From 74e9ba6600ea5d7db6bee50f18a465425632a2e1 Mon Sep 17 00:00:00 2001 From: Ink/Stitch Crowdin integration Date: Mon, 29 Jan 2024 01:06:12 +0000 Subject: new translations from Crowdin --- translations/messages_nl_NL.po | 203 ++++++++++++++++++++++------------------- 1 file changed, 108 insertions(+), 95 deletions(-) (limited to 'translations/messages_nl_NL.po') diff --git a/translations/messages_nl_NL.po b/translations/messages_nl_NL.po index 9c08ad23..3da18bfe 100644 --- a/translations/messages_nl_NL.po +++ b/translations/messages_nl_NL.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2024-01-15 01:11+0000\n" -"PO-Revision-Date: 2024-01-15 01:11\n" +"POT-Creation-Date: 2024-01-29 01:05+0000\n" +"PO-Revision-Date: 2024-01-29 01:05\n" "Last-Translator: \n" "Language-Team: Dutch\n" "MIME-Version: 1.0\n" @@ -16,7 +16,7 @@ msgstr "" "Project-Id-Version: \n" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-01-15 01:11+0000\n" +"POT-Creation-Date: 2024-01-29 01:05+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: \n" "Language-Team: LANGUAGE \n" @@ -1275,7 +1275,7 @@ msgstr "Uitbreiden" msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead." msgstr "De parameter Uitbreiden voor dit opvulobject kan niet worden toegepast. Ink/Stitch zal deze negeren en in plaats daarvan de oorspronkelijke grootte gebruiken." -#: lib/elements/fill_stitch.py:47 lib/elements/fill_stitch.py:491 +#: lib/elements/fill_stitch.py:47 lib/elements/fill_stitch.py:517 msgid "Inset" msgstr "Inzet" @@ -1311,15 +1311,15 @@ msgstr "De hulplijn van dit object ligt niet binnen de objectgrenzen. De hulplij msgid "* Move the guide line into the element" msgstr "* Verplaats de hulplijn in het element" -#: lib/elements/fill_stitch.py:71 lib/elements/stroke.py:27 +#: lib/elements/fill_stitch.py:71 lib/elements/stroke.py:28 msgid "Multiple Guide Lines" msgstr "Meerdere hulplijnen" -#: lib/elements/fill_stitch.py:72 lib/elements/stroke.py:28 +#: lib/elements/fill_stitch.py:72 lib/elements/stroke.py:29 msgid "This object has multiple guide lines, but only the first one will be used." msgstr "Dit object heeft meerdere hulplijnen, maar alleen de eerste zal worden gebruikt." -#: lib/elements/fill_stitch.py:74 lib/elements/stroke.py:30 +#: lib/elements/fill_stitch.py:74 lib/elements/stroke.py:31 msgid "* Remove all guide lines, except for one." msgstr "* Verwijder alle hulplijnen, behalve één." @@ -1524,11 +1524,11 @@ msgstr "Spring rijen zoveel keer in voordat herhaald wordt" msgid "Length of the cycle by which successive stitch rows are staggered. Fractional values are allowed and can have less visible diagonals than integer values." msgstr "" -#: lib/elements/fill_stitch.py:316 lib/elements/fill_stitch.py:503 +#: lib/elements/fill_stitch.py:316 lib/elements/fill_stitch.py:529 msgid "Skip last stitch in each row" msgstr "Sla de laatste steek in elke rij over" -#: lib/elements/fill_stitch.py:317 lib/elements/fill_stitch.py:504 +#: lib/elements/fill_stitch.py:317 lib/elements/fill_stitch.py:530 msgid "The last stitch in each row is quite close to the first stitch in the next row. Skipping it decreases stitch count and density." msgstr "De laatste steek in elke rij is vrij dicht op de eerste steek in de volgende rij. Door deze over te slaan wordt de dichtheid en het aantal steken verkleind." @@ -1548,15 +1548,15 @@ msgstr "" msgid "If this option is disabled, the ending point will only be used to define a general direction for stitch routing. When enabled the last section will end at the defined spot." msgstr "" -#: lib/elements/fill_stitch.py:358 lib/elements/fill_stitch.py:515 +#: lib/elements/fill_stitch.py:358 lib/elements/fill_stitch.py:541 msgid "Underpath" msgstr "Onderpad" -#: lib/elements/fill_stitch.py:359 lib/elements/fill_stitch.py:516 +#: lib/elements/fill_stitch.py:359 