From e82526b6085b867baed2cbdade617f3901e1120e Mon Sep 17 00:00:00 2001 From: Ink/Stitch Crowdin integration Date: Sat, 28 Dec 2024 01:23:21 +0000 Subject: new translations from Crowdin --- translations/messages_nl_NL.po | 209 ++++++++++++++++++++--------------------- 1 file changed, 100 insertions(+), 109 deletions(-) (limited to 'translations/messages_nl_NL.po') diff --git a/translations/messages_nl_NL.po b/translations/messages_nl_NL.po index 77f9be08..3ec96854 100644 --- a/translations/messages_nl_NL.po +++ b/translations/messages_nl_NL.po @@ -2,8 +2,8 @@ msgid "" msgstr "" "Project-Id-Version: inkstitch\n" "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n" -"POT-Creation-Date: 2024-12-27 01:24+0000\n" -"PO-Revision-Date: 2024-12-27 01:24\n" +"POT-Creation-Date: 2024-12-28 01:22+0000\n" +"PO-Revision-Date: 2024-12-28 01:23\n" "Last-Translator: \n" "Language-Team: Dutch\n" "MIME-Version: 1.0\n" @@ -12,7 +12,7 @@ msgstr "" "Generated-By: Babel 2.16.0\n" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-12-27 01:24+0000\n" +"POT-Creation-Date: 2024-12-28 01:22+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: \n" "Language-Team: LANGUAGE \n" @@ -1167,15 +1167,15 @@ msgstr "De hulplijn van dit object ligt niet binnen de objectgrenzen. De hulplij msgid "* Move the guide line into the element" msgstr "* Verplaats de hulplijn in het element" -#: lib/elements/fill_stitch.py:74 lib/elements/stroke.py:29 +#: lib/elements/fill_stitch.py:74 lib/elements/stroke.py:28 msgid "Multiple Guide Lines" msgstr "Meerdere hulplijnen" -#: lib/elements/fill_stitch.py:75 lib/elements/stroke.py:30 +#: lib/elements/fill_stitch.py:75 lib/elements/stroke.py:29 msgid "This object has multiple guide lines, but only the first one will be used." msgstr "Dit object heeft meerdere hulplijnen, maar alleen de eerste zal worden gebruikt." -#: lib/elements/fill_stitch.py:77 lib/elements/stroke.py:32 +#: lib/elements/fill_stitch.py:77 lib/elements/stroke.py:31 msgid "* Remove all guide lines, except for one." msgstr "* Verwijder alle hulplijnen, behalve één." @@ -1503,7 +1503,7 @@ msgid "Travel inside the shape when moving from section to section. Underpath s msgstr "Beweeg binnen de vorm bij verplaatsen tussen secties. Onderpad steken vermijden de richting van de rijhoek zodat ze niet zichtbaar zijn. Dit geeft ze een gekarteld uiterlijk." #: lib/elements/fill_stitch.py:455 lib/elements/satin_column.py:364 -#: lib/elements/stroke.py:123 +#: lib/elements/stroke.py:122 msgid "Running stitch length" msgstr "Doorlopende steek lengte" @@ -1519,46 +1519,46 @@ msgstr "Tolerantie lopende steek" msgid "Determines how hard Ink/Stitch tries to avoid stitching outside the shape.Lower numbers are less likely to stitch outside the shape but require more stitches." msgstr "" -#: lib/elements/fill_stitch.py:492 lib/elements/stroke.py:149 +#: lib/elements/fill_stitch.py:492 lib/elements/stroke.py:148 msgid "Randomize stitch length" msgstr "" -#: lib/elements/fill_stitch.py:493 lib/elements/stroke.py:150 +#: lib/elements/fill_stitch.py:493 lib/elements/stroke.py:149 msgid "Randomize stitch length and phase instead of dividing evenly or staggering. This is recommended for closely-spaced curved fills to avoid Moiré artefacts." msgstr "" -#: lib/elements/fill_stitch.py:509 lib/elements/stroke.py:162 +#: lib/elements/fill_stitch.py:509 lib/elements/stroke.py:161 msgid "Random stitch length jitter" msgstr "" -#: lib/elements/fill_stitch.py:510 lib/elements/stroke.py:163 +#: lib/elements/fill_stitch.py:510 lib/elements/stroke.py:162 msgid "Amount to vary the length of each stitch by when randomizing." msgstr "" #: lib/elements/fill_stitch.py:525 lib/elements/satin_column.py:500 -#: lib/elements/stroke.py:85 +#: lib/elements/stroke.py:84 msgid "Repeats" msgstr "Herhalingen" -#: lib/elements/fill_stitch.py:526 lib/elements/stroke.py:86 +#: lib/elements/fill_stitch.py:526 lib/elements/stroke.py:85 msgid "Defines how many times to run down and back along the path." msgstr "Bepaalt hoe vaak op en neer langs een pad wordt gegaan." -#: lib/elements/fill_stitch.py:537 lib/elements/stroke.py:97 +#: lib/elements/fill_stitch.py:537 lib/elements/stroke.py:96 msgid "Bean stitch number of repeats" msgstr "Bonensteek aantal herhalingen" -#: lib/elements/fill_stitch.py:538 lib/elements/stroke.py:98 +#: lib/elements/fill_stitch.py:538 lib/elements/stroke.py:97 msgid "Backtrack each stitch this many times. A value of 1 would triple each stitch (forward, back, forward). A value of 2 would quintuple each stitch, etc.\n\n" "A pattern with various repeats can be created with a list of values separated by a space." msgstr "" #: lib/elements/fill_stitch.py:553 lib/elements/satin_column.py:250 -#: lib/elements/stroke.py:188 +#: lib/elements/stroke.py:187 msgid "Zig-zag spacing (peak-to-peak)" msgstr "Zig-zag afstand (piek-naar-piek)" -#: lib/elements/fill_stitch.py:554 lib/elements/stroke.py:189 +#: lib/elements/fill_stitch.py:554 lib/elements/stroke.py:188 msgid "Length of stitches in zig-zag mode." msgstr "Lengte van steken in zig-zag modus." @@ -1587,7 +1587,7 @@ msgid "Defines width of a herringbone pattern. Use 0 for regular rows." msgstr "" #: lib/elements/fill_stitch.py:605 lib/elements/satin_column.py:278 -#: lib/elements/stroke.py:201 +#: lib/elements/stroke.py:200 msgid "Pull compensation" msgstr "Trek compensatie" @@ -1643,7 +1643,7 @@ msgstr "Opvulrij afstand" msgid "default: 3x fill row spacing" msgstr "standaard: 3x opvulrij afstand" -#: lib/elements/fill_stitch.py:690 lib/elements/stroke.py:174 +#: lib/elements/fill_stitch.py:690 lib/elements/stroke.py:173 #: lib/extensions/element_info.py:131 lib/extensions/element_info.py:187 msgid "Max stitch length" msgstr "Max steek lengte" @@ -1657,12 +1657,12 @@ msgid "Shrink the shape before doing underlay, to prevent underlay from showing msgstr "Verklein de vorm van de versteviging om te voorkomen dat de versteviging zichtbaar is aan de buitenkant van de opvulling." #: lib/elements/fill_stitch.py:736 lib/elements/satin_column.py:581 -#: lib/elements/stroke.py:434 lib/gui/satin_multicolor/colorize_panel.py:57 +#: lib/elements/stroke.py:433 lib/gui/satin_multicolor/colorize_panel.py:57 msgid "Random seed" msgstr "" #: lib/elements/fill_stitch.py:737 lib/elements/satin_column.py:582 -#: lib/elements/stroke.py:435 +#: lib/elements/stroke.py:434 msgid "Use a specific seed for randomized attributes. Uses the element ID if empty." msgstr "" @@ -1706,7 +1706,7 @@ msgstr "* Ga naar de Lijnstijl tab" msgid "* Under \"Markers\" choose the first (empty) option in the first dropdown list." msgstr "* Kies onder \"Markers\" de eerste (lege) optie in de eerste dropdown lijst." -#: lib/elements/satin_column.py:32 lib/elements/stroke.py:37 +#: lib/elements/satin_column.py:32 lib/elements/stroke.py:36 msgid "Too few subpaths" msgstr "Te weinig subpaden" @@ -1840,7 +1840,7 @@ msgstr "" msgid "Zig-zag" msgstr "" -#: lib/elements/satin_column.py:119 lib/elements/stroke.py:75 +#: lib/elements/satin_column.py:119 lib/elements/stroke.py:74 #: inx/inkstitch_break_apart.inx:9 msgid "Method" msgstr "Methode" @@ -1954,27 +1954,27 @@ msgstr "" msgid "Satin stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This setting expands each pair of needle penetrations outward from the center of the satin column by a fixed length. Two values separated by a space may be used for an asymmetric effect." msgstr "" -#: lib/elements/satin_column.py:293 lib/elements/stroke.py:336 +#: lib/elements/satin_column.py:293 lib/elements/stroke.py:335 msgid "Automatic" msgstr "" -#: lib/elements/satin_column.py:294 lib/elements/stroke.py:337 +#: lib/elements/satin_column.py:294 lib/elements/stroke.py:336 msgid "Don't reverse" msgstr "" -#: lib/elements/satin_column.py:295 lib/elements/stroke.py:338 +#: lib/elements/satin_column.py:295 lib/elements/stroke.py:337 msgid "Reverse first rail" msgstr "" -#: lib/elements/satin_column.py:296 lib/elements/stroke.py:339 +#: lib/elements/satin_column.py:296 lib/elements/stroke.py:338 msgid "Reverse second rail" msgstr "" -#: lib/elements/satin_column.py:297 lib/elements/stroke.py:340 +#: lib/elements/satin_column.py:297 lib/elements/stroke.py:339 msgid "Reverse both rails" msgstr "" -#: lib/elements/satin_column.py:303 lib/elements/stroke.py:346 +#: lib/elements/satin_column.py:303 lib/elements/stroke.py:345 msgid "Reverse rails" msgstr "" @@ -2034,7 +2034,7 @@ msgid "Stitch length" msgstr "Steek lengte" #: lib/elements/satin_column.py:425 lib/elements/satin_column.py:482 -#: lib/elements/stroke.py:135 +#: lib/elements/stroke.py:134 msgid "Stitch tolerance" msgstr "" @@ -2119,215 +2119,215 @@ msgstr "" msgid "Split stitch if distance of maximum stitch length is exceeded" msgstr "Splitsen van steek als afstand van maximale steeklengte wordt overschreden" -#: lib/elements/stroke.py:38 +#: lib/elements/stroke.py:37 msgid "This element renders as running stitch while it has a satin column parameter." msgstr "" -#: lib/elements/stroke.py:40 +#: lib/elements/stroke.py:39 msgid "* Convert to stroke: select the element and open the parameter dialog. Enable running stitch along path." msgstr "" -#: lib/elements/stroke.py:41 +#: lib/elements/stroke.py:40 msgid "* Use as satin column: add an other rail and optionally rungs." msgstr "" -#: lib/elements/stroke.py:47 lib/extensions/params.py:597 +#: lib/elements/stroke.py:46 lib/extensions/params.py:597 #: inx/inkstitch_select_elements.inx:12 msgid "Stroke" msgstr "Lijn" -#: lib/elements/stroke.py:50 lib/extensions/params.py:271 +#: lib/elements/stroke.py:49 lib/extensions/params.py:271 msgid "Running stitch along paths" msgstr "Lopende steek langs paden" -#: lib/elements/stroke.py:68 +#: lib/elements/stroke.py:67 msgid "Running Stitch / Bean Stitch" msgstr "" -#: lib/elements/stroke.py:69 lib/lettering/categories.py:26 +#: lib/elements/stroke.py:68 lib/lettering/categories.py:26 #: inx/inkstitch_lettering_generate_json.inx:48 msgid "Ripple Stitch" msgstr "" -#: lib/elements/stroke.py:70 inx/inkstitch_select_elements.inx:23 +#: lib/elements/stroke.py:69 inx/inkstitch_select_elements.inx:23 msgid "ZigZag Stitch" msgstr "" -#: lib/elements/stroke.py:71 inx/inkstitch_select_elements.inx:24 +#: lib/elements/stroke.py:70 inx/inkstitch_select_elements.inx:24 msgid "Manual Stitch" msgstr "" -#: lib/elements/stroke.py:111 +#: lib/elements/stroke.py:110 msgid "Manual stitch placement" msgstr "" -#: lib/elements/stroke.py:112 +#: lib/elements/stroke.py:111 msgid "No extra stitches will be added to the original ripple pattern and the running stitch length value will be ignored." msgstr "" -#: lib/elements/stroke.py:124 +#: lib/elements/stroke.py:123 msgid "Length of stitches. Stitches can be shorter according to the stitch tolerance setting." msgstr "" -#: lib/elements/stroke.py:136 +#: lib/elements/stroke.py:135 msgid "All stitches must be within this distance from the path. A lower tolerance means stitches will be closer together. A higher tolerance means sharp corners may be rounded." msgstr "Alle steken moeten binnen deze afstand van het pad liggen. Een lagere tolerantie betekent dat de steken dichter bij elkaar komen te liggen. Een hogere tolerantie betekent dat scherpe hoeken mogen worden afgerond." -#: lib/elements/stroke.py:175 +#: lib/elements/stroke.py:174 msgid "Split stitches longer than this." msgstr "" -#: lib/elements/stroke.py:202 +#: lib/elements/stroke.py:201 msgid "Zigzag stitches pull the fabric together, resulting in a column narrower than you draw in Inkscape. This widens the zigzag line width." msgstr "" -#: lib/elements/stroke.py:215 +#: lib/elements/stroke.py:214 msgid "Number of lines" msgstr "Aantal regels" -#: lib/elements/stroke.py:216 +#: lib/elements/stroke.py:215 msgid "Number of lines from start to finish" msgstr "Aantal regels van begin tot eind" -#: lib/elements/stroke.py:227 +#: lib/elements/stroke.py:226 msgid "Minimum line distance" msgstr "" -#: lib/elements/stroke.py:228 +#: lib/elements/stroke.py:227 msgid "Overrides the number of lines setting." msgstr "" -#: lib/elements/stroke.py:242 +#: lib/elements/stroke.py:241 msgid "Render at rungs" msgstr "" -#: lib/elements/stroke.py:243 +#: lib/elements/stroke.py:242 msgid "Position satin guided pattern at rungs." msgstr "" -#: lib/elements/stroke.py:253 +#: lib/elements/stroke.py:252 msgid "Stagger lines this many times before repeating" msgstr "" -#: lib/elements/stroke.py:254 +#: lib/elements/stroke.py:253 msgid "Length of the cycle by which successive stitch lines are staggered. Fractional values are allowed and can have less visible diagonals than integer values. A value of 0 (default) disables staggering and instead stitches evenly.For linear ripples only." msgstr "" -#: lib/elements/stroke.py:267 +#: lib/elements/stroke.py:266 msgid "Skip first lines" msgstr "Eerste regels overslaan" -#: lib/elements/stroke.py:268 +#: lib/elements/stroke.py:267 msgid "Skip this number of lines at the beginning." msgstr "Sla dit aantal regels aan het begin over." -#: lib/elements/stroke.py:279 +#: lib/elements/stroke.py:278 msgid "Skip last lines" msgstr "Laatste regels overslaan" -#: lib/elements/stroke.py:280 +#: lib/elements/stroke.py:279 msgid "Skip this number of lines at the end" msgstr "Sla dit aantal regels aan het eind over" -#: lib/elements/stroke.py:291 +#: lib/elements/stroke.py:290 msgid "Flip every second line" msgstr "" -#: lib/elements/stroke.py:292 +#: lib/elements/stroke.py:291 msgid "Linear ripple: wether to flip the pattern every second line or not." msgstr "" -#: lib/elements/stroke.py:302 +#: lib/elements/stroke.py:301 msgid "Line distance exponent" msgstr "Regelafstand exponent" -#: lib/elements/stroke.py:303 +#: lib/elements/stroke.py:302 msgid "Increase density