new translations from Crowdin

1 files changed, 120 insertions, 84 deletions

diff --git a/translations/messages_de_DE.po b/translations/messages_de_DE.po
index aac66b27..34778152 100644
--- a/translations/messages_de_DE.po
+++ b/translations/messages_de_DE.po
@@ -2,8 +2,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: inkstitch\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2022-06-22 02:34+0000\n"
-"PO-Revision-Date: 2022-06-22 02:35\n"
+"POT-Creation-Date: 2022-06-23 02:23+0000\n"
+"PO-Revision-Date: 2022-06-24 02:26\n"
 "Last-Translator: \n"
 "Language-Team: German\n"
 "MIME-Version: 1.0\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-06-22 02:34+0000\n"
+"POT-Creation-Date: 2022-06-23 02:23+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -757,7 +757,7 @@ msgstr "Kleines Füllobjekt"
 msgid "This fill object is so small that it would probably look better as running stitch or satin column. For very small shapes, fill stitch is not possible, and Ink/Stitch will use running stitch around the outline instead."
 msgstr "Dieses Füllobjekt ist so klein, dass es sich besser für einen Geradstich oder Satinstich eignet. Bei sehr kleinen Objekten ist ein Füllstich nicht möglich und Ink/Stitch nutzt automatisch einen Geradstich um die Außenränder herum."
 
-#: lib/elements/fill_stitch.py:35 lib/elements/fill_stitch.py:443
+#: lib/elements/fill_stitch.py:35 lib/elements/fill_stitch.py:465
 msgid "Expand"
 msgstr "Erweitern"
 
@@ -765,7 +765,7 @@ msgstr "Erweitern"
 msgid "The expand parameter for this fill object cannot be applied. Ink/Stitch will ignore it and will use original size instead."
 msgstr "Die \"Erweitern\"-Einstellung für dieses Füll-Objekt kann nicht angewendet werden. Ink/Stitch wird diese Einstellung ignorieren und stattdessen die Originalgröße nutzen."
 
-#: lib/elements/fill_stitch.py:41 lib/elements/fill_stitch.py:420
+#: lib/elements/fill_stitch.py:41 lib/elements/fill_stitch.py:442
 msgid "Inset"
 msgstr "Einzug"
 
@@ -871,159 +871,183 @@ msgid "Legacy Fill"
 msgstr "Veraltete Füllung"
 
 #: lib/elements/fill_stitch.py:114
+msgid "Guided Fill Strategy"
+msgstr ""
+
+#: lib/elements/fill_stitch.py:115
+msgid "Copy"
+msgstr ""
+
+#: lib/elements/fill_stitch.py:115
+msgid "Parallel Offset"
+msgstr ""
+
+#: lib/elements/fill_stitch.py:116
+msgid "Copy (the default) will fill the shape with shifted copies of the line.Parallel offset will ensure that each line is always a consistent distance from its neighbor.Sharp corners may be introduced."
+msgstr ""
+
+#: lib/elements/fill_stitch.py:123
 msgid "Contour Fill Strategy"
 msgstr "Methode"
 
-#: lib/elements/fill_stitch.py:115
+#: lib/elements/fill_stitch.py:124
 msgid "Inner to Outer"
 msgstr "Von Innen nach Außen"
 
-#: lib/elements/fill_stitch.py:115
+#: lib/elements/fill_stitch.py:124
 msgid "Single spiral"
 msgstr "Einfache Spirale"
 
-#: lib/elements/fill_stitch.py:115
+#: lib/elements/fill_stitch.py:124
 msgid "Double spiral"
 msgstr "Doppelte Spirale"
 
-#: lib/elements/fill_stitch.py:120
+#: lib/elements/fill_stitch.py:129
 msgid "Join Style"
 msgstr "Stil der Verbindungen"
 
-#: lib/elements/fill_stitch.py:121
+#: lib/elements/fill_stitch.py:130
 msgid "Round"
 msgstr "Rund"
 
-#: lib/elements/fill_stitch.py:121
+#: lib/elements/fill_stitch.py:130
 msgid "Mitered"
 msgstr "Spitz"
 
-#: lib/elements/fill_stitch.py:121
+#: lib/elements/fill_stitch.py:130
 msgid "Beveled"
 msgstr "Abgeschrägt"
 
-#: lib/elements/fill_stitch.py:126
+#: lib/elements/fill_stitch.py:135
 msgid "Avoid self-crossing"
 msgstr "Selbstüberschneidung vermeiden"
 
-#: lib/elements/fill_stitch.py:131
+#: lib/elements/fill_stitch.py:140
 msgid "Clockwise"
 msgstr "Uhrzeigersinn"
 
-#: lib/elements/fill_stitch.py:137
+#: lib/elements/fill_stitch.py:146
 msgid "Angle of lines of stitches"
 msgstr "Winkel der Stichlinien"
 
-#: lib/elements/fill_stitch.py:138
+#: lib/elements/fill_stitch.py:147
 msgid "The angle increases in a counter-clockwise direction.  0 is horizontal.  Negative angles are allowed."
 msgstr "Der Winkel nimmt gegen den Uhrzeigersinn zu. 0 ist horizontal. Negative Winkel sind erlaubt."
 
