From cb87279cff6fafcd450e7b4f24b0b1a904ac07af Mon Sep 17 00:00:00 2001 From: Ink/Stitch Crowdin integration Date: Thu, 22 Feb 2024 01:04:17 +0000 Subject: new translations from Crowdin --- translations/messages_nl_NL.po | 330 ++++++++++++++--------------------------- 1 file changed, 115 insertions(+), 215 deletions(-) (limited to 'translations/messages_nl_NL.po') diff --git a/translations/messages_nl_NL.po b/translations/messages_nl_NL.po index 7a31fe21..f4e14344 100644 --- a/translations/messages_nl_NL.po +++ b/translations/messages_nl_NL.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2024-02-11 01:08+0000\n" -"PO-Revision-Date: 2024-02-11 01:09\n" +"POT-Creation-Date: 2024-02-22 01:03+0000\n" +"PO-Revision-Date: 2024-02-22 01:04\n" "Last-Translator: \n" "Language-Team: Dutch\n" "MIME-Version: 1.0\n" @@ -16,7 +16,7 @@ msgstr "" "Project-Id-Version: \n" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-02-11 01:08+0000\n" +"POT-Creation-Date: 2024-02-22 01:03+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: \n" "Language-Team: LANGUAGE \n" @@ -1137,8 +1137,7 @@ msgstr "Zet de kloon om in een echt element:" msgid "* Select the clone." msgstr "* Selecteer de kloon." -#: lib/elements/clone.py:53 inx/inkstitch_select_elements.inx:63 -#: inx/inkstitch_select_elements.inx:64 +#: lib/elements/clone.py:53 msgid "Clone" msgstr "Kloon" @@ -1386,19 +1385,19 @@ msgstr "Automatisch gerouteerde opvulsteken" msgid "Auto Fill" msgstr "Automatische vulling" -#: lib/elements/fill_stitch.py:114 inx/inkstitch_select_elements.inx:47 +#: lib/elements/fill_stitch.py:114 msgid "Contour Fill" msgstr "Contourvulling" -#: lib/elements/fill_stitch.py:115 inx/inkstitch_select_elements.inx:48 +#: lib/elements/fill_stitch.py:115 msgid "Guided Fill" msgstr "Begeleide vulling" -#: lib/elements/fill_stitch.py:116 inx/inkstitch_select_elements.inx:49 +#: lib/elements/fill_stitch.py:116 msgid "Meander Fill" msgstr "" -#: lib/elements/fill_stitch.py:117 inx/inkstitch_select_elements.inx:50 +#: lib/elements/fill_stitch.py:117 msgid "Circular Fill" msgstr "" @@ -1406,7 +1405,7 @@ msgstr "" msgid "Linear Gradient Fill" msgstr "" -#: lib/elements/fill_stitch.py:119 inx/inkstitch_select_elements.inx:51 +#: lib/elements/fill_stitch.py:119 msgid "Legacy Fill" msgstr "Legacy vulling" @@ -1542,7 +1541,7 @@ msgstr "" msgid "Stagger rows this many times before repeating" msgstr "Spring rijen zoveel keer in voordat herhaald wordt" -#: lib/elements/fill_stitch.py:301 lib/elements/satin_column.py:185 +#: lib/elements/fill_stitch.py:301 lib/elements/satin_column.py:193 msgid "Length of the cycle by which successive stitch rows are staggered. Fractional values are allowed and can have less visible diagonals than integer values." msgstr "" @@ -1594,7 +1593,7 @@ msgstr "Tolerantie lopende steek" msgid "Determines how hard Ink/Stitch tries to avoid stitching outside the shape.Lower numbers are less likely to stitch outside the shape but require more stitches." msgstr "" -#: lib/elements/fill_stitch.py:400 lib/elements/satin_column.py:385 +#: lib/elements/fill_stitch.py:400 lib/elements/satin_column.py:393 #: lib/elements/stroke.py:83 msgid "Repeats" msgstr "Herhalingen" @@ -1612,7 +1611,7 @@ msgid "Backtrack each stitch this many times. A value of 1 would triple each st "A pattern with various repeats can be created with a list of values separated by a space." msgstr "" -#: lib/elements/fill_stitch.py:427 lib/elements/satin_column.py:220 +#: lib/elements/fill_stitch.py:427 lib/elements/satin_column.py:228 #: lib/elements/stroke.py:149 msgid "Zig-zag spacing (peak-to-peak)" msgstr "Zig-zag afstand (piek-naar-piek)" @@ -1629,8 +1628,7 @@ msgstr "" msgid "Width of the zigzag line." msgstr "" -#: lib/elements/fill_stitch.py:463 inx/inkstitch_select_elements.inx:33 -#: inx/inkstitch_select_elements.inx:53 inx/inkstitch_select_elements.inx:55 +#: lib/elements/fill_stitch.py:463 msgid "Underlay" msgstr "Versteviging" @@ -1670,11 +1668,11 @@ msgstr "standaard: gelijk aan max steek lengte" msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill." msgstr "Verklein de vorm van de versteviging om te voorkomen dat de versteviging zichtbaar is aan de buitenkant van de opvulling." -#: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:466 +#: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:474 msgid "Random seed" msgstr "" -#: lib/elements/fill_stitch.py:554 lib/elements/satin_column.py:467 +#: lib/elements/fill_stitch.py:554 lib/elements/satin_column.py:475 msgid "Use a specific seed for randomized attributes. Uses the element ID if empty." msgstr "" @@ -1795,297 +1793,308 @@ msgid "Satin column: A rung doesn't intersect both rails." msgstr "Satijnbaan: een sport doorkruist niet beide rails." #: lib/elements/satin_column.py:62 +msgid "Satin has exactly two rungs" +msgstr "" + +#: lib/elements/satin_column.py:63 +msgid "Satin column: There are exactly two rungs. This may lead to false rail/rung detection." +msgstr "" + +#: lib/elements/satin_column.py:65 +msgid "Add an other rung." +msgstr "" + +#: lib/elements/satin_column.py:70 msgid "Unequal number of points" msgstr "Ongelijk aantal punten" -#: lib/elements/satin_column.py:63 +#: lib/elements/satin_column.py:71 msgid "Satin column: There are no rungs and rails have an unequal number of points." msgstr "" -#: lib/elements/satin_column.py:65 +#: lib/elements/satin_column.py:73 msgid "The easiest way to solve this issue is to add one or more rungs. " msgstr "The makkelijkste oplossing is om een of meer sporten toe te voegen. " -#: lib/elements/satin_column.py:66 +#: lib/elements/satin_column.py:74 msgid "Rungs control the stitch direction in satin columns." msgstr "Sporten bepalen de steekrichting voor Satijnbanen." -#: lib/elements/satin_column.py:67 +#: lib/elements/satin_column.py:75 msgid "* With the selected object press \"P\" to activate the pencil tool." msgstr "* Met het geselecteerde object kies \"P\" om het potlood gereedschap te activeren." -#: lib/elements/satin_column.py:68 +#: lib/elements/satin_column.py:76 msgid "* Hold \"Shift\" while drawing the rung." msgstr "* Houdt \"Shift\" ingedrukt tijdens het tekenen van de sport." -#: lib/elements/satin_column.py:73 lib/elements/satin_column.py:83 -#: inx/inkstitch_select_elements.inx:30 +#: lib/elements/satin_column.py:81 lib/elements/satin_column.py:91 msgid "Satin Column" msgstr "Satijnbaan" -#: lib/elements/satin_column.py:79 +#: lib/elements/satin_column.py:87 msgid "Custom satin column" msgstr "Aangepaste satijnbaan" -#: lib/elements/satin_column.py:84 +#: lib/elements/satin_column.py:92 msgid "\"E\" Stitch" msgstr "" -#: lib/elements/satin_column.py:85 +#: lib/elements/satin_column.py:93 msgid "\"S\" Stitch" msgstr "" -#: lib/elements/satin_column.py:86 lib/stitch_plan/lock_stitch.py:211 +#: lib/elements/satin_column.py:94 lib/stitch_plan/lock_stitch.py:211 msgid "Zig-zag" msgstr "" -#: lib/elements/satin_column.py:90 lib/elements/stroke.py:73 +#: lib/elements/satin_column.py:98 lib/elements/stroke.py:73 #: inx/inkstitch_break_apart.inx:17 msgid "Method" msgstr "Methode" -#: lib/elements/satin_column.py:100 +#: lib/elements/satin_column.py:108 msgid "Random percentage of satin width decrease" msgstr "" -#: lib/elements/satin_column.py:101 +#: lib/elements/satin_column.py:109 msgid "shorten stitch across rails at most this percent. Two values separated by a space may be used for an aysmmetric effect." msgstr "" -#: lib/elements/satin_column.py:103 lib/elements/satin_column.py:113 -#: lib/elements/satin_column.py:236 lib/elements/satin_column.py:364 -#: lib/elements/satin_column.py:444 +#: lib/elements/satin_column.py:111 lib/elements/satin_column.py:121 +#: lib/elements/satin_column.py:244 lib/elements/satin_column.py:372 +#: lib/elements/satin_column.py:452 msgid "% (each side)" msgstr "" -#: lib/elements/satin_column.py:110 +#: lib/elements/satin_column.py:118 msgid "Random percentage of satin width increase" msgstr "" -#: lib/elements/satin_column.py:111 +#: lib/elements/satin_column.py:119 msgid "lengthen stitch across rails at most this percent. Two values separated by a space may be used for an aysmmetric effect." msgstr "" -#: lib/elements/satin_column.py:120 +#: lib/elements/satin_column.py:128 msgid "Random zig-zag spacing percentage" msgstr "" -#: lib/elements/satin_column.py:121 +#: lib/elements/satin_column.py:129 msgid "Amount of random jitter added to zigzag spacing." msgstr "" -#: lib/elements/satin_column.py:127 +#: lib/elements/satin_column.py:135 msgid "Default" msgstr "" -#: lib/elements/satin_column.py:128 lib/stitch_plan/lock_stitch.py:209 +#: lib/elements/satin_column.py:136 lib/stitch_plan/lock_stitch.py:209 #: inx/inkstitch_break_apart.inx:18 msgid "Simple" msgstr "Eenvoudig" -#: lib/elements/satin_column.py:129 +#: lib/elements/satin_column.py:137 msgid "Staggered" msgstr "" -#: lib/elements/satin_column.py:133 +#: lib/elements/satin_column.py:141 msgid "Split Method" msgstr "" -#: lib/elements/satin_column.py:143 lib/elements/satin_column.py:455 +#: lib/elements/satin_column.py:151 lib/elements/satin_column.py:463 msgid "Maximum stitch length" msgstr "Maximale steeklengte" -#: lib/elements/satin_column.py:144 +#: lib/elements/satin_column.py:152 msgid "Maximum stitch length for split stitches." msgstr "Maximale steeklengte voor gesplitste steken." -#: lib/elements/satin_column.py:153 +#: lib/elements/satin_column.py:161 msgid "Random jitter for split stitches" msgstr "" -#: lib/elements/satin_column.py:154 +#: lib/elements/satin_column.py:162 msgid "Randomizes split stitch length if random phase is enabled, stitch position if disabled." msgstr "" -#: lib/elements/satin_column.py:162 +#: lib/elements/satin_column.py:170 msgid "Random phase for split stitches" msgstr "" -#: lib/elements/satin_column.py:163 +#: lib/elements/satin_column.py:171 msgid "Controls whether split stitches are centered or with a random phase (which may increase stitch count)." msgstr "" -#: lib/elements/satin_column.py:171 +#: lib/elements/satin_column.py:179 msgid "Minimum length for random-phase split" msgstr "" -#: lib/elements/satin_column.py:172 +#: lib/elements/satin_column.py:180 msgid "Defaults to maximum stitch length. Smaller