From 8a654ec9f6b8c54edc65a5ed6713f8dbd142a2e0 Mon Sep 17 00:00:00 2001 From: Ink/Stitch Crowdin integration Date: Tue, 12 Mar 2024 01:04:48 +0000 Subject: new translations from Crowdin --- translations/messages_nl_NL.po | 240 ++++++++++++++++++++++++----------------- 1 file changed, 139 insertions(+), 101 deletions(-) (limited to 'translations/messages_nl_NL.po') diff --git a/translations/messages_nl_NL.po b/translations/messages_nl_NL.po index 1aac5e8c..9e974d2f 100644 --- a/translations/messages_nl_NL.po +++ b/translations/messages_nl_NL.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2024-03-09 01:01+0000\n" -"PO-Revision-Date: 2024-03-09 01:02\n" +"POT-Creation-Date: 2024-03-12 01:03+0000\n" +"PO-Revision-Date: 2024-03-12 01:04\n" "Last-Translator: \n" "Language-Team: Dutch\n" "MIME-Version: 1.0\n" @@ -16,7 +16,7 @@ msgstr "" "Project-Id-Version: \n" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-09 01:01+0000\n" +"POT-Creation-Date: 2024-03-12 01:03+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: \n" "Language-Team: LANGUAGE \n" @@ -1289,7 +1289,7 @@ msgstr "Kleine Opvulling" msgid "This fill object is so small that it would probably look better as running stitch or satin column. For very small shapes, fill stitch is not possible, and Ink/Stitch will use running stitch around the outline instead." msgstr "Dit invulobject is zo klein dat het er waarschijnlijk beter uitziet als doorlopende steek of satijnbaan. Voor hele kleine vormen is invulsteek niet mogelijk, Ink/Stitch zal inplaats daarvan een doorlopende steek langs de rand maken." -#: lib/elements/fill_stitch.py:41 lib/elements/fill_stitch.py:222 +#: lib/elements/fill_stitch.py:41 lib/elements/fill_stitch.py:231 msgid "Expand" msgstr "Uitbreiden" @@ -1297,7 +1297,7 @@ msgstr "Uitbreiden" msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead." msgstr "De parameter Uitbreiden voor dit opvulobject kan niet worden toegepast. Ink/Stitch zal deze negeren en in plaats daarvan de oorspronkelijke grootte gebruiken." -#: lib/elements/fill_stitch.py:47 lib/elements/fill_stitch.py:517 +#: lib/elements/fill_stitch.py:47 lib/elements/fill_stitch.py:526 msgid "Inset" msgstr "Inzet" @@ -1354,7 +1354,7 @@ msgid "Fill: This object is made up of unconnected shapes. Ink/Stitch doesn't kn msgstr "Opvulling: Dit object bestaat uit vormen die geen verband met elkaar houden. Ink/Stitch weet niet in welke volgorde ze moeten worden genaaid. Breek dit object alstublieft op in afzonderlijke vormen." #: lib/elements/fill_stitch.py:84 lib/elements/fill_stitch.py:93 -#: lib/elements/fill_stitch.py:101 +#: lib/elements/fill_stitch.py:110 msgid "* Extensions > Ink/Stitch > Fill Tools > Break Apart Fill Objects" msgstr "* Uitbreidingen > Ink/Stitch > Opvul gereedschap > Opdelen Opvulobjecten" @@ -1367,314 +1367,330 @@ msgid "Fill: The border crosses over itself. This may lead into unconnected shap msgstr "Opvulling: De rand kruist zichzelf. Dit kan leiden tot niet aaneengesloten vormen. Breek dit object in aparte vormen om aan te geven in welke volgorde het gestikt moet worden." #: lib/elements/fill_stitch.py:98 +msgid "Fill and Stroke color" +msgstr "" + +#: lib/elements/fill_stitch.py:99 +msgid "Element has both a fill and a stroke color. It is recommended to use two separate