr "" -#: lib/gui/tartan/customize_panel.py:31 +#: lib/gui/tartan/customize_panel.py:30 msgid "Pattern Settings" msgstr "" -#: lib/gui/tartan/customize_panel.py:33 +#: lib/gui/tartan/customize_panel.py:32 msgid "Symmetrical / reflective sett" msgstr "" -#: lib/gui/tartan/customize_panel.py:34 +#: lib/gui/tartan/customize_panel.py:33 msgid "Disabled: asymmetrical / repeating sett" msgstr "" -#: lib/gui/tartan/customize_panel.py:36 +#: lib/gui/tartan/customize_panel.py:35 msgid "Equal threadcount for warp and weft" msgstr "" -#: lib/gui/tartan/customize_panel.py:51 +#: lib/gui/tartan/customize_panel.py:50 msgid "Offset X (mm)" msgstr "" -#: lib/gui/tartan/customize_panel.py:55 +#: lib/gui/tartan/customize_panel.py:54 msgid "Offset Y (mm)" msgstr "" -#: lib/gui/tartan/customize_panel.py:57 +#: lib/gui/tartan/customize_panel.py:56 msgid "Stripes" msgstr "" -#: lib/gui/tartan/customize_panel.py:59 +#: lib/gui/tartan/customize_panel.py:58 msgid "Link colors" msgstr "" -#: lib/gui/tartan/customize_panel.py:60 +#: lib/gui/tartan/customize_panel.py:59 msgid "When enabled update all equal colors simultaneously." msgstr "" -#: lib/gui/tartan/customize_panel.py:61 +#: lib/gui/tartan/customize_panel.py:60 msgid "Warp" msgstr "" -#: lib/gui/tartan/customize_panel.py:63 +#: lib/gui/tartan/customize_panel.py:62 msgid "Weft" msgstr "" -#: lib/gui/tartan/customize_panel.py:120 -msgid "Drag and drop to adjust position." -msgstr "" - -#: lib/gui/tartan/customize_panel.py:125 -msgid "Checked: stitch this stripe | Minus: spacer for strokes only | Disabled: spacer for fill and stroke" -msgstr "" - -#: lib/gui/tartan/customize_panel.py:135 -msgid "Select stripe color" -msgstr "" - -#: lib/gui/tartan/customize_panel.py:140 -msgid "Set stripe width (mm)" -msgstr "" - -#: lib/gui/tartan/customize_panel.py:144 -msgid "Remove stripe" -msgstr "" - #: lib/gui/tartan/embroidery_panel.py:25 msgid "Embroidery settings can be refined in the params dialog." msgstr "" @@ -3455,18 +3455,34 @@ msgstr "" msgid "https://inkstitch.org/docs/stitches/tartan-fill" msgstr "" -#: lib/gui/tartan/main_panel.py:53 +#: lib/gui/tartan/main_panel.py:54 msgid "Customize" msgstr "" -#: lib/gui/tartan/main_panel.py:57 +#: lib/gui/tartan/main_panel.py:58 msgid "Palette Code" msgstr "" -#: lib/gui/tartan/main_panel.py:60 +#: lib/gui/tartan/main_panel.py:61 msgid "Embroidery Settings" msgstr "" +#: lib/gui/tartan/stripe_panel.py:23 +msgid "Checked: stitch this stripe | Minus: spacer for strokes only | Disabled: spacer for fill and stroke" +msgstr "" + +#: lib/gui/tartan/stripe_panel.py:33 +msgid "Select stripe color" +msgstr "" + +#: lib/gui/tartan/stripe_panel.py:38 +msgid "Set stripe width (mm)" +msgstr "" + +#: lib/gui/tartan/stripe_panel.py:42 +msgid "Remove stripe" +msgstr "" + #: lib/gui/test_swatches.py:21 msgid "Generate Swatches" msgstr "" @@ -3486,7 +3502,7 @@ msgstr "" #: inx/inkstitch_lettering_remove_kerning.inx:9 #: inx/inkstitch_lettering_update_json_glyphlist.inx:8 #: inx/inkstitch_letters_to_font.inx:8 inx/inkstitch_outline.inx:8 -#: inx/inkstitch_palette_to_text.inx:15 +#: inx/inkstitch_palette_to_text.inx:15 inx/inkstitch_redwork.inx:8 #: inx/inkstitch_remove_embroidery_settings.inx:8 #: inx/inkstitch_stitch_plan_preview.inx:8 #: inx/inkstitch_stroke_to_lpe_satin.inx:7 inx/inkstitch_troubleshoot.inx:8 @@ -4399,7 +4415,7 @@ msgstr "Auto-route lopende steek" #: inx/inkstitch_auto_run.inx:10 inx/inkstitch_convert_to_stroke.inx:24 #: inx/inkstitch_fill_to_stroke.inx:10 inx/inkstitch_jump_to_stroke.inx:10 -#: inx/inkstitch_outline.inx:37 +#: inx/inkstitch_outline.inx:37 inx/inkstitch_redwork.inx:35 msgid "Tools: Stroke" msgstr "Gereedschap: Lijn" @@ -4466,8 +4482,8 @@ msgstr "" #: inx/inkstitch_lettering_remove_kerning.inx:22 #: inx/inkstitch_lettering_update_json_glyphlist.inx:15 #: inx/inkstitch_letters_to_font.inx:71 inx/inkstitch_outline.inx:28 -#: inx/inkstitch_stitch_plan_preview.inx:40 inx/inkstitch_troubleshoot.inx:15 -#: inx/inkstitch_unlink_clone.inx:13 +#: inx/inkstitch_redwork.inx:26 inx/inkstitch_stitch_plan_preview.inx:40 +#: inx/inkstitch_troubleshoot.inx:15 inx/inkstitch_unlink_clone.inx:13 msgid "More information on our website" msgstr "" @@ -6252,6 +6268,42 @@ msgstr "Params" msgid "PDF Export" msgstr "PDF Export" +#: inx/inkstitch_redwork.inx:11 +msgid "Connect lines below this distance (mm)" +msgstr "" + +#: inx/inkstitch_redwork.inx:11 +msgid "Unconnected lines may result in jump stitches" +msgstr "" + +#: inx/inkstitch_redwork.inx:14 +msgid "Minimum path length (mm)" +msgstr "" + +#: inx/inkstitch_redwork.inx:14 +msgid "Shorter paths will be removed from redwork result" +msgstr "" + +#: inx/inkstitch_redwork.inx:17 +msgid "Redwork stitch length (mm)" +msgstr "" + +#: inx/inkstitch_redwork.inx:17 +msgid "set redwork stitch length" +msgstr "" + +#: inx/inkstitch_redwork.inx:20 +msgid "Redwork bean stitch number of repeats" +msgstr "" + +#: inx/inkstitch_redwork.inx:24 +msgid "Redwork embroidery is a stroke art embroidery which passes every line exactly twice." +msgstr "" + +#: inx/inkstitch_redwork.inx:27 +msgid "https://inkstitch.org/docs/stroke-tools/#redwork" +msgstr "" + #: inx/inkstitch_remove_embroidery_settings.inx:3 msgid "Remove embroidery settings" msgstr "Verwijder Borduurinstellingen" -- cgit v1.3.1