values allow for a transition between single-stitch and split-stitch." msgstr "" -#: lib/elements/satin_column.py:182 +#: lib/elements/satin_column.py:190 msgid "Stagger split stitches this many times before repeating" msgstr "" -#: lib/elements/satin_column.py:194 +#: lib/elements/satin_column.py:202 msgid "Short stitch inset" msgstr "Korte steek inzet" -#: lib/elements/satin_column.py:195 +#: lib/elements/satin_column.py:203 msgid "Stitches in areas with high density will be inset by this amount." msgstr "" -#: lib/elements/satin_column.py:205 +#: lib/elements/satin_column.py:213 msgid "Short stitch distance" msgstr "Korte steekafstand" -#: lib/elements/satin_column.py:206 +#: lib/elements/satin_column.py:214 msgid "Inset stitches if the distance between stitches is smaller than this." msgstr "" -#: lib/elements/satin_column.py:221 +#: lib/elements/satin_column.py:229 msgid "Peak-to-peak distance between zig-zags. This is double the mm/stitch measurement used by most mechanical machines." msgstr "" -#: lib/elements/satin_column.py:233 +#: lib/elements/satin_column.py:241 msgid "Pull compensation percentage" msgstr "" -#: lib/elements/satin_column.py:234 +#: lib/elements/satin_column.py:242 msgid "Additional pull compensation which varies as a percentage of stitch width. Two values separated by a space may be used for an aysmmetric effect." msgstr "" -#: lib/elements/satin_column.py:248 lib/elements/stroke.py:162 +#: lib/elements/satin_column.py:256 lib/elements/stroke.py:162 msgid "Pull compensation" msgstr "Trek compensatie" -#: lib/elements/satin_column.py:249 +#: lib/elements/satin_column.py:257 msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This setting expands each pair of needle penetrations outward from the center of the satin column by a fixed length. Two values separated by a space may be used for an aysmmetric effect." msgstr "" -#: lib/elements/satin_column.py:252 lib/elements/satin_column.py:349 -#: lib/elements/satin_column.py:424 +#: lib/elements/satin_column.py:260 lib/elements/satin_column.py:357 +#: lib/elements/satin_column.py:432 msgid "mm (each side)" msgstr "" -#: lib/elements/satin_column.py:263 lib/elements/stroke.py:274 +#: lib/elements/satin_column.py:271 lib/elements/stroke.py:274 msgid "Automatic" msgstr "" -#: lib/elements/satin_column.py:264 lib/elements/stroke.py:275 +#: lib/elements/satin_column.py:272 lib/elements/stroke.py:275 msgid "Don't reverse" msgstr "" -#: lib/elements/satin_column.py:265 lib/elements/stroke.py:276 +#: lib/elements/satin_column.py:273 lib/elements/stroke.py:276 msgid "Reverse first rail" msgstr "" -#: lib/elements/satin_column.py:266 lib/elements/stroke.py:277 +#: lib/elements/satin_column.py:274 lib/elements/stroke.py:277 msgid "Reverse second rail" msgstr "" -#: lib/elements/satin_column.py:267 lib/elements/stroke.py:278 +#: lib/elements/satin_column.py:275 lib/elements/stroke.py:278 msgid "Reverse both rails" msgstr "" -#: lib/elements/satin_column.py:273 lib/elements/stroke.py:284 +#: lib/elements/satin_column.py:281 lib/elements/stroke.py:284 msgid "Reverse rails" msgstr "" -#: lib/elements/satin_column.py:274 +#: lib/elements/satin_column.py:282 msgid "This may help if your satin renders very strangely. Default: automatically detect and fix a reversed rail." msgstr "" -#: lib/elements/satin_column.py:323 +#: lib/elements/satin_column.py:331 msgid "Swap rails" msgstr "" -#: lib/elements/satin_column.py:324 +#: lib/elements/satin_column.py:332 msgid "Swaps the first and second rails of the satin column, affecting which side the thread finished on as well as any sided properties" msgstr "" -#: lib/elements/satin_column.py:333 +#: lib/elements/satin_column.py:341 msgid "Contour underlay" msgstr "Omtrek versteviging" -#: lib/elements/satin_column.py:333 lib/elements/satin_column.py:340 -#: lib/elements/satin_column.py:348 lib/elements/satin_column.py:363 +#: lib/elements/satin_column.py:341 lib/elements/satin_column.py:348 +#: lib/elements/satin_column.py:356 lib/elements/satin_column.py:371 msgid "Contour Underlay" msgstr "Omtrek Versteviging" -#: lib/elements/satin_column.py:340 lib/elements/satin_column.py:379 +#: lib/elements/satin_column.py:348 lib/elements/satin_column.py:387 msgid "Stitch length" msgstr "Steek lengte" -#: lib/elements/satin_column.py:346 +#: lib/elements/satin_column.py:354 msgid "Inset distance (fixed)" msgstr "" -#: lib/elements/satin_column.py:347 +#: lib/elements/satin_column.py:355 msgid "Shrink the outline by a fixed length, to prevent the underlay from showing around the outside of the satin column." msgstr "" -#: lib/elements/satin_column.py:360 +#: lib/elements/satin_column.py:368 msgid "Inset distance (proportional)" msgstr "" -#: lib/elements/satin_column.py:361 +#: lib/elements/satin_column.py:369 msgid "Shrink the outline by a proportion of the column width, to prevent the underlay from showing around the outside of the satin column." msgstr "" -#: lib/elements/satin_column.py:372 +#: lib/elements/satin_column.py:380 msgid "Center-walk underlay" msgstr "Middenlijn versteviging" -#: lib/elements/satin_column.py:372 lib/elements/satin_column.py:379 -#: lib/elements/satin_column.py:388 lib/elements/satin_column.py:398 +#: lib/elements/satin_column.py:380 lib/elements/satin_column.py:387 +#: lib/elements/satin_column.py:396 lib/elements/satin_column.py:406 msgid "Center-Walk Underlay" msgstr "Middenlijn Versteviging" -#: lib/elements/satin_column.py:386 +#: lib/elements/satin_column.py:394 msgid "For an odd number of repeats, this will reverse the direction the satin column is stitched, causing stitching to both begin and end at the start point." msgstr "" -#: lib/elements/satin_column.py:396 +#: lib/elements/satin_column.py:404 msgid "Position" msgstr "" -#: lib/elements/satin_column.py:397 +#: lib/elements/satin_column.py:405 #, python-format msgid "Position of underlay from between the rails. 0% is along the first rail, 50% is centered, 100% is along the second rail." msgstr "" -#: lib/elements/satin_column.py:405 +#: lib/elements/satin_column.py:413 msgid "Zig-zag underlay" msgstr "Zig-zag versteviging" -#: lib/elements/satin_column.py:405 lib/elements/satin_column.py:414 -#: lib/elements/satin_column.py:425 lib/elements/satin_column.py:445 -#: lib/elements/satin_column.py:458 +#: lib/elements/satin_column.py:413 lib/elements/satin_column.py:422 +#: lib/elements/satin_column.py:433 lib/elements/satin_column.py:453 +#: lib/elements/satin_column.py:466 msgid "Zig-zag Underlay" msgstr "Zig-zag Versteviging" -#: lib/elements/satin_column.py:411 +#: lib/elements/satin_column.py:419 msgid "Zig-Zag spacing (peak-to-peak)" msgstr "Zig-zag afstand (piek-naar-piek)" -#: lib/elements/satin_column.py:412 +#: lib/elements/satin_column.py:420 msgid "Distance between peaks of the