lib/elements/fill_stitch.py:542 msgid "Travel inside the shape when moving from section to section. Underpath stitches avoid traveling in the direction of the row angle so that they are not visible. This gives them a jagged appearance." msgstr "Beweeg binnen de vorm bij verplaatsen tussen secties. Onderpad steken vermijden de richting van de rijhoek zodat ze niet zichtbaar zijn. Dit geeft ze een gekarteld uiterlijk." -#: lib/elements/fill_stitch.py:371 lib/elements/stroke.py:108 +#: lib/elements/fill_stitch.py:371 lib/elements/stroke.py:109 msgid "Running stitch length" msgstr "Doorlopende steek lengte" @@ -1573,69 +1573,86 @@ msgid "Determines how hard Ink/Stitch tries to avoid stitching outside the shape msgstr "" #: lib/elements/fill_stitch.py:400 lib/elements/satin_column.py:385 -#: lib/elements/stroke.py:82 +#: lib/elements/stroke.py:83 msgid "Repeats" msgstr "Herhalingen" -#: lib/elements/fill_stitch.py:401 lib/elements/stroke.py:83 +#: lib/elements/fill_stitch.py:401 lib/elements/stroke.py:84 msgid "Defines how many times to run down and back along the path." msgstr "Bepaalt hoe vaak op en neer langs een pad wordt gegaan." -#: lib/elements/fill_stitch.py:412 lib/elements/stroke.py:94 +#: lib/elements/fill_stitch.py:412 lib/elements/stroke.py:95 msgid "Bean stitch number of repeats" msgstr "Bonensteek aantal herhalingen" -#: lib/elements/fill_stitch.py:413 lib/elements/stroke.py:95 +#: lib/elements/fill_stitch.py:413 lib/elements/stroke.py:96 msgid "Backtrack each stitch this many times. A value of 1 would triple each stitch (forward, back, forward). A value of 2 would quintuple each stitch, etc.\n\n" "A pattern with various repeats can be created with a list of values separated by a space." msgstr "" -#: lib/elements/fill_stitch.py:437 inx/inkstitch_select_elements.inx:33 +#: lib/elements/fill_stitch.py:427 lib/elements/satin_column.py:220 +#: lib/elements/stroke.py:149 +msgid "Zig-zag spacing (peak-to-peak)" +msgstr "Zig-zag afstand (piek-naar-piek)" + +#: lib/elements/fill_stitch.py:428 lib/elements/stroke.py:150 +msgid "Length of stitches in zig-zag mode." +msgstr "Lengte van steken in zig-zag modus." + +#: lib/elements/fill_stitch.py:440 +msgid "Zigzag width" +msgstr "" + +#: lib/elements/fill_stitch.py:441 +msgid "Width of the zigzag line." +msgstr "" + +#: lib/elements/fill_stitch.py:463 inx/inkstitch_select_elements.inx:33 #: inx/inkstitch_select_elements.inx:53 inx/inkstitch_select_elements.inx:55 msgid "Underlay" msgstr "Versteviging" -#: lib/elements/fill_stitch.py:437 lib/elements/fill_stitch.py:446 -#: lib/elements/fill_stitch.py:473 lib/elements/fill_stitch.py:484 -#: lib/elements/fill_stitch.py:494 lib/elements/fill_stitch.py:506 -#: lib/elements/fill_stitch.py:519 +#: lib/elements/fill_stitch.py:463 lib/elements/fill_stitch.py:472 +#: lib/elements/fill_stitch.py:499 lib/elements/fill_stitch.py:510 +#: lib/elements/fill_stitch.py:520 lib/elements/fill_stitch.py:532 +#: lib/elements/fill_stitch.py:545 msgid "Fill Underlay" msgstr "Vulling onderlaag" -#: lib/elements/fill_stitch.py:443 +#: lib/elements/fill_stitch.py:469 msgid "Fill angle" msgstr "Opvul hoek" -#: lib/elements/fill_stitch.py:444 +#: lib/elements/fill_stitch.py:470 msgid "Default: fill angle + 90 deg. Insert a list for multiple layers separated by a space." msgstr "" -#: lib/elements/fill_stitch.py:470 +#: lib/elements/fill_stitch.py:496 msgid "Row spacing" msgstr "Opvulrij afstand" -#: lib/elements/fill_stitch.py:471 +#: lib/elements/fill_stitch.py:497 msgid "default: 3x fill row spacing" msgstr "standaard: 3x opvulrij afstand" -#: lib/elements/fill_stitch.py:481 lib/elements/stroke.py:134 +#: lib/elements/fill_stitch.py:507 lib/elements/stroke.py:135 #: lib/extensions/element_info.py:110 lib/extensions/element_info.py:166 msgid "Max stitch length" msgstr "Max steek