-#: lib/elements/fill_stitch.py:156 lib/elements/fill_stitch.py:432
+#: lib/elements/fill_stitch.py:165 lib/elements/fill_stitch.py:454
 msgid "Skip last stitch in each row"
 msgstr "Letzten Stich in jeder Reihe überspringen"
 
-#: lib/elements/fill_stitch.py:157 lib/elements/fill_stitch.py:433
+#: lib/elements/fill_stitch.py:166 lib/elements/fill_stitch.py:455
 msgid "The last stitch in each row is quite close to the first stitch in the next row.  Skipping it decreases stitch count and density."
 msgstr "Der letzte Stich einer Reihe ist sehr nah an dem ersten Stich der nächsten Reihe. Ihn zu überspringen verringert Stichanzahl und Dichte."
 
-#: lib/elements/fill_stitch.py:170
+#: lib/elements/fill_stitch.py:179
 msgid "Flip fill (start right-to-left)"
 msgstr "Rückwärtsfüllung (von rechts nach links)"
 
-#: lib/elements/fill_stitch.py:171
+#: lib/elements/fill_stitch.py:180
 msgid "The flip option can help you with routing your stitch path.  When you enable flip, stitching goes from right-to-left instead of left-to-right."
 msgstr "Die Umkehr-Option kann bei der Reihenfolge des Stichpfads helfen. Wenn Umdrehen aktiviert wird, wird das Sticken von rechts nach links anstatt von links nach rechts ausgeführt."
 
-#: lib/elements/fill_stitch.py:182
+#: lib/elements/fill_stitch.py:191
 msgid "Spacing between rows"
 msgstr "Reihenabstand"
 
-#: lib/elements/fill_stitch.py:183
+#: lib/elements/fill_stitch.py:192
 msgid "Distance between rows of stitches."
 msgstr "Abstand zwischen den Stichreihen."
 
-#: lib/elements/fill_stitch.py:197
+#: lib/elements/fill_stitch.py:206
 msgid "Maximum fill stitch length"
 msgstr "Maximale Füllstichlänge"
 
-#: lib/elements/fill_stitch.py:198
+#: lib/elements/fill_stitch.py:207
 msgid "The length of each stitch in a row.  Shorter stitch may be used at the start or end of a row."
 msgstr "Die Stichlänge in einer Reihe. Ein kürzerer Stich kann am Anfang oder am Ende einer Reihe verwendet werden."
 
-#: lib/elements/fill_stitch.py:209
+#: lib/elements/fill_stitch.py:218
 msgid "Stagger rows this many times before repeating"
 msgstr "Reihenanzahl bis sich das Muster wiederholt"
 
-#: lib/elements/fill_stitch.py:210
+#: lib/elements/fill_stitch.py:219
 msgid "Setting this dictates how many rows apart the stitches will be before they fall in the same column position."
 msgstr "Die Einstellung bestimmt, wie viele Reihen die Stiche voneinander entfernt sind, bevor sie in die gleiche Kolumneposition münden."
 
-#: lib/elements/fill_stitch.py:359
+#: lib/elements/fill_stitch.py:368
 msgid "Running stitch length (traversal between sections)"
 msgstr "Geradstichlänge (zwischen den Abschnitten)"
 
-#: lib/elements/fill_stitch.py:360
+#: lib/elements/fill_stitch.py:369
 msgid "Length of stitches around the outline of the fill region used when moving from section to section."
 msgstr "Stichlänge um den Umriss des Füllbereichs, der beim Übergang von Abschnitt zu Abschnitt verwendet wird."
 