zig-zags." msgstr "Afstand tussen pieken van de zig-zag steken." -#: lib/elements/satin_column.py:422 +#: lib/elements/satin_column.py:430 msgid "Inset amount (fixed)" msgstr "" -#: lib/elements/satin_column.py:423 lib/elements/satin_column.py:443 +#: lib/elements/satin_column.py:431 lib/elements/satin_column.py:451 msgid "default: half of contour underlay inset" msgstr "standaard: de helft van de versteviging randafstand" -#: lib/elements/satin_column.py:442 +#: lib/elements/satin_column.py:450 msgid "Inset amount (proportional)" msgstr "" -#: lib/elements/satin_column.py:456 +#: lib/elements/satin_column.py:464 msgid "Split stitch if distance of maximum stitch length is exceeded" msgstr "Splitsen van steek als afstand van maximale steeklengte wordt overschreden" @@ -2101,7 +2110,7 @@ msgstr "" msgid "* Use as satin column: add an other rail and optionally rungs." msgstr "" -#: lib/elements/stroke.py:45 inx/inkstitch_select_elements.inx:12 +#: lib/elements/stroke.py:45 msgid "Stroke" msgstr "Lijn" @@ -2117,11 +2126,11 @@ msgstr "" msgid "Ripple Stitch" msgstr "" -#: lib/elements/stroke.py:68 inx/inkstitch_select_elements.inx:21 +#: lib/elements/stroke.py:68 msgid "ZigZag Stitch" msgstr "" -#: lib/elements/stroke.py:69 inx/inkstitch_select_elements.inx:22 +#: lib/elements/stroke.py:69 msgid "Manual Stitch" msgstr "" @@ -2465,7 +2474,7 @@ msgstr "" msgid "This function copies Ink/Stitch parameters from the first selected element to the rest of the selection. Please select at least two elements." msgstr "Deze functie kopieert inkt-/steekparameters van het eerste geselecteerde element naar de rest van de selectie. Selecteer ten minste twee elementen." -#: lib/extensions/element_info.py:47 inx/inkstitch_select_elements.inx:15 +#: lib/extensions/element_info.py:47 msgid "Type" msgstr "" @@ -2720,7 +2729,7 @@ msgstr "Borduur Parameters" msgid "Please select at least two elements to reorder." msgstr "Selecteer ten minste twee elementen om te hergroeperen." -#: lib/extensions/select_elements.py:76 +#: lib/extensions/select_elements.py:81 msgid "Could not detect python path. Please insert python path manually as described in the help tab of the select elements dialog." msgstr "" @@ -2777,8 +2786,7 @@ msgstr "Beschrijving" #: lib/extensions/troubleshoot.py:111 lib/extensions/troubleshoot.py:157 #: inx/inkstitch_cleanup.inx:23 inx/inkstitch_element_info.inx:10 #: inx/inkstitch_remove_embroidery_settings.inx:39 -#: inx/inkstitch_select_elements.inx:77 inx/inkstitch_troubleshoot.inx:12 -#: inx/inkstitch_update_svg.inx:10 +#: inx/inkstitch_troubleshoot.inx:12 inx/inkstitch_update_svg.inx:10 msgid "Troubleshoot" msgstr "Probleemoplossen" @@ -2874,7 +2882,7 @@ msgstr "" #: inx/inkstitch_fill_to_stroke.inx:23 inx/inkstitch_generate_palette.inx:24 #: inx/inkstitch_gradient_blocks.inx:24 #: inx/inkstitch_lettering_along_path.inx:17 -#: inx/inkstitch_palette_to_text.inx:19 inx/inkstitch_select_elements.inx:69 +#: inx/inkstitch_palette_to_text.inx:19 #: inx/inkstitch_stroke_to_lpe_satin.inx:26 #: inx/inkstitch_zigzag_line_to_satin.inx:18 msgid "Help" @@ -3265,7 +3273,6 @@ msgid "Multicolor" msgstr "" #: lib/lettering/categories.py:26 inx/inkstitch_lettering_generate_json.inx:55 -#: inx/inkstitch_select_elements.inx:13 msgid "Running Stitch" msgstr "" @@ -4587,7 +4594,6 @@ msgid "Duplicate Params" msgstr "Dubbele parameters" #: inx/inkstitch_duplicate_params.inx:10 