elements instead." +msgstr "" + +#: lib/elements/fill_stitch.py:101 +msgid "* Duplicate the element. Remove stroke color from the first and fill color from the second." +msgstr "" + +#: lib/elements/fill_stitch.py:102 +msgid "* Adapt the shape of the second element to compensate for push and pull fabric distortion." +msgstr "" + +#: lib/elements/fill_stitch.py:107 msgid "This shape is invalid" msgstr "Deze vorm is ongeldig" -#: lib/elements/fill_stitch.py:99 +#: lib/elements/fill_stitch.py:108 msgid "Fill: This shape cannot be stitched out. Please try to repair it with the \"Break Apart Fill Objects\" extension." msgstr "Opvulling: Deze vorm kan niet worden gestikt. Probeer het te repareren met de \"Break Apart Fill Objects\" extensie." -#: lib/elements/fill_stitch.py:106 +#: lib/elements/fill_stitch.py:115 msgid "FillStitch" msgstr "Vulsteek" -#: lib/elements/fill_stitch.py:109 +#: lib/elements/fill_stitch.py:118 msgid "Automatically routed fill stitching" msgstr "Automatisch gerouteerde opvulsteken" -#: lib/elements/fill_stitch.py:113 +#: lib/elements/fill_stitch.py:122 msgid "Auto Fill" msgstr "Automatische vulling" -#: lib/elements/fill_stitch.py:114 inx/inkstitch_select_elements.inx:56 +#: lib/elements/fill_stitch.py:123 inx/inkstitch_select_elements.inx:56 msgid "Contour Fill" msgstr "Contourvulling" -#: lib/elements/fill_stitch.py:115 inx/inkstitch_select_elements.inx:57 +#: lib/elements/fill_stitch.py:124 inx/inkstitch_select_elements.inx:57 msgid "Guided Fill" msgstr "Begeleide vulling" -#: lib/elements/fill_stitch.py:116 inx/inkstitch_select_elements.inx:59 +#: lib/elements/fill_stitch.py:125 inx/inkstitch_select_elements.inx:59 msgid "Meander Fill" msgstr "" -#: lib/elements/fill_stitch.py:117 inx/inkstitch_select_elements.inx:55 +#: lib/elements/fill_stitch.py:126 inx/inkstitch_select_elements.inx:55 msgid "Circular Fill" msgstr "" -#: lib/elements/fill_stitch.py:118 inx/inkstitch_select_elements.inx:58 +#: lib/elements/fill_stitch.py:127 inx/inkstitch_select_elements.inx:58 msgid "Linear Gradient Fill" msgstr "" -#: lib/elements/fill_stitch.py:119 inx/inkstitch_select_elements.inx:60 +#: lib/elements/fill_stitch.py:128 inx/inkstitch_select_elements.inx:60 msgid "Legacy Fill" msgstr "Legacy vulling" -#: lib/elements/fill_stitch.py:123 +#: lib/elements/fill_stitch.py:132 msgid "Fill method" msgstr "Vulmethode" -#: lib/elements/fill_stitch.py:132 +#: lib/elements/fill_stitch.py:141 msgid "Guided Fill Strategy" msgstr "Begeleide vulstrategie" -#: lib/elements/fill_stitch.py:133 +#: lib/elements/fill_stitch.py:142 msgid "Copy" msgstr "Kopiëren" -#: lib/elements/fill_stitch.py:133 +#: lib/elements/fill_stitch.py:142 msgid "Parallel Offset" msgstr "Parallelle verschuiving" -#: lib/elements/fill_stitch.py:134 +#: lib/elements/fill_stitch.py:143 msgid "Copy (the default) will fill the shape with shifted copies of the line. Parallel offset will ensure that each line is always a consistent distance from its neighbor. Sharp corners may be introduced." msgstr "" -#: lib/elements/fill_stitch.py:141 +#: lib/elements/fill_stitch.py:150 msgid "Contour Fill Strategy" msgstr "Contour vulstrategie" -#: lib/elements/fill_stitch.py:142 +#: lib/elements/fill_stitch.py:151 msgid "Inner to Outer" msgstr "Binnen naar buiten" -#: lib/elements/fill_stitch.py:142 +#: lib/elements/fill_stitch.py:151 msgid "Single spiral" msgstr "Enkele spiraal" -#: lib/elements/fill_stitch.py:142 +#: lib/elements/fill_stitch.py:151 msgid "Double spiral" msgstr "Dubbele spiraal" -#: lib/elements/fill_stitch.py:147 +#: lib/elements/fill_stitch.py:156 msgid "Join Style" msgstr "Combineer stijl" -#: lib/elements/fill_stitch.py:148 +#: lib/elements/fill_stitch.py:157 msgid "Round" msgstr "Rond" -#: lib/elements/fill_stitch.py:148 +#: lib/elements/fill_stitch.py:157 msgid "Mitered" msgstr "Verstek" -#: lib/elements/fill_stitch.py:148 +#: lib/elements/fill_stitch.py:157 msgid "Beveled" msgstr "Afgeschuind" -#: lib/elements/fill_stitch.py:154 +#: lib/elements/fill_stitch.py:163 msgid "Avoid self-crossing" msgstr "Vermijd zelfkruising" -#: lib/elements/fill_stitch.py:163 +#: lib/elements/fill_stitch.py:172 msgid "Clockwise" msgstr "Met de klok mee" -#: lib/elements/fill_stitch.py:168 +#: lib/elements/fill_stitch.py:177 msgid "Meander Pattern" msgstr "" -#: lib/elements/fill_stitch.py:175 +#: lib/elements/fill_stitch.py:184 msgid "Meander pattern angle" msgstr "" -#: lib/elements/fill_stitch.py:185 +#: lib/elements/fill_stitch.py:194 msgid "Meander pattern scale" msgstr "" -#: lib/elements/fill_stitch.py:186 +#: lib/elements/fill_stitch.py:195 msgid "Percentage to stretch or compress the meander pattern. You can scale horizontally and vertically individually by giving two percentages separated by a space. " msgstr "" -#: lib/elements/fill_stitch.py:196 +#: lib/elements/fill_stitch.py:205 msgid "Clip path" msgstr "" -#: lib/elements/fill_stitch.py:197 +#: lib/elements/fill_stitch.py:206 msgid "Constrain stitching to the shape. Useful when smoothing and expand are used." msgstr "" -#: lib/elements/fill_stitch.py:206 +#: lib/elements/fill_stitch.py:215 msgid "Smoothness" msgstr "" -#: lib/elements/fill_stitch.py:207 +#: lib/elements/fill_stitch.py:216 msgid "Smooth the stitch path. Smoothness limits how far the smoothed stitch path is allowed to deviate from the original path. Try low numbers like 0.2. Hint: a lower running stitch tolerance may be needed too." msgstr "" -#: lib/elements/fill_stitch.py:223 +#: lib/elements/fill_stitch.py:232 msgid "Expand the shape before fill stitching, to compensate for gaps between shapes. Negative values contract instead." msgstr "" -#: lib/elements/fill_stitch.py:238 +#: lib/elements/fill_stitch.py:247 msgid "Angle of lines of stitches" msgstr "Hoek van de lijnen van de steken" -#: lib/elements/fill_stitch.py:239 +#: lib/elements/fill_stitch.py:248 msgid "The angle increases in a counter-clockwise direction. 0 is horizontal. Negative angles are allowed." msgstr "De hoek neemt toe tegen de klok in. 0 is horizontaal. Negatieve waarden zijn toegestaan." -#: lib/elements/fill_stitch.py:251 +#: lib/elements/fill_stitch.py:260 msgid "Maximum fill stitch length" msgstr "Maximale opvulsteeklengte" -#: lib/elements/fill_stitch.py:252 +#: lib/elements/fill_stitch.py:261 msgid "The length of each stitch in a row. Shorter stitch may be used at the start or end of a row." msgstr "De lengte van elke steek in een rij. Een kortere steek kan worden gebruikt aan het begin of einde van een rij." -#: lib/elements/fill_stitch.py:268 +#: lib/elements/fill_stitch.py:277 msgid "Spacing between rows" msgstr "Afstand tussen rijen" -#: lib/elements/fill_stitch.py:269 +#: lib/elements/fill_stitch.py:278 msgid "Distance between rows of stitches." msgstr "Afstand tussen rijen van steken." -#: lib/elements/fill_stitch.py:285 inx/inkstitch_gradient_blocks.inx:22 +#: lib/elements/fill_stitch.py:294 inx/inkstitch_gradient_blocks.inx:22 msgid "End row spacing" msgstr "" -#: lib/elements/fill_stitch.py:286 +#: lib/elements/fill_stitch.py:295 msgid "Increases or decreases the row spacing towards the end." msgstr "" -#: lib/elements/fill_stitch.py:300 +#: lib/elements/fill_stitch.py:309 msgid "Stagger rows this many times before repeating" msgstr "Spring rijen zoveel keer in voordat herhaald wordt" -#: lib/elements/fill_stitch.py:301 lib/elements/satin_column.py:193 +#: lib/elements/fill_stitch.py:310 lib/elements/satin_column.py:193 msgid "Length of the cycle by which successive stitch rows are staggered. Fractional values are allowed and can have less visible diagonals than integer values." msgstr "" -#: lib/elements/fill_stitch.py:316 lib/elements/fill_stitch.py:529 +#: lib/elements/fill_stitch.py:325 lib/elements/fill_stitch.py:538 msgid "Skip last stitch in each row" msgstr "Sla de laatste steek in elke rij over" -#: lib/elements/fill_stitch.py:317 lib/elements/fill_stitch.py:530 +#: lib/elements/fill_stitch.py:326 lib/elements/fill_stitch.py:539 msgid "The last stitch in each row is quite close to the first stitch in the next row. Skipping it decreases stitch count and density." msgstr "De laatste steek in elke rij is vrij dicht op de eerste steek in de volgende rij. Door deze over te slaan wordt de dichtheid en het aantal steken verkleind." -#: lib/elements/fill_stitch.py:332 +#: lib/elements/fill_stitch.py:341 msgid "Flip fill (start right-to-left)" msgstr "Draai opvulling om (start rechts-naar-links)" -#: lib/elements/fill_stitch.py:333 +#: lib/elements/fill_stitch.py:342 msgid "The flip option can help you with routing your stitch path. When you enable flip, stitching goes from right-to-left instead of left-to-right." msgstr "De omdraai optie kan je helpen met het routeren van je steekpad. Als je omdraaien kiest, gaat het borduren van rechts naar links in plaats van van links naar rechts." -#: lib/elements/fill_stitch.py:345 +#: lib/elements/fill_stitch.py:354 msgid "Stop at ending point" msgstr "" -#: lib/elements/fill_stitch.py:346 +#: lib/elements/fill_stitch.py:355 msgid "If this option is disabled, the ending point will only be used to define a general direction for stitch routing. When enabled the last section will end at the defined spot." msgstr "" -#: lib/elements/fill_stitch.py:358 lib/elements/fill_stitch.py:541 +#: lib/elements/fill_stitch.py:367 lib/elements/fill_stitch.py:550 msgid "Underpath" msgstr "Onderpad" -#: lib/elements/fill_stitch.py:359 lib/elements/fill_stitch.py:542 +#: lib/elements/fill_stitch.py:368 lib/elements/fill_stitch.py:551 msgid "Travel inside the shape when moving from section to section. Underpath stitches avoid traveling in the direction of the row angle so that they are not visible. This gives them a jagged appearance." msgstr "Beweeg binnen de vorm bij verplaatsen tussen secties. Onderpad steken vermijden de richting van de rijhoek zodat ze niet zichtbaar