-#: lib/elements/fill_stitch.py:370
+#: lib/elements/fill_stitch.py:380 lib/elements/stroke.py:116
+msgid "Running stitch tolerance"
+msgstr ""
+
+#: lib/elements/fill_stitch.py:381
+msgid "All stitches must be within this distance of the path.  A lower tolerance means stitches will be closer together.  A higher tolerance means sharp corners may be rounded."
+msgstr ""
+
+#: lib/elements/fill_stitch.py:392
 msgid "Underlay"
 msgstr "Unterlage"
 
-#: lib/elements/fill_stitch.py:370 lib/elements/fill_stitch.py:379
-#: lib/elements/fill_stitch.py:402 lib/elements/fill_stitch.py:413
-#: lib/elements/fill_stitch.py:423 lib/elements/fill_stitch.py:435
-#: lib/elements/fill_stitch.py:473
+#: lib/elements/fill_stitch.py:392 lib/elements/fill_stitch.py:401
+#: lib/elements/fill_stitch.py:424 lib/elements/fill_stitch.py:435
+#: lib/elements/fill_stitch.py:445 lib/elements/fill_stitch.py:457
+#: lib/elements/fill_stitch.py:495
 msgid "Fill Underlay"
 msgstr "Füllung Unterlage"
 
-#: lib/elements/fill_stitch.py:376
+#: lib/elements/fill_stitch.py:398
 msgid "Fill angle"
 msgstr "Füllwinkel"
 
-#: lib/elements/fill_stitch.py:377
+#: lib/elements/fill_stitch.py:399
 msgid "Default: fill angle + 90 deg. Insert comma-seperated list for multiple layers."
 msgstr "Standard: Füllwinkel + 90 Grad. Füge durch Kommata getrennte Werte ein, um mehrere Unterlagen zu erzeugen (z.B. 45, -45)."
 
-#: lib/elements/fill_stitch.py:399
+#: lib/elements/fill_stitch.py:421
 msgid "Row spacing"
 msgstr "Reihenabstand"
 
-#: lib/elements/fill_stitch.py:400
+#: lib/elements/fill_stitch.py:422
 msgid "default: 3x fill row spacing"
 msgstr "Standard: 3x Füllreihenabstand"
 
-#: lib/elements/fill_stitch.py:410
+#: lib/elements/fill_stitch.py:432
 msgid "Max stitch length"
 msgstr "Maximale Stichlänge"
 
-#: lib/elements/fill_stitch.py:411
+#: lib/elements/fill_stitch.py:433
 msgid "default: equal to fill max stitch length"
 msgstr "Standard: entspricht der maximalen Stichlänge"
 
-#: lib/elements/fill_stitch.py:421
+#: lib/elements/fill_stitch.py:443
 msgid "Shrink the shape before doing underlay, to prevent underlay from showing around the outside of the fill."
 msgstr "Verkleinern Sie die Unterlage, um zu verhindern, dass die Unterlage an der Außenseite der Füllstiche sichtbar wird."
 
-#: lib/elements/fill_stitch.py:444
+#: lib/elements/fill_stitch.py:466
 msgid "Expand the shape before fill stitching, to compensate for gaps between shapes."
 msgstr "Fülstichform erweitern, um Lücken zwischen den Formen auszugleichen."
 
-#: lib/elements/fill_stitch.py:455 lib/elements/fill_stitch.py:469
+#: lib/elements/fill_stitch.py:477 lib/elements/fill_stitch.py:491
 msgid "Underpath"
 msgstr "Verbindungsstiche innerhalb des Objektes"
 
-#: lib/elements/fill_stitch.py:456 lib/elements/fill_stitch.py:470
+#: lib/elements/fill_stitch.py:478 lib/elements/fill_stitch.py:492
 msgid "Travel inside the shape when moving from section to section.  Underpath stitches avoid traveling in the direction of the row angle so that they are not visible.  This gives them a jagged appearance."
 msgstr "Stiche zum Verbinden der Teilbereiche verlaufen innerhalb des Objektes. Verbindungsstiche vermeiden im Winkel des Füllmusters zu verlaufen. Das kann ihnen ein zackiges Aussehen verleihen."
 
-#: lib/elements/fill_stitch.py:670
+#: lib/elements/fill_stitch.py:701
 msgid "Error during autofill!  This means that there is a problem with Ink/Stitch."
 msgstr "Es ist ein Fehler bei der AutoFüllung aufgetreten! Das bedeutet, es gibt ein Problem mit Ink/Stitch."
 
 #. this message is followed by a URL:
 #. https://github.com/inkstitch/inkstitch/issues/new
-#: lib/elements/fill_stitch.py:673
+#: lib/elements/fill_stitch.py:704
 msgid "If you'd like to help us make Ink/Stitch better, please paste this whole message into a new issue at: "
 msgstr "Wenn du uns helfen willst Ink/Stitch zu verbessern, kopiere die gesamte Nachricht und erstelle einen neuen Fehlerbericht (Issue) auf: "
 
@@ -1211,7 +1235,7 @@ msgstr "Maximale Stichlänge"
 msgid "Maximum stitch length for split stitches."
 msgstr "Maximale Stichlänge für Zwischenstiche."
 