inx/inkstitch_reorder.inx:10 -#: inx/inkstitch_select_elements.inx:92 #: inx/inkstitch_selection_to_guide_line.inx:10 #: inx/inkstitch_selection_to_pattern.inx:10 inx/inkstitch_test_swatches.inx:10 msgid "Edit" @@ -5963,116 +5969,6 @@ msgstr "Verwijder Print Instellingen uit SVG metadata" msgid "Re-stack objects in order of selection" msgstr "Stapel objecten opnieuw in volgorde van selectie" -#: inx/inkstitch_select_elements.inx:3 -msgid "Select embroidery elements" -msgstr "" - -#: inx/inkstitch_select_elements.inx:8 -msgid "Select options" -msgstr "" - -#: inx/inkstitch_select_elements.inx:9 -msgid "Select Stitch Type" -msgstr "" - -#: inx/inkstitch_select_elements.inx:15 -msgid "Select only specific running stitches" -msgstr "" - -#: inx/inkstitch_select_elements.inx:16 inx/inkstitch_select_elements.inx:34 -#: inx/inkstitch_select_elements.inx:54 -msgid "No restriction" -msgstr "" - -#: inx/inkstitch_select_elements.inx:17 -msgid "Auto-Run Top Stitching" -msgstr "" - -#: inx/inkstitch_select_elements.inx:18 -msgid "Auto-Run Underpath" -msgstr "" - -#: inx/inkstitch_select_elements.inx:20 -msgid "Ripples" -msgstr "" - -#: inx/inkstitch_select_elements.inx:23 -msgid "Polyline" -msgstr "" - -#: inx/inkstitch_select_elements.inx:29 -msgid "Satin" -msgstr "" - -#: inx/inkstitch_select_elements.inx:31 -msgid "E-Stitch" -msgstr "" - -#: inx/inkstitch_select_elements.inx:33 -msgid "Only select satins with this underlay type" -msgstr "" - -#: inx/inkstitch_select_elements.inx:35 -msgid "No underlay" -msgstr "" - -#: inx/inkstitch_select_elements.inx:36 -msgid "Centerwalk" -msgstr "" - -#: inx/inkstitch_select_elements.inx:37 -msgid "Contour" -msgstr "" - -#: inx/inkstitch_select_elements.inx:38 -#: inx/inkstitch_zigzag_line_to_satin.inx:12 -msgid "Zigzag" -msgstr "" - -#: inx/inkstitch_select_elements.inx:45 inx/inkstitch_select_elements.inx:46 -msgid "Fill" -msgstr "" - -#: inx/inkstitch_select_elements.inx:53 -msgid "Only select fills with this underlay" -msgstr "" - -#: inx/inkstitch_select_elements.inx:56 -msgid "No Underlay" -msgstr "" - -#: inx/inkstitch_select_elements.inx:70 -msgid "Select embroidery objects" -msgstr "" - -#: inx/inkstitch_select_elements.inx:72 -msgid "Selects specific embroidery elements by stitch type." -msgstr "" - -#: inx/inkstitch_select_elements.inx:73 -msgid "If there is already an active selection, non maching elements will be deselected." -msgstr "" - -#: inx/inkstitch_select_elements.inx:79 -msgid "If this isn't working for you, you may need to insert your path to a python executable manualy." -msgstr "" - -#: inx/inkstitch_select_elements.inx:81 -msgid "* Windows: Open the \"Command Prompt\" and type \"where python\". Copy the path and paste it here." -msgstr "" - -#: inx/inkstitch_select_elements.inx:82 -msgid "* Linux: Open the command line and type \"which python3\". Copy the path and paste it here." -msgstr "" - -#: inx/inkstitch_select_elements.inx:83 -msgid "* macOS: doesn't work, sorry" -msgstr "" - -#: inx/inkstitch_select_elements.inx:84 -msgid "Python Path" -msgstr "" - #: inx/inkstitch_selection_to_guide_line.inx:3 msgid "Selection to guide line" msgstr "Selectie tot hulplijn" @@ -6259,6 +6155,10 @@ msgstr "" msgid "Sawtooth" msgstr "" +#: inx/inkstitch_zigzag_line_to_satin.inx:12 +msgid "Zigzag" +msgstr "" + #: inx/inkstitch_zigzag_line_to_satin.inx:14 msgid "Smoothing" msgstr "" -- cgit v1.3.1