zijn. Dit geeft ze een gekarteld uiterlijk." -#: lib/elements/fill_stitch.py:371 lib/elements/stroke.py:109 +#: lib/elements/fill_stitch.py:380 lib/elements/stroke.py:109 msgid "Running stitch length" msgstr "Doorlopende steek lengte" -#: lib/elements/fill_stitch.py:372 +#: lib/elements/fill_stitch.py:381 msgid "Length of stitches around the outline of the fill region used when moving from section to section. Also used for meander and circular fill." msgstr "" -#: lib/elements/fill_stitch.py:388 +#: lib/elements/fill_stitch.py:397 msgid "Running stitch tolerance" msgstr "Tolerantie lopende steek" -#: lib/elements/fill_stitch.py:389 +#: lib/elements/fill_stitch.py:398 msgid "Determines how hard Ink/Stitch tries to avoid stitching outside the shape.Lower numbers are less likely to stitch outside the shape but require more stitches." msgstr "" -#: lib/elements/fill_stitch.py:400 lib/elements/satin_column.py:393 +#: lib/elements/fill_stitch.py:409 lib/elements/satin_column.py:393 #: lib/elements/stroke.py:83 msgid "Repeats" msgstr "Herhalingen" -#: lib/elements/fill_stitch.py:401 lib/elements/stroke.py:84 +#: lib/elements/fill_stitch.py:410 lib/elements/stroke.py:84 msgid "Defines how many times to run down and back along the path." msgstr "Bepaalt hoe vaak op en neer langs een pad wordt gegaan." -#: lib/elements/fill_stitch.py:412 lib/elements/stroke.py:95 +#: lib/elements/fill_stitch.py:421 lib/elements/stroke.py:95 msgid "Bean stitch number of repeats" msgstr "Bonensteek aantal herhalingen" -#: lib/elements/fill_stitch.py:413 lib/elements/stroke.py:96 +#: lib/elements/fill_stitch.py:422 lib/elements/stroke.py:96 msgid "Backtrack each stitch this many times. A value of 1 would triple each stitch (forward, back, forward). A value of 2 would quintuple each stitch, etc.\n\n" "A pattern with various repeats can be created with a list of values separated by a space." msgstr "" -#: lib/elements/fill_stitch.py:427 lib/elements/satin_column.py:228 +#: lib/elements/fill_stitch.py:436 lib/elements/satin_column.py:228 #: lib/elements/stroke.py:149 msgid "Zig-zag spacing (peak-to-peak)" msgstr "Zig-zag afstand (piek-naar-piek)" -#: lib/elements/fill_stitch.py:428 lib/elements/stroke.py:150 +#: lib/elements/fill_stitch.py:437 lib/elements/stroke.py:150 msgid "Length of stitches in zig-zag mode." msgstr "Lengte van steken in zig-zag modus." -#: lib/elements/fill_stitch.py:440 +#: lib/elements/fill_stitch.py:449 msgid "Zigzag width" msgstr "" -#: lib/elements/fill_stitch.py:441 +#: lib/elements/fill_stitch.py:450 msgid "Width of the zigzag line." msgstr "" -#: lib/elements/fill_stitch.py:463 inx/inkstitch_select_elements.inx:35 +#: lib/elements/fill_stitch.py:472 inx/inkstitch_select_elements.inx:35 #: inx/inkstitch_select_elements.inx:62 inx/inkstitch_select_elements.inx:64 msgid "Underlay" msgstr "Versteviging" -#: lib/elements/fill_stitch.py:463 lib/elements/fill_stitch.py:472 -#: lib/elements/fill_stitch.py:499 lib/elements/fill_stitch.py:510 -#: lib/elements/fill_stitch.py:520 lib/elements/fill_stitch.py:532 -#: lib/elements/fill_stitch.py:545 +#: lib/elements/fill_stitch.py:472 lib/elements/fill_stitch.py:481 +#: lib/elements/fill_stitch.py:508 lib/elements/fill_stitch.py:519 +#: lib/elements/fill_stitch.py:529 lib/elements/fill_stitch.py:541 +#: lib/elements/fill_stitch.py:554 msgid "Fill Underlay" msgstr "Vulling onderlaag" -#: lib/elements/fill_stitch.py:469 +#: lib/elements/fill_stitch.py:478 msgid "Fill angle" msgstr "Opvul hoek" -#: lib/elements/fill_stitch.py:470 +#: lib/elements/fill_stitch.py:479 msgid "Default: fill angle + 90 deg. Insert a list for multiple layers separated by a space." msgstr "" -#: lib/elements/fill_stitch.py:496 +#: lib/elements/fill_stitch.py:505 msgid "Row spacing" msgstr "Opvulrij afstand" -#: lib/elements/fill_stitch.py:497 +#: lib/elements/fill_stitch.py:506 msgid "default: 3x fill row spacing" msgstr "standaard: 3x opvulrij afstand" -#: lib/elements/fill_stitch.py:507 lib/elements/stroke.py:135 +#: lib/elements/fill_stitch.py:516 lib/elements/stroke.py:135 #: lib/extensions/element_info.py:125 lib/extensions/element_info.py:181 msgid "Max stitch length" msgstr "Max steek lengte" -#: lib/elements/fill_stitch.py:508 +#: lib/elements/fill_stitch.py:517 msgid "default: equal to fill max stitch length" msgstr "standaard: gelijk aan max steek lengte" -#: lib/elements/fill_stitch.py:518 +#: lib/elements/fill_stitch.py:527 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill." msgstr "Verklein de vorm van de versteviging om te voorkomen dat de versteviging zichtbaar is aan de buitenkant van de opvulling." -#: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:474 +#: lib/elements/fill_stitch.py:562 lib/elements/satin_column.py:474 msgid "Random seed" msgstr "" -#: lib/elements/fill_stitch.py:554 lib/elements/satin_column.py:475 +#: lib/elements/fill_stitch.py:563 lib/elements/satin_column.py:475 msgid "Use a specific seed for randomized attributes. Uses the element ID if empty." msgstr "" @@ -2622,7 +2638,7 @@ msgstr "" msgid "Please specify the directory of your custom fonts." msgstr "Geef de map van uw aangepaste lettertypes op." -#: lib/extensions/lettering_force_lock_stitches.py:29 +#: lib/extensions/lettering_force_lock_stitches.py:30 msgid "The maximum value is smaller than the minimum value." msgstr "De maximumwaarde is kleiner dan de minimumwaarde." @@ -2877,8 +2893,8 @@ msgid "Value" msgstr "" #: lib/gui/element_info.py:41 lib/gui/test_swatches.py:83 -#: inx/inkstitch_apply_threadlist.inx:89 inx/inkstitch_auto_run.inx:23 -#: inx/inkstitch_cutwork_segmentation.inx:42 +#: inx/inkstitch_apply_palette.inx:84 inx/inkstitch_apply_threadlist.inx:89 +#: inx/inkstitch_auto_run.inx:23 inx/inkstitch_cutwork_segmentation.inx:42 #: inx/inkstitch_fill_to_stroke.inx:23 inx/inkstitch_generate_palette.inx:24 #: inx/inkstitch_gradient_blocks.inx:24 inx/inkstitch_jump_to_stroke.inx:40 #: inx/inkstitch_lettering_along_path.inx:17 @@ -2925,8 +2941,9 @@ msgid "Font Filter" msgstr "" #: lib/gui/lettering.py:78 lib/gui/test_swatches.py:33 -#: inx/inkstitch_apply_threadlist.inx:7 inx/inkstitch_fill_to_stroke.inx:15 -#: inx/inkstitch_gradient_blocks.inx:15 inx/inkstitch_jump_to_stroke.inx:15 +#: inx/inkstitch_apply_palette.inx:7 inx/inkstitch_apply_threadlist.inx:7 +#: inx/inkstitch_fill_to_stroke.inx:15 inx/inkstitch_gradient_blocks.inx:15 +#: inx/inkstitch_jump_to_stroke.inx:15 #: inx/inkstitch_lettering_along_path.inx:13 #: inx/inkstitch_palette_to_text.inx:15 inx/inkstitch_stroke_to_lpe_satin.inx:7 #: inx/inkstitch_zigzag_line_to_satin.inx:7 @@ -3226,9 +3243,9 @@ msgid "This extension generates test swatches from a selection.