-#: lib/elements/satin_column.py:108 lib/elements/stroke.py:116
+#: lib/elements/satin_column.py:108 lib/elements/stroke.py:129
 msgid "Zig-zag spacing (peak-to-peak)"
 msgstr "Zick-Zack Abstand (Spitze zu Spitze)"
 
@@ -1355,118 +1379,122 @@ msgid "Length of stitches in running stitch mode."
 msgstr "Länge der Geradstiche."
 
 #: lib/elements/stroke.py:117
+msgid "All stitches must be within this distance from the path.  A lower tolerance means stitches will be closer together.  A higher tolerance means sharp corners may be rounded."
+msgstr ""
+
+#: lib/elements/stroke.py:130
 msgid "Length of stitches in zig-zag mode."
 msgstr "Stichlänge im Zick-Zack Modus."
 
-#: lib/elements/stroke.py:129
+#: lib/elements/stroke.py:142
 msgid "Number of lines"
 msgstr "Anzahl der Linien"
 
-#: lib/elements/stroke.py:130
+#: lib/elements/stroke.py:143
 msgid "Number of lines from start to finish"
 msgstr "Anzahl der Linien von Anfang bis Ende"
 
-#: lib/elements/stroke.py:146
+#: lib/elements/stroke.py:159
 msgid "Skip first lines"
 msgstr "Erste Linien überspringen"
 
-#: lib/elements/stroke.py:147
+#: lib/elements/stroke.py:160
 msgid "Skip this number of lines at the beginning."
 msgstr "Diese Anzahl an Linien am Anfang überspringen."
 
-#: lib/elements/stroke.py:158
+#: lib/elements/stroke.py:171
 msgid "Skip last lines"
 msgstr "Letzte Linien überspringen"
 
-#: lib/elements/stroke.py:159
+#: lib/elements/stroke.py:172
 msgid "Skip this number of lines at the end"
 msgstr "Diese Anzahl an Linien am Ende überspringen"
 
-#: lib/elements/stroke.py:182
+#: lib/elements/stroke.py:195
 msgid "Line distance exponent"
 msgstr "Linienabstand Exponent"
 
-#: lib/elements/stroke.py:183
+#: lib/elements/stroke.py:196
 msgid "Increase density towards one side."
 msgstr ""
 
-#: lib/elements/stroke.py:194
+#: lib/elements/stroke.py:207
 msgid "Flip exponent"
 msgstr ""
 
-#: lib/elements/stroke.py:195
+#: lib/elements/stroke.py:208
 msgid "Reverse exponent effect."
 msgstr ""
 
-#: lib/elements/stroke.py:206
+#: lib/elements/stroke.py:219
 msgid "Reverse"
 msgstr ""
 
-#: lib/elements/stroke.py:207
+#: lib/elements/stroke.py:220
 msgid "Flip start and end point"
 msgstr ""
 
-#: lib/elements/stroke.py:218
+#: lib/elements/stroke.py:231
 msgid "Grid size"
 msgstr ""
 
-#: lib/elements/stroke.py:219
+#: lib/elements/stroke.py:232
 msgid "Render as grid. Use with care and watch your stitch density."
 msgstr ""
 
-#: lib/elements/stroke.py:231
+#: lib/elements/stroke.py:244
 msgid "Scale axis"
 msgstr ""
 
-#: lib/elements/stroke.py:232
+#: lib/elements/stroke.py:245
 msgid "Scale axis for satin guided ripple stitches."
 msgstr ""
 
-#: lib/elements/stroke.py:236
+#: lib/elements/stroke.py:249
 msgid "X Y"
 msgstr ""
 
-#: lib/elements/stroke.py:236
+#: lib/elements/stroke.py:249
 msgid "X"
 msgstr ""
 
-#: lib/elements/stroke.py:236
+#: lib/elements/stroke.py:249
 msgid "Y"
 msgstr ""
 
-#: lib/elements/stroke.py:236 print/templates/ui.html:172
+#: lib/elements/stroke.py:249 print/templates/ui.html:172
 msgid "None"
 msgstr "Keine"
 
-#: lib/elements/stroke.py:244
+#: lib/elements/stroke.py:257
 msgid "Starting scale"
 msgstr ""
 
-#: lib/elements/stroke.py:245
+#: lib/elements/stroke.py:258
 msgid "How big the first copy of the line should be, in percent."
 msgstr ""
 