lengte" -#: lib/elements/fill_stitch.py:482 +#: lib/elements/fill_stitch.py:508 msgid "default: equal to fill max stitch length" msgstr "standaard: gelijk aan max steek lengte" -#: lib/elements/fill_stitch.py:492 +#: lib/elements/fill_stitch.py:518 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill." msgstr "Verklein de vorm van de versteviging om te voorkomen dat de versteviging zichtbaar is aan de buitenkant van de opvulling." -#: lib/elements/fill_stitch.py:527 lib/elements/satin_column.py:466 +#: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:466 msgid "Random seed" msgstr "" -#: lib/elements/fill_stitch.py:528 lib/elements/satin_column.py:467 +#: lib/elements/fill_stitch.py:554 lib/elements/satin_column.py:467 msgid "Use a specific seed for randomized attributes. Uses the element ID if empty." msgstr "" @@ -1703,7 +1720,7 @@ msgstr "* Optioneel: Kies het Params menu en vink het \"handmatige steek\" vakje msgid "Manual stitch along path" msgstr "Handmatige steek langs het pad" -#: lib/elements/satin_column.py:31 lib/elements/stroke.py:35 +#: lib/elements/satin_column.py:31 lib/elements/stroke.py:36 msgid "Too few subpaths" msgstr "Te weinig subpaden" @@ -1800,7 +1817,7 @@ msgstr "" msgid "Zig-zag" msgstr "" -#: lib/elements/satin_column.py:90 lib/elements/stroke.py:72 +#: lib/elements/satin_column.py:90 lib/elements/stroke.py:73 #: inx/inkstitch_break_apart.inx:17 msgid "Method" msgstr "Methode" @@ -1904,10 +1921,6 @@ msgstr "Korte steekafstand" msgid "Inset stitches if the distance between stitches is smaller than this." msgstr "" -#: lib/elements/satin_column.py:220 lib/elements/stroke.py:148 -msgid "Zig-zag spacing (peak-to-peak)" -msgstr "Zig-zag afstand (piek-naar-piek)" - #: lib/elements/satin_column.py:221 msgid "Peak-to-peak distance between zig-zags. This is double the mm/stitch measurement used by most mechanical machines." msgstr "" @@ -1920,7 +1933,7 @@ msgstr "" msgid "Additional pull compensation which varies as a percentage of stitch width. Two values separated by a space may be used for an aysmmetric effect." msgstr "" -#: lib/elements/satin_column.py:248 lib/elements/stroke.py:161 +#: lib/elements/satin_column.py:248 lib/elements/stroke.py:162 msgid "Pull compensation" msgstr "Trek compensatie" @@ -1933,27 +1946,27 @@ msgstr "" msgid "mm (each side)" msgstr "" -#: lib/elements/satin_column.py:263 lib/elements/stroke.py:273 +#: lib/elements/satin_column.py:263 lib/elements/stroke.py:274 msgid "Automatic" msgstr "" -#: lib/elements/satin_column.py:264 lib/elements/stroke.py:274 +#: lib/elements/satin_column.py:264 lib/elements/stroke.py:275 msgid "Don't reverse" msgstr "" -#: lib/elements/satin_column.py:265 lib/elements/stroke.py:275 +#: lib/elements/satin_column.py:265 lib/elements/stroke.py:276 msgid "Reverse first rail" msgstr "" -#: lib/elements/satin_column.py:266 lib/elements/stroke.py:276 +#: lib/elements/satin_column.py:266 lib/elements/stroke.py:277 msgid "Reverse second rail" msgstr "" -#: lib/elements/satin_column.py:267 lib/elements/stroke.py:277 +#: lib/elements/satin_column.py:267 lib/elements/stroke.py:278 msgid "Reverse both rails" msgstr "" -#: lib/elements/satin_column.py:273 lib/elements/stroke.py:283 +#: lib/elements/satin_column.py:273 lib/elements/stroke.py:284 msgid "Reverse rails" msgstr "" @@ -2054,196 +2067,192 @@ msgstr "" msgid "Split stitch if distance of maximum stitch length is exceeded" msgstr "Splitsen van steek als afstand van maximale steeklengte wordt overschreden" -#: lib/elements/stroke.py:36 +#: lib/elements/stroke.py:37 msgid "This element renders as running stitch while it has a satin column parameter." msgstr "" -#: lib/elements/stroke.py:38 +#: lib/elements/stroke.py:39 msgid "* Convert to stroke: select the element and open the parameter dialog. Enable running stitch along path." msgstr "" -#: lib/elements/stroke.py:39 +#: lib/elements/stroke.py:40 msgid "* Use as satin column: add an other rail and optionally rungs." msgstr "" -#: lib/elements/stroke.py:44 inx/inkstitch_select_elements.inx:12 +#: lib/elements/stroke.py:45 inx/inkstitch_select_elements.inx:12 msgid "Stroke" msgstr "Lijn" -#: lib/elements/stroke.py:47 +#: lib/elements/stroke.py:48 msgid "Running stitch along paths" msgstr "Lopende steek langs paden" -#: lib/elements/stroke.py:65 +#: lib/elements/stroke.py:66 msgid "Running Stitch / Bean Stitch" msgstr "" -#: lib/elements/stroke.py:66 +#: lib/elements/stroke.py:67 msgid "Ripple Stitch" msgstr "" -#: lib/elements/stroke.py:67 inx/inkstitch_select_elements.inx:21 +#: lib/elements/stroke.py:68 inx/inkstitch_select_elements.inx:21 msgid "ZigZag Stitch" msgstr "" -#: lib/elements/stroke.py:68 inx/inkstitch_select_elements.inx:22 +#: lib/elements/stroke.py:69 inx/inkstitch_select_elements.inx:22 msgid "Manual Stitch" msgstr "" -#: lib/elements/stroke.py:109 +#: lib/elements/stroke.py:110 msgid "Length of stitches. Stitches can be shorter according to the stitch tolerance setting." msgstr "" -#: lib/elements/stroke.py:120 +#: lib/elements/stroke.py:121 msgid "Stitch tolerance" msgstr "" -#: lib/elements/stroke.py:121 +#: lib/elements/stroke.py:122 msgid "All stitches must be within this distance from the path. A lower tolerance means stitches will be closer together. A higher tolerance means sharp corners may be rounded." msgstr "Alle steken moeten binnen deze afstand van het pad liggen. Een lagere tolerantie betekent dat de steken dichter bij elkaar komen te liggen. Een hogere tolerantie betekent dat scherpe hoeken mogen worden afgerond." -#: lib/elements/stroke.py:135 +#: lib/elements/stroke.py:136 msgid "Split stitches longer than this." msgstr "" -#: lib/elements/stroke.py:149 -msgid "Length of stitches in zig-zag mode." -msgstr "Lengte van steken in zig-zag modus." - -#: lib/elements/stroke.py:162 +#: lib/elements/stroke.py:163 msgid "Zigzag stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This widens the zigzag line width." msgstr "" -#: lib/elements/stroke.py:175 +#: lib/elements/stroke.py:176 msgid "Number of lines" msgstr "Aantal regels" -#: lib/elements/stroke.py:176 +#: lib/elements/stroke.py:177 msgid "Number of lines from start to finish" msgstr "Aantal regels van begin tot eind" -#: lib/elements/stroke.py:187 +#: lib/elements/stroke.py:188 msgid "Minimum line distance" msgstr "" -#: lib/elements/stroke.py:188 +#: lib/elements/stroke.py:189 msgid "Overrides the number of lines setting." msgstr "" -#: lib/elements/stroke.py:202 +#: lib/elements/stroke.py:203 msgid "Stagger lines this many times before repeating" msgstr "" -#: lib/elements/stroke.py:203 +#: lib/elements/stroke.py:204 msgid "Length of the cycle by which successive stitch lines are staggered. Fractional values are allowed and can have less visible diagonals than integer values. For linear ripples only." msgstr "" -#: lib/elements/stroke.py:215 +#: lib/elements/stroke.py:216 msgid "Skip first lines" msgstr "Eerste regels overslaan" -#: lib/elements/stroke.py:216 +#: lib/elements/stroke.py:217 msgid "Skip this number of lines at the beginning." msgstr "Sla dit aantal regels aan het begin over." -#: lib/elements/stroke.py:227 +#: lib/elements/stroke.py:228 msgid "Skip last lines" msgstr "Laatste regels overslaan" -#: lib/elements/stroke.py:228 +#: lib/elements/stroke.py:229 msgid "Skip this number of lines at the end" msgstr "Sla dit aantal regels aan het eind over" -#: lib/elements/stroke.py:239 +#: lib/elements/stroke.py:240 msgid "Line distance exponent" msgstr "Regelafstand exponent" -#: lib/elements/stroke.py:240 +#: lib/elements/stroke.py:241 msgid "Increase density towards one side." msgstr "Verhoog de dichtheid naar één kant." -#: lib/elements/stroke.py:251 +#: lib/elements/stroke.py:252 msgid "Flip exponent" msgstr "Spiegelen exponent" -#: lib/elements/stroke.py:252 +#: lib/elements/stroke.py:253 msgid "Reverse exponent effect." msgstr "Omgekeerd exponent effect." -#: lib/elements/stroke.py:263 +#: lib/elements/stroke.py:264 msgid "Reverse" msgstr "Omgekeerd" -#: lib/elements/stroke.py:264 +#: lib/elements/stroke.py:265 msgid "Flip start and end point" msgstr "Begin- en eindpunt spiegelen" -#: lib/elements/stroke.py:284 +#: lib/elements/stroke.py:285 msgid "Reverse satin ripple rails. Default: automatically detect and fix a reversed rail." msgstr "" -#: lib/elements/stroke.py:296 +#: lib/elements/stroke.py:297 msgid "Grid size" msgstr "Rastergrootte" -#: lib/elements/stroke.py:297 +#: lib/elements/stroke.py:298 msgid "Render as grid. Use with care and watch your stitch density." msgstr "Weergeven als raster. Wees voorzichtig en let op de steekdichtheid." -#: lib/elements/stroke.py:309 +#: lib/elements/stroke.py:310 msgid "Scale axis" msgstr "Schaal as" -#: lib/elements/stroke.py:310 +#: lib/elements/stroke.py:311 msgid "Scale axis for satin guided ripple stitches." msgstr "Schaal as voor satijngeleide ribbelsteken." -#: lib/elements/stroke.py:314 print/templates/ui.html:181 +#: lib/elements/stroke.py:315 print/templates/ui.html:181 #: inx/inkstitch_remove_embroidery_settings.inx:11 msgid "None" msgstr "Geen" -#: lib/elements/stroke.py:322 +#: lib/elements/stroke.py:323 msgid "Starting scale" msgstr "Beginschaal" -#: lib/elements/stroke.py:323 +#: lib/elements/stroke.py:324 msgid "How big the first copy of the line should be, in percent." msgstr "Hoe groot het eerste exemplaar van de regel moet zijn, in procenten." -#: lib/elements/stroke.py:323 lib/elements/stroke.py:335 +#: lib/elements/stroke.py:324 lib/elements/stroke.py:336 msgid "Used only for ripple stitch with a guide line." msgstr "Alleen gebruikt voor ribbelsteek met een hulplijn." -#: lib/elements/stroke.py:334 +#: lib/elements/stroke.py:335 msgid "Ending scale" msgstr "Eindschaal" -#: lib/elements/stroke.py:335 +#: lib/elements/stroke.py:336 msgid "How big the last copy of the line should be, in percent." msgstr "Hoe groot het laatste exemplaar van de regel moet zijn, in procenten." -#: lib/elements/stroke.py:346 +#: lib/elements/stroke.py:347 msgid "Rotate" msgstr "Draaien" -#: lib/elements/stroke.py:347 +#: lib/elements/stroke.py:348 msgid "Rotate satin guided ripple stitches" msgstr "Roteer satijnhulp ribbelsteken" -#: lib/elements/stroke.py:358 +#: lib/elements/stroke.py:359 msgid "Join style" msgstr "Knooppunt stijl" -#: lib/elements/stroke.py:359 +#: lib/elements/stroke.py:360 msgid "Join style for non circular ripples." msgstr "Knooppunt stijl voor niet circulaire golven." -#: lib/elements/stroke.py:362 +#: lib/elements/stroke.py:363 msgid "flat" msgstr "plat" -#: lib/elements/stroke.py:362 +#: lib/elements/stroke.py:363 msgid "point" msgstr "punt" @@ -2495,7 +2504,7 @@ msgstr "" msgid "Filter stitches smaller than (mm)" msgstr "" -#: lib/extensions/fill_to_stroke.py:33 lib/extensions/fill_to_stroke.py:42 +#: lib/extensions/fill_to_stroke.py:33 lib/extensions/fill_to_stroke.py:39 msgid "Please select one or more fill objects to render the centerline." msgstr "" @@ -2689,6 +2698,10 @@ msgstr "Borduur Parameters" msgid "Please select at least two elements to reorder." msgstr "Selecteer ten minste twee elementen om te hergroeperen." +#: lib/extensions/select_elements.py:76 +msgid "Could not detect python path. Please insert python path manually as described in the help tab of the select elements dialog." +msgstr "" + #: lib/extensions/selection_to_guide_line.py:21 msgid "Please select at least one object to be marked as a guide line." msgstr "Kies ten minste één voorwerp dat als hulplijn moet dienen." -- cgit v1.3.1