towards one side." msgstr "Verhoog de dichtheid naar één kant." -#: lib/elements/stroke.py:314 +#: lib/elements/stroke.py:313 msgid "Flip exponent" msgstr "Spiegelen exponent" -#: lib/elements/stroke.py:315 +#: lib/elements/stroke.py:314 msgid "Reverse exponent effect." msgstr "Omgekeerd exponent effect." -#: lib/elements/stroke.py:326 +#: lib/elements/stroke.py:325 msgid "Reverse" msgstr "Omgekeerd" -#: lib/elements/stroke.py:327 +#: lib/elements/stroke.py:326 msgid "Flip start and end point" msgstr "Begin- en eindpunt spiegelen" -#: lib/elements/stroke.py:347 +#: lib/elements/stroke.py:346 msgid "Reverse satin ripple rails. Default: automatically detect and fix a reversed rail." msgstr "" -#: lib/elements/stroke.py:359 +#: lib/elements/stroke.py:358 msgid "Grid size" msgstr "Rastergrootte" -#: lib/elements/stroke.py:360 +#: lib/elements/stroke.py:359 msgid "Render as grid. Use with care and watch your stitch density." msgstr "Weergeven als raster. Wees voorzichtig en let op de steekdichtheid." -#: lib/elements/stroke.py:372 +#: lib/elements/stroke.py:371 msgid "Scale axis" msgstr "Schaal as" -#: lib/elements/stroke.py:373 +#: lib/elements/stroke.py:372 msgid "Scale axis for satin guided ripple stitches." msgstr "Schaal as voor satijngeleide ribbelsteken." -#: lib/elements/stroke.py:377 lib/gui/edit_json/settings_panel.py:145 +#: lib/elements/stroke.py:376 lib/gui/edit_json/settings_panel.py:145 #: print/templates/ui.html:180 inx/inkstitch_remove_embroidery_settings.inx:12 #: inx/inkstitch_remove_embroidery_settings.inx:117 msgid "None" msgstr "Geen" -#: lib/elements/stroke.py:385 +#: lib/elements/stroke.py:384 msgid "Starting scale" msgstr "Beginschaal" -#: lib/elements/stroke.py:386 +#: lib/elements/stroke.py:385 msgid "How big the first copy of the line should be, in percent." msgstr "Hoe groot het eerste exemplaar van de regel moet zijn, in procenten." -#: lib/elements/stroke.py:386 lib/elements/stroke.py:398 +#: lib/elements/stroke.py:385 lib/elements/stroke.py:397 msgid "Used only for ripple stitch with a guide line." msgstr "Alleen gebruikt voor ribbelsteek met een hulplijn." -#: lib/elements/stroke.py:397 +#: lib/elements/stroke.py:396 msgid "Ending scale" msgstr "Eindschaal" -#: lib/elements/stroke.py:398 +#: lib/elements/stroke.py:397 msgid "How big the last copy of the line should be, in percent." msgstr "Hoe groot het laatste exemplaar van de regel moet zijn, in procenten." -#: lib/elements/stroke.py:409 lib/gui/tartan/customize_panel.py:43 +#: lib/elements/stroke.py:408 lib/gui/tartan/customize_panel.py:43 msgid "Rotate" msgstr "Draaien" -#: lib/elements/stroke.py:410 +#: lib/elements/stroke.py:409 msgid "Rotate satin guided ripple stitches" msgstr "Roteer satijnhulp ribbelsteken" -#: lib/elements/stroke.py:421 +#: lib/elements/stroke.py:420 msgid "Join style" msgstr "Knooppunt stijl" -#: lib/elements/stroke.py:422 +#: lib/elements/stroke.py:421 msgid "Join style for non circular ripples." msgstr "Knooppunt stijl voor niet circulaire golven." -#: lib/elements/stroke.py:425 +#: lib/elements/stroke.py:424 msgid "flat" msgstr "plat" -#: lib/elements/stroke.py:425 +#: lib/elements/stroke.py:424 msgid "point" msgstr "punt" @@ -2798,7 +2798,7 @@ msgstr "Deze parameter wordt opgeslagen als je \"Toepassen en Afsluiten\" klikt" #: lib/extensions/params.py:529 lib/gui/edit_json/settings_panel.py:61 #: lib/gui/lettering/main_panel.py:58 lib/gui/lettering_font_sample.py:61 -#: lib/gui/lettering_kerning.py:84 lib/gui/satin_multicolor/main_panel.py:54 +#: lib/gui/satin_multicolor/main_panel.py:54 #: lib/gui/simulator/simulator_preferences.py:44 #: lib/gui/tartan/main_panel.py:67 print/templates/custom-page.html:23 #: print/templates/custom-page.html:27 print/templates/custom-page.html:33 @@ -3020,7 +3020,7 @@ msgstr "garenlijst" #: lib/gui/abort_message.py:38 lib/gui/apply_palette.py:64 #: lib/gui/edit_json/help_panel.py:27 lib/gui/element_info.py:56 -#: lib/gui/lettering_font_sample.py:89 lib/gui/lettering_kerning.py:113 +#: lib/gui/lettering_font_sample.py:89 #: lib/gui/satin_multicolor/help_panel.py:27 lib/gui/tartan/help_panel.py:27 msgid "More information on our website:" msgstr "" @@ -3054,7 +3054,7 @@ msgid "Select color palette" msgstr "" #: lib/gui/apply_palette.py:44 lib/gui/edit_json/settings_panel.py:63 -#: lib/gui/lettering_font_sample.py:63 lib/gui/lettering_kerning.py:86 +#: lib/gui/lettering_font_sample.py:63 #: lib/gui/satin_multicolor/main_panel.py:56 #: lib/gui/simulator/simulator_preferences.py:46 #: lib/gui/tartan/main_panel.py:69 lib/gui/test_swatches.py:117 @@ -3063,7 +3063,7 @@ msgstr "" #: lib/gui/apply_palette.py:49 lib/gui/edit_json/main_panel.py:64 #: lib/gui/element_info.py:41 lib/gui/lettering/main_panel.py:48 -#: lib/gui/lettering_font_sample.py:74 lib/gui/lettering_kerning.py:98 +#: lib/gui/lettering_font_sample.py:74 #: lib/gui/satin_multicolor/main_panel.py:51 lib/gui/tartan/main_panel.py:64 #: lib/gui/test_swatches.py:83 inx/inkstitch_apply_threadlist.inx:89 #: inx/inkstitch_auto_run.inx:25 inx/inkstitch_auto_satin.inx:16 @@ -3111,6 +3111,18 @@ msgstr "" msgid "https://inkstitch.org/docs/font-tools/#edit-json" msgstr "" +#: lib/gui/edit_json/main_panel.py:278 +msgid "Could not read json file." +msgstr "" + +#: lib/gui/edit_json/settings_panel.py:23 +msgid "Text before" +msgstr "" + +#: lib/gui/edit_json/settings_panel.py:26 +msgid "Text after" +msgstr "" + #: lib/gui/edit_json/settings_panel.py:44 msgid "Font Info" msgstr "" @@ -3332,9 +3344,8 @@ msgid "Font Sampling" msgstr "" #: lib/gui/edit_json/main_panel.py:63 lib/gui/lettering_font_sample.py:31 -#: lib/gui/lettering_kerning.py:56 lib/gui/simulator/view_panel.py:122 -#: print/templates/ui.html:5 print/templates/ui.html:15 -#: inx/inkstitch_lettering_generate_json.inx:60 +#: lib/gui/simulator/view_panel.py:122 print/templates/ui.html:5 +#: print/templates/ui.html:15 inx/inkstitch_lettering_generate_json.inx:60 #: inx/inkstitch_png_realistic.inx:14 inx/inkstitch_png_simple.inx:14 msgid "Settings" msgstr "Instellingen" @@ -3374,26 +3385,6 @@ msgstr "" msgid "Found duplicated glyphs in font file: {duplicated_glyphs}" msgstr "" -#: lib/gui/edit_json/settings_panel.py:23 lib/gui/lettering_kerning.py:64 -msgid "Text before" -msgstr "" - -#: lib/gui/edit_json/settings_panel.py:26 lib/gui/lettering_kerning.py:67 -msgid "Text after" -msgstr "" - -#: lib/gui/lettering_kerning.py:105 -msgid "Feature to verify or update kerning information for an existing font." -msgstr "" - -#: lib/gui/lettering_kerning.py:119 lib/gui/lettering_kerning.py:120 -msgid "https://inkstitch.org/docs/font-tools/#kerning-tool" -msgstr "" - -#: lib/gui/edit_json/main_panel.py:280 lib/gui/lettering_kerning.py:215 -msgid "Could not read json file." -msgstr "" - #: lib/gui/preferences.py:16 lib/gui/preferences.py:17 #: inx/inkstitch_preferences.inx:3 msgid "Preferences" -- cgit v1.3.1