-#: lib/elements/stroke.py:245 lib/elements/stroke.py:256
+#: lib/elements/stroke.py:258 lib/elements/stroke.py:269
 msgid "Used only for ripple stitch with a guide line."
 msgstr ""
 
-#: lib/elements/stroke.py:255
+#: lib/elements/stroke.py:268
 msgid "Ending scale"
 msgstr ""
 
-#: lib/elements/stroke.py:256
+#: lib/elements/stroke.py:269
 msgid "How big the last copy of the line should be, in percent."
 msgstr ""
 
-#: lib/elements/stroke.py:266
+#: lib/elements/stroke.py:279
 msgid "Rotate"
 msgstr ""
 
-#: lib/elements/stroke.py:267
+#: lib/elements/stroke.py:280
 msgid "Rotate satin guided ripple stitches"
 msgstr ""
 
-#: lib/elements/stroke.py:348
+#: lib/elements/stroke.py:361
 msgid "Legacy running stitch setting detected!\n\n"
 "It looks like you're using a stroke smaller than 0.5 units to indicate a running stitch, which is deprecated.  Instead, please set your stroke to be dashed to indicate running stitch.  Any kind of dash will work."
 msgstr "Veraltete Laufstich-Einstellung erkannt!\n\n"
@@ -1872,39 +1900,39 @@ msgstr "Mögliche Lösungen"
 msgid "It is possible, that one object contains more than one error, yet there will be only one pointer per object.  Run this function again, when further errors occur.  Remove pointers by deleting the layer named \"Troubleshoot\" through the objects panel (Object -> Objects...)."
 msgstr "Es ist möglich, dass ein Objekt mehr als einen Fehler enthält. Trotzdem wird in einigen Fällen nur ein Fehler pro Objekt angezeigt. Tauchen noch weitere Fehlermeldungen auf, führe diese Funktion einfach erneut aus.  Entferne diese Hinweise durch das Löschen der Ebene \"Fehlerbehebung\" im Dialogfenster Objekte (Objekt > Objekte...)."
 
-#: lib/extensions/zip.py:62
+#: lib/extensions/zip.py:63
 msgid "threadlist"
 msgstr "Garnliste"
 
-#: lib/extensions/zip.py:71
+#: lib/extensions/zip.py:72
 msgid "No embroidery file formats selected."
 msgstr "Keine Stick-Dateiformate ausgewählt."
 
-#: lib/extensions/zip.py:99
+#: lib/extensions/zip.py:100
 msgid "Design Details"
 msgstr "Design Details"
 
-#: lib/extensions/zip.py:102
+#: lib/extensions/zip.py:103
 msgid "Title"
 msgstr "Titel"
 
-#: lib/extensions/zip.py:103 inx/inkstitch_commands_scale_symbols.inx:6
+#: lib/extensions/zip.py:104 inx/inkstitch_commands_scale_symbols.inx:6
 msgid "Size"
 msgstr "Größe"
 
-#: lib/extensions/zip.py:104
+#: lib/extensions/zip.py:105
 msgid "Stitches"
 msgstr "Stiche"
 
-#: lib/extensions/zip.py:105
+#: lib/extensions/zip.py:106
 msgid "Colors"
 msgstr "Farben"
 
-#: lib/extensions/zip.py:107
+#: lib/extensions/zip.py:108
 msgid "Thread Order"
 msgstr "Garnabfolge"
 
-#: lib/extensions/zip.py:120
+#: lib/extensions/zip.py:121
 msgid "Thread Used"
 msgstr "Verwendetes Garn"
 
@@ -2096,7 +2124,7 @@ msgstr "AutoSatin %d"
 msgid "AutoSatin Running Stitch %d"
 msgstr "AutoSatin Geradstich %d"
 
-#: lib/stitches/guided_fill.py:120
+#: lib/stitches/guided_fill.py:118
 msgid "Guide line (or offset copy) is self crossing!"
 msgstr "Die Führungslinie (oder eine verschobene Kopie) überschneidet sich selbst!"
 
@@ -3211,6 +3239,14 @@ msgstr "Maximaler Abstand zwischen zwei Objekten ohne vernähen (mm)"
 msgid "Jump stitches smaller than this will be treated as normal stitches."
 msgstr "Sprungstiche, die kleiner sind, werden als normale Stiche behandelt."
 
+#: inx/inkstitch_embroider_settings.inx:20
+msgid "Minimal stitch length (mm)"
+msgstr ""
+
+#: inx/inkstitch_embroider_settings.inx:20
+msgid "Drop stitches smaller than this value."
+msgstr ""
+
 #: inx/inkstitch_flip.inx:3
 msgid "Flip Satin Column Rails"
 msgstr "Konturen der Satinsäulen umkehren"