{# these parameters are for g-code files (*.txt) #}
    <param name="laser_mode" type="boolean" gui-text="{{ _("laser mode") }}" gui-description="{{ _("Laser mode (generate g-code for grbl laser mode)") }}">false</param>
    <param name="dynamic_laser_power" type="boolean" gui-text="{{ _("dynamic laser power") }}" gui-description="{{ _("Use Grbl's M4 dynamic laser power mode.  Ensures consistent laser cutting power regardless of motor speed.  Only for PWM-capable lasers.") }}" min="0.0" max="5.0">true</param>
    <param name="laser_warm_up_time" type="float" gui-text="{{ _("laser warm-up time") }}" gui-description="{{ _("When turning on the laser, wait this many seconds for laser to warm up (G4 command)") }}">0.0</param>
    <param name="flip_x" type="boolean" gui-text="{{ _("negate X coordinate values") }}" gui-description="{{ _("Negate x coordinates") }}">false</param>
    <param name="flip_y" type="boolean" gui-text="{{ _("negate Y coordinate values") }}" gui-description="{{ _("Negate y coordinates") }}">false</param>
    <param name="stitch_z_travel" type="float" gui-text="{{ _("Z travel per stitch") }}" gui-description="{{ _("increment z coordinate by this amount per stitch") }}">5.0</param>
    <param name="spindle_speed" type="int" gui-text="{{ _("spindle speed") }}" gui-description="{{ _("spindle speed (laser power for laser mode, set to -1 to omit)") }}" min="-1" max="1000000000">-1</param>
    <param name="min_spindle_speed" type="int" gui-text="{{ _("min spindle speed") }}" gui-description="{{ _("minimum spindle speed value (grbl $31 setting)") }}" min="-1" max="1000000000">-1</param>
    <param name="max_spindle_speed" type="int" gui-text="{{ _("max spindle speed") }}" gui-description="{{ _("minimum spindle speed value (grbl $30 setting)") }}" min="-1" max="1000000000">-1</param>
    <param name="feed_rate" type="int" gui-description="{{ _("feed rate (in mm/min, set to -1 to omit)")}}" min="-1" max="1000000000">-1</param>