\n" "Sew them out with the same thread and fabric as the final designs." msgstr "" -#: lib/gui/test_swatches.py:100 inx/inkstitch_apply_threadlist.inx:100 -#: inx/inkstitch_fill_to_stroke.inx:32 inx/inkstitch_jump_to_stroke.inx:42 -#: inx/inkstitch_stroke_to_lpe_satin.inx:32 +#: lib/gui/test_swatches.py:100 inx/inkstitch_apply_palette.inx:87 +#: inx/inkstitch_apply_threadlist.inx:100 inx/inkstitch_fill_to_stroke.inx:32 +#: inx/inkstitch_jump_to_stroke.inx:42 inx/inkstitch_stroke_to_lpe_satin.inx:32 #: inx/inkstitch_zigzag_line_to_satin.inx:28 msgid "Get more information on our website" msgstr "Meer informatie vindt u op onze website" @@ -4230,6 +4247,29 @@ msgstr "https://inkstitch.org" msgid "License" msgstr "Licentie" +#: inx/inkstitch_apply_palette.inx:3 +msgid "Apply Palette" +msgstr "" + +#: inx/inkstitch_apply_palette.inx:8 +msgid "Select color palette" +msgstr "" + +#: inx/inkstitch_apply_palette.inx:85 +msgid "This extension applies nearest colors from chosen color palette to the elements in this document." +msgstr "" + +#: inx/inkstitch_apply_palette.inx:88 +msgid "https://inkstitch.org/docs/thread-color/#apply-palette" +msgstr "" + +#: inx/inkstitch_apply_palette.inx:95 inx/inkstitch_apply_threadlist.inx:108 +#: inx/inkstitch_generate_palette.inx:10 inx/inkstitch_install.inx:10 +#: inx/inkstitch_install_custom_palette.inx:13 +#: inx/inkstitch_palette_split_text.inx:10 inx/inkstitch_palette_to_text.inx:9 +msgid "Thread Color Management" +msgstr "Garen kleurbeheer" + #: inx/inkstitch_apply_threadlist.inx:3 msgid "Apply Threadlist" msgstr "Garenlijst toepassen" @@ -4284,12 +4324,6 @@ msgstr "Importeer elk ander Threadlist-bestand in txt-formaat. Ink/Stitch zal pr msgid "https://inkstitch.org/docs/thread-color/#apply-threadlist" msgstr "https://inkstitch.org/docs/thread-color/#apply-threadlist" -#: inx/inkstitch_apply_threadlist.inx:108 inx/inkstitch_generate_palette.inx:10 -#: inx/inkstitch_install.inx:10 inx/inkstitch_install_custom_palette.inx:13 -#: inx/inkstitch_palette_split_text.inx:10 inx/inkstitch_palette_to_text.inx:9 -msgid "Thread Color Management" -msgstr "Garen kleurbeheer" - #: inx/inkstitch_auto_run.inx:3 inx/inkstitch_auto_run.inx:24 msgid "Auto-Route Running Stitch" msgstr "Auto-route lopende steek" @@ -5469,15 +5503,19 @@ msgstr "" msgid "This extension has been build to help font authors to define \"force lock stitches\"-attributes automatically if they are placed in a predefined distance to the next object." msgstr "" -#: inx/inkstitch_lettering_force_lock_stitches.inx:23 +#: inx/inkstitch_lettering_force_lock_stitches.inx:26 +msgid "Restrict to Satin" +msgstr "" + +#: inx/inkstitch_lettering_force_lock_stitches.inx:27 msgid "Minimum distance (mm)" msgstr "Minimumafstand (mm)" -#: inx/inkstitch_lettering_force_lock_stitches.inx:24 +#: inx/inkstitch_lettering_force_lock_stitches.inx:28 msgid "Maximum distance (mm)" msgstr "" -#: inx/inkstitch_lettering_force_lock_stitches.inx:26 +#: inx/inkstitch_lettering_force_lock_stitches.inx:30 msgid "Add force lock stitches attribute to the last element of each glyph" msgstr "Voeg geforceerde locksteken attribuut toe aan het laatste element van elke glyph" -- cgit v1.3.1